Implementing a layered hyperbolic metamaterial in a vertical cavity surface emitting laser (VCSEL) to improve thermal conductivity and thermal dissipation thereby stabilizing optical performance. Improvement in the thermal management and power is expected by replacing the distributed Bragg reflector (DBR) mirrors in the VCSEL. The layered metamaterial structure performs the dual function of the DBR and the heat spreader at the same time.

A high power fiber laser system emitting a substantially diffraction limited beam with a Gaussian intensity profile includes a single mode (“SM”) neodymium fiber pump source outputting a SM pump light; a seed laser operative to emit a SM signal light at a wavelength greater than that of the pump light; a SM DWM receiving and multiplexing the SM pump and signal lights. The disclosed system further includes a booster fiber amplifier which is configured with a frustoconically-shaped ytterbium (“Yb”) doped core receiving the pump and signal lights and configured with a small diameter input end which supports only a SM and a large diameter output end which is capable of supporting the SM and high order modes (:HOM”). The booster further has a cladding surrounding and coextending with the core, the core being configured for having intensity profiles of respective SMs of pump and signal lights overlap one another so that an overlap integral substantially equals to one (1) along an entire length of the core. The SM of the light signal extracts substantially the entire energy from the pump mode leaving the HOMs without amplification necessary to affect a quality of the diffraction limited beam of the system in a MW peak power range and hundreds of watt average power range.

A GRINSCH laser having an asymmetric configuration wherein the optical confinement is weighted more to the n-doped multilayer section than to the p-doped multilayer section. The GRINSCH laser can emit laser light at a wavelength λ=976 nm over a broad area with a beam power of 11.4 W at a 12 A bias current at a temperature of 20° C. Fabry-Perot and distributed Bragg reflector GRINSCH laser configurations are disclosed.

There is provided a transport vehicle for transporting wind power installation rotor blades and/or pylon segments. The transport vehicle has a transport support structure having a main frame, a receiving frame fixedly connected to the main frame at a first angle, and a rotary displacement unit which is fixed with one end to the receiving frame and which at its second end has a blade adaptor for receiving a rotor blade or a pylon segment. The main frame spans a main plane. The rotary displacement unit has at least one first rotary mounting, wherein there is provided a second angle between the second rotary plane of the second rotary mounting.

Techniques for reducing scan overhead in a scannable flop tray are described herein. In one embodiment, a scan circuit for a flop tray comprises a tri-state circuit configured to invert an input data signal and output the inverted data signal to an input of a flip-flop of the flop tray in a normal mode, and to block the data signal from the input of the flip-flop in a scan mode. The scan circuit also comprises a pass gate configured to pass a scan signal to the input of the flip-flop in the scan mode, and to block the scan signal from the input of the flip-flop in the normal mode.

There is provided a multi power supply type level shifter. The provided multi power supply type level shifter includes a first level shifter and a second level shifter in a two-stage architecture so as to selectively receive first to third power supplies and change a signal level, even when the first to third power supplies are applied in a different sequence from a normal power-on sequence. Output voltages are output without a change in level, and short-circuit currents are not generated in the first and second level shifters.

A semiconductor device includes an internal circuit, a power supply control circuit which controls supply of a power supply to the internal circuit upon receipt of a first control signal, and a control signal generation circuit which outputs the first control signal upon receipt of a second control signal. The control signal generation circuit does not deactivate the first control signal when an inactive period of the second control signal is equal to or less than a first period and deactivates the first control signal when the inactive period of the second control signal is more than the first period.

A transceiver includes a transmitter and receiver that form a series current path between two power-supply nodes. Powering both the transmitter and receiver with the same supply current saves power. The transmitter functions as a resistive load for the receiver, and thus performs useful work with power that would otherwise be dissipated as waste heat.

A method and apparatus that controls the clock of a digital circuit, and therefore power consumption, without substantially comprising performance is provided. The apparatus may include monitoring the utilization of a First in First Out (FIFO) buffer. For example in a systems and methods according to the invention, clock speed may be reduced when the FIFO is relatively empty and increased when the FIFO is relatively full. The clock speed may be controlled by a phase locked loop, a clock divider, a clock masking device or a combination of more than one of these methods. Power reduction may also be obtained by controlling the clocking of different stages of a pipelined device. One or more aspects of the inventions may be implemented in combination with other aspects of the invention to further reduce power use.

An integrated oscillator circuit comprises an oscillator configured to be switched between a first frequency and a second frequency. A switching circuit receives an input representing a target frequency and switches the oscillator between the first and second frequencies at intervals determined by the input, so as to cause the average output frequency of the oscillator to approximate the target frequency.

Power-efficient actuator apparatus and methods. In one exemplary embodiment, the actuator assembly utilizes a shape memory alloy (SMA) filament driven by an electronic power source to induce movement in the underlying assembly to actuate a load (e.g., water valve). In addition, a circuit board is included which allows the actuator assembly to be readily incorporated or retrofit into a wide range of systems such that the signal characteristics of the supply line can, among other applications, be conditioned in order to protect the SMA filament. Furthermore, the circuit board can also readily be adapted for use with “green” power sources such as photovoltaic systems and the like. Methods for manufacturing and utilizing the aforementioned actuator assembly are also disclosed.

A tunable capacitor device may be provided in accordance with example embodiments of the invention. The tunable capacitor device may include a first capacitor; a second capacitor; a third capacitor, where the first, second, and third capacitors are connected in series, wherein the second capacitor is positioned between the first capacitor and the second capacitor; and at least one switch transistor, where the at least one switch transistor is connected in parallel with the second capacitor.

There is provided a bearing for motor-powered fuel injection pumps, made from Cu—Ni-based sintered alloy, which is able to be obtained at a low cost, having excellent corrosion and abrasion resistances. The bearing contains 10 to 20% by mass of Ni, 5 to 13% by mass of Sn, 0.1 to 0.8% by mass of P, 1 to 6% by mass of C, and a remainder containing Cu and inevitable impurities, and is formed with a Ni—Sn—Cu—P phase containing at least 30% by mass of Sn in a grain boundary, and has a 8 to 18% porosity. The Ni—Sn—Cu—P phase contains 30 to 49% by mass of Ni, 10 to 30% by mass of Cu, 0.5 to 1.5% by mass of P, and a remainder containing Sn and inevitable impurities.

A nuclear power plant with an improved cooling system using nanoparticles in solid or fluid form is provided. The nanoparticles are delivered in locations such as the cold leg accumulator and high and low pressure pumps of an emergency core cooling system. Motor driven valves and pressurization can aid in the delivery. Methods for providing the nanoparticles are also provided.

An axial power distribution control device includes an axial offset calculation unit 52, a parameter calculation unit 53, and an axial offset determining unit 55. The axial offset determining unit 55 predicts whether a core axial offset of the power distribution is increased or decreased after a current time, based on a major axis of an ellipse drawn by the xenon parameter and the iodine parameter calculated by the parameter calculation unit 53 and the xenon parameter and the iodine parameter at the current time. This makes it possible to predict a change of the axial offset of the power distribution of a reactor for suppressing a xenon oscillation in the reactor.

This document's object is to provide an axial power distribution control method in which only the control of an axial power distribution in a nuclear reactor with a simple operation with a clear operational target keeps the control of a xenon oscillation, thereby suppressing the xenon oscillation to an extremely small magnitude in advance at the same time. An axial power distribution control method comprises an axial offset calculation step of calculating an axial offset of the current power distribution (AOP) and axial offsets of the power distributions (AOX, AOI) which would give the current xenon and iodine distributions under equilibrium conditions, respectively, based on relative powers (PT, PB) in the upper and lower halves of the nuclear reactor core, a parameter calculation step of calculating parameters (DAOPX, DAOIX), a trajectory display step of displaying a trajectory to plot the parameters (DAOPX, DAOIX) on one and the other axis, respectively, an allowable range excess judgment step of judging if the axial offset of the current power distribution (AOP) exceeds an allowable range, an alarming step of giving the alarm when the AOP exceeds the allowable range, and a control rod moving step of controlling the movement of control rods to guide the plot to the major axis of an ellipse formed by the trajectory of said parameters upon receipt of the alarm.

A method and apparatus for the calibration of neutron flux monitoring devices used in a nuclear reactor core. The apparatus includes a transverse in-core probe (TIP) cable with a neutron absorber located a fixed distance apart from a TIP detector. The neutron absorber may be passed within close proximity of the neutron flux monitoring device such that a perceived drop in measured neutron flux occurs, whereupon the cable may be repositioned relative to the monitoring device to ensure that the TIP detector is within close proximity of the monitoring device for purposes of calibrating the monitoring device.

The present disclosure provides methods and devices for testing a connection between speakers and a power amplifier. The disclosed methods and devices solve a problem that, upon a connection test for a power amplifier which has a booster power source, when a midpoint potential of the power amplifier and the voltage of the speaker connection terminal are compared, and it is determined that short-circuiting occurs on a ground side when the potential of the speaker connection terminal is lower than the midpoint potential, a wrong test is conducted if a midpoint potential is higher than a battery voltage.

A system and method are disclosed to accomplish power savings in an electronic device, such as a memory chip, by performing selective frequency locking and subsequent instantaneous frequency switching in the DLL (delay locked loop) used for clock synchronization in the electronic device. By locking the DLL at a slow clock frequency, the operational frequency may be substantially instantaneously switched to an integer-multiplied frequency of the initial locking frequency without losing the DLL lock point. This DLL locking methodology allows for faster frequency changes from higher (during normal operation) to lower (during a power saving mode) clock frequencies without resorting to gradual frequency slewing to conserve power and maintain DLL locking. Hence, a large power reduction may be accomplished substantially instantaneously without adding complexity to the system clock generator. Because of the rules governing abstracts, this abstract should not be used in construing the claims.

A storage cell having a pulse generator and a storage element is proposed. The storage element input is connected to receive a data input signal. The storage element output is connected to provide a data output signal. The storage element is operable in one of a data retention state and a data transfer state in response to a storage control signal received from the pulse generator. The pulse generator is connected to receive a clock signal with rising and falling clock signal edges and is adapted to provide control pulses in the storage control signal. Each control pulse has a leading edge and a trailing edge. The control pulses have a polarity suited to invoke the data transfer state on their leading edges. The novel feature is that the pulse generator is adapted to initiate a rising-edge control pulse when receiving a rising clock signal edge and to initiate a falling-edge control pulse when receiving a falling clock signal edge. In this way, a dual-edge-triggered flip-flop may be made using only combinatorial logic circuitry and one level- or single-edge-triggered storage element. The storage cell has low power consumption, facilitates scan testing and can be used by existing design tools and test equipment.

A transistor being one of an IGBT and a MOSFET and arranged near a gate control circuit applies a gate control signal from the gate control circuit to the gate of a transistor arranged far from the gate control circuit. A gate control signal is applied via a resistive element to the transistor arranged near the gate control circuit.

A power package is provided comprising a packaged transistor and a driving unit connected to the transistor and adapted to drive the transistor. A control terminal of the transistor is connected to a middle terminal pin of the housing of the transistor and outer terminal pins of the housing are connected to the driving unit and to a voltage level, respectively, wherein the connections are crossing free.

A method of controlling an integrated circuit chip including first and second clock sources, the first clock source being more thermally stable and having a higher power consumption, the integrated circuit chip being operable in a first mode in which the first clock source is inactive and the second clock source active and in a second mode in which the first and second clock sources are active, the method including operating the integrated circuit chip in the first mode; taking a measurement indicative of temperature; if the measurement indicates that the temperature is outside of a temperature band: activating the first clock source so as to operate the integrated circuit chip in the second mode; recalibrating the second clock source against the first clock source; and following the recalibration, deactivating the first clock source so as to return the integrated circuit chip to the first mode.

A power management device of a touchable control system includes a boost circuit, a storage circuit, a detection circuit and a loading circuit. The boost circuit has an output terminal and generates an output voltage. The storage circuit electrically connects to the output terminal of the boost circuit and stores the output voltage. The detection circuit electrically connects to the storage circuit so as to detect the output voltage. The loading circuit electrically connects or disconnects to the output terminal of the boost circuit according to a predetermined value of the output voltage.

A semiconductor apparatus is provided herein for reducing power when transmitting data between a first device and a second device in the semiconductor apparatus. Additional circuitry is added to the semiconductor apparatus to create a communication system that decreases a number of state changes for each signal line of a data bus between the first device and the second device for all communications. The additional circuitry includes a decoder coupled to receive and convert a value from the first device for transmission over the data bus to an encoder that provides a recovered (i.e., re-encoded) version of the value to the second device. One or more multiplexers may also be included in the additional circuitry to support any number of devices.

A solar power inverter having a sealing means includes: a main case having an opening on a front surface thereof, the opening open and closed by a main cover; an auxiliary case coupled to one side surface of the main case, and having a second opening on a front surface thereof, the second opening open and closed by an auxiliary cover; and a gasket interposed between the main case and the auxiliary case, wherein the main case and the auxiliary case are coupled to each other by coupling bolts which pass through the main case, the gasket and the auxiliary case.

A heavy vehicle door or ramp is opened and closed using an intuitive control system. The door includes a latch assembly, a lock assembly, and a power unit to assist in opening and closing the door. The door includes an interior joy stick handle and an exterior lever handle. From outside the vehicle, the door is opened and closed by pivoting the lever handle downwardly and upwardly, respectively. From the interior of the vehicle, the joy stick handle is pulled inwardly to close the door and pushed outwardly to open the door. Pivoting the joystick handle forwardly engages the blast locks, while pivoting the joystick handle rearwardly unlatches the latch assembly and disengages the blast locks. The power assist unit is actuated by pivotal movement of the outside door handle and lateral pivotal movement of the interior joystick handle.

Provided is a small-sized propeller windmill which can efficiently generate power even when a wing speed is low, has no possibility that the windmill is broken even when a strong wind blows, can stably ensure a weathercock direction of a base blade, and can suppress an environmental burden, in such a propeller windmill, the blade having a corrugated wing shape is supported in a cantilever manner by way of an elastic body, and the blade and the elastic body are made of paper or plastic. Further, to stably ensure the weathercock. direction of the base blade, a weathercock stabilizing mechanism is arranged behind the base blade.

A power converter is configured to include an inverter which converts a DC output into an AC voltage of a predetermined frequency, and a high voltage generator which receives an output from output terminals of the inverter and boosts the output to a desired high DC voltage. The high voltage generator includes a transformer, and the primary windings of the transformer are connected to the output terminals of the inverter in parallel by conductive wires connected to both ends of each primary winding. Further, a current sensor is provided to detect a current flowing through each of the primary windings, and a control unit determines abnormalities of a path of the inverter and the primary windings on the basis of a value of the current sensor.

This invention is a wearable, automatic, and tamper-resistant device and method for monitoring and measuring food consumption and caloric intake. It can help people to manage their energy balance and weight. It can be embodied as: (a) one or more automatic-imaging members that are worn on a person from which these members collectively and automatically take pictures of the person's mouth and pictures of a reachable food source when the person eats; (b) a tamper-resisting mechanism which detects and responds if the operation of the one or more automatic-imaging members is impaired; and (c) an image-analyzing member which automatically analyzes pictures of the person's mouth and pictures of the reachable food source in order to estimate the types and quantities of food that are consumed by the person.

A communication device and a power control method thereof are provided. The power control method, performed by a communication device, includes: determining a power range of a transmit power of an uplink signal; determining a gain switch range based on the power range; when the transmit power of the uplink signal is within the gain switch range, determining a first gain mode for amplifying the uplink signal; and when the transmit power of the uplink signal is out of the gain switch range, determining a second gain mode for amplifying the uplink signal.

A display device includes: a pixel area comprising pixels in rows and columns; main power lines at a first side of the pixel area and a second side of the pixel area facing the first side; first sub-power lines coupled to a first main power line of the main power lines formed at the first side and extending into the pixel area in a column direction; and second sub-power lines coupled to a second main power line of the main power lines formed at the second side and extending into the pixel area in the column direction, wherein the first sub-power lines and the second sub-power lines extend in different columns of pixels, and wherein a column of pixels of the pixels are alternatingly coupled to a neighboring sub-power line of the first sub-power lines and a neighboring sub-power line of the second sub-power lines.

A power supply apparatus includes a converter to convert AC power into DC power, an SMPS to convert the DC power into DC powers desired by loads, a capacitor to interconnect the converter and the SMPS, a PTC element connected to the converter, a first switch connected in parallel with the PTC element, and a second switch connected in series with the first switch. The method includes turning on the second switch to start charging of the capacitor, turning on the first switch to charge the capacitor to a target voltage level, and turning off both the first switch and second switch if a voltage across the capacitor rises over the target voltage level, to discharge the voltage across the capacitor so as to lower the voltage across the capacitor to the target voltage level or lower.

A method for charging an assembled battery including series circuits connected in parallel, each of the series circuits including series-connected lead storage batteries, using a single charger is provided. The method includes: a first step of obtaining a first index value, corresponding to a resistance value of a first series circuit with a correlative relationship, the first series circuit having a lowest resistance value; a second step of obtaining a second index value corresponding to a resistance value of a second series circuit with a correlative relationship, the second series circuit having a highest resistance value; a third step of performing normal charging, in which the assembled battery is charged with a first amount of charge corresponding to the first index value; and a fourth step of performing refresh charging, in which the assembled battery is charged with a second amount of charge corresponding to the second index value.

A direct feeding apparatus for impedance matching of a wireless power transmission device includes a helical type resonator, and a feeding unit configured to directly feed power to a region having a relatively small current value as compared to a center of a conductive line of the resonator.

An electric power tool is included in a plurality of types of electric power tools. The plurality of types of electric power tools comprise a plurality of types of battery packs having different rated output voltages and a plurality of types of tool bodies, the housings of which are equipped with an attached part on which each of the battery packs is mounted in a freely removable manner. The attached part possessed by the plurality of types of tool bodies equipped with motors having different voltage characteristics is formed so as to be able to mount an arbitrary one of the plurality of types of battery packs having different rated output voltages. This makes it possible to widen the range of available battery packs and enhance convenience.

A portable solar power supply includes a solar-powered charger including a solar cell; a circuit board including a power management unit, a buck-boost converter unit, a charging control unit, a data management unit, an on/off switch, a set of indicators, a power inlet, a power outlet, a first connector, a wireless communications member, a line transmission member, a data storage member, an RFID member, an SD card member, a USB port, a Micro USB port, and a solar charging member; and holes; and a rechargeable battery including at least one electrochemical cell each shaped to partially contain the solar-powered charger and including a second connector, a third connector, snapping members, and slots. The second connector is capable of connecting to the first connector or the third connector, and the snapping members are capable of being retained in the holes or the slots.

A system and method for digital management and control of power conversion from battery cells. The system utilizes a power management and conversion module that uses a CPU to maintain a high power conversion efficiency over a wide range of loads and to manage charge and discharge operation of the battery cells. The power management and conversion module includes the CPU, a current sense unit, a charge/discharge unit, a DC-to-DC conversion unit, a battery protection unit, a fuel gauge and an internal DC regulation unit. Through intelligent power conversion and charge/discharge operations, a given battery type is given the ability to emulate other battery types by conversion of the output voltage of the battery and adaptation of the charging scheme to suit the battery.

A system for protecting a power consuming circuit, the system comprising two terminals for receiving power and two terminals for providing received power. Between one of the receiving terminals and a providing terminal, a transistor is provided which is controlled by a Zener diode and to break the connection between one of the receiving terminals and a providing terminal, if a voltage over the providing terminals or the receiving terminals exceeds the breakdown voltage of the Zener diode.

An electric power supply system includes a connecting device that connects a secondary battery provided in a vehicle to a building, and a control apparatus that i) identifies the type of the vehicle that is connected to the connecting device, the type of the secondary battery, or the type of electric power that is distinguishable by the charging source of the electric power stored in the secondary battery, ii) determines a preset electric power supply method based on the identification results, and iii) controls a supply of electric power from the secondary battery to the building based on the determined electric power supply method.

A method for scheduling a charge of a plug-in electric vehicle (PEV) includes receiving, by a load management system, PEV information from a PEV plugged into an electric vehicle supply equipment (EVSE); transformer information from a transformer management system, the transformer information relating to a transformer associated with the EVSE; determining, by the charging information based on the PEV information and transformer information; providing the charging information to the PEV.

A discharge device actively discharges a main capacitor in an electric-power system of an electric-drive vehicle and comprises a discharge branch of a circuit connected in parallel to the capacitor and including a discharge transistor biased to “conduction” mode when the capacitor must be discharged. A control device is connected to a “gate/base” terminal of and controls the transistor, biasing the transistor to the mode when the capacitor is required to fee discharged. A control transistor maintains the discharge transistor in a “non-conductive” state when the control transistor is in the mode. The control transistor is in the state for the discharge transistor to be in the mode. A safety capacitor is interposed between the terminal and a power supply and charges when the discharge transistor is in the mode, causing a progressive decrease of current at the terminal, until the discharge transistor is biased to the state.

A method includes steps of dividing resistance R into a physical and chemical resistances Ro and Rp, obtaining corrected open-circuit voltages Vo corresponding to setting currents Ia to Ix, acquiring predicted reaching voltages Va to Vx corresponding to the setting currents Ia to Ix, and creating a current-voltage curve. The corrected open-circuit voltages Vo are obtained to predict available maximum currents I—target in a particular time t2. The predicted reaching voltages Va to Vx are acquired based on corrected physical and chemical resistances Ro and Rp, and the corrected open-circuit voltages Vo. The current-voltage curve is creased based on the setting currents Ia to Ix and the predicted reaching voltages Va to Vx to acquire upper and lower limit voltages Vmax and Vmin, and upper and lower limit currents Imax and Imin at a temperature whereby assigning these limit currents to available maximum currents I—target in charging and discharging operations, respectively.

Starting and stopping an engine is automatically controlled based on a load without using a relay. An inverter engine-driven power generator has an alternator, a rectifying circuit, a DC/DC converter, and an inverter circuit. A load detection circuit is connected to an output of the inverter circuit in parallel. A load detection line of the load detection circuit is connected to an output line of the inverter circuit in parallel via resistors. A power supply formed of a battery is connected to the load detection line. A decision circuit outputs a load detection signal when a current having a preset value or more flows through the load detection line. A drive/stop CPU starts the engine in response to the load detection. The resistors are set at a resistance value which does not influence a load to which a generator output is supplied.

The present embodiments provide a control system and method that is able to automatically start and/or stop a portable engine-driven power source. For example, in one embodiment, a system includes an engine-driven power source having an engine, a compressor driven by the engine, a sensor configured to generate a first signal indicative of a demand for air pressure from the compressor and a second signal indicative of no demand for air pressure from the compressor. The engine-driven power source also includes a controller configured to stop the engine in response to the second signal.

A wind power generator generates power through a rotation of a rotor and is interconnected, and operated with its power generation output previously limited in order to be able to further supply the power to a power system in response to a decrease in system frequency. Thus, a concentrated control system derives a required restricted amount corresponding to a power generation output required to respond to the decrease in system frequency, derives a value by subtracting an amount corresponding to a latent power generation output with which the power generation output can be increased, from the required restricted amount, and sets a restricted amount of the power generation output in each wind power generator to perform the operation with the power generation output previously limited to respond to the decrease in system frequency, based on the above value.

A wind energy plant comprising a rotor having blades and a generator driven by said rotor for generating electric energy. The pitch of the blades can be adjusted and a pitch system for adjusting the pitch angle of the blades is provided, which is supplied by a hub power source. An additional electric load is provided on the hub. A pitch power control device is provided which dynamically distributes the power of the hub power source between the pitch system and the additional electric load and further acts on the pitch system such that its power consumption during high-load operation is reduced. Thus, the power consumption of the pitch system during high-load operation can be reduced and additional power provided for operating the additional load. Even large additional loads, such as a blade heater, can be operated in this way, without having to boost the hub power source.

An electric power generation system (EPGS) employs both a wild-source generator and a variable and/or constant frequency generator. The wild-source generator is coupled to receive mechanical power from a low-pressure spool on an aircraft engine and to generate in response a wild-source output for consumption by voltage and frequency-tolerant loads. The variable and/or constant frequency generator is coupled to receive mechanical power from a high-pressure spool on the aircraft engine and to generate in response a variable and/or constant frequency output for consumption by voltage and frequency-intolerant loads.

An integrated power system suitable for simultaneously powering marine propulsion and service loads. The system includes: (a) at least one generator configured with at least first and second armature windings configured to output respective first and second alternating current power signals of different voltages, the at least two armature windings positioned within the same stator slots so that they magnetically couple; (b) at least first and second rectifier circuits coupled to said generator to convert said first and second alternating current power signals into first and second direct current power signals; and (c) a first load to which said first direct current power signal is coupled and a second load to which said second direct current power signal is coupled.

An on-demand electric power system for providing on-demand electric power in remote locations. The on-demand electric power system generally includes a protective housing, an engine-generator within the protective housing, a control switch electrically positioned between the engine-generator and an electric load, and a control unit in communication with the engine-generator and the control switch to control operation of the engine-generator along with electrical power to the electric load. The control unit detects when electrical power is required by an electric load and then first starts the engine-generator. After a period of time, the control unit then closes the control switch to provide electrical power to the electric load.