Accessory for a laptop computer with LCD display which is connected to the laptop serial communications port and optically transmits data to a portable information device, such as a wristwatch designed to receive data as sequential pulses of light. The accessory includes a microcomputer with an RC timebase which is calibrated each time it is used by a special internal program, so that the input baud rate to the accessory matches the communications baud rate of the data received from the laptop. The internal program also permits selection of an output baud rate for the optically transmitted data.

An apparatus for measuring a time interval between a start signal edge and a stop signal edge provides a stable clock signal as input to a delay line formed by a series of similar logic gates. The output signal of the last gate of the series is phase locked to the clock signal by adjusting a bias signal controlling the switching speed of all gates. The clock signal and the output signal of each gate form a set of phase distributed periodic timing signals applied to a start time measurement unit (TMU) and a similar stop TMU. The start TMU counts edges of one of the timing signals occurring between an edge of an arming signal and the start signal edge and generates output data representing a time delay between the arming signal and the start signal edge. The data represents the start delay as a whole and fractional number of clock signal periods by conveying the counter output and by indicating which of the timing signals had an edge most closely following the start signal edge. The stop TMU similarly produces output data indicating a whole an fractional number of clock cycles occurring between the arming signal and the stop signal edge. The delay represented by the start TMU output data is subtracted from the delay represented by the stop TMU output data to determine the interval between the start and stop signal edges.

An equatorial sundial apparatus with an adjustable base assembly utilizing one or more concave cylindrical focusing mirrors. One of the benefits that is derived from this apparatus is the use of one or more concave cylindrical mirrors to project a focused beam of light onto a calibrated surface from which the time can be read. This sundial has the additional benefit of not suffering from blurring of the time indicator in a shadow or non-focused beam of light typical of other sundials. This sundial's focused light forms a sharply demarcated indicator from which time can be read to the minute. A further benefit of this apparatus is the ability to incorporate multiple concave cylindrical focusing mirrors to reduce the size of the visual field or screen where the time is read and to incorporate various shapes and designs for ornamental purposes without significant compromise of the sundials accuracy for telling time. An additional benefit of this apparatus is the ability to quickly, accurately and easily adjust the apparatus to the proper tilt upon setup according to the latitude where it will be located by means of an adjustable base assembly.

A memory storage apparatus, a memory controller and method for transmitting and identifying data streams are provided. The memory controller passes at least a portion of a data stream received from a host system to a smart card chip of the memory storage apparatus. Then, the host system accurately receives a response message from the smart card chip by executing a plurality of read commands. The memory controller is capable of adding a first verification code to a response data stream sent to the host system, and is capable of adding a write token to each of data segments of the response data stream. The host system confirms the accuracy of the response data stream by verifying the first verification code or by verifying the write token of each of the data segments.

An optical backup apparatus is provided and includes an optical storage device, an interface module to connect with at least one type of external storage medium, and a control unit to back up data from the external storage medium to the optical storage device in response to an external remote control operation.

Proposed are a management apparatus and a management method capable of improving the stability of the overall computer system. In a computer system which manages a storage area provided by each of a plurality of mutually connected storage apparatuses as a logical pool, provides to a host computer a virtual volume associated with the logical pool, and assigns a real storage area from the logical pool to the virtual volume when the host computer writes into the virtual volume, when a storage apparatus is added to the plurality of storage apparatuses, the host computer is controlled to switch the access path to the added storage apparatus.

Apparatuses and methods for providing data are disclosed. An example apparatus includes a plurality of memories coupled to a data bus. The memories provide data to the data bus responsive, at least in part, to a first address. The plurality of memories further provide at least a portion of the data corresponding to the first address to the data bus during a sense operation for a second address provided to the plurality of memories after the first address. Each of the plurality of memories provides data to the data bus corresponding to the first address at different times. Moreover, a plurality of memories may provide at least 2N bits of data to the data bus responsive, at least in part, to an address, each of the plurality of memories provide N bits of data to the data bus at different times.

In a process for removing aromatic carboxylic acid from a slurry thereof in solvent, the slurry is split into sub streams and each of said sub streams is supplied to a respective rotary pressure filter such that the sub stream pass through the filters in parallel. Gas is passed through the rotary pressure filters in series in an open-loop arrangement.

In an embodiment, an apparatus includes a cryptographic processor within a wireless device. The cryptographic processor includes at least one cryptographic unit. The cryptographic processor also includes a nonvolatile memory to store one or more microcode instructions, wherein at least one of the one or more microcode instructions is related to a sensitive operation. The cryptographic processor also includes a controller to control execution of the one or more microcode instructions by the at least one cryptographic unit, wherein the controller is to preclude execution of the sensitive operation if the apparatus is within an untrusted state.

The disclosure discloses a power management method, for setting a power supply arrangement of an electronic device intelligently, comprising providing at least two sensors, corresponding to at least one threshold respectively; detecting a state of the electronic device for generating a detecting signal respectively; comparing the at least two detecting signals with the at least one threshold corresponding to the at least two sensors respectively; generating at least two situation signals when the at least two detecting signals meet the at least one threshold corresponding to the at least two sensors respectively; looking up a look-up table according to the at least two detecting signals for generating a control command; and writing in at least one independent bit of a register according to the control command for changing or maintaining a power supply arrangement of at least one peripheral component.

A method and apparatus for power-efficiency management in a virtualized cluster system. The virtualized cluster system includes a front-end physical host and at least one back-end physical host, and each of the at least one back-end physical host comprises at least one virtual machine and a virtual machine manager. Flow characteristics of the virtualized cluster system are detected at a regular time cycle, then a power-efficiency management policy is generated for each of the at least one back-end physical host based on the detected flow characteristics, and finally the power-efficiency management policies are performed. The method can detect the real-time flow characteristics of the virtualized cluster system and make the power-efficiency management policies thereupon to control the power consumption of the system and perform admission control on the whole flow, thereby realizing optimal power saving while meeting the quality of service requirements.

Methods and apparatuses to manage working states of a data processing system. At least one embodiment of the present invention includes a data processing system with one or more sensors (e.g., physical sensors such as tachometer and thermistors, and logical sensors such as CPU load) for fine grain control of one or more components (e.g., processor, fan, hard drive, optical drive) of the system for working conditions that balance various goals (e.g., user preferences, performance, power consumption, thermal constraints, acoustic noise). In one example, the clock frequency and core voltage for a processor are actively managed to balance performance and power consumption (heat generation) without a significant latency. In one example, the speed of a cooling fan is actively managed to balance cooling effort and noise (and/or power consumption).

An image forming apparatus is connected to a host device including first and second power domains which are separately supplied with power and includes first and second memories to be disposed in the second power domain, a main controller disposed in the first power domain and to perform a control operation using the first memory in a normal mode, and a sub-controller disposed in the second power domain and perform a control operation using the second memory in a power-saving mode, where when the normal mode is changed to the power-saving mode a power supply to the first power domain is shut off, the first memory operates in a self-refresh mode, and the main controller copies central processing unit (CPU) context information into a context storage unit, and when the power-saving mode is changed to the normal mode, the main controller is booted using the CPU context information stored in the context storage unit.

Arrangements for restarting data transmission on a serial low-power inter-chip media bus (SLIMbus) are presented. A clock signal may be provided in an active mode to a component communicatively coupled with the SLIMbus. Immediately prior to the clock signal in the active mode being provided, the clock signal may have been in a paused mode. While the clock signal was in the paused mode at least until the clock signal is provided in the active mode, the data line may have been inactive (e.g., a toggle on the data line may not have been present). Frame synchronization data for a frame may be transmitted. The frame synchronization data for the frame, as received by the component, may not match expected frame synchronization data. Payload data may be transmitted as part of the frame to the component, wherein the payload data is expected to be read properly by the component.

A method of accessing a communication system and a communication device for performing the same are disclosed. The method includes transmitting, by a communication device to a node of a communication system through a communication link between the communication device and the node, a request to negotiate basic capabilities for communicating with the node, receiving, by the communication device from the node, a response to the request to negotiate basic capabilities, and, transmitting, by the communication device to the node, a request to disconnect the communication link, when the response to the request to negotiate basic capabilities indicates that the node does not support authentication.

Various embodiments described herein relate to apparatus for executing software in a secure computing environment. A secure processor can be used and configured to request a context swap from a first context to a second context when switching execution from a first portion of software to a second portion of software. A context manager, which can be in communication with the secure processor, can be configured to receive and initiate a requested context swap. A trust vector verifier, which can be in communication with the secure processor and the context manager, can be configured to load a trust vector descriptor upon command from a context manager.

There is provided a power management apparatus including: a managed appliance registering unit carrying out authentication on an electronic appliance connected to a power network and registering an electronic appliance for which the authentication has succeeded as a managed appliance, a control unit controlling operation of the managed appliance and supplying of power to the managed appliance, a managed appliance information acquiring unit acquiring, from the managed appliance, as managed appliance information, at least any of appliance information including identification information that is unique to the electronic appliance, information indicating an operation state of the electronic appliance, information indicating an usage state of the electronic appliance and power information of the electronic appliance, and an appliance state judging unit judging a state of the managed appliance based on the managed appliance information acquired by the managed appliance information acquiring unit.

A magnetic resonance imaging apparatus includes an acoustic control unit and an image data acquisition unit. The acoustic control unit applies a gradient magnetic field for controlling a sound in synchronization with a signal representing a respiratory body motion. The image data acquisition unit acquires imaging data by subsequently imaging to control the sound and generate image data based on the imaging data.

An apparatus and method for determining a signal quality of an input signal representing a repetitious phenomena derived from at least one sensor connected to a patient is provided. A detector receives the input signal and determines data representing the repetitious phenomena from the input signal for use in determining at least one patient parameter. A measurement processor is electrically coupled to the detector that determines a first signal quality value by identifying at least one feature of the repetitious phenomena data and compares the at least one feature of a first set of the determined repetitious phenomena data with a second set of the determined repetitious phenomena data to determine a feature variability value and using the feature variability value to determine a stability value representative of the quality of the input signal.

A method and system for treating brain disorders comprises detecting activity of a first target area of the brain via a first implanted sensor and determining the presence of target brain activity by analyzing the detected brain activity in combination with treating the user based upon the determined presence of target brain activity by supplying a first therapeutic agent to the first target area via a first implanted fluid delivery member including at least one distal opening adjacent to the first target area. In addition, the system may be used as well for testing the effectiveness of drugs.

A device and method for accurately characterizing tissue impedance employs multiple electrodes at a plurality of separation distances to cancel the effects of front end loading leakage currents and electrode polarization to improve the accuracy of sensitive impedance measurements used to identify cancerous tissues. These measurements may be automated over a range of frequencies.

An apparatus and method for indicating locus of an ultrasonic probe configured to transmit and receive ultrasonic waves toward a part of a subject wherein a position or movement of the ultrasonic probe is detected, and a locus of the ultrasonic probe on an image of the part of the subject is indicated according to the detected position or movement.

Apparatus and methods are described including acquiring a first set of extraluminal images of a lumen, using an extraluminal imaging device. At least one of the first set of images is designated as a roadmap image. While an endoluminal device is being moved through the lumen, a second set of extraluminal images is acquired. A plurality of features that are visible within images belonging to the second set of extraluminal images are identified. In response to the identified features in the images belonging to the second set of extraluminal images, a plurality of local calibration factors associated with respective portions of the roadmap image are determined. Other applications are also described.

Apparatus and methods are provided for forming and processing multiphasic systems. In one embodiment, the invention provides a process for the manufacture of an epoxide, including reacting an olefinically unsaturated compound with an oxidant in the presence of a buffer component and a water-soluble manganese complex disposed in an aqueous phase having a first pH level in a first multiphasic system, adjusting the pH of the aqueous phase to a second pH level less than the first pH level, isolating at least a portion of the aqueous phase from the first multiphasic system, adjusting the pH of the at least a portion of the aqueous phase to a third pH level greater than the second pH level, and introducing the at least a portion of the aqueous phase into a second multiphasic system.

Provided is a method of producing an organic transistor, including collectively forming a gate insulating film and an organic semiconductor film by applying, onto a gate electrode, a solution including a polymer and at least one of compounds represented by General Formulas 1 to 4 and 5 to 7, a compound having a structure represented by General Formula 4, a compound having a structure represented by General Formula 5 or 6, and forming a source electrode and a drain electrode on the organic semiconductor film. (where R is a linear or branched alkyl group) (where R is an alkyl group) (where R is an alkyl group) (where A1 and A2 are represented by Formula 8) (where R is an alkyl group or another substituent).

The abnormality determination apparatus, which is for determining presence of an abnormality in an angle detection device configured to output an output signal having a value equivalent to a rotational angle of a rotating body, includes a smoothing device configured to receive the output signal of the angle detection device to smooth a dependent variable of a function whose independent variable is the rotational angle equivalent value, and a parameter calculation device for calculating an abnormality determination parameter based on the dependent variable smoothed by the smoothing device. The function is such that an integrated value of the rotational angle equivalent value over a predetermined time section is always positive or negative, and is configured to vary the dependent variable continuously in accordance with continuous variation of the independent variable in at least a part of the predetermined time section.

A subject information acquisition apparatus includes a first holding member that holds a subject, a probe that receives an elastic wave from the subject through the first holding member, a first holding member deformation amount measuring unit that measures an amount of deformation of the first holding member, and a processing unit that creates an area for generating subject information by using the amount of deformation of the first holding member and position information of the first holding member deformation amount measuring unit and generates an information value of subject information corresponding to the area for generating subject information by using a signal outputted by the probe.

When discharge power calculated based on a current value detected by a current detector is smaller than expected maximum power, which is the maximum power expected in an actual operation, a discharge efficiency at the expected maximum power is set as a discharge efficiency used for remaining capacity calculation. This ensures that a remaining capacity based on power required for a photographing operation can be detected.

An absolute position measurement apparatus measures an absolute position of an object to be measured using a first light source and a second light source which has coherency lower than that of the first light source. The absolute position measurement apparatus includes a measurement part which measures a point where phases of interference signals from the first and the second light sources coincide with each other or a point where an intensity of the interference signal from the second light source is maximized, an origin defining part which defines the point measured by the measurement part as an origin position, a phase storing part which stores the phase of the interference signal from the first light source at the origin position, an origin redefining part which redefines the origin position, and a position calculating part which calculates the absolute position of the object to be measured.

A calibration system may be provided for calibrating displays in electronic devices during manufacturing. The calibration system may include calibration computing equipment and a test chamber having a light sensor. The calibration computing equipment may be configured to operate the light sensor and the display to gather display performance data. The calibration computing equipment may extract display performance statistics from the display performance data and adaptively select and perform display calibration sequences using the display performance statistics. The calibration computing equipment may be configured to determine whether or not to perform display calibration and whether or not to gather additional display performance data based on display performance statistics extracted during a preceding display calibration sequence. The calibration computing equipment may be configured to iteratively and adaptively perform display calibration sequences until a display is successfully calibrated.

An apparatus that allows for separating and collecting a fraction of a sample. The apparatus, when used with a centrifuge, allows for the creation of at least three fractions in the apparatus. It also provides for a new method of extracting the buffy coat phase from a whole blood sample and mesenchymal stem cells from bone reaming material. A buoy system that may include a first buoy portion and a second buoy member operably interconnected may be used to form at least three fractions from a sample during a substantially single centrifugation process. Therefore, the separation of various fractions may be substantially quick and efficient.

An apparatus for filtering a material from a medium includes a first housing having a wall with a plurality of openings formed therein, a conveyor disposed in the housing for moving the material therealong, and a conduit line communicating with the interior of the housing for supplying the medium to the apparatus. At least one of the first housing and the conveyor rotate relative to a central axis to direct the medium toward the wall so as to separate the material from the medium. A method for filtering a material from a medium includes supplying the medium to a first housing, spinning the medium within the housing, passing the medium through a wall of the housing to separate the material from the medium, moving the material along the housing, introducing a fluid into the material within the housing, and washing the material using the fluid.

A method for controlling a centrifuge blood component separation system for separating components of a blood product, the separation system comprising a centrifuge and a separation bag and at least one transfer bag. The method comprises selecting a nominal hematocrit value such that an actual hematocrit value is expected to be less than said nominal hematocrit; centrifuging a separation bag containing a volume of composite liquid so as to cause the sedimentation of at least a first component and a second component; transferring some of the first component to a first transfer bag; detecting time of passage of a red blood cell interface at a pre-selected location in the separation bag; and adjusting a predicted processing time based on the time of passage of the red blood cell interface.

A gripper unit for handling a vessel for receiving biological material is proposed, inter alia. The vessel has a lid which can assume an open position and a closed position. The gripper unit comprises a gripper for gripping and releasing the vessel, and a lid holder, for holding a lid in a defined position in relation to the vessel. The defined position is an open position of the lid.

A platelet collection device comprising a centrifugal spin-separator container with a cavity having a longitudinal inner surface. A float in the cavity has a base, a platelet collection surface above the base, an outer surface. The float density is below the density of erythrocytes and above the density of plasma. The platelet collection surface has a position on the float which places it below the level of platelets when the float is suspended in separated blood. During centrifugation, a layer of platelets or buffy coat collects closely adjacent the platelet collection surface. Movement of a float having a density greater than whole blood through the sedimenting erythrocytes releases entrapped platelets, increasing the platelet yield.

The invention is a method of processing tarry or resinous liquids. Tarry liquids include wet scrubber liquids containing tars and chars derived from gasification, pyrolysis or drying of biomass. Resinous liquids include those derived from processing coniferous biomass. Tarry or resinous liquid is processed by a horizontal axis centrifuge having a discharge chamber containing a scraper to prevent centrifuge clogging or fouling. The removed tar and char can be used as solid fuel or recycled to the gasification or pyrolysis process. Polymers, for instance cationic polymers, can be added to the tarry or resin containing liquid prior to centrifugation to assist in solids/liquids separation. Removed resin can be recycled for further use. Tar, char or resin depleted wet scrubber liquid can be recycled for further use or more easily treated prior to disposal.

Embodiments of the present invention generally relate to methods and apparatus for centrifugal separation. In one embodiment, a separator includes an outer tubular having ends sealed from the environment and an inner tubular. The inner tubular is disposed within the outer tubular, has ends in fluid communication with a bore of the outer tubular, and is attached to the outer tubular. The separator further includes an inlet. The inlet is disposed through a wall of the outer tubular, in fluid communication with a bore of the inner tubular, and tangentially attached to the inner tubular so that fluid flow from the inlet to the inner tubular is centrifugally accelerated. The separator further includes a gas outlet in fluid communication with the outer tubular bore; and a liquid outlet in fluid communication with the outer tubular bore.

An apparatus for use with a centrifugal cellular separation device that comprises a rotor rotatable about an axis of rotation is provided that comprises a fluid separation chamber having a first port, a second port spaced apart from the first port, and a third port located intermediate the first port and the second port. The fluid separation chamber has a cross sectional area generally transverse to a radius extending from the axis of rotation that varies between the first port and the second port. The fluid separation chamber is adapted to be mounted to the rotor so as to be rotatable therewith, with the first port located at a greater radial distance from the axis than the second port, and the third port located radially intermediate the first port and the second port.

To provide an image processing method including at least one of recording an image onto a thermoreversible recording medium in which transparency or color tone reversibly changes depending upon temperature, by applying a laser beam with the use of a CO2 laser device so as to heat the thermoreversible recording medium, and erasing an image recorded on the thermoreversible recording medium, by heating the thermoreversible recording medium, wherein an intensity distribution of the laser beam applied in the image recording step satisfies the relationship represented by Expression 1 shown below, 1.59

A process for treating offshore natural gas includes processing the natural gas on an off-shore processing facility by, (i) liquefying and fractionating the natural gas to generate a liquefied natural gas stream and a higher hydrocarbon stream, (ii) vaporizing at least a portion of the higher hydrocarbon stream, (iii) passing the vaporized higher hydrocarbon stream and steam over a steam reforming catalyst to generate a reformed gas mixture comprising methane, steam, carbon oxides and hydrogen, (iv) passing the reformed gas mixture over a methanation catalyst to generate a methane rich gas, and (v) combining the methane-rich gas with the natural gas prior to the liquefaction step.

There is provided a method for upgrading hydrocarbon compounds, in which hydrocarbon compounds synthesized in a Fisher-Tropsch synthesis reaction are fractionally distillated, and the fractionally distillated hydrocarbon compounds are hydrotreated to produce liquid fuel products. The method includes fractionally distilling heavy hydrocarbon compounds synthesized in the Fisher-Tropsch synthesis reaction as a liquid into a first middle distillate and a wax fraction, and fractionally distilling light hydrocarbon compounds synthesized in the Fisher-Tropsch synthesis reaction as a gas into a second middle distillate and a light gas fraction.

In a synthesis gas methanation process, at least one first fraction of synthesis gas to treat is fed, together with steam, to a shift reactor where a shift reaction occurs; the gas flow produced in the shift reactor is then fed to a first methanation reactor where a methanation reaction occurs and then to further second methanation reactors in series, where further methanation reactions, performed with the addition of fresh synthesis gas which has not been subjected to the shift reaction.

A system and process for removing catalyst fines from a gas stream overhead the slurry in a Fischer-Tropsch slurry bubble column reactor. The gas phase at the top of the slurry bubble column reactor containing small amounts of entrained liquid and catalyst particles. The unreacted gases are passed through a demister, which removes larger droplets and catalyst particles. Smaller droplets and catalyst fines are conveyed to a secondary gas cleaner, such as a cyclone, whereby substantially all remaining particles are removed from the gas phase. A particle-containing liquid produced in the secondary gas cleaner can be further subjected to a filtrate cleaning unit to filter out fine catalyst particles and produce a substantially particle-free liquid product stream and a slurry stream of liquid product containing catalyst particles.

Methods and systems are provided for executing a simulation of an operation in a data processing system. In one implementation, the method includes executing an operation under a first set of conditions, determining a characteristic associated with the execution of the operation under the first set of conditions, and executing a simulation of the operation under a second set of conditions different from the first set of conditions. The simulation of the operation is constrained by the determined characteristic. The method can further include determining a cost/benefit of executing the operation under a set of conditions different from the first set of conditions based at least in part on the simulation.

According to one aspect, an apparatus for computing a solution to a power flow problem for an electrical power system comprising a plurality of buses. The apparatus includes (a) at least one processor comprising a plurality of cores; and (b) memory coupled to the at least one processor for storing an admittance matrix for the power system, real power and reactive power for each bus, and an initial complex voltage for each bus; (c) wherein the at least one processor is configured to: (i) perform a Jacobi power flow calculation for each bus to determine the complex voltage for each bus, the Jacobi power flow calculation using the admittance matrix, the real power and reactive power for each bus, and the initial complex voltage for each bus as inputs, wherein at least two Jacobi power flow calculations are performed concurrently on the plurality of cores; (ii) calculate a power mismatch at each bus based on the complex voltages; and (iii) determine whether the Jacobi power flow calculations have converged based on the power mismatch and repeat (i) to (iii) if the Jacobi power flow calculations have not converged.

An ink set includes a first ink composition, and a second ink composition, in which the first ink composition contains a first pigment, and an alkyl diol having carbon atoms of 6 or less and a normal boiling point of 240° C. or more, the second ink composition contains a second pigment, and the alkyl diol, in the first ink composition, a content of the first pigment is 2.5% by weight or more, and a content of the alkyl diol is 3% by weight to 15% by weight, in the second ink composition, a content of the second pigment is less than 2.5% by weight, and the content of the alkyl diol is 8% by weight to 30% by weight, and the content of the alkyl diol in the second ink composition is greater than the content of the alkyl diol in the first ink composition.

A method of applying particles to a backing having a make layer on one of the backing's opposed major surfaces. The method including the steps of: supporting the particles on a feeding member having a feeding surface such that the particles settle into one or more layers on the feeding surface; the feeding surface and the backing being arranged in a non-parallel manner; and translating the particles from the feeding surface to the backing and attaching the particles to the make layer by an electrostatic force.

A thin-film manufacturing method includes the steps of: generating a plasma from source gas; extracting ions from the plasma; and depositing a thin film on one side or both sides of a substrate to be deposited with the ions. The method is performed in an apparatus including: a plasma chamber generating the plasma; a film deposition chamber accommodating the substrate to be deposited; an ion transfer path for transferring the ions from the plasma chamber to the film deposition chamber; a branch pipe branching from the ion transfer path; and an exhaust system connected to the branch pipe. The thin film is formed while the source gas except the ions is exhausted from the branch pipe.

The invention relates to the application of a coating to a substrate in which the coating includes a polymer material and the coating is selectively fluorinated and/or cured to improve the liquid repellance of the same. The invention also provides for the selective fluorination and/or curing of selected areas of the coating thus, when completed, providing a coating which has regions of improved liquid repellance with respect to the remaining regions and which remaining regions may be utilized as liquid collection areas.

The portable, wearable, proximal Alzheimer's disease treatment invention is based upon creating an RF field of particular frequencies and intensities that are applied to the patient's head. To accomplish the aforementioned disease treatment functionality, a system was invented comprising a network of antennas connected to an RF generator via a feedline connector. The invention also provides methods for using measurements to monitor and manage the effectiveness of an ongoing disease treatment regimen, and databases which contain information about measurements, variables, and their relationships to clinical outcome.