Apple's camera module supplier for the upcoming iPhone SE 4 is set to begin mass production of the components in December, according to a new report coming out of Korea.


Economic newspaper Ajunews reports that LG Innotek will supply the front camera module for the budget-friendly fourth-generation device. Final tests are now said to be underway, with mass production of the module following next month.

The outlet reports that LG Innotek usually supplies camera modules around three months before the launch of new smartphones, which tallies with rumors of an iPhone SE 4 launch in March or April 2025. Apple analyst Ming-Chi Kuo estimates that Apple suppliers will produce around 8.6 million iPhone SE 4 units through the first quarter of next year.

The sub-$500 device is expected to feature a design similar to the base iPhone 14. Rumored specifications include a 6.1-inch OLED display, Face ID, a newer A-series chip, a USB-C port, a single 48-megapixel rear camera, 8GB of RAM to support Apple Intelligence, and Apple's first in-house 5G modem. Apple released the existing iPhone SE in March 2022.

The real threat is collusion. When journalists strike secret alliances with the very people they're supposed to be holding accountable, we are in deep trouble. Lies go unchallenged.  Democracy cannot function. And that's what we're watching right now. Continue reading →

Alright, today we're going to cover some common questions you may have
about the Stage Shredded Status DVD's before
they sell out...

==> Click here to learn how this transformation went down...


If you've seen the video but have some questions before ordering:

Question: Is SSS a documentary of Vince Delmonte's transformation or is there an actual program included?

Answer: Yes, SSS includes an entire program (covered on 3 of the 8 disks) and it was filmed with former NFL lineman and NPC level bodybuilder Ryan Watson! They are both pretty jacked up in this workout so it's pretty motivating too!

What Vince is going to do for anyone who orders is send you the printable workout sheets of the Stage Shredded Status workout program! Just email him your receipt to the help desk for proof of purchase!

You'll love this program because it relies on a variance of rep ranges to target, specifically, the Type 11a & Type 1a muscle fibers which create the training effect of
hypertrophy and strength-endurance. The combos generate a lot of lactate to boost growth hormone levels to assist in fat loss. You don't do super heavy loads because heavy lifting does not involve enough mechanical stress to promote fat loss.
Plus, you would not normally lift super heavy when you get leaner because your joints have less fluid and fat to protect them from the bigger forces.

Question: What if I have more than 50 lbs to lose?

Answer: Heck, Vince had 30 lbs to lose so you're programming
is going to be no different than his. The only difference is that you have an extra 8-10 weeks to travel. Let's go!

==> Get 6-Pack Abs By Summertime!



Question: Is SSS for a complete beginner?

Answer: If Vince only cared about selling his DVD's I would say yes but if you have less than one year experience in his crazy fitness world, you'll probably find his approach a little too hardcore for now. Sit this one up unless you're absolutely intrigued to see how this goes down.

The weight training program is far too advanced and you would be better off learning the nutritional principles in No Nonsense Muscle Building, which focuses on a balanced approach to eating. You need to master a balanced
approach before implementing some of the more advanced things they did.

Question: I noticed you had an ENTIRE cupboard full of supplements.
Am I supposed to take all of those?!?!

Answer: When it comes to supplementation, that's a personal choice.

In the DVD's Vince explains WHY he takes what he takes and encourages you to just sit back and consider it an educational experience. Then, as you choose, start to add one new supplement a month and measure
the response. There are SO MANY supplements he's interested in trying himself but he likes to add one new thing at a time so he will get there when he gets there.

Question: What if I only have 10 lbs of fat to lose?

Answer: Again, the same principles apply and you'll learn how Vince adjusted his cardio intensity and frequency as he gets closer to the show to ensure he does not lose muscle the last few weeks.

You'll see EXACTLY how he changed his diet from phase to phase (He changed it three times throughout the 16 weeks) and you'll see some creative ways to switch around your macros and food sources
that assist with fat loss, WITHOUT dropping your calories.

==> Get 6-Pack Abs By Summertime!

Question: Is Ben Pakulski in any of the DVD's?

Answer: YES! The first 2 DVDs start off in Toronto when Vince is looking pretty bulky and they get 2 hours of coaching on the gym floor with Ben & Intentions! If you bought MI40 then you already have this footage but it's worth reviewing and owning it on hardcopy. I know that every time I watch this footage, I re learn something new and then BOOM, I have a better workout!

If you don't have this footage, heck, the first 2 hours is worth 3x the price of the DVDs because Ben bills $150 an hour! This is the kind of information that propelled him into the ranks of the top ten bodybuilders in the world this past month!

Question: How long are the DVDs on sale?

Answer: It depends... we have about 550 left in stock now and the $50 off sale ends Sunday night or whenever he sells out... Whatever comes first.

Trust that helps and THANK YOU for your interest in Vince's work. This is, by far, the best fat loss resource he's ever released. Grab it while you can!

Here is the $50 Off Discount link to get your DVDs shipped right now!

Get 6-Pack Abs By Summertime!


P.S. Vince ships all over the world!

Here in this video I talk about where I was and where I am now with my fitness progress. I give a lot of credit to Vince Delmonte pertaining to my fitness achievements and where I am in my personal/ business life.  On this site you will find a lot of my own articles and Vince's articles pertaining to building muscle. You can reach me on my Facebook fan page here http://www.facebook.com/TimmErnstFitness

Vince Delmonte is the real deal and cares about his followers progress and muscle building goals. His philosophy is, "If you can Live Large inside of the gym, You can Live Large outside of the gym.

Do you have all of your SUPPLIES?

In most Pagan traditions it is very important to purify or cleanse a space prior to beginning any sort of ritual. Although there are a different ways of doing this, how you do it will depend on the tradition you follow as well as what you feel comfortable with.

Usually, when ritually purifying an area, most do it deosil and spiraling inwards to the center. There are times when moving in a widdershins direction is appropriate, most notably for Banishing Ritual.


These methods are some examples of common ways to cleanse a space for ritual.

Smudging

Smudging uses smoke, which will carry negative energy away from the area. Traditionally White Sage is used, however, other dried herbs can be added, such as Cilantro, Cedar, Lavender and Mugwort. The herbs are bound with string into a bundle, which is commonly referred to as a “stick”.

When lighting the bundle, try to make it flame for a moment if possible, then blow the flame out. This will leave you with a smoldering, smoking herb bundle. Once you have achieved the smoldering bundle stage it is time to smudge the house.

Now you don’t take the bundle and rub it on the walls and other things in the room, which would make a mess and probably ruin a few things and maybe even start a nice fire. What you do is this. Hold the smoldering bundle in one hand or in a heatproof object, like a shell. With either a fan or your free hand you waft the smoke to the edges of the room, making sure to get it into the corners.

When you have finished smudging you can either snuff out the smoldering end of the bundle by setting it into some sand or by crushing the end. An alternative method is to douse it under a bit of water, making sure to let it dry completely before attempting to use it again.

Sweeping
By long tradition, the broom is associated with cleaning and purification. The broom can be either a special one used solely for ritual cleansing or even your household broom. Use a broom or besom going around the edges of the space, with your intent being to sweep negativity away as you go. Here's a good idea. Start and finish near a door--that way, negative energy is swept outside, rather quite literally.

Asperging
Asperging is the sprinkling with a liquid in order to effect spiritual and magical cleansing. Most people will associate Asperging with the Catholic Church, however the practice is also widely used by pagans for cleansing prior to rituals.

It can be accomplished in many ways. The simplest of these is to have a premixed liquid of your choice and bundle of fresh herbs that you can dip into the water. Then you take the herbs, dip them in the liquid and with a quick flick you throw the liquid off the herb and into area or onto the object to be cleansed. You don’t want or need to have a lot of liquid being thrown though. Just small droplets are perfect. Herbs that are prefect to use are Sage, Lavender, Vervain, Hyssop, Pine, Rue and Rosemary.

Another option that can be used quite effectively to cleanse a space is the use of incense. This can be either in cone form, stick, or powder and charcoal. The incense should be for working with cleaning, purification and even protection if you want to add that bit into the cleansing.

During your cleansing and purification of your space you can also include a little chant to augment the process. There are many to be found on the Internet as well as in books. You might even have one in mind already, in that case write it down so you will remember it for the next time you want to cleanse a room.

In addition to the above, I also ensure that the space is physically cleaned as well. I try to use a non-toxic homemade cleanser to do this. How you physically clean is of course up to you.

I would be remiss if I didn’t do a shameless plug for our online store where we carry many items that are perfect for what I have just talked about. Stop by Grove of the Ancients Pagan Marketplace today and order cleansing supplies.

Blessed Be!

View the original article here

REVIEW – I’ve had my two Dell monitors for a while, but I’ve yet to find a monitor arm that fits the weight of my 32″ curved screen. I tried my heavy duty work arms, yet no matter how tight I made it, it would slide down and rest on the desk. The LiftSync Dual […]

In today’s economy, parting with hard-earned dollars to support your favorite charity or cause just may not be feasible. Consider donating yourself and your time as a way to give back without impacting your piggy bank.

Here’s how Chris Knoll, a cartographer here at NatGeo Maps, is giving back:

As part of an ongoing effort to support access to some of Colorado’s most popular 14er mountains, I participated in a stewardship adventure with Volunteers for Outdoor Colorado who partnered with Colorado Fourteeners Initiative. The main focus of this project was to work on building a sustainable trail up to 14,172 foot peak Mount Bross; which is near Fairplay, CO (90 miles southwest of Denver). Due to numerous unmarked mine shafts and a network of unmanaged social trails, access to the summit of Mount Bross was closed in 2006 until private land owners in conjunction with the US Forest Service can come to an agreement on the new route.

This is where the volunteers come in to action. Four crews totaling about forty people were given the task of stabilizing, reconstructing, and rerouting a trail leading up to Mt. Bross. The work included building sustainable portions of trail by installing rock steps where trail erosion is present, delineating one path up the mountain, and covering up social trails by re-vegetating these areas with native tundra plants that grow at higher elevations.

After work was completed each day, volunteers were fed by VOC staff, and were given the opportunity to socialize around the campfire and even take short hikes in the area. However, nights were called in early due to early 5:45 a.m. wake up calls.

All in all, the work that was completed over the weekend was meaningful and fun. It gives me a great sense of accomplishment knowing that one day, I will be able to hike a trail that I helped to construct.

For more information on non-profit volunteer groups mentioned in this article, check out http://www.voc.org, and http://www.14ers.org.

~Chris Knoll, Cartographer, National Geographic Maps

1. Monster Hunter Outlanders Brings Big Beast Hunting to Mobile Gaming  CNET
2. Monster Hunter is going mobile with new ‘fully featured game’ Outlanders  Polygon
3. Monster Hunter is getting an open-world RPG spinoff for mobile  The Verge
4. TiMi Studio Group and Capcom announce Monster Hunter Outlanders for iOS, Android  Gematsu
5. How to join the Monster Hunter Outlanders playtest  ONE Esports

The short answer to this question is, yes. While the rules have changed a bit since the early days of raising money online, the necessary elements all still exist in great supply. These are; a large and motivated donor pool, innovative organizations and fundraisers and the technology that brings it all together. This post will cover this complex topic with updates to come. In the mean time, voice your opinion on the relevancy of online fundraising in the comments section below.

The first step to success in online fundraising is the cause. While its possible to raise money for just about anything, what really promotes success is having a well defined mission statement. This is something that resonates with donors quickly. The shorter it takes to express your mission statement, the more likely it is that donors will stick around to learn more about your organization and its needs. This does not necessarily mean that they'll make a contribution, but donors who leave your site out of boredom, frustration or confusion certainly wont be making any.

After a well defined cause, presentation is the next most important element of online fundraising. Donors are quick to leave sites that are'nt easy to navigate. Ideally donors should be able to make an online gift in just one or two steps, the more complicated a donation system is, the less likely donations are to be made. Simple. modern interfaces are the key to increasing online donations.

Wow, this month sure went by fast. I'm sure I say that every October, as this is the busiest time of year at work, and stuff like football and Maybe The Last Nice Day This Year keep me busy.

I've been plugging away at this math/programming project, currently porting some numerical code that I don't fully understand and finding bugs in it and improving its performance. It's relaxing, at least, but there's nothing good to share here yet and I'm not sure it'll ever make an interesting story. I did make some version-2 circuit boards for a project I've been working on in parallel, too, but the next step in that one is going to be annoying ("Why won't it boot?") so I've been putting it off.

They brought the small neighborhood race called "Run Shadyside" back this year. This is a 5k course that I can easily walk to the start of, and Shadyside is about as flat as it gets in Pittsburgh, so it's a nice race to try to PR in. I've been keeping in pretty good shape (despite the setback due to illness mentioned previously), but that morning I was having some burning lungs so I didn't push myself too hard. (Could have been mold? Bad air quality? Slightly sick?) I finished in 20m19s, which is probably my third best official 5K time, although a bit disappointing since I ran several unofficial treadmill 5Ks under 19 minutes this summer. I finished 3rd in my age group. The results feature a new capitalization of my name, the elusive Stegosaurus CasE: "Tom Murphy ViI"

Craving a game that would make proper use of the GeForce 4090, I installed Call Of Duty: Cold War. Actually this game is a couple years old, and graphically it's not anything particularly special. I am liking the single-player campaign more than usual for these kinds of games, and avoiding getting sucked into multiplayer. I gave the "zombies" mode a shot and I think I finally understand it, like playing a roguelike on a single seed. I think I'm at the point where I need to set myself some kind of challenge and complete it and retire to more artful things, though.

I’m traveling for the long weekend. Either I’m having bad luck with the epic heat waves or there have been a lot of epic heat waves, because again the short road trip threatens to be tyrannized by the hot air. It did at least touch 100°F this time, so at least it is a proper respectable heat wave. We are in a place called Hocking Hills, whose AirBnB has these OBX-style stickers that say “HHO”, which could either be confusingly “Hills, HOcking,” or perhaps “Hocking Hills, Ohio”, but not “Hocking hills OHio” as one might expect. I plan to stick the sticker upside-down for “OHH”, as in “Ohh yeah, I need to write a post on Tom 7 Radar for the month of August, and I need to do it on this mediocre wi-fi which Google Internet Speed Test describes as ‘fine’ while everyone else drinks beers outside.” Fair enough: This is a self-imposed curse and one that’s easily tended to at any time during the month.

During the month: I worked again on making my own video codec, which is a very bad way to spend one’s time, but I don’t think there are any modern lossless codecs that would be suitable for my use case. And I do like a data compression project because of the inherent benchmarkability. The use case is for the increasingly common situation where I have a program generating a series of video frames (e.g. BoVeX is making an animation), which I usually do by writing a sequence of PNG files to disk. I’m way ahead of PNG files so far even without doing any inter-frame stuff, which is not impressive, but does make me feel like it’s at least not totally pointless. (Still, it’s quite pointless: Sure I can make these files smaller at significant cost of complexity and encoding times, but these animations typically use space similar to like one second of 4K 60fps XF-AVC footage.)

Sometimes programming your own lossless video codec is a bit too fast-paced so you need to write a Wikipedia article from scratch about Clairton Coke Works by digging through newspaper archives. I haven't even gotten to the last 30 years of its history yet! I also rounded out the Cyrillic in FixederSys though I don't think I've uploaded a new version of that yet. As usual I did some hacking on secret projects.

UHH, elsewise, I did finish off Animal Well which I liked very much. My spoilerless advice to you is: Don't try to 100% this game without at least looking at a spoiler-controlled guide! But I did have fun once I felt like I was stuck-ish finishing the remaining postgame puzzles. I have also been playing Chippy, a bullet-hell twin-stick shooter that is quite hard (I usually feel good at this genre) and has several new good ideas in it. It's essentially all boss fights, and the chief innovation is that you fight the giant bosses by disconnecting pieces of them. I'm on the last boss so I will probably finish that one soon. As I have confessed many times, I like dumb first-person shooter games, and I played through Trepang 2 this month as well. It does have a few moments, but it was mostly pretty dumb, like I wanted. And then I started Touhou Luna Nights, which is a "Metroidvania" fan-game with great pixel art and music.

OK, I should get back to this vacation!

I sat in my crumbling courthouse a couple of months ago, having edged past the permanently-stuck gate on the justices' car park, and made my way up the nearly-new lift to the assembly room. It is a handsome room, built in 1907 but has sadly not seen a lick of paint in the last decade-and-a-half and more.

Everywhere are signs of decay and neglect - but no matter. I understand the desperate need for the government to bring expenditure under control, even if that means denying resources to the public service that I have served unpaid these thirty years. There are still biscuits (amazingly) and most of the lights come on when you press a switch. There is some mysterious  kit that we think might be for use in the new all-electronic courthouse. It still bears the protective film that we see on expensive audio visual stuff to protect it on its long journey from a Chinese sweatshop.

I have recently received an email from  www.gov.uk/annual-tax-summary setting out the tax that I paid in the last fiscal year setting out the tax that I paid (direct tax only, so forget the taxes on consumption such as liquor duties and Council Tax (fifty quid a week on my modest Thames Valley bungalow).

Much more interesting is the breakdown of where it went, revealing how little our fellow citizens know of what is done with the country's collective cash.

Not that much goes on the justice system.

Last week I finished a new service written in Common Lisp. It now runs in production© every mornings, and it expands the set of services I offer to clients.

It’s the 4th service of this kind that I developed: - they are not big - but have to be done nonetheless, and the quicker the better (they each amount to 1k to 2k lines of Lisp code), - they are not part of a super advanced domain that requires Common Lisp superpowers - I am the one who benefits from CL during development, - I could have written them in Python - and conversely nothing prevented me from writing them in Common Lisp.

So here lies the goal of this post: illustrate that you don’t need to need a super difficult problem to use Common Lisp. This has been asked many times, directly to me or on social media :)

At the same time, I want to encourage you to write a little something about how you use Common Lisp in the real world. Sharing creates emulation. Do it! If you don’t have a blog you can simply write in a new GitHub repository or in a Gist and come share on /r/lisp. We don’t care. Thanks <3

We’ll briefly see what my scripts do, what libraries I use, how I deploy them, what I did along the way.

Needless to say that I dogfooded my CIEL (beta) meta-library and scripting tool for all those projects.

Table of Contents

• Scripts n°4 and 2 - shaping and sending data - when you can write Lisp on the side
  • SFTP
  • Deploying
  • Script n°2 and simple FTP
• Scripts n°3 and 1 - complementary web apps
• Lasting words
• Links

Scripts n°4 and 2 - shaping and sending data - when you can write Lisp on the side

My latest script needs to read data from a DB, format what’s necessary according to specifications, and send the result by SFTP.

In this case I read a DB that I own, created by a software that I develop and host. So I could have developed this script in the software itself, right? I could have, but I would have been tied to the main project’s versioning scheme, quirks, and deployment. I rather had to write this script on the side. And since it can be done on the side, it can be done in Common Lisp.

I have to extract products and their data (price, VAT...), aggregate the numbers for each day, write this to a file, according to a specification.

To read the DB, I used cl-dbi. I didn’t format the SQL with SxQL this time like in my web apps (where I use the Mito light ORM), but I wrote SQL directly. I’m spoiled by the Django ORM (which has its idiosyncrasies and shortcomings), so I double checked the different kinds of JOINs and all went well.

I had to group rows by some properties, so it was a great time to use serapeum:assort. I left you an example here: https://dev.to/vindarel/common-lisps-group-by-is-serapeumassort-32ma

Dates have to be handled in different formats. I used local-time of course, and I still greatly appreciate its lispy formatter syntax:

(defun date-yymmddhhnnss (&optional date stream)
  (local-time:format-timestring stream
                                (or date (local-time:now))
                                :format
                                '((:year 4)
                                  (:month 2)
                                  (:day 2)
                                  (:hour 2)
                                  (:min 2)
                                  (:sec 2)
                                  )))

the 2 in (:month 2) is to ensure the month is written with 2 digits.

Once the file is written, I have to send it to a SFTP server, with the client’s codes.

I wrote a profile class to encapsulate the client’s data as well as some functions to read the credentials from either environment variables, the file system, or a lisp variable. I had a top-level profile object for ease of testing, but I made sure that my functions formatting or sending data required a profile parameter.

(defun send-stock (profile &key date) ...)
(defun write-stock (profile filename) ...)

Still nothing surprising, but it’s tempting to only use global parameters for a one-off script. Except the program grows and you pay the mess later.

SFTP

To send the result through SFTP, I had to make a choice. The SFTP command line doesn’t make it possible to give a password as argument (or via an environment variable, etc). So I use lftp (in Debian repositories) that allows to do that. In the end, we format a command like this:

lftp sftp://user:****@host  -e "CD I/; put local-file.name; bye"

You can format the command string and run it with uiop:run-program: no problem, but I took the opportunity to release another utility:

• https://github.com/vindarel/lftp-wrapper

First, you create a profile object. This one-liner reads the credentials from a lispy file:

(defvar profile (make-profile-from-plist (uiop:read-file-form "CREDS.lisp-expr"))

then you define the commands you’ll want to run:

(defvar command (put :cd "I/" :local-filename "data.csv"))
;; #<PUT cd: "I/", filename: "data.csv" {1007153883}>

and finally you call the run method on a profile and a command. Tada.

Deploying

Build a binary the classic way (it’s all on the Cookbook), send it to your server, run it.

(during a testing phase I have deployed “as a script”, from sources, which is a bit quicker to pull changes and try again on the server)

Set up a CRON job.

No Python virtual env to activate in the CRON environment...

Add command line arguments the easy way or with the library of your choice (I like Clingon).

Script n°2 and simple FTP

My script #2 at the time was similar and simpler. I extract the same products but only take their quantities, and I assemble lines like

EXTRACTION STOCK DU 11/04/2008
....978202019116600010000001387
....978270730656200040000000991

For this service, we have to send the file to a simple FTP server.

We have a pure Lisp library for FTP (and not SFTP) which works very well, cl-ftp.

It’s a typical example of an old library that didn’t receive any update in years and so that looks abandoned, that has seldom documentation but whose usage is easy to infer, and that does its job as requested.

For example we do this to send a file:

(ftp:with-ftp-connection (conn :hostname hostname
                                   :username username
                                   :password password
                                   :passive-ftp-p t)
      (ftp:store-file conn local-filename filename))

I left you notes about cl-ftp and my SFTP wrapper here:

• https://dev.to/vindarel/ftp-and-sftp-clients-for-common-lisp-1c3b

Scripts n°3 and n°1 - specialized web apps

A recent web app that I’m testing with a couple clients extends an existing stock management system.

This one also was done in order to avoid a Python monolith. I still needed additions in the Python main software, but this little app can be independent and grow on its own. The app maintains its state and communicates it with a REST API.

It gives a web interface to their clients (so my clients’ clients, but not all of them, only the institutional) so that they can:

• search for products
• add them in shopping carts
• validate the cart, which sends the data to the main software and notifies the owner, who will work on them.

The peculiarities of this app are that:

• there is no user login, we use unique URLs with UUIDs in the form: http://command.client.com/admin-E9DFOO82-R2D2-007/list?id=1
• I need a bit of file persistence but I didn’t want the rigidity of a database so I am using the clache library. Here also, not a great activity, but it works©. I persist lists and hash-tables. Now that the needs grow and the original scope doesn’t cut it any more, I wonder how long I’ll survive without a DB. Only for its short SQL queries VS lisp code to filter data.

I deploy a self-contained binary: code + html templates in the same binary (+ the implementation, the web server, the debugger...), with Systemd.

I wrote more on how to ship a standalone binary with templates and static assets with Djula templates here:

• https://lisp-journey.gitlab.io/blog/lisp-for-the-web-build-standalone-binaries-foreign-libraries-templates-static-assets/

I can connect to the running app with a Swank server to check and set parameters, which is super helpful and harmless.

It is possible to reload the whole app from within itself and I did it with no hiccups for a couple years, but it isn’t necessary the most reliable, easiest to set up and fastest method. You can do it, but nobody forces you to do this because you are running CL in production. You can use the industry’s boring and best practices too. Common Lisp doesn’t inforce a “big ball of mud” approach. Develop locally, use Git, use a CI, deploy a binary...

Every thing that I learned I documented it along the way in the Cookbook ;)

Another app that I’ll mention but about which I also wrote earlier is my first web app. This one is open-source. It still runs :)

In this project I had my friend and colleague contribute five lines of Lisp code to add a theme switcher in the backend that would help him do the frontend. He had never written a line of Lisp before. Of course, he did so by looking at my existing code to learn the existing functions at hand, and he could do it because the project was easy to install and run.

(defun get-template(template &optional (theme *theme*))
  "Loads template from the base templates directory or from the given theme templates directory if it exists."
  (if (and (str:non-blank-string-p theme)
           (probe-file (asdf:system-relative-pathname "abstock" (str:concat "src/templates/themes/" theme "/" template))))
      ;; then
      (str:concat "themes/" theme "/" template)
      ;; else :D
      template))

He had to annotate the if branches :] This passed the code review.

Lasting words

The 5th script/app is already on the way, and the next ones are awaiting that I open their .docx specification files. This one was a bit harder but the Lisp side was done sucessfully with the efficient collaboration of another freelance lisper (Kevin to not name him).

All those tasks (read a DB, transform data...) are very mundane.

They are everywhere. They don’t always need supercharged web framework or integrations.

You have plenty of opportunities to make yourself a favor, and use Common Lisp in the wild. Not counting the super-advanced domains where Lisp excels at ;)

Links

• https://lispcookbook.github.io/cl-cookbook/
• awesome-cl
• companies using Common Lisp in production (at least the ones we know)
• Common Lisp course in videos – it helps me, and you ;) I added 9 videos about CLOS last month, and more are coming. It’s 86 minutes of an efficient code-first approach, out of 7+ hours of total content in the course. After this chapter you know enough to read the sources of the Hunchentoot web server or of the Kandria game.

I have done some preliminary Common Lisp exploration prior to this course but had a lot of questions regarding practical use and development workflows. This course was amazing for this! I learned a lot of useful techniques for actually writing the code in Emacs, as well as conversational explanations of concepts that had previously confused me in text-heavy resources. Please keep up the good work and continue with this line of topics, it is well worth the price! [Preston, October of 2024]

 .