Two spacecraft have detected a possible signal of dark matter, the mysterious, invisible stuff that makes up most of the material universe.

What the Flux? No Sign of Aliens Around Strange, Dimming Star

A mysterious radio signal from deep space appears to be repeating every 16 days.

Many repeating and non-repeating signals have been discovered by the CHIME telescope in Canada.

The magnetic pole is moving faster than at any time in human history, causing major problems for navigation and migratory wildlife.

The broker, now called Somerset Bridge, is set to launch another appeal against the £60,000 data fine.

Once you have become a subscriber to Dish Network, you won't want anything to interrupt the fantastic Satellite TV programming that you will quickly grow accustomed to.

A law to ban smoking in public places could save more lives more quickly than the development of a single new anti-cancer drug - according to the charitable group Cancer Research UK.

Despite numerous unknowns and continued challenges, many agencies and advertisers have shifted gears for the next phase.

Please visit Marketing Land for the full article.

Hypertension is a potentially unsafe health ailment, which can be indicated directly from the Blood pressure (BP). Hypertension always leads to other health complications. Continuous monitoring of BP is very important; however, cuff-based BP measurements are discrete and uncomfortable to the user. To address this need, a cuff-less, continuous and a non-invasive BP measurement system is proposed using Photoplethysmogram (PPG) signal and demographic features using machine learning (ML) algorithms. PPG signals were acquired from 219 subjects, which undergo pre-processing and feature extraction steps. Time, frequency and time-frequency domain features were extracted from the PPG and their derivative signals. Feature selection techniques were used to reduce the computational complexity and to decrease the chance of over-fitting the ML algorithms. The features were then used to train and evaluate ML algorithms. The best regression models were selected for Systolic BP (SBP) and Diastolic BP (DBP) estimation individually. Gaussian Process Regression (GPR) along with ReliefF feature selection algorithm outperforms other algorithms in estimating SBP and DBP with a root-mean-square error (RMSE) of 6.74 and 3.59 respectively. This ML model can be implemented in hardware systems to continuously monitor BP and avoid any critical health conditions due to sudden changes.

In a wireless communication system, a compact control signaling scheme is provided for signaling the selected retransmission mode and codeword identifier for a codeword retransmission when one of a plurality of codewords being transmitted over two codeword pipes to a receiver fails the transmission and when the base station/transmitter switches from a higher order channel rank to a lower order channel rank, either by including one or more additional signaling bits in the control signal to identify the retransmitted codeword, or by re-using existing control signal information in a way that can be recognized by the subscriber station/receiver to identify the retransmitted codeword. With the compact control signal, the receiver is able to determine which codeword is being retransmitted and to determine the corresponding time-frequency resource allocation for the retransmitted codeword.

A method is provided for receiving a signal. The method includes receiving a signal transmitted in a radio frequency (RF) band including at least one RF channel, demodulating the received signal, parsing a preamble of a signal frame including layer-1 information from the demodulated signal, deinterleaving bits of the layer-1 information, decoding the deinterleaved bits using an error correction decoding scheme including a shortening scheme and a puncturing scheme and obtaining physical layer pipes (PLPs) from the signal frame using the error-correction-decoded layer-1 information.

Apparatus comprising an input connected to receive an input signal, a lookup table comprising a plurality of input entries and first and second output entries for each input entry. The look up table receives the input signal and returns a lower input entry, an upper input entry, the second output entry for the lower input entry, and the first output entry for the upper input entry. A first subtractor subtracts the lower input entry from the input signal to produce a first difference. A second subtractor subtracts the input signal from the upper input entry to produce a second difference. First and second multipliers multiply the first and second differences by the first output entry for the upper input entry and the second output entry for the lower input entry, respectively, to produce first and second products. An adder adds the first and second products to produce an output signal.

The disclosure relates to the implementation of multi-tasking on a digital signal processor. Blocking functions are arranged such that they do not make use of a processor's hardware stack. Respective function calls are replaced with a piece of inline assembly code, which instead performs a branch to the correct routine for carrying out said function. If a blocking condition of the blocking function is encountered, a task switch can be done to resume another task. Whilst the hardware stack is not used when a task switch might have to occur, mixed-up contents of the hardware stack among function calls performed by different tasks are avoided.

In an example embodiment, there is described herein an apparatus comprising an interface for communicating with a plurality of digital signal processors and logic operable to send and receive data via the interface. The logic is configured to determine a first set of digital signal processors to be maintained in a ready state, a second set of digital signal processors to be maintained in a first energy saving state, and a third set of digital signal processors to be maintained in a second energy saving state.

There is a provided a method for car navigating using traffic signal data. The method for car navigating is characterized of providing an optimized route for the earliest arrival to destinations by using signal system data of one or more traffic signals existing on a certain route.

Low bit rate audio coding such as BWE algorithm often encounters conflict goal of achieving high time resolution and high frequency resolution at the same time. In order to achieve best possible quality, input signal can be first classified into fast signal and slow signal. This invention focuses on classifying signal into fast signal and slow signal, based on at least one of the following parameters or a combination of the following parameters: spectral sharpness, temporal sharpness, pitch correlation (pitch gain), and/or spectral envelope variation. This classification information can help to choose different BWE algorithms, different coding algorithms, and different postprocessing algorithms respectively for fast signal and slow signal.

An apparatus for processing an audio signal and method thereof are disclosed. The present invention includes receiving a downmix signal and side information; extracting control restriction information from the side information; receiving control information for controlling gain or panning at least one object signal; generating at least one of first multi-channel information and first downmix processing information based on the control information and object information, without using the control restriction information; and, generating an output signal by applying the at least one of the first multichannel information and the first downmix processing information to the downmix signal, wherein the control restriction information relates to a parameter indicating limiting degree of the control information.

An encoder for providing an audio stream on the basis of a transform-domain representation of an input audio signal includes a quantization error calculator configured to determine a multi-band quantization error over a plurality of frequency bands of the input audio signal for which separate band gain information is available. The encoder also includes an audio stream provider for providing the audio stream such that the audio stream includes information describing an audio content of the frequency bands and information describing the multi-band quantization error. A decoder for providing a decoded representation of an audio signal on the basis of an encoded audio stream representing spectral components of frequency bands of the audio signal includes a noise filler for introducing noise into spectral components of a plurality of frequency bands to which separate frequency band gain information is associated on the basis of a common multi-band noise intensity value.

An audio signal decoder has a time warp contour calculator, a time warp contour data rescaler and a warp decoder. The time warp contour calculator is configured to generate time warp contour data repeatedly restarting from a predetermined time warp contour start value, based on time warp contour evolution information describing a temporal evolution of the time warp contour. The time warp contour data rescaler is configured to rescale at least a portion of the time warp contour data such that a discontinuity at a restart is avoided, reduced or eliminated in a rescaled version of the time warp contour. The warp decoder is configured to provide the decoded audio signal representation, based on an encoded audio signal representation and using the rescaled version of the time warp contour.

An apparatus for encoding an audio signal having a stream of audio samples has: a windower for applying a prediction coding analysis window to the stream of audio samples to obtain windowed data for a prediction analysis and for applying a transform coding analysis window to the stream of audio samples to obtain windowed data for a transform analysis, wherein the transform coding analysis window is associated with audio samples within a current frame of audio samples and with audio samples of a predefined portion of a future frame of audio samples being a transform-coding look-ahead portion, wherein the prediction coding analysis window is associated with at least the portion of the audio samples of the current frame and with audio samples of a predefined portion of the future frame being a prediction coding look-ahead portion, wherein the transform coding look-ahead portion and the prediction coding look-ahead portion are identically to each other or are different from each other by less than 20%; and an encoding processor for generating prediction coded data or for generating transform coded data.

A time warp contour calculator for use in an audio signal decoder receives an encoded warp ratio information, derives a sequence of warp ratio values from the encoded warp ratio information, and obtains warp contour node values starting from a time warp contour start value. Ratios between the time warp contour node values and the time warp contour starting value are determined by the warp ratio values. The time warp contour calculator computes a time warp contour node value of a given time warp contour node, on the basis of a product-formation having a ratio between the time warp contour node values of the intermediate time warp contour node and the time warp contour starting value and a ratio between the time warp contour node values of the given time warp contour node and of the intermediate time warp contour node as factors.

An error concealment method and apparatus for an audio signal and a decoding method and apparatus for an audio signal using the error concealment method and apparatus. The error concealment method includes selecting one of an error concealment in a frequency domain and an error concealment in a time domain as an error concealment scheme for a current frame based on a predetermined criteria when an error occurs in the current frame, selecting one of a repetition scheme and an interpolation scheme in the frequency domain as the error concealment scheme for the current frame based on a predetermined criteria when the error concealment in the frequency domain is selected, and concealing the error of the current frame using the selected scheme.

In an apparatus for recording and quickly retrieving video signal parts on a magnetic tape, during recording information about the local position of each video signal part is automatically stored in a memory associated with the apparatus, which is designed for storing identifying information for a large number of magnetic tape cassettes. The retrieval of each video signal part on each of the cassettes can be effected substantially without delay in the quick rewind mode of operation.

The disclosed device enables the recording of television broadcasts which are preprogrammed in a memory. The presence of data lines of the television signal in combination with the presence of a color television signal is checked. When the data lines stop, the video recorder is switched on in real time by a clock time signal.

A method is described for detecting the time messages in the faulty signal of a time-signal transmitter comprising the steps below. Probabilities are assigned to the received information/bits as they are received and whose sign specifies the value of the bit and whose numerical value indicates the certainty of reception. Except for the bits designating the minute information, the probabilities of successive time messages are totaled with time correctness in a one-dimensional memory field. From the totaled probabilities, a reduced time message is reconstructed that initially contains no information on the minutes. If the reconstructed time message does not change over two successive time intervals, and if preset minimum values for the number of probabilities are exceeded for all bits, then the reduced time message is recognized as being correct. The minutes are determined separately and added to the time message recognized as being correct.

An apparatus for measuring a time interval between a start signal edge and a stop signal edge provides a stable clock signal as input to a delay line formed by a series of similar logic gates. The output signal of the last gate of the series is phase locked to the clock signal by adjusting a bias signal controlling the switching speed of all gates. The clock signal and the output signal of each gate form a set of phase distributed periodic timing signals applied to a start time measurement unit (TMU) and a similar stop TMU. The start TMU counts edges of one of the timing signals occurring between an edge of an arming signal and the start signal edge and generates output data representing a time delay between the arming signal and the start signal edge. The data represents the start delay as a whole and fractional number of clock signal periods by conveying the counter output and by indicating which of the timing signals had an edge most closely following the start signal edge. The stop TMU similarly produces output data indicating a whole an fractional number of clock cycles occurring between the arming signal and the stop signal edge. The delay represented by the start TMU output data is subtracted from the delay represented by the stop TMU output data to determine the interval between the start and stop signal edges.

Arrangements for restarting data transmission on a serial low-power inter-chip media bus (SLIMbus) are presented. A clock signal may be provided in an active mode to a component communicatively coupled with the SLIMbus. Immediately prior to the clock signal in the active mode being provided, the clock signal may have been in a paused mode. While the clock signal was in the paused mode at least until the clock signal is provided in the active mode, the data line may have been inactive (e.g., a toggle on the data line may not have been present). Frame synchronization data for a frame may be transmitted. The frame synchronization data for the frame, as received by the component, may not match expected frame synchronization data. Payload data may be transmitted as part of the frame to the component, wherein the payload data is expected to be read properly by the component.

An apparatus and method for determining a signal quality of an input signal representing a repetitious phenomena derived from at least one sensor connected to a patient is provided. A detector receives the input signal and determines data representing the repetitious phenomena from the input signal for use in determining at least one patient parameter. A measurement processor is electrically coupled to the detector that determines a first signal quality value by identifying at least one feature of the repetitious phenomena data and compares the at least one feature of a first set of the determined repetitious phenomena data with a second set of the determined repetitious phenomena data to determine a feature variability value and using the feature variability value to determine a stability value representative of the quality of the input signal.

An information processing method includes the following steps: applying a pattern matching process on the body motion signal information, and extracting rhythm cycle candidate waves which are rhythm cycle candidates related to the rhythmic motion; performing −1 or more times integration on the body motion signal information to obtain a motion trajectory, and performing coarse-graining on the motion trajectory to produce an auxiliary wave; superimposing the rhythm cycle candidate waves which are extracted in the process of extracting the cycle candidate waves, on the obtained auxiliary wave, and selecting a cycle of a rhythm cycle candidate wave which has a peak in the auxiliary wave, as a true cycle; and finally obtaining a result of the processing.

Disclosed are various embodiments involving correction of signals generated by a crystal oscillator. An age of an integrated circuit or a time of use of the integrated circuit may be determined. A signal generated from a crystal of the integrated circuit may be modified based at least in part on the determined age of the integrated circuit or the determined time of use of the integrated circuit.

Devices, systems, and methods for treating a heart of a patient may make use of structures which limit a size of a chamber of the heart, such as by deploying a tensile member to bring a wall of the heart toward (optionally into contact with) a septum of the heart. The implant may include an electrode or other structure for applying pacing signals to one or both ventricles of the heart, for defibrillating the heart, for sensing beating of the heart or the like. A wireless telemetry and control system may allowing the implant to treat congestive heart failure, monitor the results of the treatment, and apply appropriate electrical stimulation.

Methods and devices for cardiac signal analysis in implantable cardiac therapy systems. Several signal processing and/or conditioning methods are shown including R-wave detection embodiments including the use of thresholds related to previous peak amplitudes. Also, some embodiments include sample thresholding to remove extraneous data from sampled signals. Some embodiments include weighting certain samples more heavily than other samples within a sampled cardiac signal for analysis.

It is critical in an inductively link medical implant, such as a visual prosthesis or other neural stimulator, to adjust the external coil to a location to maximize communication between the external coil and internal coil. Converting the signal strength between the coils to a signal easily discernible by a clinician, preferably an audible tone, facilitates the adjustment of the external coil to a preferred location.

A signal conditioner for use with a controller and a burner receives an input signal from the controller. A conversion circuit generates a primary output signal corresponding to the input signal to control the burner. The signal conditioner also includes a delay circuit. The delay circuit overrides the primary output signal generated by the conversion circuit and substitutes a delay signal to the burner at a predetermined level for a predetermined time. The signal conditioner may also include a temperature override circuit, which receives a temperature of air from the burner. If the temperature is above or below established limits, the temperature override circuit substitutes a temperature override signal to the burner.

A signal processing apparatus executes a plurality of microprograms stored in a microprogram memory device in a time-sharing manner, so as to perform arithmetic operations on a digital signal entered by a signal input device. A delay memory device that delays the digital signal. The delay memory device has a plurality of delay areas that are independently provided for the respective microprograms, such that each of the microprograms that is being executed uses a corresponding one of the plurality of delay areas so as to delay the digital signal, and a common area that can be accessed by all of the microprograms. As a result, data such as tables for use in common by the plurality of microprograms can be stored, and the stored data can be easily used by each microprogram, without making the system complicated or increasing the cost of the apparatus.

Methods and apparatus related to the detection of low-rate visible light communication (VLC) signals and the recovery of information communicated by the VLC signals are described. Various methods and apparatus are well suited for embodiments in which a device, e.g., a smartphone, including a camera which uses a rolling shutter. The rolling shutter facilitates the collection of different time snapshots of a received low rate time varying VLC signal with different pixel rows in the image sensor of a frame corresponding to different time snapshots. In some embodiments, demodulation is used to recover and identify a single tone being communicated in a frame from among a plurality of possible alternative tones that may be communicated, each different tone corresponding to a different set of information bits.

A signal transmission device drives a light-emitting element and outputs an optical signal depending on a data signal from an electronic device. The device includes an element driving portion which supplies a driving current to the light-emitting element, wherein the driving current is obtained by superimposing a modulation current on a bias current, the modulation current being dependent on the data signal indicating emitting information of the light-emitting element. A temperature compensation portion of the device controls the bias current and the modulation current depending on the temperature so that a temperature-current characteristic of the light-emitting element is reproduced based on the voltage which is dependent on the temperature and the voltage which is independent from the temperature, thereby performing current control depending on the temperature.

This invention concerns real-time multi-impairment signal performance monitoring. In particular it concerns an optical device, for instance a monolithic integrated photonics chip, comprising a waveguide having an input region to receive a signal for characterization, and a narrow band CW laser signal. A non-linear waveguide region to mix the two received signals. More than one output region, each equipped with bandpass filters that extract respective discrete frequency bands of the RF spectrum of the mixed signals. And, also comprising (slow) power detectors to output the extracted discrete frequency banded signals.

A WDM optical signal is transmitted through a tunable optical filter and is polarization-nulled to find optical signal to noise ratio of individual WDM channels. The polarization nulling can be performed using a heuristic multipoint extrema search method, such as Nelder-Mead method. A plurality of checkpoints can be included in the search to verify the progress and to improve the overall robustness of a real-time polarization nulling.

An optical transport network system includes a plurality of NEs, each transmitting wavelength-multiplexed optical signals. Each NE includes a routing information DB that is used to store reachable area information, which contains identifiers of other NEs in a range within which the optical signals can be transmitted from the own NE without using an REG. A FROM NE includes a path candidate searching unit that searches for a plurality of path candidates for transmitting optical signals from the FROM NE to a TO NE. The TO NE includes a path selecting unit that selects a path for transmitting optical signals from among a plurality of path candidates. The path selecting unit obtains the number of times for which the REG is used for each of the plurality of path candidates; and, based on each number of times that is obtained, selects a path for transmitting the optical signals.

A method for adjusting an optical signal includes determining a polarization dependent loss (PDL) value associated with the optical signal, determining an angle between the optical signal and one or more axes of PDL, determining an amount of nonlinear phase noise due to PDL and nonlinear effects upon the optical signal based upon the PDL value and the angle, determining a phase rotation based upon the amount of nonlinear phase noise, and applying the phase rotation to the optical signal.

An optical receiver circuit is disclosed in which a number of electrical signals are processed to extract data encoded therein. The electrical signals may be compared during the process to selectively remove one or more waveforms from one or more corresponding electrical signals. Various data signals, each including one or more waveforms, may then be processed to extract the encoded data. The optical receiver circuit reduces, or eliminates, electrical offsets which may be present in one or more of the electrical signals to reduce corresponding errors in the encoded data signals.

The present invention provides molecular biosensors capable of signal amplification, and methods of using the molecular biosensors to detect the presence of a target molecule.

The present invention is applied to a frequency converter used for a receiver. The frequency converter according to the present invention includes an LO signal generator (11) that generates an LO signal and outputs the LO signal; and a mixer (10) that multiplies a received signal that has been band-limited to a usable bandwidth of said receiver by the LO signal so as to convert the frequency of the received signal and outputs the resultant signal. Said LO signal generator is capable of varying a phase resolution.

A voltage regulator coupled to an unregulated DC input voltage source by an input terminal, and to a load by an output terminal is disclosed. The voltage regulator converts an input voltage at the input terminal to an output voltage at the output terminal. The voltage regulator includes one or more slaves, and each slave includes a switching circuit which serves as a power switch for alternately coupling and decoupling the input terminal to an intermediate node. The voltage regulator also includes a filter coupled to the slaves, the filter including one or more inductor banks each of which having a predetermined number of inductors.

A servo processor for an optical disk drive is provided that includes: an analog-to-digital converter for converting versions of photodetector output signals into digital signals; and a digital signal processor configured to receive the digital signals, the digital signal processor being further configured to determine a focus error signal (FES) and a tracking error signal (TES) from the digital signals, the digital signal processor being further configured to process TES and FES through servo algorithms to produce tracking and focus control signals.

A device is described for generating a control signal for controlling a passenger protection arrangement of a motor vehicle, having a first acceleration sensor for generating a first acceleration signal, having a second acceleration sensor for generating a second acceleration signal, having a first structure-borne noise sensor for generating a first structure-borne noise signal, having a second structure-borne noise sensor for generating a second structure-borne noise signal, and having an evaluation circuit, the evaluation circuit (being configured for generating a combination signal from the first structure-borne noise signal and the second structure-borne noise signal, the evaluation circuit being configured for generating the control signal as a function of the first acceleration signal, the second acceleration signal and the combination signal.

Beamformer coefficients may include a plurality of sets of theoretical statistical data for theoretical signals. Each theoretical signal may have its own particular attributes. The statistical data may be used in computing beamformer coefficients for application by a beamformer to signals received at a device. Signals are received at an input of the device. A respective plurality of weights is determined, for the theoretical statistical data sets, based on an analysis of the extent to which the signals have the particular attributes of the theoretical signals. The theoretical are retrieved, and a statistical data set is calculated for the signals by performing a weighted sum of the theoretical statistical data sets using the determined respective plurality of weights. Beamformer coefficients are computed based on the calculated statistical data set for the signals, which are used by a beamformer to the signals for generating a beamformer output.

Audio signals are processed for use in a communication event. A data store may be queried to obtain an indication of an echo direction, which relates to a direction from which audio signals output from the audio output are likely to be received at a microphone array (plurality of microphones) of a device. Beamformer coefficients of an adaptive beamformer of the device are determined in dependence upon the received indication of the echo direction. Audio signals are received at the microphone array. The adaptive beamformer applies the determined beamformer coefficients to the received audio signals, thereby generating a beamformer output for use in the communication event. The beamformer coefficients are determined such that echo suppression is applied to audio signals received at the microphone array from the indicated echo direction.