The most effective way to lower the greenhouse gas (GHG) emissions associated with metal production is to pursue a circular economy for the material in the long term, says a recent study. This century will see a high demand for seven major metals; the resultant overall environmental impact is expected to outweigh any environmental savings that may result from greener production processes or an increased use of renewable energy.

Precious metals, such as gold and silver, constitute a small but valuable part of waste electrical and electronic equipment (WEEE). New research suggests that significant amounts of these precious metals are lost in the initial stage of the waste recovery process and makes recommendations for improvements in the recycling chain.

Spanish medical and public health researchers have found no clear evidence for increased heavy metal levels in adults living near a recently-built urban solid waste incinerator over two years of operation. Concentrations of lead, chromium and mercury in blood and urine samples taken around the plant were not significantly higher than for populations who lived further away.

A new study has investigated the possibility of a regional industrial symbiosis of metal industries across the Sweden-Finland border. The analysis suggests that it is technologically feasible, but that regulatory support may be inefficient, particularly with respect to changing the status of a waste product to a by-product.

Vast resources are required to extract speciality and difficult-to-recycle metals that are often only used once before disposal. Researchers argue in a new analysis that more must be done to improve metal recycling rates in order to secure our material needs for the future.

The challenge of measuring the ‘absence of waste’ makes it particularly difficult to monitor and evaluate waste prevention policies. Researchers have examined the strengths and weaknesses of nine methods of assessing waste prevention, and recommend a hybrid approach, which combines the best of many methods, as particularly valuable.

Life-cycle indicators to monitor selected waste streams' impacts on the environment have been developed by the European Commission’s Joint Research Centre (JRC). These are presented in a recent study which describes a method for analysing waste's impacts using these indicators. The study also reveals the need for better statistics and more detailed categorisation of waste streams to effectively inform decision making in waste management.

Mining metals from landfill sites can be economically viable, a recent project in the US has demonstrated. Approximately 34 352 tonnes of metals, conservatively valued at US$7.42 million (€6.67 million) were recovered from the 8 hectare ashfill site, according to researchers who analysed the project.

The Alang-Sosiya shipbreaking yard in India is highly polluted with heavy metals, a study concludes. The researchers studied heavy metal contamination in sediments taken from the intertidal zone of the shipbreaking yard and compared them to a control site. The area was found to be ‘strongly polluted’ with copper, cobalt, manganese, lead and zinc.

Life cycle assessment (LCA) can measure the environmental impact of the different stages of a ship’s life cycle, from design to dismantling. This assessment focused on the impact of recycling the metal parts of a ship and did not consider the crucial impact of the hazardous materials present on board. The results showed that re-use of metals had environmental benefits, but overall these were small compared to the environmental impact of other life cycle stages, such as operation.

A successful circular economy for valuable metals needs more than just effective recycling technologies, as a new study shows. The research, which explored the governance of recovering vanadium from steel-industry waste, revealed that industry stakeholders feel the prospect of financial gain, or reduced costs, through recovery is too distant at present. This perception could hinder a circular economy for critical materials from industrial residue, the study warns.

Which types of buildings will require the least energy for heating and cooling under climate change? A study in Vienna, Austria, looked at the balance between heating and cooling demand in four different types of buildings. The research provides a method that could be useful for other European cities trying to adapt to climate change.

A three-step chemical process could successfully recover high-purity silicon from recycled photovoltaic (PV) solar panels, new tests show. The scientists behind the research say that recycling not only helps the PV industry meet regulatory requirements, but also reduces pressure on demand for raw materials.

Shortages of indium, a key metal found in thin-film solar cells, could limit their large-scale deployment in the future. A new study has outlined four ways that indium supplies could be increased to meet future demand. For example, indium could be extracted more efficiently from zinc ores, or historic wastes containing indium could be processed to extract the element.

In-depth soil information is increasingly required to achieve an array of environmental and economic goals. In particular, accurate estimates of soil carbon stocks are necessary to guide land-management practices and climate- related policymaking. To help meet this need, Australian scientists have developed a new sensing method to analyse cylindrical soil samples (soil cores), known as the Soil Condition ANalysis System (SCANS). By integrating a novel automated soil- core sensing system (CSS) with advanced statistical analytics and modelling, the SCANS provides a level of detail that is difficult to achieve with existing alternatives. SCANS is not only rapid, accurate and inexpensive1, but is likely to be a useful tool for farmers, land managers and policymakers, as the improved assessment of soil functions, structures and carbon stocks will facilitate more informed, sustainable decision-making.

Indium, a unique metal, is in short supply worldwide and is not recycled at the end of its life (EoL). Indium is used in a wide range of technologies, causing regions across the world that are reliant on its import — such as Europe — to be concerned about security of supply. Primary sources of indium are thought to be sufficient for medium-term needs, but with growing demand comes growing concern over long-term supply. A new study has conducted a material flow analysis and examined secondary sources of indium within European ‘urban mines’ and in-use stocks (IUS) of indium products, identifying these as potential sources of 500 tonnes of indium — if it were recycled at EoL.

Some 'intangible' ecosystem services, such as the aesthetic and cultural value, as well as the recreational use of land, are particularly difficult to price. New research has proposed three explorative methods to value these more intangible services using landscape evaluation, statistics on level of recreational use and the price of real estate in the area.

A new study has proposed a method to place monetary value on green infrastructure at both a project and regional scale, which illustrates the value of investing in green infrastructure to the public and other stakeholders.

There is increasing policy demand for the ‘scaling-up’ of ecosystem service valuations to a national or regional level, but available methods for doing this are limited. A new study has proposed a new scaling-up methodology and tested it by assessing the impact of climate change on European wetlands.

The use of important ecosystem services, such as carbon storage or hunting, can be estimated through ecosystem accounting methods, a new study demonstrates. The researchers tested models that could help policymakers to understand the capacity of ecosystems to generate ecosystem services, and how these services are used over time.

A process to help identify and value cultural ecosystem services has been developed by researchers and is demonstrated in a recent Black Sea case study. This highlighted the value of anchovies to Turkish identity: respondents to a survey said that they would be willing to pay 135 Turkish lira (€49) per year in order to fund environmental management that protects this culturally important species.

As offices start to reopen, Biometric systems could pose a big threat to safety from coronavirus.

In a previous blog post, Notifications from MATLAB, I showed how Amazon's Notification system (AWS SNS) can be used from MATLAB service can be used to easily send information between endpoints in a distributed system, be they applications or people.... read more >>

An innovative reforestation technique has been used successfully to restore patches of forest in an area of Sardinia where traditional reforestation methods have previously failed. It was the first time the technique, known as the Miyawaki method, has been used to restore forests in a Mediterranean region.

Researchers have developed a method to assess the sustainability of regeneration projects that could potentially be administered by a computer. The method tailors the universal goals of sustainability to specific local conditions.

A standardised method to help choose the most cost-effective measures to remediate contaminated sites has been developed by Austrian researchers. The method takes into account a wide range of factors, including the principles of sustainability.

A new five-step method has been developed for assessing the resource efficiency of products and improving the reuse, recycling and recovery of material at a product’s end of life. The Resource Efficiency Assessment of Products (REAPro) method allows the identification and testing of practical measures to improve resource efficiency at both the product and policy level.

The drive to increase renewable energy production can sometimes be at loggerheads with the desire to preserve natural landscapes. In this study, researchers from across Europe assessed the environmental impacts of renewable energies in the Alps, making key recommendations to resolve conflicts between different users of habitats.

Green public procurement (GPP) – authorities considering environmental criteria when allocating contracts to private suppliers – is becoming increasingly popular as an environmental policy instrument. This study analysed data from Swedish cleaning service procurements, finding a ‘weak’ effect on supplier behaviour in this situation. The researchers say that, for GPP to be an effective policy instrument, it is important to consider suppliers’ decisions to participate in procurement and to screen them against mandatory green criteria.

When broken down, ships can release hazardous substances into the environment. This study investigated the environmental impact of shipbreaking in one of Europe’s few ship recycling yards, based in Portugal. The results reveal large differences between assessment methods and show that environmental impact depends on composition rather than size or class.

Policymakers often have to make decisions under great complexity, uncertainty and time pressure. A new study presents a support tool for the first stage of policymaking: identifying and exploring alternatives to solve problems. The software tool, called QUICKScan, increases the speed of this process and combines the input of many stakeholders in participatory workshops. It has been applied 70 times in 20 different countries, for a wide range of environmental policy issues.

The German Renewable Energy Sources Act was introduced in 2001 to encourage an increase in renewable energy supply. Since then, supply has increased from 7% (in 2001) to 37% (in 2017. Wind energy is an important part of Germany’s renewable energy production — but deploying sufficient turbines to achieve the climate goals requires a large amount of raw materials, many of which are metals in limited supply. This study found copper and dysprosium to be the most critical of these metals, as they could face future bottlenecks and are essential elements in present and future turbine design.

The economic viability of wastewater reuse projects could be better determined using methodology from a new study. The authors developed a five-step cost-benefit analysis framework to assess a planned wastewater reuse project within the catchment of the Yarqon River, in Tel Aviv Metropolitan Area, Israel. It was found that the scheme could have a net present value of $4.83 (€4.34) million per year. The authors highlight the relevance of identifying external as well as internal economic, social and environmental costs of such projects.

Agricultural run-off can contain pesticides, sediment particles and nitrates and is a major threat to the health of the sea. Although there are policy frameworks to reduce run-off water, they often don’t clearly explain how to maximise benefits. A new study provides an economic framework that prioritises methods based on their cost-effectiveness, which could help policymakers to reduce the pollution of marine ecosystems.

Droughts can have far-reaching environmental, social and economic impacts. A new study has assessed how drought is managed in six areas of Europe using a new evaluation framework. Their evaluation identified policy gaps and makes recommendations for risk management. A key recommendation is to evaluate responses and management after each drought to identify good practices and strengthen drought management in the future.

Algal blooms in inland and marine waters could be detected and monitored more accurately in future, thanks to a new assessment method. Scientists have developed a new algorithm for sensors which identify emerging blooms of cyanobacteria based on the behaviour of light reflected by the algae’s pigment. Importantly, the algorithm may reduce uncertainty in estimations of algal concentrations by distinguishing between two different types of pigment.

Water-supply planning that considers the preferences of multiple stakeholders under uncertain and variable future conditions are more robust than planning decisions based on historical conditions, a recent study has stated. Using the Thames river basin in the UK as an example, the researchers present a new computer-modelling approach to assess which combinations of water-management measures best secure future water supply under a wide range of possible future conditions.

New research has identified the areas in the Western hemisphere where climate change may have the greatest impacts on amphibians. Alongside traditional methods to predict shifts in geographical ranges, it mapped species with particularly restricted ranges and identified areas most likely to receive less precipitation in the future.

Researchers have developed a new scientific method to estimate the time lag between the introduction of an alien species and its extensive spread. For New Zealand weed species, the study estimated that the average lag was around 20-30 years. Although this may seem to be a long time, seemingly rare but fast-spreading species could become tomorrow's harmful weeds.

High quality landscape assessments of areas protected under the Natura 2000 network are critical for effective long-term management plans. In a recent study, scientists have presented a integrated assessment of a Natura 2000 site in Sicily, Italy, which not only considers preservation of environmental features, as required by Natura 2000, but also human features, such as places of historical interest or industrial activity.

Intensive farming methods have simplified landscapes across Europe, leading to a loss of biodiversity. A recent study has investigated the effects of intensive farming on plants, beetles and birds in Western European regions and found that plants and birds are particularly affected.

A new method for mapping long-term changes in habitat over large areas and in fine detail has been developed, which could help inform conservation plans to restore biodiversity to previous states. In a UK case study, researchers have used it to demonstrate the dramatic effects of intensive agriculture and afforestation on rural habitats since the 1930s.

The first ever European-wide study of bird monitoring practices reveals a wide range of monitoring protocols. The researchers provide recommendations for improving bird monitoring programmes, in particular, for those involving large numbers of volunteers.

Little is known about the organisms that live within soil, although they play a vital role in the biological processes that support life on Earth. In a recent study, researchers calculated the relative risk of pressures caused by human activity on soil biodiversity in the EU, showing that intensive land use has the greatest impact.

Researchers have developed a new method of mapping seafloor habitats, which uses easily measured environmental properties to infer the type and extent of seafloor ecosystems. It could help in the effective implementation of the European Marine Strategy Framework Directive, the researchers suggest.

Monitoring and evaluation of conservation projects is vital to ensuring their success. However, there is currently a lack of clarity about the different methods available and the ways in which they can complement each other. For this study the researchers explore the characteristics of five approaches — ambient monitoring, management assessment, performance measurement, impact evaluation, and systematic review — and examine their strengths and weaknesses.

A new method for identifying forest sites to protect under the Natura 2000 network — as well as reviewing existing sites — is presented in a recent study. The modelling approach predicts the location of certain types of high nature value habitats using existing data on the distribution of key indicator species. The study demonstrates the method using the case of a German federal state, Lower Saxony.

A new approach to modelling the spread of mammal populations under climate change has been developed. The method overcomes the problem of missing ecological data for most species by using information on species characteristics, or ‘traits’, associated with population demographic rates and individual movements to deduce which species move too slowly to escape climate change’s effects on their habitat. The model’s results suggest that around 30% of mammal species may not be able to disperse quickly enough to survive.

Scientists have developed a new way of monitoring Ponto-Caspian gobies, a group of widely invasive fish species, by detecting traces of the fishes’ DNA in river water. They say, in a recent research paper, that it offers a quicker, easier and cheaper way of monitoring the fish than conventional catching or sighting methods.

A method for developing more cost-effective agri-environment schemes is outlined in a recent study. The procedure can be used over large areas, accounts for hundreds of management regimes and several different endangered species. The model is one of the first to account for the timing of measures and, when applied to Saxony in Germany, proposed savings of over €3 million, while also improving some conservation outcomes.