Let $chi_{Delta}(mathbb{R}^{n})$ denote the minimum number of colors needed to color $mathbb{R}^{n}$ so that there will not be a monochromatic equilateral triangle with side length $1$. Using the slice rank method, we reprove a result of Frankl and Rodl, and show that $chi_{Delta}left(mathbb{R}^{n} ight)$ grows exponentially with $n$. This technique substantially improves upon the best known quantitative lower bounds for $chi_{Delta}left(mathbb{R}^{n} ight)$, and we obtain [ chi_{Delta}left(mathbb{R}^{n} ight)>(1.01446+o(1))^{n}. ]

Predicting the spatial configuration of gas molecules in nanopores of shale formations is crucial for fluid flow forecasting and hydrocarbon reserves estimation. The key challenge in these tight formations is that the majority of the pore sizes are less than 50 nm. At this scale, the fluid properties are affected by nanoconfinement effects due to the increased fluid-solid interactions. For instance, gas adsorption to the pore walls could account for up to 85% of the total hydrocarbon volume in a tight reservoir. Although there are analytical solutions that describe this phenomenon for simple geometries, they are not suitable for describing realistic pores, where surface roughness and geometric anisotropy play important roles. To describe these, molecular dynamics (MD) simulations are used since they consider fluid-solid and fluid-fluid interactions at the molecular level. However, MD simulations are computationally expensive, and are not able to simulate scales larger than a few connected nanopores. We present a method for building and training physics-based deep learning surrogate models to carry out fast and accurate predictions of molecular configurations of gas inside nanopores. Since training deep learning models requires extensive databases that are computationally expensive to create, we employ active learning (AL). AL reduces the overhead of creating comprehensive sets of high-fidelity data by determining where the model uncertainty is greatest, and running simulations on the fly to minimize it. The proposed workflow enables nanoconfinement effects to be rigorously considered at the mesoscale where complex connected sets of nanopores control key applications such as hydrocarbon recovery and CO2 sequestration.

Previous methods on estimating detailed human depth often require supervised training with `ground truth' depth data. This paper presents a self-supervised method that can be trained on YouTube videos without known depth, which makes training data collection simple and improves the generalization of the learned network. The self-supervised learning is achieved by minimizing a photo-consistency loss, which is evaluated between a video frame and its neighboring frames warped according to the estimated depth and the 3D non-rigid motion of the human body. To solve this non-rigid motion, we first estimate a rough SMPL model at each video frame and compute the non-rigid body motion accordingly, which enables self-supervised learning on estimating the shape details. Experiments demonstrate that our method enjoys better generalization and performs much better on data in the wild.

Titanocenes containing two 5-membered cyclodienyl groups, for example cyclopentadienyl, and one or two 6-membered carbocyclic or 5- or 6-membered heterocyclic aromatic rings which are substituted by a fluorine atom in at least one of the two ortho-positions to the titanium-carbon bond and contain, as a further substituent, unsubstituted or substituted 1-pyrryl, are suitable as photoinitiators for radiation-induced polymerization of ethylenically unsaturated compounds.

A process for the production of nanocrystals or amorphous nanoparticles of actives (nanomaterials), especially from the peels of grapes. A dispersion of a micrometer-sized material in a solution of surfactant or a steric stabilizer is first provided. The macrosuspension is then stirred for at least 1 minute at a rotational speed above 500 rpm using a rotor-stator mixer. The stirred mixture is passed through a jet stream or piston-gas type high pressure homogenizer. The nanomaterials produced can be incorporated into formulations for use as nutraceutical, nutritional supplement, or as supportive treatment in medical therapy. The active can be derived from the peels of grapes.

A process is provided for recovering aliphatic monocarboxylic acids having from 4 to 11 carbon atoms from the distillation residue obtained in the oxidation of the corresponding aldehyde by means of oxygen or oxygen-containing gas mixtures in the presence of alkali metal carboxylates or alkaline earth metal carboxylates to form the corresponding monocarboxylic acid and subsequent distillation, characterized in that the distillation residue is reacted with an aqueous acid in a tube reactor and the two-phase mixture flowing out from the tube reactor is introduced into a settling vessel in which the organic phase which separates out has a pH of 4.5 or less.

The present invention features monocyclic cyanoenone compositions and methods for using the same in the treatment of diseases such as cancer, inflammatory diseases and neurodegenerative diseases.

Methods are disclosed for synthesizing nanocomposite materials including ferromagnetic nanoparticles with polymer shells formed by controlled surface polymerization. The polymer shells prevent the nanoparticles from forming agglomerates and preserve the size dispersion of the nanoparticles. The nanocomposite particles can be further networked in suitable polymer hosts to tune mechanical, optical, and thermal properties of the final composite polymer system. An exemplary method includes forming a polymer shell on a nanoparticle surface by adding molecules of at least one monomer and optionally of at least one tethering agent to the nanoparticles, and then exposing to electromagnetic radiation at a wavelength selected to induce bonding between the nanoparticle and the molecules, to form a polymer shell bonded to the particle and optionally to a polymer host matrix. The nanocomposite materials can be used in various magneto-optic applications.

A mechanochromic coating composition is disclosed comprising a polymeric network incorporating a plurality of ring-opening mechanophores each bound at two positions thereof within said polymeric network.

Iron/carbon (Fe/C) nanocomposite catalysts are prepared for Fischer-Tropsch synthesis reaction. A preparation method includes steps of mixing iron hydrate salts and a mesoporous carbon support to form a mixture, infiltrating the iron hydrate salts into the carbon support through melt infiltration of the mixture near a melting point of the iron hydrate salts, forming iron-carbide particles infiltrated into the carbon support through calcination of the iron hydrate salts infiltrated into the carbon support under a first atmosphere, and vacuum-drying the iron-carbide particles after passivation using ethanol. Using such catalysts, liquid hydrocarbons are produced.

An inorganic nanolayer surface coated polymer film product is disclosed with enhancements such as improved metallization capability, low cost, low polymer additives and modifiers, improved recyclability, and good web properties. Also method for priming a flexible film substrate to enhance the reactivity or wettability of the substrate for metallization is disclosed. A substrate film is coated with one or more nanolayers of a metal or metal oxide applied by CCVD and/or PECVD at open atmosphere. The deposited coating acts to enhance the surface energy of the film substrate and to and reduce the surface gauge variation of the substrate or supporting film, thereby enhancing the wettability of the film substrate for metallization and/or to improve the anti-block characteristics of the film. The deposited coatings may also act as a barrier layer for lowering the permeability of light, gas and vapor transmission through the substrate.

Disclosed are compositions and methods of making non-glycosylated transferrin protein in transgenic monocot plants.

A modular process for organosolv fractionation of lignocellulosic feedstocks into component parts and further processing of said component parts into one or more of a de-lignified cellulose stream, a sugar stream, small-chain alcohol streams and four structurally distinct classes of lignin derivatives. The modular process comprises a first processing module configured for digesting lignocellulosic feedstocks with an organic solvent thereby producing a cellulosic solids fraction and a liquid fraction, a second processing module configured for recovering small-chain alcohols and optionally a first class of lignin derivatives from the cellulosic solids fraction, a third processing module configured for recovering from the liquid fraction at least one of a second class and a third class of lignin derivatives or mixtures thereof, and waste stream comprising a fourth class of lignin derivatives. The fourth processing module may optionally recover the fourth class of lignin derivatives.

The present invention describes an inoculation process for inoculating a nucleating additive to a cast iron alloy in a pouring distributor by means of using a transferred arc plasma torch, with an anode partially immersed in the cast iron alloy and a cathode located on the surface of said alloy, the anode or the cathode or both comprising graphite, preferably synthetic crystalline graphite, which supplies said nucleating additive to the iron alloy. The invention thus describes an inoculation device useful for carrying out the inoculation process.

The disclosure relates to anti-glial maturation factor beta (“GMF-B”) monoclonal antibodies (mAbs) and fragments thereof, as well as hybridoma lines that secrete antibodies or fragments. Therapeutic and diagnostic uses of such antibodies, including treatment and detection of cancer and dementia, and methods and kits for detecting cells or samples expressing GMF-B, including soluble GMF-B, are also encompassed.

The invention relates to melanocortin receptor-specific cyclic peptides of Formula (I) or a pharmaceutically acceptable salt thereof, where R1, R2, R3, R4a, R4b, R4c, R5, x and y are as defined in the specification. These compounds are particularly useful in the treatments of energy homeostasis and metabolism related (e.g. diabetes), food intake related and/or energy balance and body weight related diseases, disorders and/or conditions, including obesity, overweight and diseases, disorders and/or conditions associated with obesity and/or overweight, such as type 2 diabetes and metabolic syndrome.

In one aspect, hollow nanoparticles are described herein. In some embodiments, a hollow nanoparticle comprises a metal shell and a cavity substantially defined by the shell, wherein the shell has a thickness greater than or equal to about 5 nm and the cavity has a curved surface. In another aspect, methods of making hollow nanoparticles are described herein. In some embodiments, a method of making hollow nanoparticles comprises forming a plurality of gas bubbles and forming a shell on the surface of at least one of the plurality of gas bubbles, wherein at least one of the gas bubbles is electrochemically generated. In another aspect, composite particles are described herein. In some embodiments, a composite particle comprises at least one nanoparticle and a polycrystalline metal shell substantially encapsulating at least one nanoparticle, wherein at least one surface of at least one nanoparticle is not in contact with the shell.

Plant viral vectors have great potential in rapid production of proteins, but no simple. Here a geminivirus-based system for high-yield and rapid production of oligomeric protein complexes, including virus-like particle (VLP) vaccines and monoclonal antibodies (mAbs) is described. In particular, a single vector that contains two non-competing replicons for transient expression in Nicotiana benthamiana leaves is described. The correct assembly of these subunit proteins into functional oligomeric structures (VLPs or full-size mAb) is also described. This system advances plant transient expression technology by eliminating the need for non-competing viruses, and thus, enhances the realistic commercial application of this technology for producing multiple-subunit protein complexes.

The present invention relates to a polymer composition that includes a polymer having at least one polymer segment represented by the following Formula (I), With reference to Formula (I): M independently for each w is a residue of a monomer; φ is a residue of a mechanochromic compound having at least two reactive groups that are each independently bonded to one monomer residue M; w, independently for each z, is an integer of at least 1; and z is an integer of at least 2. The mechanochromic compound is selected from at least one of the following, (a) a spirooxazine compound represented by the following Formula (II), and (b) an indenonaphthopyran represented by the following Formula (III),

Monoclonal antibodies (mAbs) having thyroid stimulating activity (TSAb), especially full or considerably agonistic activity, or thyroid blocking activity (TBAb), which are obtainable by genetic immunization of mice, or fragments (F(ab')2, Fab or Fv) or humanized forms of such monoclonal antibodies or single chain forms (SCA; scFv) of such fragments, which antibodies, or their fragments, compete with bovine TSH for epitopes of the human TSHr, compete with autoantibodies from sera from Graves' patients as well as with autoantibodies from sera from patients harboring blocking autoantibodies for epitopes of the human TSHr, bind to conformational epitopes of the human TSHr located in the first 281 amino acids of the human TSHr, and usually also bind to TSFR receptors (TSHr) from different animals. Various uses of such antibodies, or of peptides corresponding to variable regions of such antibodies, are also described and claimed.

Use of two different methods, either each by itself or in combination, to enhance the stiffness, strength, maximum possible use temperature, and environmental resistance of thermoset polymer particles is disclosed. One method is the application of post-polymerization process steps (and especially heat treatment) to advance the curing reaction and to thus obtain a more densely crosslinked polymer network. The other method is the incorporation of nanofillers, resulting in a heterogeneous “nanocomposite” morphology. Nanofiller incorporation and post-polymerization heat treatment can also be combined to obtain the benefits of both methods simultaneously. The present invention relates to the development of thermoset nanocomposite particles. Optional further improvement of the heat resistance and environmental resistance of said particles via post-polymerization heat treatment; processes for the manufacture of said particles; and use of said particles in the construction, drilling, completion and/or fracture stimulation of oil and natural gas wells are described.

A manual marine winch includes a safety knockout override preventing release of winch tension without the handle in stowed position. The winch includes a housing; a rotating drum on the housing; a winch line on the drum; a control for spooling and un-spooling the winch line on the drum, wherein the control includes a handle for selectively tensioning the drum and moveable between a position engaged with the drum and a disengaged stowed position; a tension holding mechanism on the housing comprising a ratchet gear coupled to the drum, a pawl selectively engaged with the ratchet gear, and a knockout configures to selectively disengage the pawl from the gear to allow for release of winch tension; and a safety knockout override coupled to the housing and selectively engaged by the handle and configured to prevent release of winch tension when the handle is not in the stowed position.

The invention concerns a composition comprising as component (A): 10% to 97% by weight, based on the total weight of the composition, of one or more monocarboxylic esters of the general formula R1—CO—OR2, in which R1 is a saturated or unsaturated, branched or straight-chain, aliphatic group having 11 to 23 carbon atoms and R2 is a branched or straight-chain aliphatic group, a cycloaliphatic group or aromatic group having 1 to 13 carbon atoms, and the sum of the carbon atoms of the groups R1 and R2 is not more than 30, the monocarboxylic ester or esters possessing a boiling point of more than 250° C. under a standard pressure of 101.3 kPa, and as component (B): 3% to 90% by weight, based on the total weight of the composition, of one or more dispersants, the composition possessing a viscosity at 25° C. of less than 5000 mPas. The invention further concerns the use of the composition as a dispersion medium, millbases obtained from the composition, and the use of the millbases.

Method for fast pyrolysis of lignocellulose including: mechanically comminuting the lignocellulose to lignocellulose particles; at least one of completely drying and preheating the lignocellulose particles; mixing the lignocellulose particles with heat transfer particles so as to provide a mixture; heating the heat transfer particles, prior to the mixing, to a temperature between 500° C. and 650° C.; and heating, in a pyrolysis reactor with oxygen excluded, the lignocellulose particles using the heat transfer particles so as to establish a temperature between 400° C. and 600° C. for 1 to 50 seconds and so as to react the lignocellulose particles so as to provide pyrolysis coke, pyrolysis condensate, and pyrolysis gas.

A composition of matter, and method to make same, for a nano-based material including a nanocarbon support to which is attached an aliphatic amine. In particular, the composition of matter is an aliphatic amine-nanocarbon material that includes a nanocarbon (NC) support, such as C60, nano-graphite, graphene, nanocarbon ribbons, graphite intercalation compounds, graphite oxide, nano-coal, nanohorns, and combinations thereof, and further includes an aliphatic amine, such as polyethyleneimine (PEI).

The invention relates to a method for obtaining cellulose by separating lignin from a biomass comprising lignocellulose in the form of plants or plant parts, wherein the biomass comprising lignocellulose is solubilized in a boiler in an alkaline medium comprising alkanol amine, and dissolved lignin is separated from the resulting raw cellulose. Said method is characterized in that the biomass comprising lignocellulose is not from a wood source, and is solubilized at a temperature of less than approximately 170° C. in a solubilizing agent based on alkanol amine and water, wherein the weight ratio of alkanol amine to water is set to 80:20 to 20:80, and raw cellulose thus produced is separated from the waste lye using a typical method. Said method is particularly advantageous for obtaining cellulose from annual plants, particularly wheat straw. The method is advantageously improved in that the solubilization takes place in the presence of a catalyst, particularly of anthrachinon. An advantageous bleaching process may be performed subsequently. Said method is characterized by great economic efficiency, particularly due to the high reclamation rates of the alkanol amine used, and leads to lower environmental impact in wastewater, and to reduced disposal costs. The design of the method leads to a greater yield of cellulose and largely prevents degradation of alkanol amine, particularly monoethanol amine (MEA).

Method for production of cellulose and hemicellulose fibers from lignocellulose biomass obtained from sugarcane leaves and buds by applying a process comprising the stages of: a) Diminishing the particle size of the lignocellulose biomass to a range between 3 and 15 mm, b) Subjecting the product obtained to treatment with one or more solvents and/or a mixture of specific catalysts, c) Carry out sudden decompression to an atmospheric pressure, d) Collecting the pretreated material in a cyclone, e) Optionally separating the liquid and solid fractions through washing and filterung f) Optionally, treating the solid fraction in a reactor with a mixture of ethanol and chlorine dioxide, d) Wash the product obtained to achieve cellulose efficiency above 50% and of lignin of 5 to 7%, fiber lengtht in a range to 1,5 to 2,7 mm, breaking length (km) of 7,0 -8,9, Burst index (kPam2/g) of 4,5-7,2 and Tear index (mNm2/g) of 8,2-8, The obtained high-resistance cellulose and hemicellulose is especially suitable for the paper production and polymer-type plastics.

The invention provides methods and compositions for improving the characteristics of paper substrates. The method involves adding to a paper substrate an NCC-polymer. NCC-polymers have unique chemical properties which result in improvements in wet strength, dry strength and drainage retention properties of the paper substrates.

An intermediate article of manufacture formed as a first stage bead area subassembly for a split ply pneumatic tire carcass is disclosed. The bead area subassembly has an annular bead core; a bead apex; a ply strip; and preferably a sidewall affixed to the ply strip. The subassembly is formed into a disk-shaped bead area monocomponent. The ply strip is wrapped about the bead core and the apex to form a ply turnup and both the ply strip and the ply turnup extend radially outwardly from the bead core. The bead area subassembly when formed into the disk-shaped bead area monocomponent is placed on an annular holder device. The combination of the bead area monocomponent on the holder device can be stacked for storage and latter assembly into a split ply carcass. Preferably, the ply turnup can be oriented extending inside or axially inward of the bead core on final assembly to form a split ply tire having axially inside turnups. In the preferred embodiment the ply strip is reinforced by radially extending ply cords.

Methods of forming metal matrix nanocomposites are provided. The methods include the steps of introducing a master metal matrix nanocomposite into a molten metal at a temperature above the melting temperature of the master metal matrix nanocomposite, allowing at least a portion of the master metal matrix nanocomposite to mix with the molten metal and, then, solidifying the molten metal to provide a second metal matrix nanocomposite.

Provided is a method of preparing a nanocrystalline titanium alloy at low strain to have better strength. The present invention is characterized in that an initial microstructure is induced as martensites having a fine layered structure, and then a nanocrystalline titanium alloy is prepared at low strain by optimizing process variables through observation of the effects of strain, strain rate, and deformation temperature on the changes in the microstructure.

The present disclosure provides antibodies, and antigen-binding fragments thereof that bind to EBOV glycoprotein. The present disclosure further provides hybridoma cell lines and methods for making and using the compositions provided herein.

The invention relates to a human Interleukin-2 (hIL-2) specific monoclonal antibody (mAb), or antigen binding fragment thereof, the binding of which to hIL-2 inhibits binding of hIL-2 to CD25 and the antibody is characterized by any of the parameters: the variable chain of the mAb comprises the amino acid sequence of SEQ ID NO 005 or SEQ ID NO 006; the binding to hIL-2 is characterized by a dissociation constant (KD)≦7.5 nmol/L; the binding to hIL-2 is characterized by an off-rate (Koff)≦1×10−4 s−1 and/or the antibody displays no measurable cross-reactivity to murine IL-2.

This invention relates to novel monoclonal antibodies that specifically bind to the alpha-folate receptor. In some embodiments, the antibodies inhibit a biological activity of folate receptor-α (FR-α). The antibodies are useful in the treatment of certain cancers, particularly cancers that have increased cell surface expression of the alpha-folate receptor (“FR-α”), such as ovarian, breast, renal, colorectal, lung, endometrial, or brain cancer. The invention also relates to cells expressing the monoclonal antibodies, antibody derivatives, such as chimeric and humanized monoclonal antibodies, antibody fragments, and methods of detecting and treating cancer using the antibodies, derivatives, and fragments.

There are described powders comprising agglomerated nanocrystals of an electroactive alloy and oxygen. The main component of the alloy can be of nickel, cobalt, iron or mixtures thereof while the alloying element is one or more transition metals such as Mo, W, V, the alloy also including oxygen. Preferably the nanocrystals will be made of an alloy of nickel, molybdenum and oxygen. An electrode which is used by compacting the powders is also disclosed. Also disclosed, is a process for producing the powders by providing particles of nickel, cobalt and iron or oxides thereof with particles of at least one transition metal, (Mo, W, V) or oxides thereof and subjecting the particles to high energy mechanical alloying such as ball milling under conditions which include oxygen and for a sufficient period of time to produce a nanocrystalline alloy. Electrodes produced from these powders have an electrocatalytic activity for the hydrogen evolution which is comparable or higher than the electrodes which are presently used in the electrochemical industry. Moreover, these materials present an excellent chemical, electrochemical and mechanical stability. When use as a cathode the powders are useful in water electrolyzers, in chlor-alkali or the like cells.

A process of covalently modifying a lignocellulosic material is provided. The process includes oxidizing a lignocellulosic material having hydroxyl groups with an oxidant to oxidize at least a portion of the hydroxyl groups to carboxylic acid groups, optionally activating the carboxylic acid groups with an activating agent to form activated carboxylic acid groups, and reacting the carboxylic acid groups or the activated carboxylic acid groups with a first nitrogen-containing reagent selected from amino acids, peptides, or protected derivatives thereof to provide a treated lignocellulosic material. The treated lignocellulosic materials thus prepared displays resistance to degradation.

A method includes coating a substrate to provide a flame resistant substrate. In an embodiment, the method includes exposing the substrate to a cationic solution to produce a cationic layer deposited on the substrate. The cationic solution comprises cationic materials. The cationic materials comprise a polymer, a colloidal particle, a nanoparticle, a nitrogen-rich molecule, a geopolymer, a carbon-based filler, or any combinations thereof. The method also includes agitating the substrate. The method further includes exposing the cationic layer to an anionic solution to produce an anionic layer deposited on the cationic layer to produce a layer comprising the anionic layer and the cationic layer. The anionic solution comprises a layerable material.

The device for tapping and inoculating trees includes an elongate, main arm having an actuating mechanism attached to one end and a housing attached to the opposite end. A cutting mechanism extends from one side of the housing and a spray system is disposed in a recess in the housing. A universal actuator operates both the cutting mechanism and the spray system upon activation by the actuating mechanism. The cutting mechanism taps or scrapes the bark off the target branch and the spray system sprays a solution that stimulates the tapped area into producing more sap and sap of higher quality.

An energy harvesting device includes: a first nanoporous electrode and a second nanoporous electrode, each of which is configured to which store electrical charge; a first current collector connected to the first nanoporous electrode and a second current collector connected to the second nanoporous electrode; and an enclosure that contains the first and second nanoporous electrodes and the first and second current collectors and transfers a force applied from the outside to the first nanoporous electrode and the second nanoporous electrode, wherein at least one of the first nanoporous electrode and the second nanoporous electrode comprises an ion conductive polymer.

A vacuum-assisted in-needle capillary adsorption trap (VA-INCAT) device for sampling and delivering materials to an analytical device is disclosed. A sorbent is multiwall carbon nanotube/polyaniline (PANI/MWCNT) nanocomposite and is coated within an interior space of the needle between the second end and the side aperture to entrap an analyte within a sample. The VA-INCAT device also includes a vacuum device configured to vacuum the vacuum flask to improve the extraction of the analytes vapors from the sample matrix to the sorbent bed.

Systems and devices incorporating radiation detection, and techniques and materials for improved radiation detection are provided that involve a nano-scintillator exhibiting a linear luminescent emission response to stimulating electromagnetic radiation. The nano-scintillator can include at least one nanocrystal comprising a rare earth element, a lanthanide dopant, and a spectator dopant, wherein the nanocrystal exhibits a linear luminescent emission response to stimulating electromagnetic radiation of wavelengths less than 100 nm. As one example, the nanocrystal is [Y2-xO3; Eux, Liy], where x is 0.05 to 0.1 and y is 0.1 to 0.16, and has an average nanoparticle size of 40 to 70 nm. These nanocrystals can be fabricated through a glycine combustion method.

The present invention relates to the use of 1,1-diethoxyethane for increasing the knocking resistance of low-boiling gasoline with an initial boiling point (IBP) of 80° C. to 120° C. by at least 40 units (Research Octane Number).

The present invention relates to an in vitro method of diagnosing chronic myelomonocytic leukemia (CMML) in a subject, said method comprising the steps of: a) Detecting a monocyte population in a biological sample from said subject; b) Quantifying the CD14+/CD16− monocytes in said biological sample; c) Comparing the value of step b) to a reference value; and d) Diagnosing CMML based on said comparison. Preferably, said detecting step a) is performed by an exclusion gating strategy by flow cytometry.

A population of bright and stable nanocrystals is provided. The nanocrystals include a semiconductor core and a thick semiconductor shell and can exhibit high extinction coefficients, high quantum yields, and limited or no detectable blinking.

AMBULANCE crews rushed to the scene of a football match in Hythe after a player was knocked unconscious.

A HAMPSHIRE student is celebrating boxing success after giving a knockout performance in a national competition.

DEVELOPERS are planning to bulldoze a landmark hotel and replace it with up to 65 flats for the elderly, the Daily Echo can reveal.

A course aiming to assist the international drive to protect the world’s tree population is once again being hosted by the University of Wolverhampton.

Viele Anleger wähnen sich und ihre Börseninvestments bereits in einem neuen Aufschwung. Doch einige der bekanntesten Investoren mahnen zur Vorsicht. Ihre Szenarien sind deutlich negativer. Dabei haben sie die Historie der vergangenen Crashs auf ihrer Seite.