The PtII atom in the title complex, [Pt(C15H18N4O4S)(C2H6OS)], exists within a square-planar NS2O donor set provided by the N, S, O atoms of the di-anionic tridentate thio­semicarbazo ligand and a dimethyl sulfoxide S atom. The two chelate rings are coplanar, subtending a dihedral angle of 1.51 (7)°. The maximum deviation from an ideal square-planar geometry is seen in the five-membered chelate ring with an S—Pt—S bite angle of 96.45 (2)°. In the crystal, mol­ecules are linked via N—H⋯O, C—H⋯O, C—H⋯N and C—H⋯π inter­actions into two-dimensional networks lying parallel to the ab plane. The conformations of related cyclo­hexyl­hydrazine-1-carbo­thio­amide ligands are compared to that of the title compound.

In the title inorganic mol­ecular salt, (N2H5)2SiF6, the silicon atom at the centre of the slightly distorted SiF6 octa­hedron [range of Si—F distances = 1.6777 (4)–1.7101 (4) Å] lies on a crystallographic inversion centre. In the crystal, the ions are connected by N—H⋯N and N—H⋯F hydrogen bonds; the former link the cations into [010] chains and the latter (some of which are bifurcated or trifurcated) link the ions into a three-dimensional network. The two-dimensional fingerprint plots show that F⋯H/H⋯F inter­actions dominate the Hirshfeld surface (75.5%) followed by H⋯H (13.6%) and N⋯H/H⋯N (8.4%) whereas F⋯F (1.9%) and F⋯N/N⋯F (0.6%) have negligible percentages. The title compound is isostructural with its germanium-containing analogue.

The structures of three compounds of 3-chloro-2-nitro­benzoic acid with 5-nitro­quinoline, (I), 6-nitro­quinoline, (II), and 8-hy­droxy­quinoline, (III), have been determined at 190 K. In each of the two isomeric compounds, (I) and (II), C7H4ClNO4·C9H6N2O2, the acid and base mol­ecules are held together by O—H⋯N and C—H⋯O hydrogen bonds. In compound (III), C9H8NO+·C7H3ClNO4−, an acid–base inter­action involving H-atom transfer occurs and the H atom is located at the N site of the base mol­ecule. In the crystal of (I), the hydrogen-bonded acid–base units are linked by C—H⋯O hydrogen bonds, forming a tape structure along the b-axis direction. Adjacent tapes, which are related by a twofold rotation axis, are linked by a third C—H⋯O hydrogen bond, forming wide ribbons parallel to the (overline{1}03) plane. These ribbons are stacked via π–π inter­actions between the quinoline ring systems [centroid–centroid distances = 3.4935 (5)–3.7721 (6) Å], forming layers parallel to the ab plane. In the crystal of (II), the hydrogen-bonded acid–base units are also linked into a tape structure along the b-axis direction via C—H⋯O hydrogen bonds. Inversion-related tapes are linked by further C—H⋯O hydrogen bonds to form wide ribbons parallel to the (overline{3}08) plane. The ribbons are linked by weak π–π inter­actions [centroid–centroid distances = 3.8016 (8)–3.9247 (9) Å], forming a three-dimensional structure. In the crystal of (III), the cations and the anions are alternately linked via N—H⋯O and O—H⋯O hydrogen bonds, forming a 21 helix running along the b-axis direction. The cations and the anions are further stacked alternately in columns along the a-axis direction via π–π inter­actions [centroid–centroid distances = 3.8016 (8)–3.9247 (9) Å], and the mol­ecular chains are linked into layers parallel to the ab plane through these inter­actions.

The title compound, C18H18F2N2O3, crystallizes with two independent mol­ecules (A and B) in the asymmetric unit. They differ essentially in the orientation of the pyridine ring with respect to the benzene ring; these two rings are inclined to each other by 53.3 (2)° in mol­ecule A and by 72.9 (2)° in mol­ecule B. The 3-(cyclo­propyl­meth­oxy) side chain has an extended conformation in both mol­ecules. The two mol­ecules are linked by a pair of C—H⋯O hydrogen bonds and two C—H⋯π inter­actions, forming an A–B unit. In the crystal, this unit is linked by N—H⋯O hydrogen bonds, forming a zigzag –A–B–A–B– chain along [001]. The chains are linked by C—H⋯N and C—H⋯F hydrogen bonds to form layers parallel to the ac plane. Finally, the layers are linked by a third C—H⋯π inter­action, forming a three-dimensional structure. The major contributions to the Hirshfeld surface are those due to H⋯H contacts (39.7%), followed by F⋯H/H⋯F contacts (19.2%).

The title compounds, 6-(naphthalen-1-yl)-6a-nitro-6,6a,6 b,7,9,11a-hexa­hydro­spiro­[chromeno[3',4':3,4]pyrrolo­[1,2-c]thia­zole-11,11'-indeno­[1,2-b]quinoxaline], C37H26N4O3S, (I), and 6'-(naphthalen-1-yl)-6a'-nitro-6',6a',6b',7',8',9',10',12a'-octa­hydro-2H-spiro­[ace­naphthyl­ene-1,12'-chromeno[3,4-a]indolizin]-2-one, C36H28N2O4, (II), are new spiro derivatives, in which both the pyrrolidine rings adopt twisted conformations. In (I), the five-membered thia­zole ring adopts an envelope conformation, while the eight-membered pyrrolidine-thia­zole ring adopts a boat conformation. An intra­molecular C—H⋯N hydrogen bond occurs, involving a C atom of the pyran ring and an N atom of the pyrazine ring. In (II), the six-membered piperidine ring adopts a chair conformation. An intra­molecular C—H⋯O hydrogen bond occurs, involving a C atom of the pyrrolidine ring and the keto O atom. For both compounds, the crystal structure is stabilized by inter­molecular C—H⋯O hydrogen bonds. In (I), the C—H⋯O hydrogen bonds link adjacent mol­ecules, forming R22(16) loops propagating along the b-axis direction, while in (II) they form zigzag chains along the b-axis direction. In both compounds, C—H⋯π inter­actions help to consolidate the structure, but no significant π–π inter­actions with centroid–centroid distances of less than 4 Å are observed.

The syntheses and crystal structures of three cyclo­triphosphazenes, all with fluorinated ar­yloxy side groups that generate different steric characteristics, viz. hexa­kis­(penta­fluoro­phen­oxy)cyclo­triphosphazene, N3P3(OC6F5)6, 1, hexa­kis­[4-(tri­fluoro­methyl)­phen­oxy]cyclo­triphosphazene, N3P3[OC6H4(CF3)]6, 2 and hexa­kis­[3,5-bis(­tri­fluoro­methyl)­phen­oxy]cyclo­triphosphazene, N3P3[OC6H3(CF3)2]6 3, are reported. Specifically, each phospho­rus atom bears either two penta­fluoro­phen­oxy, 4-tri­fluoro­methyl­phen­oxy, or 3,5-tri­fluoro­methyl­phen­oxy groups. The central six-membered phosphazene rings display envelope pucker conformations in each case, albeit to varying degrees. The maximum displacement of the `flap atom' from the plane through the other ring atoms [0.308 (5) Å] is seen in 1, in a mol­ecule that is devoid of hydrogen atoms and which exhibits a `wind-swept' look with all the aromatic rings displaced in the same direction. In 3 an intra­molecular C—H(aromatic)⋯F inter­action is observed. All the –CF3 groups in 2 and 3 exhibit positional disorder over two rotated orientations in close to statistical ratios. The extended structures of 2 and 3 are consolidated by C—H⋯F inter­actions of two kinds: (a) linear chains, and (b) cyclic between mol­ecules related by inversion centers. In both 1 and 3, one of the six substituted phenyl rings has a parallel-displaced aromatic π–π stacking inter­action with its respective symmetry mate with slippage values of 2.2 Å in 1 and 1.0 Å in 3. None of the structures reported here have solvent voids that could lead to clathrate formation.

Amino­pyridine and phthalic acid are well known synthons for supra­molecular architectures for the synthesis of new materials for optical applications. The 2-amino­pyridinium hydrogen phthalate title salt, C5H7N2+·C8H5O4−, crystallizes in the non-centrosymmetric space group P21. The nitro­gen atom of the –NH2 group in the cation deviates from the fitted pyridine plane by 0.035 (7) Å. The plane of the pyridinium ring and phenyl ring of the anion are oriented at an angle of 80.5 (3)° to each other in the asymmetric unit. The anion features a strong intra­molecular O—H⋯O hydrogen bond, forming a self-associated S(7) ring motif. The crystal packing is dominated by inter­molecular N—H⋯O hydrogen bonds leading to the formation of 21 helices, with a C(11) chain motif. They propagate along the b axis and enclose R22(8) ring motifs. The helices are linked by C—H⋯O hydrogen bonds, forming layers parallel to the ab plane. Hirshfeld surface analysis and two-dimensional fingerprint plots were used to investigate and qu­antify the inter­molecular inter­actions in the crystal.

The title mol­ecular salt, (C7H11N2)2[Hg2Cl6], crystallizes with two 4-(di­methyl­amino)­pyridinium cations (A and B) and two half hexa­chlorido­dimercurate(II) anions in the asymmetric unit. The organic cations exhibit essentially the same features with an almost planar pyridyl ring (r.m.s. deviations of 0.0028 and 0.0109 Å), which forms an inclined dihedral angle with the dimethyamino group [3.06 (1) and 1.61 (1)°, respectively]. The di­methyl­amino groups in the two cations are planar, and the C—N bond lengths are shorter than that in 4-(di­methyl­amino)­pyridine. In the crystal, mixed cation–anion layers lying parallel to the (010) plane are formed through N—H⋯Cl hydrogen bonds and adjacent layers are linked by C—H⋯Cl hydrogen bonds, forming a three-dimensional network. The analyses of the calculated Hirshfeld surfaces confirm the relevance of the above inter­molecular inter­actions, but also serve to further differentiate the weaker inter­molecular inter­actions formed by the organic cations and inorganic anions, such as π–π and Cl⋯Cl inter­actions. The powder XRD data confirms the phase purity of the crystalline sample. Furthermore, the vibrational absorption bands were identified by IR spectroscopy and the optical properties were studied by using optical UV–visible absorption spectroscopy.

The title compound, [Fe(CF3SO3)2(C4H8O)4], is octa­hedral with two tri­fluoro­methane­sulfonate ligands in trans positions and four tetra­hydro­furane mol­ecules in the equatorial plane. By the conformation of the ligands the complex is chiral in the crystal packing. The compound crystallizes in the Sohncke space group P212121 and is enanti­omerically pure. The packing of the mol­ecules is determined by weak C—H⋯O hydrogen bonds. The crystal studied was refined as a two-component inversion twin.

Benzo[1,2-c:3,4-c':5,6-c'']tri­thio­phene (D3h-BTT) is an easily prepared electron donor that readily forms charge–transfer complexes with organic acceptors. We report here two crystal structures of its charge–transfer complexes with 7,7,8,8-tetra­cyano­quinodi­methane (TCNQ) and buckminsterfullerene (C60). The D3h-BTT·TCNQ complex, C12H6S3·C12H4N4, crystallizes with mixed layers of donors and acceptors, with an estimated degree of charge transfer at 0.09 e. In the D3h-BTT·C60·toluene complex, C12H6S3·C60·C7H8, the central ring of BTT is `squeezed' by the C60 mol­ecules from both faces. However, the degree of charge transfer is low. The C60 unit is disordered over two sites in a 0.766 (3):0.234 (3) ratio and was refined as a two-component inversion twin.

In the title compounds, C16H9Cl2N2O2·C4H8O2 and C16H9Cl2N2O2, the bicyclic 4H-chromene cores are nearly planar with maximum deviations of 0.081 (2) and 0.087 (2) Å. In both structures, the chromene derivative mol­ecules are linked into centrosymmetric dimers by pairs of N—H⋯O hydrogen bonds, forming R22(16) motifs. These dimers are further linked in the 3,4-di­chloro­phenyl derivative by N—H⋯N hydrogen bonds into double layers parallel to (100) and in the 2,6-di­chloro­phenyl derivative by O—H⋯N hydrogen bonds into ribbons along the [1overline{1}0] direction. In the 3,4-di­chloro­phenyl derivative, the 1,4-dioxane solvent mol­ecules are connected to the chromene mol­ecules via O—H⋯O hydrogen bonds.

The title imidazo[1,2-a] pyridine derivative, C13H8Br2N2, was synthesized via a single-step reaction method. The title mol­ecule is planar, showing a dihedral angle of 0.62 (17)° between the phenyl and the imidazo[1,2-a] pyridine rings. An intra­molecular C—H⋯N hydrogen bond with an S(5) ring motif is present. In the crystal, a short H⋯H contact links adjacent mol­ecules into inversion-related dimers. The dimers are linked in turn by weak C—H⋯π and slipped π–π stacking inter­actions, forming layers parallel to (110). The layers are connected into a three-dimensional network by short Br⋯H contacts. Two-dimensional fingerprint plots and three-dimensional Hirshfeld surface analysis of the inter­molecular contacts reveal that the most important contributions for the crystal packing are from H⋯Br/Br⋯H (26.1%), H⋯H (21.7%), H⋯C/C⋯H (21.3%) and C⋯C (6.5%) inter­actions. Energy framework calculations suggest that the contacts formed between mol­ecules are largely dispersive in nature. Analysis of HOMO–LUMO energies from a DFT calculation reveals the pure π character of the aromatic rings with the highest electron density on the phenyl ring, and σ character of the electron density on the Br atoms. The HOMO–LUMO gap was found to be 4.343 eV.

In the title hydrazinecarbodi­thio­ate derivative, C27H26N2O2S2, the asymmetric unit is comprised of four mol­ecules (Z = 8 and Z' = 4). The 4-meth­oxy­phenyl rings are slightly twisted away from their attached olefinic double bonds [torsion angles = 5.9 (4)–19.6 (4)°]. The azomethine double bond has an s-trans configuration relative to one of the C=C bonds and an s-cis configuration relative to the other [C=C—C= N = 147.4 (6)–175.7 (2) and 15.3 (3)–37.4 (7)°, respectively]. The torsion angles between the azomethine C=N double bond and hydrazine-1-carbodi­thio­ate moiety indicate only small deviations from planarity, with torsion angles ranging from 0.9 (3) to 6.9 (3)° and from 174.9 (3) to 179.7 (2)°, respectively. The benzyl ring and the methyl­enesulfanyl moiety are almost perpendicular to each other, as indicated by their torsion angles [range 93.7 (3)–114.6 (2)°]. In the crystal, mol­ecules are linked by C—H⋯O, N—H⋯S and C—H⋯π(ring) hydrogen-bonding inter­actions into a three-dimensional network. Structural details of related benzyl hydrazine-1-carbodi­thio­ate are surveyed and compared with those of the title compound.

The benzo­pyran ring of the title com­pound, C16H11ClN2O2, is planar [maximum deviation = 0.079 (2) Å] and is almost perpendicular to the chloro­phenyl ring [dihedral angle = 86.85 (6)°]. In the crystal, N—H⋯O, O—H⋯N, C—H⋯O and C—H⋯Cl hydrogen bonds form inter- and intra­molecular inter­actions. The DFT/B3LYP/6-311G(d,p) method was used to determine the HOMO–LUMO energy levels. The mol­ecular electrostatic potential surfaces were investigated by Hirshfeld surface analysis and two-dimensional fingerprint plots were used to analyse the inter­molecular inter­actions in the mol­ecule.

The title compound, C22H15Cl2NOS, contains 1,4-benzo­thia­zine and 2,4-di­­chloro­benzyl­idene units, where the di­hydro­thia­zine ring adopts a screw-boat conformation. In the crystal, inter­molecular C—HBnz⋯OThz (Bnz = benzene and Thz = thia­zine) hydrogen bonds form corrugated chains extending along the b-axis direction which are connected into layers parallel to the bc plane by inter­molecular C—HMethy⋯SThz (Methy = methyl­ene) hydrogen bonds, en­closing R44(22) ring motifs. Offset π-stacking inter­actions between 2,4-di­­chloro­phenyl rings [centroid–centroid = 3.7701 (8) Å] and π-inter­actions which are associated by C—HBnz⋯π(ring) and C—HDchlphy⋯π(ring) (Dchlphy = 2,4-di­chloro­phen­yl) inter­actions may be effective in the stabilization of the crystal structure. The Hirshfeld surface analysis of the crystal structure indicates that the most important contributions for the crystal packing are from H⋯H (29.1%), H⋯C/C⋯H (27.5%), H⋯Cl/Cl⋯H (20.6%) and O⋯H/H⋯O (7.0%) inter­actions. Hydrogen-bonding and van der Waals inter­actions are the dominant inter­actions in the crystal packing. Computational chemistry indicates that in the crystal, the C—HBnz⋯OThz and C—HMethy⋯SThz hydrogen-bond energies are 55.0 and 27.1 kJ mol−1, respectively. Density functional theory (DFT) optimized structures at the B3LYP/6-311G(d,p) level are compared with the experimentally determined mol­ecular structure in the solid state. The HOMO–LUMO behaviour was elucidated to determine the energy gap.

The reactions of N-heterocyclic carbene CuI and AgI halides with potassium thio- or seleno­cyanate gave unexpected products. The attempted substitution reaction of bromido­(1,3-dibenzyl-4,5-di­phenyl­imidazol-2-yl­idene)silver (NHC*—Ag—Br) with KSCN yielded bis­[bis­(1,3-dibenzyl-4,5-di­phenyl­imidazol-2-yl­idene)silver(I)] tris­(thio­cyanato)­argentate(I) diethyl ether disolvate, [Ag(C29H24N2)2][Ag(NCS)3]·2C4H10O or [NHC*2Ag]2[Ag(SCN)3]·2Et2O, (1), while reaction with KSeCN led to bis­(μ-1,3-dibenzyl-4,5-diphenyl-2-seleno­imidazole-κ2Se:Se)bis­[bromido­(1,3-dibenzyl-4,5-diphenyl-2-seleno­imid­azole-κSe)silver(I)] di­chloro­methane hexa­solvate, [Ag2Br2(C29H24N2Se)4]·6CH2Cl2 or (NHC*Se)4Ag2Br2·6CH2Cl2, (2), via oxidation of the NHC* fragment to 2-seleno­imidazole. This oxidation was observed again in the reaction of NHC*—Cu—Br with KSeCN, yielding catena-poly[[[(1,3-dibenzyl-4,5-diphenyl-2-seleno­imidazole-κSe)copper(I)]-μ-cyanido-κ2C:N] aceto­nitrile monosolvate], {[Cu(CN)(C29H24N2Se)]·C2H3N}n or NHC*Se—CuCN·CH3CN, (3). Compound (1) represents an organic/inorganic salt with AgI in a linear coordination in each of the two cations and in a trigonal coordination in the anion, accompanied by diethyl ether solvent mol­ecules. The tri-blade boomerang-shaped complex anion [Ag(SCN)3]2− present in (1) is characterized by X-ray diffraction for the first time. Compound (2) comprises an isolated centrosymmetric mol­ecule with AgI in a distorted tetra­hedral BrSe3 coordination, together with di­chloro­methane solvent mol­ecules. Compound (3) exhibits a linear polymeric 1∞[Cu—C≡N—Cu—] chain structure with a seleno­imidazole moiety additionally coordinating to each CuI atom, and completed by aceto­nitrile solvent mol­ecules. Electron densities associated with an additional ether solvent mol­ecule in (1) and two additional di­chloro­methane solvent mol­ecules in (2) were removed with the SQUEEZE procedure [Spek (2015). Acta Cryst. C71, 9–18] in PLATON.

The asymmetric units of the title compounds both contain one nonplanar mol­ecule. In 4-benzyl-6-phenyl-4,5-di­hydro­pyridazin-3(2H)-one, C17H14N2O, (I), the phenyl and pyridazine rings are twisted with respect to each other, making a dihedral angle of 46.69 (9)°; the phenyl ring of the benzyl group is nearly perpendicular to the plane of the pyridazine ring, the dihedral angle being 78.31 (10)°. In methyl 2-[5-(2,6-di­chloro­benz­yl)-6-oxo-3-phenyl-1,4,5,6-tetra­hydropyridazin-1-yl]acetate, C20H16Cl2N2O3, (II), the phenyl and pyridazine rings are twisted with respect to each other, making a dihedral angle of 21.76 (18)°, whereas the phenyl ring of the di­chloro­benzyl group is inclined to the pyridazine ring by 79.61 (19)°. In the crystal structure of (I), pairs of N—H⋯O hydrogen bonds link the mol­ecules into inversion dimers with an R22(8) ring motif. In the crystal structure of (II), C—H⋯O hydrogen bonds generate dimers with R12(7), R22(16) and R22(18) ring motifs. The Hirshfeld surface analyses of compound (I) suggests that the most significant contributions to the crystal packing are by H⋯H (48.2%), C⋯H/H⋯C (29.9%) and O⋯H/H⋯O (8.9%) contacts. For compound (II), H⋯H (34.4%), C⋯H/H⋯C (21.3%) and O⋯H/H⋯O (16.5%) inter­actions are the most important contributions.

In the crystal structure of the title com­pound, [Ni(NCS)2(CH3CN)2(C12H9NO)2] or Ni(NCS)2(4-benzoyl­pyridine)2(aceto­nitrile)2, the NiII ions are octa­hedrally coordinated by the N atoms of two thio­cyanate anions, two 4-benzoyl­pyridine ligands and two aceto­nitrile mol­ecules into discrete com­plexes that are located on centres of inversion. In the crystal, the discrete com­plexes are linked by centrosymmetric pairs of weak C—H⋯S hydrogen bonds into chains. Thermogravimetric measurements prove that, upon heating, the title com­plex loses the two aceto­nitrile ligands and transforms into a new crystalline modification of the chain com­pound [Ni(NCS)2(4-benzoyl­pyridine)2], which is different from that of the corresponding CoII, NiII and CdII coordination polymers reported in the literature. IR spectroscopic investigations indicate the presence of bridging thio­cyanate anions but the powder pattern cannot be indexed and, therefore, this structure is unknown.

The asymmetric unit of the title com­pound, catena-poly[[[(perchlorato-κO)copper(II)]-μ-3-(3-carb­oxy­prop­yl)-1,5,8,12-tetra­aza-3-azonia­cyclo­tetra­decane-κ4N1,N5,N8,N12] bis­(per­chlorate)], {[Cu(C13H30N5O2)(ClO4)](ClO4)2}n, (I), consists of a macrocyclic cation, one coordinated per­chlorate anion and two per­chlorate ions as counter-anions. The metal ion is coordinated in a tetra­gonally distorted octa­hedral geometry by the four secondary N atoms of the macrocyclic ligand, the mutually trans O atoms of the per­chlorate anion and the carbonyl O atom of the protonated carb­oxy­lic acid group of a neighbouring cation. The average equatorial Cu—N bond lengths [2.01 (6) Å] are significantly shorter than the axial Cu—O bond lengths [2.379 (8) Å for carboxyl­ate and average 2.62 (7) Å for disordered per­chlorate]. The coordinated macrocyclic ligand in (I) adopts the most energetically favourable trans-III conformation with an equatorial orientation of the substituent at the protonated distal 3-position N atom in a six-membered chelate ring. The coordination of the carb­oxy­lic acid group of the cation to a neighbouring com­plex unit results in the formation of infinite chains running along the b-axis direction, which are cross­linked by N—H⋯O hydrogen bonds between the secondary amine groups of the macrocycle and O atoms of the per­chlorate counter-anions to form sheets lying parallel to the (001) plane. Additionally, the extended structure of (I) is consolidated by numerous intra- and interchain C—H⋯O contacts.

In the title 1:1 cocrystal, C7H4ClNO4·C6H6N2O, nicotinamide (NIC) and 2-chloro-5-nitro­benzoic acid (CNBA) cocrystallize with one mol­ecule each of NIC and CNBA in the asymmetric unit. In this structure, CNBA and NIC form hydrogen bonds through O—H⋯N, N—H⋯O and C—H⋯O inter­actions along with N—H⋯O dimer hydrogen bonds of NIC. Further additional weak π–π inter­actions stabilize the mol­ecular assembly of this cocrystal.

The structures of two isomeric com­pounds of 5-nitro­quinoline with chloro- and nitro-substituted benzoic acid, namely, 2-chloro-4-nitro­benzoic acid–5-nitro­quinoline (1/1), (I), and 5-chloro-2-nitro­benzoic acid–5-nitro­quinoline (1/1), (II), both C7H4ClNO4·C9H6N2O2, have been determined at 190 K. In each com­pound, the acid and base mol­ecules are held together by an O—H⋯N hydrogen bond. In the crystal of (I), the hydrogen-bonded acid–base units are linked by a C—H⋯O hydrogen bond, forming a tape structure along [1overline{2}0]. The tapes are stacked into a layer parallel to the ab plane via N—O⋯π inter­actions between the nitro group of the base mol­ecule and the quinoline ring system. The layers are further linked by other C—H⋯O hydrogen bonds, forming a three-dimensional network. In the crystal of (II), the hydrogen-bonded acid–base units are linked into a wide ribbon structure running along [1overline{1}0] via C—H⋯O hydrogen bonds. The ribbons are further linked via another C—H⋯O hydrogen bond, forming a layer parallel to (110). Weak π–π inter­actions [centroid–centroid distances of 3.7080 (10) and 3.7543 (9) Å] are observed between the quinoline ring systems of adjacent layers. Hirshfeld surfaces for the 5-nitro­quinoline mol­ecules of the two com­pounds mapped over shape index and dnorm were generated to visualize the weak inter­molecular inter­actions.

A 1:1 epimeric mixture of 3-[(4-nitro­benzyl­idene)amino]-2(R,S)-(4-nitro­phen­yl)-5(S)-(propan-2-yl)imidazolidin-4-one, C19H19N5O5, was isolated from a reaction mixture of 2(S)-amino-3-methyl-1-oxo­butane­hydrazine and 4-nitro­benz­alde­hyde in ethanol. The product was derived from an initial reaction of 2(S)-amino-3-methyl-1-oxo­butane­hydrazine at its hydrazine group to provide a 4-nitro­benzyl­idene derivative, followed by a cyclization reaction with another mol­ecule of 4-nitro­benzaldehyde to form the chiral five-membered imidazolidin-4-one ring. The formation of the five-membered imidazolidin-4-one ring occurred with retention of the configuration at the 5-position, but with racemization at the 2-position. In the crystal, N—H⋯O(nitro) hydrogen bonds, weak C—H⋯O(carbon­yl) and C—H⋯O(nitro) hydrogen bonds, as well as C—H⋯π, N—H⋯π and π–π inter­actions, are present. These combine to generate a three-dimensional array. Hirshfeld surface analysis and PIXEL calculations are also reported.

The title com­pound, C15H11NO5, is relatively planar, with the planes of the two aromatic rings being inclined to each other by 3.09 (5)°. In the crystal, mol­ecules are linked by a pair of C—H⋯O hydrogen bonds, forming inversion dimers, which enclose an R22(16) ring motif. The dimers are linked by a further pair of C—H⋯O hydrogen-bonds forming ribbons enclosing R44(26) ring motifs. The ribbons are linked by offset π–π inter­actions [centroid–centroid distances = 3.6754 (6)–3.7519 (6) Å] to form layers parallel to the ac plane. Through Hirshfeld surface analyses, the dnorm surfaces, electrostatic potential and two-dimensional fingerprint (FP) plots were examined to verify the contributions of the different inter­molecular contacts within the supra­molecular structure. The shape-index surface shows that two sides of the mol­ecule are involved with the same contacts in neighbouring mol­ecules, and the curvedness plot shows flat surface patches that are characteristic of planar stacking.

In the title com­pound, C30H20Cl2O2Se, the C—Se—C angle is 99.0 (2)°, with the dihedral angle between the planes of the attached benzene rings being 79.1 (3)°. The average endocyclic angles (Se—C—C) facing the Se atom are 122.1 (5) and 122.2 (5)°. The Se atom is essentially coplanar with the attached benzene rings, deviating by 0.075 (1) and 0.091 (1) Å. In the two phenyl­ene(4-chloro­phen­yl)prop-2-en-1-one units, the benzene rings are inclined to each other by 44.6 (3) and 7.8 (3)°. In the crystal, the mol­ecules stack up the a axis, forming layers parallel to the ac plane. There are no significant classical inter­molecular inter­actions present. Hirshfeld surface analysis, two-dimensional fingerprint plots and the mol­ecular electrostatic potential surface were used to analyse the crystal packing. The Hirshfeld surface analysis suggests that the most significant contributions to the crystal packing are by C⋯H/H⋯C contacts (17.7%).

In the title com­pound, C13H14N2O3, the dihydropyridazine ring (r.m.s. deviation = 0.166 Å) has a screw-boat conformation. The dihedral angle between its mean plane and the benzene ring is 0.77 (12)°. In the crystal, inter­molecular O—H⋯O hydrogen bonds generate C(5) chains and N—H⋯O hydrogen bonds produce R22(8) motifs. These types of inter­actions lead to the formation of layers parallel to (12overline{1}). The three-dimensional network is achieved by C—H⋯O inter­actions, including R24(8) motifs. Inter­molecular inter­actions were additionally investigated using Hirshfeld surface analysis and two-dimensional fingerprint plots. The most significant contributions to the crystal packing are by H⋯H (43.3%), H⋯C/C⋯H (19.3%), H⋯O/H⋯O (22.6%), C⋯N/N⋯C (3.0%) and H⋯N/N⋯H (5.8%) contacts. C—H⋯π inter­actions and aromatic π–π stacking inter­actions are not observed.

Two thio­chromene com­pounds containing Br and F atoms, namely 2-(2-bromo-5-fluoro­phen­yl)-8-eth­oxy-3-nitro-2H-thio­chromene (C17H13BrFNO3S, A) and 2-(2-bromo-5-fluoro­phen­yl)-7-meth­oxy-3-nitro-2H-thio­chromene (C16H11BrFNO3S, B), were prepared via the condensation reaction between 2-mer­capto­benzaldehyde and nitro­styrene derivatives. In both com­pounds, the thio­chromene plane is almost perpendicular to the phenyl ring. In the structure of A, mol­ecules are assembled via π–π stacking and C—H⋯O and C—F⋯π inter­actions. In the crystal packing of B, mol­ecules are linked by C—H⋯F, C—H⋯O, C—H⋯π and π–π inter­actions.

The title com­pound, C24H24N2O6, consists of ethyl 2-(1,2,3,4-tetra­hydro-2-oxo­quinolin-1-yl)acetate and 4-[(2-eth­oxy-2-oxoeth­yl)(phen­yl)carbomoyl] units, where the oxo­quinoline unit is almost planar and the acetate substituent is nearly perpendicular to its mean plane. In the crystal, C—HOxqn⋯OEthx and C—HPh­yl⋯OCarbx (Oxqn = oxoquinolin, Ethx = eth­oxy, Phyl = phenyl and Carbx = carboxyl­ate) weak hydrogen bonds link the mol­ecules into a three-dimensional network sturucture. A π–π inter­action between the constituent rings of the oxo­quinoline unit, with a centroid–centroid distance of 3.675 (1) Å may further stabilize the structure. Both terminal ethyl groups are disordered over two sets of sites. The ratios of the refined occupanies are 0.821 (8):0.179 (8) and 0.651 (18):0.349 (18). The Hirshfeld surface analysis of the crystal structure indicates that the most important contributions for the crystal packing are from H⋯H (53.9%), H⋯O/O⋯H (28.5%) and H⋯C/C⋯H (11.8%) inter­actions. Weak inter­molecular hydrogen-bond inter­actions and van der Waals inter­actions are the dominant inter­actions in the crystal packing. Density functional theory (DFT) geometric optimized structures at the B3LYP/6-311G(d,p) level are com­pared with the experimentally determined mol­ecular structure in the solid state. The HOMO–LUMO mol­ecular orbital behaviour was elucidated to determine the energy gap.

2-(4-Nitro­phen­yl)-2-oxoethyl picolinate, C14H10N2O5, was synthesized under mild conditions. The chemical and mol­ecular structures were confirmed by single-crystal X-ray diffraction analysis. The mol­ecules are linked by inversion into centrosymmetric dimers via weak inter­molecular C—H⋯O inter­actions, forming R22(10) ring motifs, and further strengthened by weak π–π inter­actions. Hirshfeld surface analyses, the dnorm surfaces, electrostatic potential and two-dimensional fingerprint (FP) plots were used to verify the contributions of the different inter­molecular inter­actions within the supra­molecular structure. The shape-index surface shows that two sides of the mol­ecules are involved with the same contacts in neighbouring mol­ecules and curvedness plots show flat surface patches that are characteristic of planar stacking.

In the title com­plex, [Cu(C18H12F6N2O4)]·0.5C6H6O2, the CuII ion has a square-planar coordination geometry, being ligated by two N and two O atoms of the tetra­dentate open-chain Schiff base ligand 6,6'-{(1E,1'E)-[ethane-1,2-diylbis(aza­nylyl­idene)]bis­(methanylyl­idene)}bis­[2-(tri­fluoro­meth­oxy)phenol]. The crystal packing is stabilized by intra­molecular O—H⋯O and inter­molecular C—H⋯F, C—H⋯O and C—H⋯π hydrogen bonds. In addition, weak π–π inter­actions form a three-dimensional structure. Hirshfeld surface analysis and two-dimensional fingerprint plots were performed and created to analyze the inter­molecular inter­actions present in the crystal, indicating that the most important contributions for the crystal packing are from F⋯H/H⋯F (25.7%), H⋯H (23.5%) and C⋯H/H⋯C (12.6%) inter­actions.

The title compound, C15H10ClNO5, is relatively planar with the two aromatic rings being inclined to each other by 3.56 (11)°. The central —C(=O)—C–O—C(=O)— bridge is slightly twisted, with a C—C—O—C torsion angle of 164.95 (16)°. In the crystal, mol­ecules are linked by C—H⋯O and C—H⋯Cl hydrogen bonds, forming layers parallel to the (101) plane. The layers are linked by a further C—H⋯O hydrogen bond, forming a three-dimensional supra­molecular structure. There are a number of offset π–π inter­actions present between the layers [inter­centroid distances vary from 3.8264 (15) to 3.9775 (14) Å]. Hirshfeld surface analyses, the dnorm surfaces, electrostatic potential and two-dimensional fingerprint plots were examined to verify the contributions of the different inter­molecular contacts within the supra­molecular structure. The shape-index surface shows that two sides of the mol­ecule are involved in the same contacts with neighbouring mol­ecules, and the curvedness plot shows flat surface patches that are characteristic of planar stacking.

Highly Brønsted-acidic boron trifluoride monohydrate, a widely used `super acid-catalyst', is a colourless fuming liquid that releases BF3 at room temperature. Com­pared to the liquid com­ponents, i.e. boron trifluoride monohydrate and 1,4-dioxane, their 1:1 adduct, BF3H2O·C4H8O2, is a solid with pronounced thermal stability (m.p. 401–403 K). The crystal structure of the long-time-stable easy-to-handle and weighable com­pound is reported along with new preparative aspects and the results of 1H, 11B, 13C and 19F spectroscopic investigations, particularly documenting its high Brønsted acidity in aceto­nitrile solution. The remarkable stability of solid BF3H2O·C4H8O2 is attributed to the chain structure established by O—H⋯O hydrogen bonds of exceptional strength {O2⋯H1—O1 [O⋯O = 2.534 (3) Å] and O1—H1⋯O3i [2.539 (3) Å] in the concatenating unit >O2⋯H1—O1—H2⋯O3i<}, taking into account the mol­ecular (non-ionic) character of the structural moieties. Indirectly, this structural feature documents the outstanding acidification of the H2O mol­ecule bound to BF3 and reflects the super acid nature of BF3H2O. In detail, the C22(7) zigzag chain system of hydrogen bonding in the title structure is characterized by the double hydrogen-bond donor and double (κO,κO') hydrogen-bond acceptor functionality of the aqua ligand and dioxane molecule, respectively, the almost equal strength of both hydrogen bonds, the approximatety linear arrangement of the dioxane O atoms and the two neighbouring water O atoms. Furthermore, the approximately planar arrangement of B, F and O atoms in sheets perpendicular to the c axis of the ortho­rhom­bic unit cell is a characteristic structural feature.

In the crystal structure of the title compound, (C5H6N)[Cr(NCS)4(C5H5N)2]·C5H5N, the CrIII ions are octa­hedrally coordinated by four N-bonding thio­cyanate anions and two pyridine ligands into discrete negatively charged complexes, with the CrIII ion, as well as the two pyridine ligands, located on crystallographic mirror planes. The mean planes of the two pyridine ligands are rotated with respect to each other by 90°. Charge balance is achieved by one protonated pyridine mol­ecule that is hydrogen bonded to one additional pyridine solvent mol­ecule, with both located on crystallographic mirror planes and again rotated by exactly 90°. The pyridinium H atom was refined as disordered between both pyridine N atoms in a 70:30 ratio, leading to a linear N—H⋯N hydrogen bond. In the crystal, discrete complexes are linked by weak C—H⋯S hydrogen bonds into chains that are connected by additional C—H⋯S hydrogen bonding via the pyridinium cations and solvent mol­ecules into layers and finally into a three-dimensional network.

The title compound, [IrZnI2(C10H15)(C3H9P)2]·0.5C6H6 or [Cp*(PMe3)2Ir]-[ZnI2] (Cp* = cyclo-C5Me5) was obtained and characterized as its benzene solvate [Cp*(PMe3)2Ir]-[ZnI2]·0.5C6H6. The bimetallic complex in this structure contains the Lewis-acidic fragment ZnI2 bonded to the Lewis-basic fragment Cp*(PMe3)2Ir, with an Ir—Zn bond distance of 2.452 (1) Å. The compound was obtained by reacting [Cp*(PMe3)IrI2] with 2-Ad2Zn (2-Ad = 2-adamant­yl), resulting in the reduction of the IrIII complex and formation of the IrI–ZnII adduct. The crystal studied was a twin by non-merohedry with a refined BASF parameter of 0.223 (1).

A reaction of copper(II) carbonate and potassium 4-sulfo­benzoic acid in water acidified with hydro­chloric acid yielded two crystalline products. Tetra­aqua­bis­(4-carb­oxy­benzene­sulfonato)­copper(II) dihydrate, [Cu(O3SC6H4CO2H)2(H2O)4]·2H2O, (I), crystallizes in the triclinic space group Poverline{1} with the Cu2+ ions located on centers of inversion. Each copper ion is coordinated to four water mol­ecules in a square plane with two sulfonate O atoms in the apical positions of a Jahn–Teller-distorted octa­hedron. The carboxyl­ate group is protonated and not involved in coordination to the metal ions. The complexes pack so as to create a layered structure with alternating inorganic and organic domains. The packing is reinforced by several O—H⋯O hydrogen bonds involving coordinated and non-coordinated water mol­ecules, the carb­oxy­lic acid group and the sulfonate group. Hexa­aqua­copper(II) 4-carb­oxy­benzene­sulfonate, [Cu(H2O)6](O3SC6H4CO2H)2, (II), also crystallizes in the triclinic space group Poverline{1} with Jahn–Teller-distorted octa­hedral copper(II) aqua complexes on the centers of inversion. As in (I), the carboxyl­ate group on the anion is protonated and the structure consists of alternating layers of inorganic cations and organic anions linked by O—H⋯O hydrogen bonds. A reaction of silver nitrate and potassium 4-sulfo­benzoic acid in water also resulted in two distinct products that have been structurally characterized. An anhydrous silver potassium 4-carb­oxy­benzene­sulfonate salt, [Ag0.69K0.31](O3SC6H4CO2H), (III), crystallizes in the monoclinic space group C2/c. There are two independent metal sites, one fully occupied by silver ions and the other showing a 62% K+/38% Ag+ (fixed) ratio, refined in two slightly different positions. The coordination environments of the metal ions are composed primarily of sulfonate O atoms, with some participation by the non-protonated carboxyl­ate O atoms in the disordered site. As in the copper compounds, the cations and anions cleanly segregate into alternating layers. A hydrated mixed silver potassium 4-carb­oxy­benzene­sulfonate salt dihydrate, [Ag0.20K0.80](O3SC6H4CO2H)·2H2O, (IV), crystallizes in the monoclinic space group P21/c with the Ag+ and K+ ions sharing one unique metal site coordinated by two water mol­ecules and six sulfonate O atoms. The packing in (IV) follows the dominant motif of alternating inorganic and organic layers. The protonated carboxyl­ate groups do not inter­act with the cations directly, but do participate in hydrogen bonds with the coordinated water mol­ecules. (IV) is isostructural with pure potassium 4-sulfo­benzoic acid dihydrate.

The reaction of t-Bu2Si(OH)2 with two equivalents of Cp2Zr(CH3)2 produces the title t-Bu2SiO2-siloxide bridged dimer, [Zr2(CH3)2(C5H5)4(C8H18O2Si)] or [Cp2Zr(CH3)]2[μ-t-Bu2SiO2] (1), where one methyl group is retained per zirconium atom. The same product is obtained at room temperature even when equimolar ratios of the silanediol and Cp2Zr(CH3)2 are used. Attempts to thermally eliminate methane and produce a bridging methyl­ene complex resulted in decomposition. The crystal structure of 1 displays typical Zr—CH3 and Zr—O distances but the Si—O distance [1.628 (2) Å] and O—Si—O angle [110.86 (15)°] are among the largest observed in this family of compounds suggesting steric crowding between the t-Bu substituents of the silicon atom and the cyclo­penta­dienyl groups. The silicon atom lies on a crystallographic twofold axis and both Cp rings are disordered over two orientations of equal occupancy.

The title compound, [Fe(C44H24N8Cl4)(CN)2][K2(C18H36N2O6)2]·2C4H8O was synthesized and characterized by single-crystal X-ray diffraction as well as FTIR and UV–vis spectroscopy. The central FeII ion is coordinated by four pyrrole N atoms of the porphyrin core and two C atoms of the cyano groups in a slightly distorted octa­hedral coordination environment. The complex mol­ecule crystallizes with two tetra­hydro­furan solvent mol­ecules, one of which was refined as disordered over two sets of sites with refined occupancies of 0.619 (5) and 0.381 (5). It has a distorted porphyrin core with mean absolute core-atom displacements Ca, Cb, Cm and Cav of 0.32 (3), 0.22 (3), 0.56 (2) and 0.37 (14) Å, respectively. The axial Fe—Ccyano bond lengths are 1.991 (2) and 1.988 (2) Å. The average Fe—Np (Np is a porphyrin N atom) bond length is 1.964 (10) Å. One of the O atoms and several C atoms of the 222 moiety [222 = 4,7,13,16,21,24-hexa­oxa-1,10-di­aza­bicyclo­[8.8.8]hexa­cosa­ne] were refined as disordered over two sets of sites with occupancy ratios of 0.739 (6):0.261 (6) and 0.832 (4):0.168 (4). Additional solvent mol­ecules were found to be highly disordered and their contribution to the scattering was removed using the SQUEEZE procedure in PLATON [Spek (2015). Acta Cryst. C71, 9–18], which indicated a solvent cavity of volume 372 Å3 containing approximately 83 electrons. These solvent mol­ecules are not considered in the given chemical formula and other crystal data.

In the paper by Gomes et al. [Acta Cryst. (2019), E75, 1403–1410], there was an error and omission in the author and affiliation list.

The title compound, C9H7.5NO·C7H3.5ClNO4, was analysed as a disordered structure over two states, viz. co-crystal and salt, accompanied by a keto–enol tautomerization in the base mol­ecule. The co-crystal is 4-chloro-2-nitro­benzoic acid–quinolin-4(1H)-one (1/1), C7H4ClNO4·C9H7NO, and the salt is 4-hy­droxy­quinolinium 4-chloro-2-nitro­benzoate, C9H8NO+·C7H3ClNO4−. In the compound, the acid and base mol­ecules are held together by a short hydrogen bond [O⋯O = 2.4393 (15) Å], in which the H atom is disordered over two positions with equal occupancies. In the crystal, the hydrogen-bonded acid–base units are linked by N—H⋯O and C—H⋯O hydrogen bonds, forming a tape structure along the a-axis direction. The tapes are stacked into a layer parallel to the ab plane via π–π inter­actions [centroid–centroid distances = 3.5504 (8)–3.9010 (11) Å]. The layers are further linked by another C—H⋯O hydrogen bond, forming a three-dimensional network. Hirshfeld surfaces for the title compound mapped over shape-index and dnorm were generated to visualize the inter­molecular inter­actions.

In the title compound, C17H21NO4S, the 1,4-di­hydro­pyridine ring has an envelope conformation with the Csp3 atom at the flap. The thio­phene ring is nearly perpendicular to the best plane through the 1,4-di­hydro­pyridine ring, the dihedral angle being 82.19 (13)°. In the crystal, chains running along the b-axis direction are formed through N—H⋯O inter­actions between the 1,4-di­hydro­pyridine N atom and one of the O atoms of the ester groups. Neighbouring chains are linked by C—H⋯O and C—H⋯π inter­actions. A Hirshfeld surface analysis shows that the most prominent contributuion to the surface contacts are H⋯H contacts (55.1%).

In the title compound, C10H10N2OS, the five atoms of the thio­phene ring are essentially coplanar (r.m.s. deviation = 0.0037 Å) and the pyridazine ring is non-planar. In the crystal, pairs of N—H⋯O hydrogen bonds link the mol­ecules into dimers with an R22(8) ring motif. The dimers are linked by C—H⋯O inter­actions, forming layers parallel to the bc plane. The theoretical geometric parameters are in good agreement with XRD results. The inter­molecular inter­actions were investigated using a Hirshfeld surface analysis and two-dimensional fingerprint plots. The Hirshfeld surface analysis of the title compound suggests that the most significant contributions to the crystal packing are by H⋯H (39.7%), C⋯H/H⋯C (17.3%) and O⋯H/H⋯O (16.8%) contacts.

After crystallization during ionothermal syntheses in phospho­nium-containing ionic liquids, the structure of (NH4)3Al2(PO4)3 [tri­ammonium dialuminum tris­(phosphate)] was refined on the basis of powder X-ray diffraction data from a synchrotron source. (NH4)3Al2(PO4)3 is a member of the structural family with formula A3Al2(PO4)3, where A is a group 1 element, and of which the NH4, K, and Rb forms were previously known. The NH4 form is isostructural with the K form, and was previously solved from single-crystal X-ray data when the material (SIZ-2) crystallized from a choline-containing eutectic mixture [Cooper et al. (2004). Nature, 430, 1012–1017]. Our independent refinement incorporates NH4 groups and shows that these NH4 groups are hydrogen bonded to framework O atoms present in rings containing 12 T sites in a channel along the c-axis direction. We describe structural details of (NH4)3Al2(PO4)3 and discuss differences with respect to isostructural forms.

The title pyridazinone derivative, C20H18N2O3, is not planar. The phenyl ring and the pyridazine ring are inclined to each other by 10.55 (12)°, whereas the 4-methyl­benzyl ring is nearly orthogonal to the pyridazine ring, with a dihedral angle of 72.97 (10)°. In the crystal, mol­ecules are linked by pairs of O—H⋯O hydrogen bonds, forming inversion dimers with an R22(14) ring motif. The dimers are linked by C—H⋯O hydrogen bonds, generating ribbons propagating along the c-axis direction. The inter­molecular inter­actions were additionally investigated using Hirshfeld surface analysis and two-dimensional fingerprint plots. They revealed that the most significant contributions to the crystal packing are from H⋯H (48.4%), H⋯O/O⋯H (21.8%) and H⋯C/C⋯H (20.4%) contacts. Mol­ecular orbital calculations providing electron-density plots of HOMO and LUMO mol­ecular orbitals and mol­ecular electrostatic potentials (MEP) were also computed, both with the DFT/B3LYP/6–311 G++(d,p) basis set.

The mononuclear title complex, [Eu(C24H34O4P)3(CH4O)5]·CH4O, (1), has been obtained as a minor product in the reaction between EuCl3(H2O)6 and lithium bis­(2,6-diiso­propyl­phen­yl) phosphate in a 1:3 molar ratio in a methanol medium. Its structure exhibits monoclinic (P21/c) symmetry at 120 K and is isostructural with the La, Ce and Nd analogs reported previously [Minyaev et al. (2018a). Acta Cryst. C74, 590–598]. In (1), all three bis­(2,6-diiso­propyl­phen­yl) phosphate ligands display the terminal κ1O-coordination mode. All of the hy­droxy H atoms are involved in O—H⋯O hydrogen bonding, exhibiting four intra­molecular and two inter­molecular hydrogen bonds. Photophysical studies have demonstrated luminescence of (1) with a low quantum yield.

The structure of the jatrophane diterpenoid (ES2), C46H56O15, has ortho­rhom­bic (P212121) symmetry. The absolute configuration in the crystal has been determined as 2R,3R,4S,5R,7S,8S,9S,13S,14S,15R [the Flack parameter is −0.06 (11)]. The mol­ecular structure features intra­molecular O—H⋯O and C—H⋯O hydrogen bonding. In the crystal, C—H⋯O hydrogen bonds link the mol­ecules into supra­molecular columns parallel to the a axis. One of the acet­oxy substituents is disordered over two orientations in a 0.826 (8):0.174 (8) ratio.

The title compound, [FePt(C12H12O)(C18H15P)(C25H22P2)(CO)2]·2C7H8·CH2Cl2 or [(OC)2Fe(μ-dppm)(μ-C(=O)C(2,4,5-C6H2Me3)=CH)Pt(PPh3)], represents an example of a diphosphane-bridged heterobimetallic dimetalla­cyclo­pentenone complex resulting from a bimetallic activation of 1-ethynyl-2,4,5-tri­methyl­benzene and a metal-coordinated carbonyl ligand. The bridging μ2-C(=O)C(2,4,5-C6H2Me3)=CH unit (stemming from a carbon–carbon coupling reaction between CO and the terminal alkyne) forms a five-membered dimetalla­cyclo­pentenone ring, in which the C=C bond is π-coordinated to the Fe centre. The latter is connected to the Pt centre through a short metal–metal bond of 2.5770 (5) Å. In the crystal, the complex is solvated by one di­chloro­methane and two toluene mol­ecules.

In the title hydrated hybrid compound C14H14N2OS2·H2O, the planar imidazo[1,2-a]pyridine ring system is linked to the 1,3-di­thiol­ane moiety by an enone bridge. The atoms of the C—C bond in the 1,3-di­thiol­ane ring are disordered over two positions with occupancies of 0.579 (14) and 0.421 (14) and both disordered rings adopt a half-chair conformation. The oxygen atom of the enone bridge is involved in a weak intra­molecular C—H⋯O hydrogen bond, which generates an S(6) graph-set motif. In the crystal, the hybrid mol­ecules are associated in R22(14) dimeric units by weak C—H⋯O inter­actions. O—H⋯O hydrogen bonds link the water mol­ecules, forming infinite self-assembled chains along the b-axis direction to which the dimers are connected via O—H⋯N hydrogen bonding. Analysis of inter­molecular contacts using Hirshfeld surface analysis and contact enrichment ratio descriptors indicate that hydrogen bonds induced by water mol­ecules are the main driving force in the crystal packing formation.

In the title mol­ecule, C13H16N4O3, the mean planes of the phenyl and triazole rings are nearly perpendicular to one another as a result of the intra­molecular C—H⋯O and C—H⋯π(ring) inter­actions. In the crystal, layers parallel to (101) are generated by O—H⋯N, N—H⋯O and N—H⋯N hydrogen bonds. The layers are connected by inversion-related pairs of C—H⋯O hydrogen bonds. The experimental mol­ecular structure is close to the gas-phase geometry-optimized structure calculated by DFT methods. Hirshfeld surface analysis indicates that the most important inter­action involving hydrogen in the title compound is the H⋯H contact. The contribution of the H⋯O, H⋯N, and H⋯H contacts are 13.6, 16.1, and 54.6%, respectively.

In the title mol­ecule, C11H10N2O, the di­hydro­benzimidazol-2-one moiety is essentially planar, with the prop-2-yn-1-yl substituent rotated well out of this plane. In the crystal, C—HMthy⋯π(ring) inter­actions and C—HProp⋯ODhyr (Mthy = methyl, Prop = prop-2-yn-1-yl and Dhyr = di­hydro) hydrogen bonds form corrugated layers parallel to (10overline{1}), which are associated through additional C—HBnz⋯ODhyr (Bnz = benzene) hydrogen bonds and head-to-tail, slipped, π-stacking [centroid-to-centroid distance = 3.7712 (7) Å] inter­actions between di­hydro­benzimidazol-2-one moieties. The Hirshfeld surface analysis of the crystal structure indicates that the most important contributions to the crystal packing are from H⋯H (44.1%), H⋯C/C⋯H (33.5%) and O⋯H/H⋯O (13.4%) inter­actions. Hydrogen-bonding and van der Waals inter­actions are the dominant inter­actions in the crystal packing. Computational chemistry calculations indicate that in the crystal, C—H⋯O hydrogen-bond energies are 46.8 and 32.5 (for C—HProp⋯ODhyr) and 20.2 (for C—HBnz⋯ODhyr) kJ mol−1. Density functional theory (DFT) optimized structures at the B3LYP/6–311 G(d,p) level are compared with the experimentally determined mol­ecular structure in the solid state. The HOMO–LUMO behaviour was elucidated to determine the energy gap.

Three title compounds, namely, 2-(4-chloro­benz­yl)-5-[(1H-indol-3-yl)meth­yl]-6-phenyl­imidazo[2,1-b][1,3,4]thia­diazole, C26H19ClN4S, (I), 2-(4-chloro­benz­yl)-6-(4-fluoro­phen­yl)-5-[(1H-indol-3-yl)meth­yl]imidazo[2,1-b][1,3,4]thia­diazole, C26H18ClFN4S, (II), and 6-(4-bromo­phen­yl)-2-(4-chloro­benz­yl)-5-[(1H-indol-3-yl)meth­yl]imidazo[2,1-b][1,3,4]thia­diazole, C26H18BrClN4S, (III), have been prepared using a reductive condensation of indole with the corresponding 6-aryl-2-(4-chloro­benz­yl)imidazo[2,1-b][1,3,4]thia­diazole-5-carbaldehydes (aryl = phenyl, 4-fluoro­phenyl or 4-bromo­phen­yl), and their crystal structures have been determined. The asymmetric unit of compound (I) consists of two independent mol­ecules and one of the mol­ecules exhibits disorder of the 4-chloro­benzyl substituent with occupancies 0.6289 (17) and 0.3711 (17). Each type of mol­ecule forms a C(8) chain motif built from N—H⋯N hydrogen bonds, which for the fully ordered mol­ecule is reinforced by C—H⋯π inter­actions. In compound (II), the chloro­benzyl unit is again disordered, with occupancies 0.822 (6) and 0.178 (6), and the mol­ecules form C(8) chains similar to those in (I), reinforced by C—H⋯π inter­actions involving only the major disorder component. The chloro­benzyl unit in compound (III) is also disordered with occupancies of 0.839 (5) and 0.161 (5). The mol­ecules are linked by a combination of one N—H⋯N hydrogen bond and four C—H⋯π inter­actions, forming a three-dimensional framework.