At Redland's Bicycle Classic

Precision Medicine Nonprofit in Position to Become Early Contributor to Cancer Moonshot Initiative

Ondesoft Software offers giveaway of Ondesoft Audio Recorder and a 50% discount on iTunes DRM Audio/Video Converter for both Mac and Windows during 2017 Halloween season.

Clifford Beaumont - UK mortgage approvals increase while business investment remains unchanged.

This is not about making a value judgment. Whether the decision is good or bad can only be known at the end of the 10th season of the IPL.

While his approval rating among Democrats is above 60 percent, the poll shows Gov. Larry Hogan draws less than 50 percent of the vote, in head-to-head matchups with leading Democratic candidates.

Tree removal and trimming will occur adjacent to the Bright Angel Trail near the Indian Garden day-use area Monday, September 28 through Wednesday, September 30. https://www.nps.gov/grca/learn/news/indian-garden-tree-trimming.htm

In recent decades, dam removal has emerged as a viable national and international strategy for river restoration.

We evaluated the effects of vegetation control and organic matter (OM) removal on soil water content (SWC) in a Douglas-fir (Pseudotsuga menziesii (Mirb.) Franco) plantation from age 3 through age 5. Treatments were presence versus absence of vegetation control through year 5 and bole-only harvest of the previous stand versus total-tree harvest of the previous stand including removal of all coarse woody residues.

Research Highlights: Mechanical clot removal alone may be as effective as combining it with intravenous (IV) clot-busting medications for stroke patients.    Mechanical clot removal alone reduced the risk of brain bleeding in this Japanese...

Among all of the design agencies’ headaches, artwork proofing is probably one of the most acute ones. Forwarding countless numbers of requests, following up your approvers with reminders that they have a file to check, searching for their feedback in the endless pile of emails or messages… Quite daunting, to say the least, and quite […]

The aim of this paper is to obtain a generalized CK-extension theorem in superspace for the bi-axial Dirac operator. In the classical commuting case, this result can be written as a power series of Bessel type of certain differential operators acting on a single initial function. In the superspace setting, novel structures appear in the cases of negative even superdimensions. In these cases, the CK-extension depends on two initial functions on which two power series of differential operators act. These series are not only of Bessel type but they give rise to an additional structure in terms of Appell polynomials. This pattern also is present in the structure of the Pizzetti formula, which describes integration over the supersphere in terms of differential operators. We make this relation explicit by studying the decomposition of the generalized CK-extension into plane waves integrated over the supersphere. Moreover, these results are applied to obtain a decomposition of the Cauchy kernel in superspace into monogenic plane waves, which shall be useful for inverting the super Radon transform.

A method and apparatus for the stabilization and safe removal of buried waste that is tested and classified as being transuranic or not transuranic waste and disposed accordingly. The buried waste (usually in vertical pipe units) is enclosed in a casing and ground and mixed with the surrounding soil. This process allows for chemical reactions to occur that stabilizes the mixture. The entire process is contained within the casing to avoid contamination. In situ or external testing is done for radio isotopes to classify the waste. If it is classified as transuranic the waste is removed in a controlled way into a retrieval enclosure and disposed off in drums. If the waste is not transuranic then grout is introduced into the mixture, allowed to set and the resulting monolith is removed and buried in trenches.

Methods and systems for managing a removal of a passthrough device from a guest managed by a hypervisor in virtualized computing environment. A hypervisor receives a request from the guest for access to a passthrough device. The hypervisor sets, in a memory, a last accessed state associated with a virtual machine executing the guest. The hypervisor forwards the request to the passthrough device and configures the host CPU to send a subsequent access request directly to the passthrough device. In response to a virtual machine reset, the hypervisor clears the last accessed state and instructs the host CPU to send a post-reset access request to the hypervisor.

A non-aqueous liquid cleaning composition for applicators used for applying non-aqueous hair removal compositions to the skin. The composition includes a solubilizing oil effective for solubilizing the non-aqueous hair removal composition, e.g., mineral oil, and an effective antibacterial amount of an antibacterial agent, e.g., triclosan. The composition may also include fragrances and additional bacteriocides, e.g., phenoxyethanol. When the applicator is contacted with the heated cleaning composition any hair removal composition and bacteria on the applicator are removed therefrom and the applicator is ready for reuse. It is preferred to use surgical stainless steel applicators. Also provided are methods of using these compositions and kits containing, among other items, such compositions and applicators.

A method for detecting and conveying an alarm signal, when an absorbent article is unfastened or, completely removed from the body of the wearer. The method is intended to be used in parallel with a method for detecting wetness in the absorbent article and further relates to an integrated detection-and-alarm method for detecting unfastening and/or wetness in an absorbent article. A system for detecting and conveying an alarm signal when an absorbent article is unfastened or removed from the body of the wearer and/or when the article is wet. The system includes (a) and absorbent article having at least one absorbent layer, the object to be displaced, such as a fastening system, one or more sensoring devices, one or more transmitting devices, and (b) a remote receiver. Furthermore, the system relates to the use of the system in the care of children and adults suffering from incontinence and/or psychological illnesses.

The invention is a method of processing tarry or resinous liquids. Tarry liquids include wet scrubber liquids containing tars and chars derived from gasification, pyrolysis or drying of biomass. Resinous liquids include those derived from processing coniferous biomass. Tarry or resinous liquid is processed by a horizontal axis centrifuge having a discharge chamber containing a scraper to prevent centrifuge clogging or fouling. The removed tar and char can be used as solid fuel or recycled to the gasification or pyrolysis process. Polymers, for instance cationic polymers, can be added to the tarry or resin containing liquid prior to centrifugation to assist in solids/liquids separation. Removed resin can be recycled for further use. Tar, char or resin depleted wet scrubber liquid can be recycled for further use or more easily treated prior to disposal.

The invention relates to a so-called zero emission ‘AST-CNR/ITM system’ modular plant for removal of pollutants from flue gases produced by industrial processes. The plant comprises prefabricated modular elements with programmed and automatic operation, easy to mount and assemble on site without undergoing expensive plant stoppage. Each module or ‘reaction tower’ comprises a plurality of sections vertically arranged on top of one another, which carry out the following functions: Removal of particulate matter with treatment and removal of chemical pollutants, such as heavy metals, chlorides, fluorides Treatment and removal of SOx Treatment and removal of NOx Capture of CO2 Production of hydrogen Production of methanol. The various sections may be combined according to the requirements of the plant and of the flue gases to be treated.

A magnetic data storage medium may include a substrate, a magnetic recording layer, a protective carbon overcoat, and a monolayer covalently bound to carbon atoms adjacent a surface of the protective carbon overcoat. According to this aspect of the disclosure, the monolayer comprises at least one of hydrogen, fluorine, nitrogen, oxygen, and a fluoro-organic molecule. In some embodiments, a surface of a read and recording head may also include a monolayer covalently bound to carbon atoms of a protective carbon overcoat.

A cutting insert (14) is formed with an insert aperture (32) opening out to insert top and bottom surfaces (14A, 14B) of the cutting insert (14). In a plan view of the insert top surface (14A), the cutting insert (14) and the insert aperture (32) both have oblong shapes which are elongated along a common insert longitudinal axis (AIL). The aperture (32) includes first and second side surfaces (32A1, 32A2) which each extend along the insert longitudinal axis (AIL), and aperture first and second end surfaces (32B1, 32B2) which each extend transverse relative to the insert longitudinal axis (AIL). At least one of the aperture first and second end surfaces (32B1, 32B2) is formed with a clamping lip (32C1, 32C2).

An orthopedic cast removal tool and method uses an unmodified, typically cordless, rotary impact driver and a embedded wire to cut through an orthopedic cast for removal. By merging it with a slotted spacer block specifically for this cast removal purpose, an ergonomic tool is provided which allays fears of orthopedic patients. When rotating and encountering high resistance of the plaster or fiberglass material of the cast, the cordless rotary impact driver does not bog down; since it seamlessly engages impact action, which offers an order of magnitude or more torque multiplication via short frequent pulses (several per second) to overcome this torque resistance. Thus a high amount of torque with very little reaction force is made available to cut through a cast while affording the technician good control. The cast is cut very rapidly with little dust creation and no jostling of the patient.

A reactor installation tool and method for installing a reactor unit in a reactor tube. A reactor installation tool including a movable assembly and a fixed assembly linked together such that the movable assembly can be adjusted relative to the fixed assembly. The movable assembly including a reactor sleeve attachment means for releasably securing a reactor sleeve loaded with a reactor unit to the tool. The fixed assembly including an expandable clamping unit for releasably securing the tool to a reactor tube. A reactor unit can be installed in the reactor tube by adjusting the movable assembly to extract the reactor unit from the reactor sleeve as the fixed assembly is rigidly secured to the reactor tube. The fixed assembly can be released from the reactor tube and the reactor installation tool can be removed from the reactor tube.

A method for automatically detecting, eliminating and replacing flash frames in digital video utilizes the detected flash frames to categorize and tag the surrounding frames as a relevant area of the digital video. The flash frame is detected when acquiring digital video during capture, the flash frame is replaced with a newly-constructed frame that is interpolated based upon surrounding frames and then, using the detected flash as the timestamp, the frame is tagged.

Material removal tool (100), such as for forming surfaces of valve seats, includes an integral or separable reduced diameter circumferential insert housing (106) including a plurality of inserts (120) bonded thereto. The plurality of inserts (120) include cutting surfaces (122) at different axial and radial positions relative to the axis (112) of the material removal tool (100). Cutting surfaces (122) at different axial and radial positions are arranged at different angles to the axis (112), and at least one cutting surface (122) on at least one insert is at an angle of about 45 degrees relative to the axis (112). Cutting surfaces (122) can be located on one insert-type or different insert-types and can have different combinations of cutting surfaces (122). When arranged circumferentially on the insert housing (106), a N-effective material removal tool (100) is formed. Methods of machining using the N-effective material removal tool (100) is also disclosed.

A material removal having a plurality of cartridges mounted on an active portion where a plurality of seating members mounted in each of the plurality of cartridges pivots about an axis between a retracted position and an extended position is disclosed. Alternative embodiments have a single pivotable seating member. The pivotable extending seating members operate to extend and retract in a scissors-like motion and enable compact and efficient machining operation, particularly for crank shaft bearing supports.

A fluidic structure has a first chamber having a connection to a fluid reservoir and a connection to an array of apertures, the chamber forming a flow path between the fluid reservoir and the array of apertures, a second chamber having a connection to at least one vent connected to an atmosphere external to the fluidic structure, and at least one path between the first chamber and the second chamber.

A particle removal device for an ink jet printer is discussed. The particle removal device includes a first separator comprising an arrangement of obstacles including at least two rows of obstacles that extend laterally with respect to a flow path of ink in the first separator. The rows of obstacles are offset from one another by a row offset fraction. The arrangement of obstacles is configured to preferentially route larger particles having diameters greater than a critical diameter through the arrangement and along a first trajectory vector that is angled with respect to the direction of the flow path of the ink. The angle of the first trajectory vector with respect to the ink flow path is a function of the row offset fraction. Smaller particles having diameters less than the critical diameter travel through the arrangement along a second trajectory vector that is not substantially angled with respect to the flow path of the ink. The first separator causes a pressure drop of the ink of less than about 100 Pa.

An insertion and removal assembly for installing and removing hard drives from an enclosure, such as a computer chassis, is provided. The insertion and removal assembly includes a sliding member configured to receive a hard drive, a lever handle rotatably connected to the sliding member and an attachment wall having a plurality of protrusions defining a plurality of slots, each slot configured to receive one sliding member. A user reveals a slot for accepting the installation of the hard drive in the enclosure by pushing a tab on the attachment wall near a distal portion of the lever handle to release the lever handle and then pulling the lever handle outward exposing the sliding member. A hard drive is inserted into the sliding member and pushed inwardly into the chassis. Conversely, the sliding member can contain a hard drive which is partially ejected by unlatching and subsequently pulling the lever.

Deliquefication systems with an upper pumping section for discharging fluid pumped to it by a lower pumping section; in one aspect, for providing liquid from a wellbore to the upper section for removal of the liquid from the wellbore; and, in one aspect, such systems for dewatering a gas well. This abstract is provided to comply with the rules requiring an abstract which will allow a searcher or other reader to quickly ascertain the subject matter of the technical disclosure and is submitted with the understanding that it will not be used to interpret or limit the scope or meaning of the claims, 37 C.F.R. 1.72(b).

A tool for lifting a tile from the bore of a chimney or other vertical opening has pivotably connected arms. Jaws at the lower ends of the arms are offset from a lifting point of the tool and optionally, from the pivot point. An actuating mechanism closes the jaws. One mechanism comprises a screw that moves a nut and one or more toggle elements connected thereto. Another mechanism comprises toggle elements which connect to the upper ends of arms and pull on them when upward force is applied at a lifting point. A releasable latch keeps the arms of tool spaced apart while a tile wall is being engaged. At least one jaw is a thin plate; preferably the opposing jaw is pivotable. Both jaws may be angled relative to the principal axis of the tool.

A ferrous sulfide suspension that includes at least FeSm and Al(OH)3 and which can be used to reduce mercury emissions in flue gases. Through a combination of complex chemical reactions, precipitation, co-precipitation, and surface adsorption the ferrous sulfide suspension of the present invention effectively removes mercury from gaseous streams while concurrently preventing mercury re-emission.

Apparatus and method for removal of particles and VOC from an airstream, in which particles carried by the airstream are charged by a corona ionizer and then collected by an electrically enhanced filter downstream of the ionizer. A catalytic filter downstream of the electrically enhanced filter removes VOC as well as ozone generated by the ionizer.

One embodiment relates to a feedback receiver (FBR). The FBR includes a FBR signal input configured to receive a radio frequency (RF) signal, a first local oscillator (LO) signal input configured to receive a first LO signal having an LO frequency, and a second LO signal input configured to receive a second LO signal having the LO frequency. The second LO signal is phase shifted by approximately 90° relative to the first LO signal. FBR also includes a divider that induces a time-varying phase shift in the first and second LO signals while concurrently retaining a 90° phase shift between the first and second LO signals.

A turf cutter device, an infill extractor/collector device, and a turf wind-up device are used to facilitate the cost-effective removal of an infilled synthetic turf and the subsequent installation of a new turf at the same site, with minimal subsurface disruption. An infill extractor/collector device mounted on a motorized vehicle moves a relatively narrow strip of filled artificial turf from the surface, in front of the vehicle, and directs the strip to an infill removal station. The infill removal station inverts the strip and redirects the strip back toward the front of the vehicle, after agitating the strip to extract the infill. After redirecting the strip toward the front of the vehicle, the vehicle drives over the unfilled strip. Meanwhile, the extractor/collector device moves the extracted infill rearwardly to a bag located in a trailer. The turf cutter device is used prior to infill extraction, while the turf wind up device may be used before or after infill extraction, depending on whether infill extraction takes place at the field or at a remote site, respectively.

A vehicle bumper for use with police and other emergency vehicles for pushing another vehicle which is fabricated of a tubular loop defining a generally oval cross-section. The oval cross-section tubular loop is oriented such that the major axis of the oval cross-section extends front to back with respect to the host vehicle while the minor axis extends up and down. The vehicle bumper further supports a plurality of resilient pads to aid in controlling the pushed vehicle and to cushion impact transfer between the bumper and the pushed vehicle. The inventive vehicle bumper is substantially stronger and substantially lighter in weight while simultaneously providing a more attractive front view cross-section when mounted on a host vehicle. A plurality of attachments are secured to the tubular loop and are used in securing the vehicle bumper to a suitable portion of a host vehicle.

A method for selective removal and recovery of silica and silicon containing compounds from solutions that include silica and silicon containing compounds, including geothermal brines. Also included are methods of preventing silica scale buildup in the geothermal power equipment and processes employing geothermal brines by the selective removal of silica.

An assembly for moving wire from one point to a second point distant from the first point. The assembly comprises a first unit comprising a wire straightener and a second unit that moves the wire through the assembly.

A railroad tie removal machine for removing a railroad tie from beneath a pair of rails. The machine includes a movable frame, wherein when the frame is in a stationary location, a workspace is defined with respect to the stationary frame. A tie shear workhead and a kicker workhead are both mounted to the frame. The tie shear workhead includes two sets of shears configured and arranged to divide the tie into a center portion and two outer portions. The kicker workhead includes at least one kicker configured and arranged to outwardly kick corresponding outer portions of the cut tie from under the associated rail.

An implement for use in a bathroom or a kitchen which is composed of at least one rod which is oval in cross section, the rod being aesthetic in appearance and providing an advantageous force distribution over rods with circular cross sections. The implement can be a hanging device, such as a hanger, a hanger for ties and belts, and many other variations having a hook portion for engaging a cylindrical support, an over-the-door/vertical wall device also including the rods with the oval cross section, the latter devices being, for example, clothes supporting hooks, hooks for articles made from fabric; wire metal baskets having a rim and/or transition device made from a rod with an oval cross section; paper or magazine holders comprising parallel racks separated by upstanding walls; bag dispenser and handles for implements.

A system and method for processing biomass into hydrocarbon fuels that includes processing a biomass in a hydropyrolysis reactor resulting in hydrocarbon fuels and a process vapor stream and cooling the process vapor stream to a condensation temperature resulting in an aqueous stream. The aqueous stream is sent to a catalytic reactor where it is oxidized to obtain a product stream containing ammonia and ammonium sulfate. A resulting cooled product vapor stream includes non-condensable process vapors comprising H2, CH4, CO, CO2, ammonia and hydrogen sulfide.

A green process and system are disclosed for utilizing a biomass filter aid in the filtration of a bio-oil. The process comprises filtering a bio-oil containing residual solids from a conversion reaction in the presence of the biomass filter aid to produce a filtered bio-oil. The biomass filter aid facilitates efficient removal of residual solids from the bio-oil. The spent biomass filter aid containing the residual solids may be recycled as a conversion feedstock or used as a combustion heat source in the biomass conversion system.

A system for dampening fluid recovery in an ink-based digital printing system includes a seal manifold having a front seal portion, the front seal portion having an upper wall facing the imaging surface, the upper wall being configured to define an air flow channel with the imaging surface, the upper wall being contoured to form a distance between the upper wall and the imaging surface at an evaporation location that is less than distance between the upper wall and the imaging surface at locations interposing the evaporation location and a vacuum inlet channel of the seal manifold.

This invention relates to sulfur based compounds useful in methods of carbon dioxide or sulfur dioxide removal.

A natural gas-containing stream such as biogas from landfills and sewage treatment plants is freed of siloxane contaminants by passing the biogas through a bed containing an adsorbent having a neutral surface, which adsorbs the siloxanes. When the bed of neutral adsorbent is filled to capacity, the adsorbent bed is heated to remove the siloxanes and regenerate the bed. The neutral adsorbent reduces disadvantageous reactions between the adsorbent and siloxane and other impurities in the natural gas-containing stream.

In one implementation, a substance removal apparatus may include a collection unit and a removal unit. The collection unit may have a structure forming a channel and an inlet to receive an exhaust from a print system. The removal unit may separate a substance from the exhaust and transfer heat from the exhaust to the print system. The removal unit may include a heat exchanger and an impaction mechanism.

A tool for removing shrink wrap from a product may include a first abrasive surface, a second abrasive surface, and a pressing surface, where the first and second abrasive surfaces are movable with respect to one another between an engaged position and a disengaged position, and where in the engaged position, the pressing surface presses the product into engagement with the first abrasive surface and the second abrasive surface. The first abrasive surface and the second abrasive surface may be located on a first arm and a second arm respectively. The first abrasive surface may be stationary relative to the first arm and the second abrasive surface may be stationary with respect to the second arm. The pressing surface may include a pressing element which is rotatable around an axis.

An apparatus includes a gas burner assembly which includes a gas burner and a gas supply conduit. The gas burner includes a gas supply opening and a substantially cylindrical socket formed on the exterior of the gas burner around the gas supply opening. The gas supply conduit includes an opening at an end and a substantially tubular adjoining section proximate to the opening. The adjoining section is configured to mate with the socket and includes a substantially radial protrusion. The socket includes a substantially radial depression for receiving the protrusion. As the gas supply conduit is connected with the gas burner to establish fluid communication at the gas supply opening, the protrusion is engaged in the depression thereby aligning the adjoining section in a predetermined manner about the socket and restricting rotational movement of the adjoining section about the socket.

The tire run-flat ring removal and installation machine includes three basic embodiments, each having a tire support table (14) and actuators for removing and/or reinstalling the run-flat ring (R) in the tire (T). The actuators may be hydraulically, pneumatically, or electromechanically powered, and save the technician considerable time and effort in the process.

Embodiments of the invention generally relate to a method for selectively etching or otherwise removing copper or other metallic contaminants from a substrate, such as a gallium arsenide wafer. In one embodiment, a method for selectively removing metallic contaminants from a substrate surface is provided which includes exposing a substrate to a peroxide clean solution, exposing the substrate to a hydroxide clean solution, and exposing the substrate to a selective etch solution containing potassium iodide, iodine, sulfuric acid, and water during a selective etch process. The substrate generally contains gallium arsenide material, such as crystalline gallium arsenide, and is usually a growth substrate for an epitaxial lift off (ELO) process. The copper or other metallic contaminants disposed on the substrate may be selectively etched at a rate of about 500 times, about 1,000 times, about 2,000 times, or about 4,000 times or greater than the gallium arsenide material.

A concrete saw is disclosed having a rigid metal frame, a hydraulic drive system, a water-cooled hub, and an axially rotatable trigger assembly comprising a 12 volt switch. The saw may include a hydraulic pump operable to supply pressurized hydraulic fluid to the drive system. In some embodiments, the saw may includes a flow sharing valve fluidly coupled to the hydraulic drive system to distribute the pressurized hydraulic fluid from the a hydraulic pump in a portable power pack. A method of removing trip hazards with the saw is also disclosed.