Back in 2017, the U.S. Center for Disease Control and Prevention (CDC) published this infographic on the Facial Hairstyles and Filtering Facepiece Respirators to help men understand that beards can make facemasks ineffective. With the daily news about the Coronavirus (Covid-19) bordering on panic, this infographic has resurfaced, and is being widely republished.

NOTE: The CDC does not recommend that people who are well wear a facemask to protect themselves from COVID-19.

From the CDC FAQ:

Does the CDC recommend the use of facemask to prevent COVID-19?

CDC does not recommend that people who are well wear a facemask to protect themselves from respiratory illnesses, including COVID-19. You should only wear a mask if a healthcare professional recommends it. A facemask should be used by people who have COVID-19 and are showing symptoms. This is to protect others from the risk of getting infected. The use of facemasks also is crucial for health workers and other people who are taking care of someone infected with COVID-19 in close settings (at home or in a health care facility).

From the original CDC blog post on November 2, 2017:

The month of November is full of fun, interesting, and thought-provoking observances. November is National Raisin Bread Month, Historic Bridge Awareness Month, and Inspirational Role Models Month among so much more. November is also the host month to campaigns like No-Shave November and Movember. Campaigns such as these are working hard to raise money for important causes such as cancer research, education, and awareness. These increasingly popular campaigns are a great way to demonstrate your support … unless you need to wear a tight-fitting respirator for your job.

Don’t despair! We will not completely ruin your plans to compete for facial hair bragging rights. But we’re going to have to get creative about it…

I do love that the CDC is using infographics to spread valuable information in a fun, easy-to-digest way that informs people using visual explanations. They also specifically call out the designer of the beard and moustache vector art they used from ShutterStock, fredrisher

By Jessica Corbett Common Dreams Far-reaching global assessment details how humanity is undermining the very foundations of the natural world     On the heels of an Earth Day that featured calls for radical action to address the current “age … Continue reading →

By Jessica Corbett Common Dreams Far-reaching global assessment details how humanity is undermining the very foundations of the natural world     On the heels of an Earth Day that featured calls for radical action to address the current “age … Continue reading →

The time has come and our loyal reader know already our traditional Advents Calendar. For the people who don’t know, […]

So many of us are going along on the path that we think we want, only to realize that something is missing. The same was true for today’s guest, Chelsea Yamase (@chelseakauai) who found herself heading into a potential career that was slowly killing her soul. Through a winding path of architecture, graphic design, journalism, and a myriad of side hustles, she found herself faced with the big question: pursue the unconventional life of your dreams or stick to a “real job”. She lept. Today, Chelsea is a sought after model, photographer, influencer and movement enthusiast from Hawaii with a focus on mindful living. She’s been featured in Travel and Leisure, Cosmopolitan, Condé Nast Traveler, to name a few, and and worked with numerous brands such as Canon USA, Adidas, Google, Athleta, GoPro, DJI Global and The National Parks Foundation. In this episode: How to give yourself structure that can help you take a leap into an unconventional lifestyle What can you make with what’s around you? Constraints are a path to creativity and a key gaining new perspectives As money and opportunities come in, how do you stay in alignment with your values and the work you really want […]

The post Finding True North with Chelsea Yamase appeared first on Chase Jarvis Photography.

This week I’m in the hot seat with one of the leading experts in mindset training. Dr. Michael Gervais is a high performance psychologist working in the trenches of high-stakes environments with some of the best in the world. His clients include world record holders, Olympians, internationally acclaimed artists, MVPs from every major sport and Fortune 100 CEOs. Dr. Gervais is also the co-founder of Compete to Create, an educational platform for mindset training. Today I’m on his podcast Finding Mastery which unpacks & decodes each guest’s journey to mastery through mindset skills and practices. If you’ve been a listener for awhile, you’ll know this is one of my favorite topics and something I wholeheartedly credit to unlocking my best work. In this episode: How I learned to trust my intuition Dr. Gervais aptly calls out two journeys to mastery: one of self, and one of craft. I share my perspective on how mastery of craft is a required step to mastering oneself We’re taught that making mistakes is bad so we should avoid them. What we really should be taught is it’s not about avoiding mistakes, it’s about error recovery. and much more… Enjoy! FOLLOW MICHAEL: instagram | twitter […]

The post Finding Mastery: A Conversation with Michael Gervais appeared first on Chase Jarvis Photography.

What would happen if the logos of famous brands suddenly wake up in the bed of another? Thats what the new tumblr blog Logo Mashups explores. It makes us think in the in the connections they share and how they are constantly appealing to our consumer mind through the commons grounds of symbology and typography.

In this episode of the Smashing Podcast, we’re talking about building apps on a tight timeline. How can you quickly turn around a project to respond to an emerging situation like COVID-19? Drew McLellan talks to Phil Smith to find out. Show Notes CardMedic React Native React Native for Web Expo Apiary Phil’s company amillionmonkeys Phil’s personal blog and Twitter Weekly Update Getting Started With Nuxt Implementing Dark Mode In React Apps Using styled-components How To Succeed In Wireframe Design Mirage JS Deep Dive: Understanding Mirage JS Models And Associations (Part 1) Readability Algorithms Should Be Tools, Not Targets Transcript Drew McLellan: He is director of the full-stack web development studio amillionmonkeys, where he partners with business owners and creative agencies to build digital products that make an impact.

In these strange times when everything is connected, it’s too easy to feel lonely and detached. Yes, everybody is just one message away, but there is always something in the way — deadlines to meet, Slack messages to reply, or urgent PRs to review. Connections need time and space to grow, just like learning, and conferences are a great way to find that time and that space. In fact, with SmashingConfs, we’ve always been trying to create such friendly and inclusive spaces.

We prove a Marstrand type slicing theorem for the subsets of the integer square lattice. This problem is the dual of the corresponding projection theorem, which was considered by Glasscock, and Lima and Moreira, with the mass and counting dimensions applied to subsets of $mathbb{Z}^{d}$. In this paper, more generally we deal with a subset of the plane that is $1$ separated, and the result for subsets of the integer lattice follow as a special case. We show that the natural slicing question in this setting is true with the mass dimension.

We study the time-averaged flux in a model of particles that randomly hop on a finite directed graph. In the limit as the number of particles and the time window go to infinity but the graph remains finite, the large-deviation rate functional of the average flux is given by a variational formulation involving paths of the density and flux. We give sufficient conditions under which the large deviations of a given time averaged flux is determined by paths that are constant in time. We then consider a class of models on a discrete ring for which it is possible to show that a better strategy is obtained producing a time-dependent path. This phenomenon, called a dynamical phase transition, is known to occur for some particle systems in the hydrodynamic scaling limit, which is thus extended to the setting of a finite graph.

Funding the production of quality online content is a pressing problem for content producers. The most common funding method, online advertising, is rife with well-known performance and privacy harms, and an intractable subject-agent conflict: many users do not want to see advertisements, depriving the site of needed funding.

Because of these negative aspects of advertisement-based funding, paywalls are an increasingly popular alternative for websites. This shift to a "pay-for-access" web is one that has potentially huge implications for the web and society. Instead of a system where information (nominally) flows freely, paywalls create a web where high quality information is available to fewer and fewer people, leaving the rest of the web users with less information, that might be also less accurate and of lower quality. Despite the potential significance of a move from an "advertising-but-open" web to a "paywalled" web, we find this issue understudied.

This work addresses this gap in our understanding by measuring how widely paywalls have been adopted, what kinds of sites use paywalls, and the distribution of policies enforced by paywalls. A partial list of our findings include that (i) paywall use is accelerating (2x more paywalls every 6 months), (ii) paywall adoption differs by country (e.g. 18.75% in US, 12.69% in Australia), (iii) paywalls change how users interact with sites (e.g. higher bounce rates, less incoming links), (iv) the median cost of an annual paywall access is $108 per site, and (v) paywalls are in general trivial to circumvent.

Finally, we present the design of a novel, automated system for detecting whether a site uses a paywall, through the combination of runtime browser instrumentation and repeated programmatic interactions with the site. We intend this classifier to augment future, longitudinal measurements of paywall use and behavior.

In this paper, we propose a new nonlinear detector with improved interference suppression in Multi-User Multiple Input, Multiple Output (MU-MIMO) system. The proposed detector is a combination of the following parts: QR decomposition (QRD), low complexity users sorting before QRD, sorting-reduced (SR) K-best method and minimum mean square error (MMSE) pre-processing. Our method outperforms a linear interference rejection combining (IRC, i.e. MMSE naturally) method significantly in both strong interference and additive white noise scenarios with both ideal and real channel estimations. This result has wide application importance for scenarios with strong interference, i.e. when co-located users utilize the internet in stadium, highway, shopping center, etc. Simulation results are presented for the non-line of sight 3D-UMa model of 5G QuaDRiGa 2.0 channel for 16 highly correlated single-antenna users with QAM16 modulation in 64 antennas of Massive MIMO system. The performance was compared with MMSE and other detection approaches.

We utilize recent results on the exact block error probability of Gaussian random codes in additive white Gaussian noise to analyze Gaussian random coding for massive multiple-access at finite message length. Soft iterative interference cancellation is found to closely approach the performance bounds recently found in [1]. The existence of two fundamentally different regimes in the trade-off between power and bandwidth efficiency reported in [2] is related to much older results in [3] on power optimization by linear programming. Furthermore, we tighten the achievability bounds of [1] in the low power regime and show that orthogonal constellations are very close to the theoretical limits for message lengths around 100 and above.

The issues of sports-related concussions and chronic traumatic encephalopathy were intensified when the brain of a deceased 21-year-old football player was examined.

By Jeff Mulhollem Penn State News The first harvest of 34 acres of fast-growing shrub willow from a Penn State demonstration field this winter is a milestone in developing a sustainable biomass supply for renewable energy and bio-based economic development, … Continue reading →

By The Office of Energy Efficiency & Renewable Energy Within 25 years, the United States could produce enough biomass to support a bioeconomy, including renewable aquatic and terrestrial biomass resources that could be used for energy and to develop products … Continue reading →

This is hardly the first time the Catholic Church has to deal with a plague. Spokane Bishop Thomas Daly knows that well.…

Thirty years into his distinguished career as one of the world's great guitar players, Joe Bonamassa is still finding new ways to showcase his skills, explore new sounds and stretch his artistic horizons.…

Sewing is my new coping mechanism.…

During the late '80s, Thomas Hammer got a job at the mobile coffee bar outside Nordstrom in downtown Spokane.…

Described herein are compounds and compositions that modulate the activity of beta-lactamases. In some embodiments, the compounds described herein inhibit beta-lactamase. In certain embodiments, the compounds described herein are useful in the treatment of bacterial infections.

An improved biomass feed system and processes for transporting biomass to downstream processing locations are disclosed. The system uses a pressurized gas to assist in the transporting of the biomass to the conversion reactor.

Disclosed is a process for biomass conversion which includes co-processing the biomass with thermoplastic and non-thermoplastic polymer based materials in a catalytic pyrolysis reactor to convert such to liquid hydrocarbons; wherein hydrogen atoms originating with the polymer materials can remove oxygen from oxygenated hydrocarbons produced in the conversion of the biomass in the reactor.

A process for the conversion of biomass to hydrocarbon products such as transportation fuels, kerosene, diesel oil, fuel oil, chemical and refinery plant feeds. The instant process uses a hydrocarbon or synthesis gas co-feed and hot pressurized water to convert the biomass in a manner commonly referred to as hydrothermal liquefaction.

Method of extracting syngas between the zone in a furnace where oxygen-starved combustion of biomass occurs and the zone in the furnace where secondary air is added to complete combustion, conditioning and cleaning the extracted syngas, and delivering it in a metered amount to the oxidizer or upstream of the oxidizer to reduce or eliminate the need for additional fossil fuels once the oxidizer has achieved its operating temperature. The gasifier or furnace burns solid waste and produces a syngas containing relatively high levels of CO, which is extracted from the furnace, conditioned, and introduced into an RTO as a fuel source. In certain embodiments, no extraction of syngas from the furnace takes place; the furnace conditions are manipulated so that normally undesirable levels of CO and other VOC's remain in the process stream. The heat from the furnace is used as intended (e.g., to heat a dryer), the stream is conditioned, and ultimately proceeds to a downstream RTO. Since the gas stream remains rich in CO and VOC's, its fuel value in the RTO is substantially higher than otherwise would be the case.

Methods or preparing para-xylene from biomass by carrying out a Diels-Alder cycloaddition at controlled temperatures and activity ratios. Methods of preparing bio-terephthalic acid and bio-poly(ethylene terephthalate (bio-PET) are also disclosed, as well as products formed from bio-PET.

In one embodiment of the invention, a method is disclosed for modifying a pre-existing application program for multi-processing and/or distributed parallel processing. The method includes searching an application program for a computational loop; analyzing the computational loop to determine independence of the computational transactions of the computational loop; and replacing the computational loop with master code and slave code to provide master-slave execution of the computational loop in response to analyzing the computational loop to determine independence of the computational transactions of the computational loop. Multiple instances of the modified application program are executed to provide multi-processing and/or distributed parallel processing.

An individual alkamide and/or a mixture having two or more different alkamides, is disclosed for changing, masking or reducing the unpleasant flavor impression of an unpleasant-tasting substance or mixture of substances. The alkamide can be trans-pellitorine; cis-pellitorine; 2Z,4Z- or 2Z,4E-decadienoic acid-N-isobutylamide; 2E,4E-decadienoic acid-N-([2S]-2-methylbutyl)amide; 2E,4E-decadienoic acid-N-([2R]-2-methylbutylamide); 2E,4Z-decadienoic acid-N-(2-methylbutyl)amide; achilleamide; sarmentine; 2E- or 3E-decenoic acid-N-isobutylamide; 3E-nonenoic acid-N-isobutylamide; spilanthol; homospilanthol; 2E,6Z,8E-decatrienoic acid-N-([2R]-2-methylbutyl)amide; 2E- or 2Z-decen-4-oic acid-N-isobutylamide; α-sanshool; α-hydroxysanshool; γ-hydroxysanshool; γ-hydroxysanshool; γ-hydroxyisosanshool; γ-dehydrosanshool; γ-sanshool; bungeanool; isobungeanool; dihydrobungeanool; or tetrahydrobungeanool, or combinations thereof.

The present invention provides a resin capable of contributing greatly to solve environmental problems and problems related to exhaustion of fossil fuel resources and having physical properties suited for practical use. The polyester according to the present invention has a diol and a dicarboxylic acid as constituent components and has an amount of terminal acid of 50 equivalents/metric ton or less.

A device is described for measuring electrical characteristics of biological tissues with one or a plurality of electrodes and a processor controlling the stimulation and measurement in order to detect the presence of abnormal tissue masses in the breast and determine probability of tumors containing malignant cancer cells being present in a breast. The device has the capability of providing the location of the abnormality, at least to the quadrant. Either single or multiple source electrodes can be used. Either palpable lumps can be evaluated or screening or breasts, whether with palpable masses or not, can be accomplished. The method for measuring electrical characteristics includes placing electrodes and applying a voltage waveform in conjunction with a current detector. A mathematical analysis method is then applied to the collected data, which computes spectrum of frequencies and correlates magnitudes and phases with given algebraic conditions to determine mass presence and type.

A stigmasterol-rich phytosterol composition is prepared wherein the composition comprises at least 50% stigmasterol, based on the total weight of phytosterols, no more than 1000 ppm water, no more than 50 ppm ethanol, and wherein stigmasterol is at least 98% in the anhydrous form. A ready-to-freeze beverage is provided comprising the stigmasterol-rich composition and water, with optional additives. A frozen beverage is prepared from the ready-to-freeze beverage as a pourable slush. There are further provided processes to prepare the ready-to-freeze beverage and the frozen slush beverage.

A method is disclosed for generating a mass spectrum, e.g. for Fourier transform mass spectrometry, having improved resolving power. The method includes steps of acquiring a plurality of mass spectra from a mass spectrometer using image current detection determining the centroids of at least some of the peaks which have a sufficient signal-to-noise (S/N) ratio so that the variation of the centroid of each such peak from the plurality of mass spectra is significantly lower than the full-width at half-maximum, dM, of the peak in the m/z domain; and generating a histogram of the centroids determined from the plurality of acquired mass spectra thereby forming a composite mass spectrum. The resultant composite mass spectrum comprises peaks having full-width at half-maximum, dMC, significantly narrower than the peak width, dM, of the corresponding peaks in the plurality of acquired mass spectra.

A biomass gasification gas purification system includes a dust collector for removing dust in biomass gasification gas (containing tar components) acquired by gasifying biomass by a biomass gasification furnace, a desulfurizer for removing sulfur oxide components in the dust-removed biomass gasification gas, a pre-reforming reactor for reforming tar components in the desulfurized biomass gasification gas, a steam feed unit for feeding steam to an upstream side of the pre-reforming reactor, and a natural-gas feed unit for feeding natural gas on an upstream side of the desulfurizer.

A portable hydro massage device for submersion in a body of water containing a female user, i.e. a bathtub, provides a local massage to the labium region and a focused stimulant to the female user's clitoris thereby resulting in a superior sensation to the entire body promoting an overall euphoric state and calming effect. The apparatus employs a saddle shaped housing, where the buttocks are placed, and a saddle horn for controlling the stimulus. Disposed within the midsection of the saddle horn is a hydro jet with a driven flow from a circulating water pump that draws suction from the main body of water. The hydro jet is adjustable in pressure and a method is provided for aeration of the water discharged to allow for a rhythmic pulsation effect. The saddle horn may be held and the lower body positioned as needed to focus the discharged stream from the hydro jet to the desired point of the pelvic region.

A massage roller includes a generally resilient roller body and a plurality of massage zones having various densities provided on the roller body.

A foot massaging device having a plurality of parallel cylindrical rollers mounted within a frame. The frame includes adjustment slots allowing the rollers to be relocated within the frame to present various massaging configurations. The foot massaging device is adjustable by seating the rearwardly disposed rollers between a raised and lowered position to configure the rollers to contact different portions of a user's foot.

The present invention provides in some embodiments, a portable device for massaging and treating a person's muscles. The device can include an elongate center shaft and a roller section rotatably positioned about the outer surface of the elongate cylindrical center shaft and extending at least a portion of a distance between the first end of the elongate cylindrical center shaft and the second end of the elongate cylindrical center shaft. The device can also include a first and second handle coupled to the elongate center shaft. The first and second handles can be configured to collapse in order to decrease an overall length of the portable roller massager.

A massage device is disclosed and may include a substantially solid body with an array of at least twenty, and in some cases thirty or thirty-two or more, massage fingers each with an outward tip, an inward base and a center axis, the center axis extending to a center of the body. The massage fingers are spaced about the body at substantially equal distances from each of at least three, and in some cases up to five or six, massage fingers nearest to each massage finger such that the center axis of each massage finger is spaced and positioned to correspond to a location of one of at least twenty vertices of a polyhedron, in some cases a pentakis dodecahedron, and aligns with a vertex axis extending from a polyhedron center point through one of the vertices of the polyhedron.

An extreme ultraviolet lithography (EUVL) process is performed on a target, such as a semiconductor wafer, having a photosensitive layer. The method includes providing a one-dimensional patterned mask along a first direction. The patterned mask includes a substrate including a first region and a second region, a multilayer mirror above the first and second regions, an absorption layer above the multilayer mirror in the second region, and a defect in the first region. The method further includes exposing the patterned mask by an illuminator and setting the patterned mask and the target in relative motion along the first direction while exposing the patterned mask. As a result, an accumulated exposure dose received by the target is an optimized exposure dose.

A mask includes a substantially transparent portion. The mask further includes a halftone portion abutting the substantially transparent portion, a light transmittance of the halftone portion being greater than 0% and less than 100%. The mask further includes a blocking portion abutting the halftone portion, a light transmittance of the blocking portion being less than the light transmittance of the halftone portion.

A method includes scanning a lithography mask with a repair process, and measuring back-scattered electron signals of back-scattered electrons generated from the scanning. An endpoint is determined from the back-scattered electron signals. A stop point is calculated from the endpoint. The step of scanning is stopped when the calculated stop point is reached.

A method of tilting liquid crystal molecules is presented. The method entails providing a substrate including a photoalignment layer on top of a layer of liquid crystal molecules. The photoalignment layer is exposed to patterned light that is incident on the substrate at a substantially normal angle. The patterned light is polarized in a polarization direction that is non-parallel to an incident surface of the substrate.

Techniques for reducing the number of shots required by a radiation beam writing tool to write a pattern, such as fractured layout design, onto a substrate. One or more apertures are employed by a radiation beam writing tool to write a desired pattern onto a substrate using L-shaped images, T-shaped images, or some combination of both. By reducing the number of shots required to write a pattern onto a substrate, various implementations of the invention may reduce the write time and/or write complexity of the write process.

A mask blank for use in the manufacture of a binary mask adapted to be applied with ArF excimer laser exposure light has, on a transparent substrate, a light-shielding film for forming a transfer pattern. The light-shielding film has a laminated structure of a lower layer and an upper layer and has an optical density of 2.8 or more for exposure light and a thickness of 45 nm or less. The lower layer is made of a material in which the total content of a transition metal and silicon is 90 at % or more, and has a thickness of 30 nm or more. The upper layer has a thickness of 3 nm or more and 6 nm or less. The phase difference between exposure light transmitted through the light-shielding film and exposure light transmitted in air for a distance equal to the thickness of the light-shielding film is 30 degrees or less.

The present invention relates to methodology and constructs for modifying plant architecture and enhancing plant biomass and/or sucrose yield.

A machine for continuous casting of pre-mortared masonry panels includes a rotatable continuous mold for continuously forming pre-mortared masonry panels and an application system for applying polymeric material to the continuous mold as the continuous mold rotates. The machine also includes a brick setter system for setting bricks onto the polymeric material as the continuous mold rotates. The machine further includes a cutting device for cutting the bricks and polymeric material into panels to form the pre-mortared masonry panels.

A ceramic mass transfer packing element that includes a planar end surface which intersects an internal wall's geometric plane at an acute angle is disclosed. A process for making the packing element and an apparatus that uses the packing element are also disclosed.

Provided is a masking system of masks for use with multiwell plates such as microtiter plates to facilitate sample dispensing and assay accuracy, especially when dispensing more than one solution into the wells. One or more masks, adapted in size to fit snugly over a multiwell plate and the mask formed with openings each aligned with a subset of one or more wells of the plate beneath, aids the user in sample and/or reagent administration. Advantageously, the masks contain registration aids so that proper orientation with respect to the plate below is achieved; the registration aid may be a cut corner, registration peg or mark, or visual marking or stamping.