If you hate having your SIM locked to your carrier, then we’ll show you how to SIM unlock your iPhone 16 Pro for free!

The post How to SIM unlock the iPhone 16 Pro for FREE! appeared first on Phandroid.

Valve says that customers are limited to one purchase per account.

The post You can Soon Get the Steam Deck OLED in White, but You’d Better Hurry appeared first on Phandroid.

In a unique online romance scam, a man in Tianjin, China, fell victim to a bizarre "marriage bed burning" ritual, costing him Rs 11 lakh.

Atlas Biomed's website is no longer active and the phone number listed is dead as well.

In this clip, Steve Jobs pauses for 18 seconds to contemplate a question deeply before answering.

Kapil Sharma wasted no time in diving into their personal stories, focusing on how Deepinder met his Mexican wife.

Zomato witnesses approximately 400,000 cancelled orders monthly which prompted it to launch the initiative.

A guidance has been issued to the wealthier students with a list of actions they need to follow to create an inclusive environment.

Positioned near the side of her head, the eye provides an expansive field of vision, while a thick layer of protective blubber shields it from harm and maintains warmth.

The video features models dressed in the latest fashion, strutting like mannequins on a moving runway outside the designer store ITIB.

A Bengaluru-based entrepreneur recently took to social media to jokingly explain how his daily commute on bike taxes in the city doubles as an unexpected fitness routine.

The prankster claims that as many as seven schools fell prey to his prank and made the hats.

A man recently took to Reddit, seeking help identifying an unknown Devanagari text he found at a flea market in Germany.

The couple, together for nine years, had announced the wedding date in January and were eagerly looking forward to their long-awaited special day.

The post has sparked a heated debate about Bengaluru's rising rental prices and the need for a cap on deposits.

The offer is valid across the US. Some of its international locations - the chain operates in 40 countries - also have World Kindness Day promotions planned.

The post details a highly restrictive environment where employees are forbidden from basic actions like looking away from their screens or using their phones.

Owlet, a connected-baby care company raised a $24 million Series B investment from Trilogy Equity Partners, with participation from existing investors, including Eclipse Ventures, Broadway Angels, and Enfield Ventures, and the addition Pelion Venture Partners.

Owlet’s core product is a baby sock that contains a smart sensor. The sensor monitors pulse oximetry, a technology used in hospitals to measure an infant's heart rate and blood oxygen levels. The vital signs are communicated to parents’ smartphone via Bluetooth connection. The product retails for $299 and parents can also choose from monthly payment plans.

Other IoT-health startups using sensors to monitor vital signs include Aifloo, a company selling wrist-bands for elders and Air by Propeller, a smart health company that provides an API to predict local asthma conditions.

A complete product package of Owlet monitor includes three fabric socks, smart sock sensor, a base station (which rings an alarm if a baby’s vital signs are abnormal), and charging cords.

Before the company raised the latest round, it closed a $15 million Series B round in late 2016. The recent investment brought Owlet’s total equity funding to $46M. Owlet plans to use the growth capital to launch more baby care products.

Amber Solutions, an IoT product company that sells smart outlets, switches and circuit breakers closed Series A Preferred Stock round of financing that equals $3.3M in gross proceeds. Amber will use the funds to support the commercial development of Amber's core technologies.

One of Amber’s product is solid-state circuit interrupter (GFCI) that basically stops harmful levels of electricity from passing through a person. It operates as a safety device alerting the homeowner of electrocution incidents in real time.

Amber Solutions’ core markets are builders that prepare smart home/smart building ready infrastructure, certified electrical contractors or remodelers, and electrical manufacturers.

Other latest funding news include Owlet’s $24M Series B, Axonize’s $6M Series A round and addition of Deutsche Telekom as its strategic investor, and $30M Series B raised by Palo Alto-based Armis.

Arduino’s MKR family of products got two new wireless connectivity boards added to its range of products. These include MKR WiFi 1010 and MKR NB 1500, both aimed at streamlining IoT product/service development.

Arduino’s blog notes that “the Arduino MKR WiFi 1010 is the new version of the MKR1000 with ESP32 module on board made by U-BLOX.”

MKR WiFi 1010: For prototyping of WI-FI based IoT applications

The core difference of MKR WiFi 1010 compared to MKR WiFi 1000 is that the former can be put to use in production-grade IoT apps and it has ESP32-based module manufactured by u-blox. The former enables to add 2.4GHz WiFi and Bluetooth capability to the application. Additionally, it comes with a programmable dual-processor system (an ARM processor and a dual-core Espressif IC).

MKR NB 1500: For on-field monitoring systems and remote-controlled LTE-enabled modules

The Arduino MKR NB 1500 is based on new low-power NB-IoT (narrowband IoT) standard. This makes it appropriate for IoT apps running over cellular/LTE networks.

Key use cases of this board are remote monitoring systems and remote-controlled LTE-enabled modules. It supports AT&T, T-Mobile USA, Telstra, Verizon over the Cat M1/NB1 deployed bands 2, 3, 4, 5, 8, 12, 13, 20 and 28.

Arduino also pitches this board to be used in IoT apps which used to rely on alternative IoT networks such as LoRa and Sigfox. It promises to save power compared to GSM or 3G cellular-based connections.

Smart Lock Company LockState raised $5.8M Series A in new investment to fund its aggressive sales and marketing and partner development plan. The company previously raised $740K seed round and $1M in a round led by angel investors. The lead investor in latest round was Iron Gate Capital. Other investors include Kozo Keikaku Engineering Inc, Nelnet and Service Provider Capital.

The company’s Wi-Fi-enabled RemoteLock is used by 1000s of Airbnb and other vacation rental hosts. It helps hosts remotely provide access to guests. Locking/unlocking codes can be generated via a host’s computer or smartphone.

RemoteLock’s prices start at $299 which is its algorithmic ResortLock. The most pricey lock by LockState is its ‘RemoteLock 7i Black WiFi Commercial Smart Lock’ which costs $479.

Another core product of LockState is its cloud-based remote access platform for internet-enabled locks. It implies users can remotely manage their (internet-enabled) locks via LockState’s cloud platform.

Unlike smartphones and watches, customers don’t look forward to upgrading their smart locks or buying one when new models are launched. Thus, smart lock companies offset this disadvantage by partnering with property management and short-term rental companies to get new customers.

LockState has partnered with vacation rental brands like Airbnb, HomeAway, and other listing partners to automate guest access.

Igloohome a Singapore-based smart lock company also raised an investment of $4M in April this year.

Report on Corporate Social Responsibility (CSR) in Indian BFSI sector.

[SAPS] Office of the Provincial Commissioner KwaZulu-Natal

[SAPS] - Five suspects are appearing in the Kariega Magistrate's Court today, after they were arrested and found in possession of cycads with an estimated value of R1 Million on Friday 08 November 2024.

[Premium Times] In September, Tyla made headlines at the MTV Video Music Awards (VMAs) for winning the "Best Afrobeats," but she stirred debate by clarifying that she identified with the Amapiano genre rather than Afrobeats

[Afropop] Thandiswa Mazwai has lived the modern history of African music. In the early '90s, when she was still a teenager, she pioneered the emerging kwaito sound in South Africa, first with a trio called Jack-Knife, and then as the lead vocalist and composer for Bongo Maffin. Thandiswa's 2004 debut album as a solo artist, Zabalaza, went double platinum and established her as a major star. Since then, she has delved into jazz, rock, classic African pop styles, and more. Her latest release, Sankofa, is an expansive

[allAfrica]

[The Conversation Africa] Despite the flaws in the latest novel by South African writer Nthikeng Mohlele, there is something alluring about Revolutionaries' House. It is Mohlele's most political novel, and the parallels drawn between love and politics - and their pitfalls - are intriguing.

We live in a rapidly growing “digitalized world,” with an ever-increasing need for video/music streaming, gaming, AI/machine learning, etc. All of these propel demand on modern SoC design to quickly evolve the SoC by fitting more sophisti...(read more)

Today's high-performance computing systems often require the designer to instantiate multiple CPU or DSP cores in their subsystem. However, the performance gained by using multiple CPUs comes with additional programming complexity, especially when accessing shared memory data structures and hardware peripherals. CPU cores need to access shared data in an atomic fashion in a multi-core environment. Locking is the most basic requirement for data sharing. A core takes the lock, accesses the shared data structure, and releases the lock. While one core has the lock, other cores are disallowed from accessing the same data structure. Typically, locking is implemented using an atomic read-modify-write bus transaction on a variable allocated in an uncached memory.

This blog shares the AXI4 locking mechanism when implementing an Xtensa LX-based multi-core system on a Xilinx FPGA platform. It uses a dual-core design mapped to a KC705 platform as an example.

Exclusive Access to Accomplish Locking

The Xtensa AXI4 manager provides atomic access using the AXI4 atomic access mechanism. While Xtensa's AXI manager interface generates an exclusive transaction, the subordinate's interface is also expected to support exclusive access, i.e., AXI monitoring. Xilinx BRAM controller's AXI subordinate interface does not support exclusive access, i.e., AXI monitoring: AXI Feature Adoption in Xilinx FPGAs.

Leveraging Xtensa AXI4 Subordinate Exclusive Access

The Xtensa LX AXI subordinate interface supports exclusive access. One approach is to utilize this support and allocate locks in one of the core's local data memories. Ensure that the number of external exclusive managers is configured, typically to the number of cores (Figure 1).

Figure 1

Note that the Xtensa NX AXI subordinate interface does not support exclusive access. For an Xtensa NX design, shared memory with AXI monitoring is required.

In Figure 2, the AXI_crossbar#2 (block in green) routes core#0's manager AXI access (blue connection) to both core's local memories. Core#1's manager AXI (yellow connection) can also access both core's local memories. Locks can be allocated in either core's local data memory.

In-Bound Access on Subordinate Interface

On inbound access, the Xtensa AXI subordinate interface expects a local memory address, i.e., an external entity needs to present the same address as the core would use to access local memory in its 4GB address space. AXI address remap IP (block in pink) translates the AXI system address to each core's local address. For example, assuming locks are allocated in core#0's local memory, core#1 generates an AXI exclusive to access a lock allocated in core#0's local memory (yellow connection). AXI_crossbar#2 forwards transaction to M03_AXI port (green connection). AXI_address_remap#1 translates the AXI system address to the local memory address before presenting it to core#0's AXI subordinate interface (pink connection).

It is possible to configure cores with disjoint local data memory addresses and avoid the need for an address remap IP block. But then it will be a heterogeneous multi-core design with a multi-image build. An address remap IP is required to keep things simple, i.e., a homogeneous multi-core with a single image build. A single image uses a single memory map. Therefore, both cores must have the same view of a lock, i.e., the lock's AXI bus address must be the same for both.

Figure 2

AXI ID Width

Note Xtensa AXI manager interface ID width=4 bits. Xtensa's AXI subordinate interface ID width=12 bits. So, you must configure AXI crossbar#2 and AXI address remap AXI ID width higher than 4. AXI IDs on a manager port are not globally defined; thus, an AXI crossbar with multiple manager ports will internally prefix the manager port index to the ID and provide this concatenated ID to the subordinate device. On return of the transaction to its manager port of origin, this ID prefix will be used to locate the manager port, and the prefix will be truncated. Therefore, the subordinate port ID is wider in bits than the manager port ID. Figure 3 shows the Xilinx crossbar IP AXI ID width configuration.

Figure 3

Software Tools Support

Cadence tools provide a way to place locks at a specific location. For more details, please refer to Cadence's Linker Support Packages (LSP) Reference Manual for Xtensa SDK. .xtos.lock(green) resides in core#0's local memory and holds user-defined and C library locks. The lock segment memory attribute is defined as shared inner (cyan) so that L32EX and S32EX instructions generate an exclusive transaction on an AXI bus. See Figure 4. The stack and per-core Xtos and C library contexts are allocated in local data memory (yellow).

…………..LSP memory map………….
BEGIN dram0
0x40000000: dataRam : dram0 : 0x8000 : writable ;
dram0_0 : C : 0x40000400 - 0x40007fff : STACK : .dram0.rodata .clib.percpu.data .rtos.percpu.data .dram0.data .clib.percpu.bss .rtos.percpu.bss .dram0.bss;
END dram0
…………………
BEGIN sysViewDataRam0
0xA0100000: system : sysViewDataRam0 : 0x8000 : writable, uncached, shared_inner;
lockRam_0 : C : 0xA0100000 - 0xA01003ff : .xtos.lock;
END sysViewDataRam0
…………..

Figure 4

Please visit the Cadence support site for more information on emulating Xtensa cores on FPGAs.

anyone know what is "cell with Zero maximum clock transition time"  ?

not zero transition, not maximum transtion, it is zero maximum clock transition time.

it means X0 cell? (drive-strength)

can you explain? 

thanks :-)

Hi everyone,

I'm new to using Innovus and I'm encountering an issue while trying to perform the "init_design" command. My goal is to perform the place and route. Here are the commands I'm using:

``
set init_verilog ./test.v
set init_top_cell TEST
set init_pwr_net {VDD VDD_2 VDD_3}
set init_gnd_net {VSS VSSA}
set init_lef_file { /home/laumecha/uw_openroad_free45/pdk/Drexel-ECEC575/Encounter/NangateOpenCellLibrary/Back_End/lef/NangateOpenCellLibrary.lef}
set init_mmmc_file {./viewDefinition.tcl}
init_design
```

However, I receive the following error:

```
#% Begin Load netlist data ... (date=06/04 12:07:50, mem=1478.7M)
*** Begin netlist parsing (mem=1439.0M) ***
Created 0 new cells from 0 timing libraries.
Reading netlist ...
Backslashed names will retain backslash and a trailing blank character.
**ERROR: (IMPVL-209):   In Verilog file './test.v', check line 16 near the text # for the issue: 'syntax error'.  Update the text accordingly.
Type 'man IMPVL-209' for more detail.
Verilog file './test.v' has errors!  See above.

*** Memory Usage v#1 (Current mem = 1439.027M, initial mem = 634.098M) ***
#% End Load netlist data ... (date=06/04 12:07:50, total cpu=0:00:00.0, real=0:00:00.0, peak res=1478.7M, current mem=1478.7M)
**ERROR: (IMPVL-902):   Failed to read netlist ./test.v. See previous error messages for details.  Resolve the issues and reload the design.
```

However, the file works perfectly in Genus.

It seems there is a syntax error in my Verilog file at line 16, but I'm not sure how to resolve it. Any guidance or suggestions would be greatly appreciated.

Thanks in advance!

I am trying to remove the cdn_loop_breaker cells from the netlist. 
When I tried the below 2 things, genus synthesis tool removing the cdn_loop_breaker cells but while connecting the cdn_loop_breaker cell input to its proper connection, its somehow misleading the connections

Things i tried:
1.  remove_cdn_loop_breaker -instances *cdn_loop_breaker*
then i just ran remove_cdn_loop_breaker  comand without the -instances switch
2. remove_cdn_loop_breaker  
     
both of the above things are not providing the proper connections after removing the loop_breaker_cells

can anyone suggest the best possible workaround for this please?

Hi all,

I have been following the tutorial "Innovus Block Implementation with Stylus Common UI", version 23.1.

While I was doing the clock tree synthesis, the tutorial calls for a command

clock_opt_design

But my tool tells me this is a beta feature which needs to be enabled.

Warning: clock_opt_design requires beta feature innovusClockOptFlow enabled.

Can I ask how do I enable this beta feature?

My version of Innovus is v21.35-s114_1, is it because of the version incompatibility?

Many thanks

Hi all,

I'm trying to model the clock of a clock doubler. The doubler consists of a delay cell and an XOR gate, which generates a pulse on both the rising and falling edge of the input clock. I've created a simple module to evaluate this. In this case, DEL1 and XOR2 are standard library cells. There is a don_touch constraint on both library cells as well as on clk_d.

module top (
input wire clk,
output reg Q);

//Doubler
wire clk_d;
wire clk_2x;
DEL1 u_delay (.I(clk),.Z(clk_d));
XOR2 u_xor (.A1(clk),.A2(clk_d),.Z(clk_2x));

//FF for connecting the clock to some leaf:
always @(posedge clk_2x) Q<=~Q;

endmodule

My SDC looks like this:

create_clock [get_ports {clk}] -name clk_i -period 100
set_clock_latency -rise 0.1 [get_pins u_xor/Z]
set_clock_latency -fall 0.4 [get_pins u_xor/Z]
create_generated_clock -name clk_2x -edges {1 1 2 2 3} -source clk [get_pins u_xor/Z]

The generated clock is correctly generated but the pulse width is zero. I would be expecting that the pulse width is the difference between fall and rise latency but is not applied:

report_clocks:

report_clocks -generated:

clk_2x is disconnected from the FF after syn_generic. What can I do to model some minimum pulse width? Will innovus later on model this correctly with the delay of DEL1?

Is there a skill command for "Assign Layout Instance terminals", this form appears when i click on define device correspondence and Bind the devices.

Also,

Problem Statement : i have a schematic with a couple of transistor symbols and and i alos have a corresponding layout view with respective layout transistors but they all are inside a pCell(created by me) i.e layout transistor called inside a custom Pcell. Now i have multiple symbols in schematic view and a single instance(pCell) in layout view. 
Is there a way how i can bind these schematic symbols with layout symbols inside the pCell(custom)? Even if i have to use cph commands i'm fine with it. need help here.

The idea here is to establish XL connectivity between the schematic symbols and corresponding layout transistors(inside the pCell).

Thanks,

Shankar

Hello,

I would like to create a button for my form that prompts the user to click on a cellview and draw a rectangle bounding box, exactly like the one used in the Area and Density Calculator. Can someone please help me with this?

Thanks!

Beto

Hi,

I have a string "[@global_vddi:%:vddi!]" which I need to process to remove "@[]" chars. The desired result is "global_vddi:%:vddi!". I tried the following in CIW

netExpr = "[@global_vddi:%:vddi!]"
rexCompile("\([a-zA-Z0-9_:!%]+\)")
t
rexExecute(netExpr)
t
rexSubstitute( "\0" )
"global_vddi:%:vddi!"

and I achieved the desired value. I added the same code to my script but it didn't work. In my script rexExecute returns 't' but rexSubstitute returns 'nil' 

Here is the snippet from my script

netExpr = dbGetTermNetExpr(term)
if(netExpr then
rexCompile("\([a-zA-Z0-9_:!%]+\)")
rexExecute(netExpr)
netExpr1 = rexSubstitute( "\0" )

...

. ..)  and trace log showing the variable values as the code executes

stopped before evaluating dbGetTermNetExpr(term)
after evaluating dbGetTermNetExpr(term)==> "[@global_vddi:%:vddi!]"
after evaluating (netExpr = dbGetTermNetExpr(term))==> "[@global_vddi:%:vddi!]"
stopped before evaluating if(netExpr then rexCompile("\([a-zA-Z0-9_:!%]+\)") rexExecute(netExpr) (netExpr1 = rexSubstitute("\0")) ... )
stopped before evaluating rexCompile("\([a-zA-Z0-9_:!%]+\)")
after evaluating rexCompile("\([a-zA-Z0-9_:!%]+\)")==> t
stopped before evaluating rexExecute(netExpr)
after evaluating rexExecute(netExpr)==> t
stopped before evaluating (netExpr1 = rexSubstitute("\0"))
stopped before evaluating rexSubstitute("\0")
after evaluating rexSubstitute("\0")==> nil
|[2]netExpr1 set to nil, was nil

Any help or suggestions as to why the code executes differently in CIW and when called from a SKILL script file will be much appreciated.

I also tried a different approach using rexReplace instead of rexSubstitute but couldn't get the regex pattern correct. The code I tried in CIW using rexReplace is as follows

a = "[@global_vddi:%:vddi!]"
"[@global_vddi:%:vddi!]"
rexCompile("\([@\[\]]*\)")
t
rexReplace(a "" 0)
"global_vddi:%:vddi!]"

Only '@[' get replaced and ']' is still present. The regex pattern contains '\]' to match the closing square bracket yet it is not replaced. Please let me know what I'm missing in these 2 scenarios.

Any help is much appreciated!!

Regards,

Confused SKILL user 

Disappearing toolbar or docked menu

Is there a way for the toolbar or floating menu from disappearing when a cells tab is added to a window?

I have created a skill toolbar and it disappeared when I add another cell or tab to a window.

The only toolbars that stay are the ones I have defined in the Layout.toolbar file.

Do I have to add a trigger to keep the toolbars visible or not disappearing from the window?

Cadence version IC23.1-64b.ISR7.27

Paul

Hi,

I want to define a procedure that with @key, and I also want to restrict the variable's datatype, I tried with folloing but I received error in CIW

procedure(tt(handler @key str1 str2 "ssS")
  printf("handler: %L " handler)
)

tt('test)

The error is like: *Error* tt: argument for keyword ?str1 should be a symbol (type template = "ssS") at line 11 of file

Thanks,

James