Highly accurate protein structure prediction can generate accurate models of protein and protein–protein complexes in X-ray crystallography. However, the question of how to make more effective use of predicted models for completing structure analysis, and which strategies should be employed for the more challenging cases such as multi-helical structures, multimeric structures and extremely large structures, both in the model preparation and in the completion steps, remains open for discussion. In this paper, a new strategy is proposed based on the framework of direct methods and dual-space iteration, which can greatly simplify the pre-processing steps of predicted models both in normal and in challenging cases. Following this strategy, full-length models or the conservative structural domains could be used directly as the starting model, and the phase error and the model bias between the starting model and the real structure would be modified in the direct-methods-based dual-space iteration. Many challenging cases (from CASP14) have been tested for the general applicability of this constructive strategy, and almost complete models have been generated with reasonable statistics. The hybrid strategy therefore provides a meaningful scheme for X-ray structure determination using a predicted model as the starting point.

Form factors based on aspherical models of atomic electron density have brought great improvement in the accuracies of hydrogen atom parameters derived from X-ray crystal structure refinement. Today, two main groups of such models are available, the banks of transferable atomic densities parametrized using the Hansen–Coppens multipole model which allows for rapid evaluation of atomic form factors and Hirshfeld atom refinement (HAR)-related methods which are usually more accurate but also slower. In this work, a model that combines the ideas utilized in the two approaches is tested. It uses atomic electron densities based on Hirshfeld partitions of electron densities, which are precalculated and stored in a databank. This model was also applied during the refinement of the structures of five small molecules. A comparison of the resulting hydrogen atom parameters with those derived from neutron diffraction data indicates that they are more accurate than those obtained with the Hansen–Coppens based databank, and only slightly less accurate than those obtained with a version of HAR that neglects the crystal environment. The advantage of using HAR becomes more noticeable when the effects of the environment are included. To speed up calculations, atomic densities were represented by multipole expansion with spherical harmonics up to l = 7, which used numerical radial functions (a different approach to that applied in the Hansen–Coppens model). Calculations of atomic form factors for the small protein crambin (at 0.73 Å resolution) took only 68 s using 12 CPU cores.

Metal-based complexes with their unique chemical properties, including multiple oxidation states, radio-nuclear capabilities and various coordination geometries yield value as potential pharmaceuticals. Understanding the interactions between metals and biological systems will prove key for site-specific coordination of new metal-based lead compounds. This study merges the concepts of target coordination with fragment-based drug methodologies, supported by varying the anomalous scattering of rhenium along with infrared spectroscopy, and has identified rhenium metal sites bound covalently with two amino acid types within the model protein. A time-based series of lysozyme-rhenium-imidazole (HEWL-Re-Imi) crystals was analysed systematically over a span of 38 weeks. The main rhenium covalent coordination is observed at His15, Asp101 and Asp119. Weak (i.e. noncovalent) interactions are observed at other aspartic, asparagine, proline, tyrosine and tryptophan side chains. Detailed bond distance comparisons, including precision estimates, are reported, utilizing the diffraction precision index supplemented with small-molecule data from the Cambridge Structural Database. Key findings include changes in the protein structure induced at the rhenium metal binding site, not observed in similar metal-free structures. The binding sites are typically found along the solvent-channel-accessible protein surface. The three primary covalent metal binding sites are consistent throughout the time series, whereas binding to neighbouring amino acid residues changes through the time series. Co-crystallization was used, consistently yielding crystals four days after setup. After crystal formation, soaking of the compound into the crystal over 38 weeks is continued and explains these structural adjustments. It is the covalent bond stability at the three sites, their proximity to the solvent channel and the movement of residues to accommodate the metal that are important, and may prove useful for future radiopharmaceutical development including target modification.

Carbonic anhydrase (CA) was among the first proteins whose X-ray crystal structure was solved to atomic resolution. CA proteins have essentially the same fold and similar active centers that differ in only several amino acids. Primary sulfonamides are well defined, strong and specific binders of CA. However, minor variations in chemical structure can significantly alter their binding properties. Over 1000 sulfonamides have been designed, synthesized and evaluated to understand the correlations between the structure and thermodynamics of their binding to the human CA isozyme family. Compound binding was determined by several binding assays: fluorescence-based thermal shift assay, stopped-flow enzyme activity inhibition assay, isothermal titration calorimetry and competition assay for enzyme expressed on cancer cell surfaces. All assays have advantages and limitations but are necessary for deeper characterization of these protein–ligand interactions. Here, the concept and importance of intrinsic binding thermodynamics is emphasized and the role of structure–thermodynamics correlations for the novel inhibitors of CA IX is discussed – an isozyme that is overexpressed in solid hypoxic tumors, and thus these inhibitors may serve as anticancer drugs. The abundant structural and thermodynamic data are assembled into the Protein–Ligand Binding Database to understand general protein–ligand recognition principles that could be used in drug discovery.

Ultra-intense, ultra-fast X-ray free-electron lasers (XFELs) enable the imaging of single protein molecules under ambient temperature and pressure. A crucial aspect of structure reconstruction involves determining the relative orientations of each diffraction pattern and recovering the missing phase information. In this paper, we introduce a predicted model-aided algorithm for orientation determination and phase retrieval, which has been tested on various simulated datasets and has shown significant improvements in the success rate, accuracy and efficiency of XFEL data reconstruction.

Cryogenic electron microscopy (cryo-EM) is a pivotal technique for imaging macromolecular structures. However, despite extensive processing of large image sets collected in cryo-EM experiments to amplify the signal-to-noise ratio, the reconstructed 3D protein-density maps are often limited in quality due to residual noise, which in turn affects the accuracy of the macromolecular representation. Here, crefDenoiser is introduced, a denoising neural network model designed to enhance the signal in 3D cryo-EM maps produced with standard processing pipelines. The crefDenoiser model is trained without the need for `clean' ground-truth target maps. Instead, a custom dataset is employed, composed of real noisy protein half-maps sourced from the Electron Microscopy Data Bank repository. Competing with the current state-of-the-art, crefDenoiser is designed to optimize for the theoretical noise-free map during self-supervised training. We demonstrate that our model successfully amplifies the signal across a wide variety of protein maps, outperforming a classic map denoiser and following a network-based sharpening model. Without biasing the map, the proposed denoising method leads to improved visibility of protein structural features, including protein domains, secondary structure elements and modest high-resolution feature restoration.

Ultrafast, high-intensity X-ray free-electron lasers can perform diffraction imaging of single protein molecules. Various algorithms have been developed to determine the orientation of each single-particle diffraction pattern and reconstruct the 3D diffraction intensity. Most of these algorithms rely on the premise that all diffraction patterns originate from identical protein molecules. However, in actual experiments, diffraction patterns from multiple different molecules may be collected simultaneously. Here, we propose a predicted model-aided one-step classification–multireconstruction algorithm that can handle mixed diffraction patterns from various molecules. The algorithm uses predicted structures of different protein molecules as templates to classify diffraction patterns based on correlation coefficients and determines orientations using a correlation maximization method. Tests on simulated data demonstrated high accuracy and efficiency in classification and reconstruction.

The observation of neutron interference using a triple Laue interferometer formed by two separate crystals opens the way to the construction and operation of skew-symmetric interferometers with extended arm separation and length. The specifications necessary for their successful operation are investigated here: most importantly, how the manufacturing tolerance and crystal alignments impact the interference visibility. In contrast with previous studies, both incoherent sources and the three-dimensional operation of the interferometer are considered. It is found that, with a Gaussian Schell model of an incoherent source, the integrated density of the particles leaving the interferometer is the same as that yielded by a coherent Gaussian source having a radius equal to the coherence length.

Low-energy electron diffraction patterns contain precise information about the structure of the surface studied. However, retrieving the real space lattice periodicity from complex diffraction patterns is challenging, especially when the modeled patterns originate from superlattices with large unit cells composed of several symmetry-equivalent domains without a simple relation to the substrate. This work presents ProLEED Studio software, built to provide simple, intuitive and precise modeling of low-energy electron diffraction patterns. The interactive graphical user interface allows real-time modeling of experimental diffraction patterns, change of depicted diffraction spot intensities, visualization of different diffraction domains, and manipulation of any lattice points or diffraction spots. The visualization of unit cells, lattice vectors, grids and scale bars as well as the possibility of exporting ready-to-publish models in bitmap and vector formats significantly simplifies the modeling process and publishing of results.

A systematic procedure is introduced for modeling charge-neutral non-polar surfaces of ionic minerals containing polyatomic anions. By integrating distance- and charge-based clustering to identify chemical species within the mineral bulk, our pipeline, PolyCleaver, renders a variety of theoretically viable surface terminations. As a demonstrative example, this approach was applied to forsterite (Mg2SiO4), unveiling a rich interface landscape based on interactions with formaldehyde, a relevant multifaceted molecule, and more particularly in prebiotic chemistry. This high-throughput method, going beyond techniques traditionally applied in the modeling of minerals, offers new insights into the potential catalytic properties of diverse surfaces, enabling a broader exploration of synthetic pathways in complex mineral systems.

Proteins are well known `shapeshifters' which change conformation to function. In crystallography, multiple conformational states are often present within the crystal and the resulting electron-density map. Yet, explicitly incorporating alternative states into models to disentangle multi-conformer ensembles is challenging. We previously reported the tool FLEXR, which, within a few minutes, automatically separates conformational signal from noise and builds the corresponding, often missing, structural features into a multi-conformer model. To make the method widely accessible for routine multi-conformer building as part of the computational toolkit for macromolecular crystallography, we present a graphical user interface (GUI) for FLEXR, designed as a plugin for Coot 1. The GUI implementation seamlessly connects FLEXR models with the existing suite of validation and modeling tools available in Coot. We envision that FLEXR will aid crystallographers by increasing access to a multi-conformer modeling method that will ultimately lead to a better representation of protein conformational heterogeneity in the Protein Data Bank. In turn, deeper insights into the protein conformational landscape may inform biology or provide new opportunities for ligand design. The code is open source and freely available on GitHub at https://github.com/TheFischerLab/FLEXR-GUI.

The strong metal–support interaction (SMSI) is a phenomenon observed in supported metal catalyst systems in which reducible metal oxide supports can form overlayers over the surface of active metal nanoparticles (NPs) under a hydrogen (H2) environment at elevated temperatures. SMSI has been shown to affect catalyst performance in many reactions by changing the type and number of active sites on the catalyst surface. Laboratory methods for the analysis of SMSI at the nanoparticle-ensemble level are lacking and mostly based on indirect evidence, such as gas chemisorption. Here, we demonstrate the possibility to detect and characterize SMSIs in Co/TiOx model catalysts using the laboratory X-ray standing wave (XSW) technique for a large ensemble of NPs at the bulk scale. We designed a thermally stable MoNx/SiNx periodic multilayer to retain XSW generation after reduction with H2 gas at 600°C. The model catalyst system was synthesized here by deposition of a thin TiOx layer on top of the periodic multilayer, followed by Co NP deposition via spare ablation. A partial encapsulation of Co NPs by TiOx was identified by analyzing the change in Ti atomic distribution. This novel methodological approach can be extended to observe surface restructuring of model catalysts in situ at high temperature (up to 1000°C) and pressure (≤3 mbar), and can also be relevant for fundamental studies in the thermal stability of membranes, as well as metallurgy.

A deep-learning algorithm is proposed for the inpainting of Bragg coherent diffraction imaging (BCDI) patterns affected by detector gaps. These regions of missing intensity can compromise the accuracy of reconstruction algorithms, inducing artefacts in the final result. It is thus desirable to restore the intensity in these regions in order to ensure more reliable reconstructions. The key aspect of the method lies in the choice of training the neural network with cropped sections of diffraction data and subsequently patching the predictions generated by the model along the gap, thus completing the full diffraction peak. This approach enables access to a greater amount of experimental data for training and offers the ability to average overlapping sections during patching. As a result, it produces robust and dependable predictions for experimental data arrays of any size. It is shown that the method is able to remove gap-induced artefacts on the reconstructed objects for both simulated and experimental data, which becomes essential in the case of high-resolution BCDI experiments.

Halima Aden attends the premiere of Netflix's Travis Scott: Look Mom I Can Fly at Barker Hangar on Aug. 27, 2019, in Santa Monica, Calif.; Credit: Rich Fury/Getty Images

For Halima Aden, the decision to walk away from a career as the world's first hijab-wearing supermodel was fairly clear cut. She's felt used for so long, she says — by the modeling industry and by UNICEF, the organization she was photographed by as a child in a refugee camp in Kenya and later served as an ambassador for.

Aden has been featured on the covers of Vogue, Elle and Allure magazines. And she walked the runway for Rihanna's Fenty Beauty and Kanye West's Yeezy.

She tells Morning Edition host Rachel Martin she wanted to be a role model for young girls while being true to herself, but she wasn't accomplishing either. Modeling, she realized, was in "direct conflict" with who she is.

"I'm not a cover girl, I'm Halima from Kakuma," she says. "I want to be the reason why girls have confidence within themselves, not the reason for their insecurity."

Aden was raised in the Kakuma refugee camp in northwestern Kenya. She and her family moved to Minnesota in 2004 when she was 7.

It was there her journey as a model began, competing for Miss Minnesota USA in 2016, seeking a scholarship. She finished in the semifinals, and says from there, modeling "fell from the sky" into her lap.

Interview Highlights

You saw [modeling] not just as a chance to wear gorgeous clothes and to have your photo in magazines but also as a way to help people.

Growing up in America, not seeing representation, not seeing anybody who dressed like me look like me, it did make me feel like, wow, what's wrong with me, you know? And I'm sure if I had if I would have had representation growing up, I would have been so much more confident to wear my hijab, to be myself, to be authentic. But to be that person, to grow up and be on the cover of magazines, I've covered everything from Vogue to Allure, some of the biggest publications in fashion. And yet I still couldn't relate personally to my own image because that's not who I really am. That's not how I really dress. That's not how my hijab really looks. And, you know, fashion, it can be a very creative field, and I completely appreciate that. But my hijab was just getting spread so thin that I knew I had to give it all away, give it up. I'm not a cover girl. I am Halima from Kakuma. I want to be the reason why girls have confidence within themselves, not the reason for their insecurity.

When you say your hijab was being kind of styled out of existence, what passed for a hijab as you were walking down those runways?

Everything. Oh, my goodness. I had jeans at one point on my head as a hijab. I had Gucci pants styled as a turban. It just didn't even make sense, and I felt so far removed from the image itself.

During the pandemic you decided to walk away from fashion and UNICEF. Was it a complicated decision?

I'll be honest with you, the feelings that I've had towards the fashion industry and UNICEF, it was just multiplying as the years went on, so it was just festering. You know, because the fashion industry is very known to use these young girls and boys while their young, age 14 to like 24, I think is the average career of a model. And then they just replace them and move on to a newer model. And same with UNICEF. They've been photographing me and using me since the time I was a baby in a refugee camp. I remember getting those headshots taken and it made me feel, it's very dehumanizing. And so I wanted to show UNICEF, too. How does it feel to be used? It's not a good feeling. And so let's stop using people.

What are you going to do [next]?

For me right now, I don't know what's next. And that's OK. That's OK, because I'm young and I have time to figure it out. And I'm grateful. I'm grateful to the people that I've met. I'm grateful to the agents that I worked with. I'm grateful for the experiences I was able to have these last four years. But at the same time, I just am also grateful that I don't have to do that anymore because it was in direct conflict with who I am as an individual, as a human being.

This content is from Southern California Public Radio. View the original story at SCPR.org.

Microsoft-owned OpenAI has announced the general availability of its latest text-generating model GPT-4, through its API.

A new report from the National Academies of Sciences, Engineering, and Medicine provides a blueprint and eight overarching strategies for improving health care for the approximately 100,000 people in the United States living with sickle cell disease (SCD).

New models for studying the human brain — human neural organoids, transplants, and chimeras — show promise for advancing understanding of the brain and laying the groundwork for new therapeutic approaches to brain diseases that have so far proved hard to treat, says a new report from the National Academies of Sciences, Engineering, and Medicine.

Meta announced the LLaMA in February this year in several sizes (7B, 13B, 33B, and 65B parameters) so it can be used by a range of users and companies. At I/O 2023, Google also talked about multiple LLMs that are suited to companies of different sizes.

Artificial intelligence (AI) based foundations models such as Meta's Llama 2 and OpenAI's GPT-4 are low on transparency, according to a global report.

Georgia-based HRS Heat Exchangers has been awarded the American 3-A Sanitary Standards approval for two of its key heat exchanger models for food and beverage use.

KPM Analytics has announced three new instrument configurations for its Unity Scientific SpectraStar product line.

According to the U.S. Energy Information Administration, more than half (51%) of the energy used in U.S. homes is directly spent on just two end uses, heating and air-conditioning. As such, producing a comfortable temperature within your living space creates one of the biggest carbon footprints of our modern living environment.

Plumbing and HVAC contractors can help alleviate financial worries by offering multiple financing options.

The Society’s membership model has been restructured to add key benefits while a new association management system is simplifying member engagements.

 In the age of customer-centric business models, it's easy to overlook the fundamental role of employees in driving business success. Here's one company's story utilizing a focused approach to enhance employee engagement.

As consumers’ purchasing behaviors continue to impact the U.S. on-premise, experts note that the channel remains resilient amid fluctuating trends.

New Hunting, Cargo, eMTB models on display June 8-11 in Denver

Taking Adventure Further: Upgrades Unveiled for the Fucare Scorpio

Canadian Classroom and Inventive Classroom Partner with Creality to Introduce Four New 3D Printing Products to the North American Market

The Sweet Spot, a beloved yoga and wellness studio known for its inclusivity and community spirit, is shaking things up with the launch of a unique "Pay What You Want" price model.

"Valley Wide All Stars little league is an incredible community of coaches, parents and kids who are passionate for baseball," said Frontino. "I am happy to support such a great organization in my community."

Matthew Muir lends years of expertise to his work with Jackson Contractor Group

F-Series E-bikes now available. Special Promotional price.

A Masterpiece of Performance and Craftsmanship

Boulder retained 94% of participants in long-term care with buprenorphine, over 3 times the national average: demonstrating the remarkable effectiveness of its telehealth-only care model for opioid addiction.

Magnetic cushions and armrests, bold colors and a range of licensed designs. Gaming and lifestyle chair brand WARP has unveiled its new flagship line of ergonomic chairs named «Xd»

Serving outstanding construction services in Louisville, KY with old-world principles of integrity and honesty.

A Niche Focus Offers Homeowners an Easy Solution to Opening Up Living Spaces

The Jerusalem International "Winner" Marathon was officially launched at a festive event in the presence of the Mayor of Jerusalem, Moshe Leon

Globalmanagergroup.com is happy to launches an updated documents kit for CMMI version 3.0.

Unlocking the Ideal Approach to Driver's Workspace Design

Standout features like Memosens digital connectivity set them apart

South Florida's Largest home expo is back in Miami, FL, October 21-23 at the Miami-Dade County Fair & Expo Center. Discover the latest interior and exterior design trends, products, and services to prepare your home for the holidays.

Brace yourself for a design and remodeling extravaganza like no other!

The Home Design and Remodeling Show: South Florida's Premier Event for Home Improvement and Design Returns to Fort Lauderdale with NEW Features & Special Guests.

The Home Design and Remodeling Show, South Florida's premier home improvement and design event, arrives in Palm Beach, bringing new features and special guests.

GL Homes is excited to announce the highly anticipated sale of it's cutting edge, contemporary model homes at Lotus Palm.

Among the high level of certifications – all the Company's detection products are TUV certified and without any radioactive source ensuring full safety and protection to the security screening personnel.

Initiative Includes Enhanced Staffing and Training, More Personalized Service, Broader Selection, And Amazing Discounts and Deals