The Connectivity Center offers a variety of products to improve PC security and protect your data and your network.

Source One Management Services to lend their decades of procurement insights and experience to produce ExecIn- a private event for supply chain leaders during ISM2018.

Isolated Data Tier Service Launches Today with an Exclusive Approach to Storage

Secure IoT® is the industry's first solution to run and protect any "thing" while reducing customer costs.

On World Malaria Day, April 25, GFA World new report cites lifesaving impact of malaria-fighting efforts across Asia

BioCure Regenerative Medicine Offers a More Effective Orthopedic Option than Surgery

Source One will sponsor the upcoming IMPACT Smart Manufacturing Summit and share best practices for thriving through the next recession.

Source One Separates Procurement Transformation Facts from Fiction in New Whitepaper

Corcentric's Source-to-Pay Team will Discuss Mapping a Procurement Transformation at Sourcing Outlook 2019.

ISM-Chicago's Emerging Leaders Committee to Host Panel on Bridging the Talent Gap

Investment drives next wave of growth and supports expansion into new markets

Edgescan and Aon deliver global 'fullstack' vulnerability management

During this time of crisis, many people are beginning to experience the strain a worldwide pandemic can have on our collective financial wellbeing. Knowing what options are available and where one can find emergency funding is a must.

"Not everyone who supports BDS is an anti-Semite. However - if you look at the organisational papers of the BDS movement, and listen to what the people behind it say, it is clearly antisemitism - plain and simple."

Company certified as one of only three providers authorized to offer distributed solar energy with no capital cost

Terralogic Solutions Inc. supports the design and development of secure, mission-critical embedded solutions using BlackBerry QNX technologies

Interracialmatch: Love Me Love My Color

Source One will Talk Tariffs and Trade War Uncertainty in an Upcoming Webinar for ISM-New Jersey

Funds will be deployed to help BlocWatch expand its blockchain management platform used for enterprise implementations of Hyperledger Fabric, Ethereum, and Corda.

DSPEC selected and qualified as a GSA MOBIS contractor to provide management and consulting services that improve federal agency performance and help meet the government's mission goals.

Years in the making, the Setting Every Community Up for Retirement Enhancement (SECURE) Act was included in one of the two "minibus" appropriations bills that fund the federal government for the rest of the 2020 fiscal year

Titan Funding has secured funding for acquisition of a 327,000-square-foot property to be redeveloped as a Cannabis Campus

The HASHWallet Indiegogo campaign is out! Sign up and get 30% off and Free Vault service.

This week in government affairs: NECA opposes bill to raise top tax rate for pass-throughs, NECA member testifies before the house small business committee and NECA Wins in NDAA.

1. NECA Wins in Year-End Funding Bills

On December 17, 2019, Congress passed two funding bills, H.R. 1158, FY2020 Consolidated National Security Appropriations Package and H.R. 1865, FY2020 Consolidated Domestic and International Assistance Package, both resulting in big wins for NECA contractors.

NECA’s Look Ahead: In addition to ensuring the full operation of the federal government for the remainder of Fiscal Year 2020, several of NECA’s top legislative priorities were included:

• Full repeal of the Affordable Care Act’s (ACA’s) 40 percent “Cadillac Tax”

• Allowing 529 savings accounts to be used for costs associated with Department of Labor (DOL) registered apprenticeship programs

• Seven-year reauthorization of the Terrorism Risk Insurance Program

• Extension of the National Flood Insurance Program

• Full repeal of health insurance tax (HIT) and the medical device excise tax

• Seven-year authorization of the U.S. Export-Import Bank

• An extension of 179D energy efficiency tax deduction retrospectively from 2017 and prospectively through 2020

• $1 billion for Better Utilizing Investments to Leverage Development (BUILD) grants

Summaries of the package can be found below:

Full Package Summary – H.R. 1158

Full Package Summary – H.R. 1865

Division Q – Summary (Revenue Provision Amendment)

2. USMCA Passes the House

On December 19, 2019, the House passed, in a 385 to 41 vote, the NECA-supported United States-Mexico-Canada Agreement (USMCA), H.R. 5430, to replace the North American Free Trade Agreement (NAFTA).

NECA’s Look Ahead: Now that the USMCA has passed the House, it will move to the Senate. Under the Trade Promotion Authority (TPA), the bill procedurally spends up to 15 legislative session days in the Senate Finance Committee. Then, there are up to 15 session days for the Senate to vote on the floor. With Impeachment Articles passed from the House taking precedent, USMCA is unlikely to see a Senate vote any time before late February.

3. Impeachment Update

On December 18, 2019, the House of Representatives took up impeachment procedure and  passed H. Res. 755 – “Impeaching Donald John Trump, President of the United States, for high crimes and misdemeanors” by a vote of  230 – 197, 1 for Article I and by a vote of 229 – 197, 1 for Article II.

NECA’s Look Ahead: It remains unclear when the two articles of impeachment will reach the Senate. When they do arrive to the Senate, it is expected that the Senate will begin the trail immediately.  

1. Administration Calls for Additional Funding for PPP

One of the most popular programs created in the CARES Act, the Paycheck Protection Program (PPP), has released over $70 billion to small businesses to help them remain viable during this pandemic. Due to the large demand, the Administration has requested additional funding for that program in a letter to Congressional leaders.

NECA’s look Ahead: Senate Democrats requested an additional $250 billion for hospitals and local governments in addition to funding for the PPP while Republican leaders argued that funding for the PPP is the only account that requires additional immediate funding at this time. The Senate adjourned on April 9, 2020 unable to pass additional funding for the PPP under unanimous consent.

2. Treasury Guidance Clarifies Qualifications for PPP Borrowers

With the passage of the CARES Act, many agencies have been scrambling to enact the reforms and programs developed in rapid time. One such program, the Paycheck Protection Program, which allows substantial loans to be granted under favorable terms by the Small Business Administration, came under scrutiny for potentially requiring businesses to meet both size and revenue requirements instead of just the size requirements (under 500 employees) originally required. While this scrutiny came from an over-cautious interpretation of an earlier guidance, the Treasury Department offered additional guidance to make it clear to borrowers that they may meet either the revenue standards listed under a given NAICS code or qualify by having less than 500 employees. 

NECA’s Look Ahead: NECA worked with key leaders once the CARES Act was signed into law to attain greater clarity on this issue for our contractors. This new change will give NECA contractors the predictability they need to move forward with the new SBA loan program. We will continue to monitor the implementation of the CARES Act and continue to maintain in constant conversation with Congressional staff and agency officials to communicate the needs of our members. 

3. DOD Releases Rule on Payment to Small Business Contractors

Earlier this week the Department of Defense (DOD) released a final rule on the defining and implementation of accelerated payments to classified small businesses under DOD contracts. The rule (DFARS Case 2018–D068) which finalizes the implementation of a section from 2019’s National Defense Authorization Act urges the federal government to pay small business contractors within 15 days of the receipt of a proper invoice. While this is only a goal for the federal government and not a direct mandate, which NECA advocated for in the past, we view this final rule and its upcoming full implementation as a positive step forward.

NECA’s Look Ahead: We encourage NECA contractors to read the final rule and monitor its implementation on DOD contracts. With your feedback and on-the-ground experiences, we will be better able to make lawmakers and agency officials aware of its progress.

The Enterprise Viewer enables users to view all types of content (documents, images, audio and video) and collaborate using powerful editing tools and chat windows

The yen, which investors typically snap up as a safe haven in times of financial market stress, fell nearly 10% against the dollar this month, as pandemic fears spurred a stampede into the refuge of the world's most powerful currency.

Warm, dry weather conditions have led to additional growth on the Ikes Fire, which is now approximately 1,535 acres and 20% contained. Smoke settled into the Grand Canyon overnight as temperatures cooled but smoke may begin to lift as temperatures warm up throughout the day. https://www.nps.gov/grca/learn/news/ikes-fire-spreads-crews-secure-planning-area-20190815.htm

A plant extract combination of fruits, leaves, and roots seems to help relieve hangover symptoms, reveals new research from BMJ.

The post Drink Made From Fruit and Plant Extracts May Be the Scientifically-Backed Hangover Cure We’ve Been Waiting For appeared first on Good News Network.

As part of the 10-year socioeconomic monitoring of the Northwest Forest Plan, this report evaluates changes in Forest Service and Bureau of Land Management (BLM) procurement contracting between 1990 and 2002 by asking, (1) How much and what kind of work did the Forest Service and BLM contract during this period, and (2) who received economic benefits from this procurement contracting? Procurement contracting is a particular focus of the socioeconomic monitoring because one expectation of the Northwest Forest Plan was that the Forest Service and BLM would create high-skill, high-wage private sector jobs in public land restoration through contracting to partially offset job losses in timber production, harvesting, and processing. This report finds that, to the contrary, the Forest Service reduced its contracting of land management activities on national forests in the Northwest Forest Plan area from a high of $103 million in 1991 to a low of $33 million in 2002. By contrast, BLM spending was fairly constant at just under $20 million annually. Both the Forest Service and the BLM changed the type of activities that they contracted, shifting from activities associated with intensive forest management such as tree planting in clearcuts to activities associated with ecosystem management. Contractors located near national forests and BLM lands and rural communities captured a similar proportion of contracts in both the earlier and later parts of the study period. However, the significant decline in Forest Service contract spending resulted in considerable decline in the amount of money flowing to rural communities through contracting. Thus, it is unlikely that federal land management contracting created a net increase in jobs to replace jobs lost in mills and logging operations in public lands communities.

The internet is an excellent resource for all kinds of information. However, with all of its advantages, there are also some things that you need to pay attention too. Knowing how to secure a website is a must, and anyone with an online identity needs to pay attention to this. As the internet can also […]

Cognitive radio is a promising technology to improve spectral efficiency. However, the secure performance of a secondary network achieved by using physical layer security techniques is limited by its transmit power and channel fading. In order to tackle this issue, a cognitive unmanned aerial vehicle (UAV) communication network is studied by exploiting the high flexibility of a UAV and the possibility of establishing line-of-sight links. The average secrecy rate of the secondary network is maximized by robustly optimizing the UAV's trajectory and transmit power. Our problem formulation takes into account two practical inaccurate location estimation cases, namely, the worst case and the outage-constrained case. In order to solve those challenging non-convex problems, an iterative algorithm based on $mathcal{S}$-Procedure is proposed for the worst case while an iterative algorithm based on Bernstein-type inequalities is proposed for the outage-constrained case. The proposed algorithms can obtain effective suboptimal solutions of the corresponding problems. Our simulation results demonstrate that the algorithm under the outage-constrained case can achieve a higher average secrecy rate with a low computational complexity compared to that of the algorithm under the worst case. Moreover, the proposed schemes can improve the secure communication performance significantly compared to other benchmark schemes.

WordPress powers 35% of all websites, which makes WordPress sites a go-to target for hackers. If you’re like most WordPress site owners, you’re probably asking the same question: Is my WordPress site secure? While you can’t guarantee site security, you can take several steps to improve and maximize your WordPress security. Keep reading to learn […]

The post Is My WordPress Site Secure? 13 Tips for Locking Down Your WordPress Site appeared first on WebFX Blog.

A crosslinkable curing super-branched polyester and the cured product and the preparation method thereof are disclosed. The super-branched polyester has high refractive index and comprises a compound represented by the following structural formula (I). In the formula (I), HBP is the backbone of the super-branched polyester; both a and b are positive integers; the sum of a and b is less than or equal to n; n is more than or equal to 10 and less than 80. In the super-branched polyester, A is represented by formula (II) and N is represented by formula (III), wherein R is methyl or hydrogen atom; the mole ratio of N relative to the total mole of A and N is more than 30 mol %, and the ratio of the total mole of A and N relative to the product of the total mole of HBP backbone and n is more than 0.5 and less than or equal to 1.

A heat-resistant cured product is efficiently produced by obtaining a semi-cured product where a curable resin composition containing a (meth)acrylate monomer, a non-conjugated vinylidene group-containing compound and a thermal radical-polymerization initiator is processed by at least one of photoirradiation and heating to give a semi-cured product having a complex viscosity of from 105 to 108 mPa·s at 25° C. and at a frequency of 10 Hz; and putting the semi-cured product in a forming die for pressure formation therein, and heating it therein for thermal polymerization to give a cured product.

Various embodiments described herein relate to apparatus for executing software in a secure computing environment. A secure processor can be used and configured to request a context swap from a first context to a second context when switching execution from a first portion of software to a second portion of software. A context manager, which can be in communication with the secure processor, can be configured to receive and initiate a requested context swap. A trust vector verifier, which can be in communication with the secure processor and the context manager, can be configured to load a trust vector descriptor upon command from a context manager.

The disclosure is directed to a system and method for establishing a secured wireless connection allowing the exchange of information between a wireless device and aircraft equipment. The secured wireless access system may require a user controlling the wireless device to interact with an onboard interface to initiate a connection. The user may be further required to enter a randomly generated security passcode to pair the mobile device to the aircraft equipment. Further security measures may be implemented, such as tiered user access levels restricting certain equipment and/or information based upon a user identity of the user requesting access.

A dual-cure curable material kit comprising: (A) a radical-polymerizable monomer component; (B) a photopolymerization initiator component comprising (b1) an α-diketone compound, (b2) an aliphatic tertiary amine compound having a tertiary amino group in which three saturated aliphatic groups are bonded to a nitrogen atom and one of the saturated aliphatic groups has an electron-withdrawing group as a substituent, and (b3) an s-triazine compound having a trihalomethyl group as a substituent, or a diaryliodonium salt compound; and a chemical polymerization initiator component (C) comprising (c1) an organic peroxide, and (c2) an N,N-di(hydroxyalkyl)-p-toluidine compound; which is packed separately at least in two packages so that the component (b2) and the component (b3) of the photopolymerization initiator component (B) are not packed together in a single package and the component (c1) and the component (c2) of the chemical polymerization initiator component (C) are not packed together in a single package.

The present invention relates to a polymerization-curable composition for the preparation of biodegradable, biocompatible, cross-linked polymers on the basis of polyvinyl alcohol comprising: 5 to 100% by weight of (a) vinyl ester monomer(s) of one of the general formulas (I) to (III): wherein X is oxygen, sulfur, nitrogen, or phosphorus; n is 1 to 1000, at least 20% of the n being ≧2; the R1 are selected from hydrogen; straight, branched or cyclic, saturated or unsaturated, n-valent hydrocarbon groups having 1 to 30 carbon atoms, which optionally have heteroatoms and are optionally substituted with one or more substituents selected from —OH, —COON, —CN, —CHO, and ═O, and n-valent radicals of biodegradable, biocompatible oligomers and polymers; m is an integer from 1 to 5; the R2 are selected from hydrogen, —OH, ═O, and the options listed for R1; and the R3 are selected from hydrogen, —OH, and the options listed for R1; 0 to 50% by weight of ethylenically unsaturated co-monomers; 0 to 10% by weight of (a) polymerization initiator(s); and 0 to 95% by weight of solvent(s).

The present invention is: a curable resin composition comprising a thermoplastic resin (A), a curable monomer (B), and a photoinitiator (C), the thermoplastic resin (A) including an aromatic ring in its molecule, and having a glass transition temperature (Tg) of 140° C. or more, and the photoinitiator (C) having an absorbance at 380 nm of 0.4 or more when measured in a 0.1 mass % acetonitrile solution; a curable resin formed article obtained by forming the curable resin composition; a cured resin formed article obtained by curing the curable resin formed article; a laminate comprising at least one layer that is formed of a cured resin obtained by curing the curable resin composition. The present invention provides: a cured resin formed article that exhibits excellent heat resistance, includes only a small amount of residual low-boiling-point substance (e.g., solvent and curable monomer), and has small in-plane retardation, a method for producing the same, a curable resin composition and a curable resin formed article that are useful as a raw material for producing the cured resin formed article, and a laminate that includes a layer formed of a cured resin.

A method is disclosed for curing ink printed images on golf balls by printing an image onto a golf ball and exposing the printed image to infrared radiation, then exposing the printed image to ultraviolet radiation.

A system for controlling photovoltaic electricity production equipment having photovoltaic modules each equipped with a DC/DC microconverter connected to a DC bus, a DC bus manager, and an inverter for converting the direct current from the photovoltaic panels into alternative current intended for an electrical distribution network. Power is injected into the DC bus when the voltage of the DC bus is less than a minimum voltage until the minimum voltage is reached. Each of the microconverters injects a maximum power from the photovoltaic modules into the DC bus when the voltage of the DC bus is between a first voltage and a second voltage. The injecting of power from the photovoltaic modules into the DC bus is stopped when the voltage of the DC bus is less than a low threshold voltage or greater than a high threshold voltage.

In some embodiments, an improved mechanical adhesion of copper metallization to dielectric with partially cured epoxy fillers is presented. In this regard, a substrate build-up film is introduced having epoxy material and a plurality of epoxy microspheres, wherein an interior of the microspheres is not fully cured. Other embodiments are also disclosed and claimed.

A machine which provides for both leaf stripping and grading can be used to process plants, such as burley tobacco plants, by continuously moving the plants in a first direction while simultaneously varying the position of the plants in a second direction relative to a defoliating apparatus. The plants may be moved horizontally through a machine by a transporter engaging the plant stalks while the vertical distance between the transporter (and thus the plants) is varied relative to the defoliating apparatus. The transporter and defoliating apparatus may be positioned at an angle to one another. Due to the changing amount of vertical distance, leaves from different sections of the plants, such as leaves at different stalk heights, can be contacted and removed at different corresponding horizontal locations in the machine. Accordingly, leaves can be graded based on the location(s) from which they are retrieved after removal.

The present disclosure provides methods and apparatus for constructing a secure and flexible operating system. The presently disclosed system executes different user applications in different operating systems on different virtual machines. Each user application communicates with other processes via the hypertext transfer protocol (HTTP). In particular, each user application's user interface is implemented in a web browser that is running in its own operating system on its own virtual machine, and each user application interacts with the user interface by exchanging HTTP messages between the virtual machines.

The invention relates to a method for configuring a mobile device capable of reproducing, for a user, multimedia content previously provided by a remote content server. The invention relates to using a client installed on said electronic device to relay authentication requests between a card, preferably complying with the provisions of the Mobile Commerce Extension standard, and an authentication server that is accessible via an access point.

A system that incorporates the subject disclosure may include, for example, instructions which when executed cause a device processor to perform operations comprising sending a service request to a remote management server; receiving from the management server an authentication management function and an encryption key generator for execution by a secure element and an encryption engine for execution by a secure device processor, sending a request to establish a communication session with a remote device; and communicating with the remote device via a channel established using an application server. The secure element and the secure device processor authenticate each other using a mutual authentication keyset. The secure element, the secure device processor and the device processor each have a security level associated therewith; the security level associated with the secure device processor is intermediate between that of the secure element and that of the device processor. Other embodiments are disclosed.

The present invention provides a method and system for secured remote provisioning of a universal integrated circuit card of a user equipment. A system includes a user equipment for initiating a request for remote provisioning of an universal integrated circuit card (UICC) in the user equipment, where the request for remote provisioning includes a machine identifier (MID) associated with the user equipment and a public land mobile network (PLMN) identifier (ID) associated with an network operator. The system also includes at least one shared key management server for dynamically generating security keys and an operator shared key using the security keys, the MID. Moreover, the system includes an operator network for generating a subscription key using the operator shared key and an international mobile subscriber identity (IMSI), and provisioning the IMSI in a secured manner to the UICC of the user equipment using the security keys.