We prove that all non-degenerate relative equilibria of the planar Newtonian $n$--body problem can be continued to spaces of constant curvature $kappa$, positive or negative, for small enough values of this parameter. We also compute the extension of some classical relative equilibria to curved spaces using numerical continuation. In particular, we extend Lagrange's triangle configuration with different masses to both positive and negative curvature spaces.

In this paper, we present three distributed algorithms to solve a class of generalized Nash equilibrium (GNE) seeking problems in strongly monotone games. The first one (SD-GENO) is based on synchronous updates of the agents, while the second and the third (AD-GEED and AD-GENO) represent asynchronous solutions that are robust to communication delays. AD-GENO can be seen as a refinement of AD-GEED, since it only requires node auxiliary variables, enhancing the scalability of the algorithm. Our main contribution is to prove converge to a variational GNE of the game via an operator-theoretic approach. Finally, we apply the algorithms to network Cournot games and show how different activation sequences and delays affect convergence. We also compare the proposed algorithms to the only other in the literature (ADAGNES), and observe that AD-GENO outperforms the alternative.

Moving a module in a modular robot is a very complex and error-prone process. Unlike in swarm, in the modular robots we are targeting, the moving module must keep the connection to, at least, one other module. In order to miniaturize each module to few millimeters, we have proposed a design which is using electrostatic actuator. However, this movement is composed of several attachment, detachment creating the movement and each small step can fail causing a module to break the connection. The idea developed in this paper consists in creating a new kind of deformable module allowing a movement which keeps the connection between the moving and the fixed modules. We detail the geometry and the practical constraints during the conception of this new module. We then validate the possibility of movement for a module in an existing configuration. This implies the cooperation of some of the modules placed along the path and we show in simulation that it exists a motion process to reach every free positions of the surface for a given configuration.

What Is Real-Time Conversation Analytics?

In contrast to post-call conversation analytics, which provides insights after the fact, real-time call conversation analytics can point them out at present times.

In this blog, I will walk through the essential steps to build a web app that can analyze call conversations in real-time to assist an agent. Once we’re finished, we’ll have an app which will:

Techniques for evaluation and/or retraining of a classification model built using labeled training data. In some aspects, a classification model having a first set of weights is retrained by using unlabeled input to reweight the labeled training data to have a second set of weights, and by retraining the classification model using the labeled training data weighted according to the second set of weights. In some aspects, a classification model is evaluated by building a similarity model that represents similarities between unlabeled input and the labeled training data and using the similarity model to evaluate the labeled training data to identify a subset of the plurality of items of labeled training data that is more similar to the unlabeled input than a remainder of the labeled training data.

Augmented processor hardware contains a microcode interpreter. When encrypted microcode is included in a message from a service, the microcode may be passed to the microcode interpreter. Based on decryption and execution of the microcode taking place at the processor hardware, extended functionality may be realized.

An improved method for program building uses predefined source files and predefined build scripts comprising a sequence of build commands; wherein each build command comprises an origin command line interpretable by an operating system and addressed to at least one compiling tool.

An apparatus and method for determining an Absolute Location of an indoor stationary object, the method comprising: receiving a distance between an indoor stationary object and one or more predetermined spots; determining a location of stationary object relative to one of the predetermined spots; receiving an Absolute Location of one of the predetermined spots; determining an Absolute Location of the stationary object; and storing the Absolute Location of the stationary object with description information of the stationary object.

The use of ferric hydroxycarboxylate as a chelator and builder for cleaning compositions is disclosed. The cleaning composition may be formulated for warewashing, laundering, and for other means of removing soils and includes a ferric hydroxycarboxylate, an alkalinity source and a surfactant system. The cleaning composition has a pH of between about 9 and about 12.

The present application relates to compositions comprising at least one siloxane and at least one superplasticizer based on polycarboxylate ethers or sulphonates of lignin, melamine or naphthalene or of resins thereof, and to the use of such compositions as or in building-product mixtures or building products, especially mortar mixtures or concrete mixtures. Preferably the siloxane is a branched siloxane containing at least one “T” unit and containing at least two different polyoxyalkylene moieties.

Systems and methods are disclosed for analyzing building sensor information and decomposing the information therein to a more manageable and more useful form. Certain embodiments integrate energy-based and spectral-based analysis methods with parameter sampling and uncertainty/sensitivity analysis to achieve a more comprehensive perspective of building behavior. The results of this analysis may be presented to a user via a plurality of visualizations and/or used to automatically adjust certain building operations. In certain embodiments, advanced spectral techniques, including Koopman-based operations, are employed to discern features from the collected building sensor data.

A method of providing data included in a building information modeling (BIM) data file using a server is provided. The method includes retrieving mapping data corresponding to a user request, extracting data corresponding to at least one entity mapped to the mapping data from the BIM data file, and transmitting the extracted data to a client.

A heat exchange and ventilation system integrated with a hollow core concrete floor having an air passage therethrough with an inlet and outlet for receiving air and permitting relative heat exchange therebetween; a raised floor supported by said hollow core concrete floor, defining a floor plenum between said hollow core concrete floor and said raised floor, said floor plenum communicating with said outlet so as to receive air from said air passage through said hollow core concrete floor; and adjustable terminal means carried by said raised floor for delivering a portion of said air from said floor plenum into a space above said floor. A method of conditioning air through a hollow core medium supporting a raised floor is also disclosed.

An unmanned aircraft, unmanned aviation system and method for collision avoidance during the flight operation of an unmanned aircraft are provided. The unmanned aircraft includes a lift and propulsion system and a flight control system having a flight control unit, a navigation system and an actuator system. The flight control unit has an autopilot unit. The flight control unit calculates control commands using data from the navigation system and/or the autopilot unit, which can be conveyed to the actuator system for actuating the lift and propulsion system. A collision warning system is connected with the flight control system, the collision warning system detects a collision situation and makes collision avoidance data available. A connection between the collision warning system and the autopilot unit is provided, in order to initiate an obstacle avoidance maneuver by the autopilot unit with the help of the collision avoidance data.

A building block (100) comprises a first mating portion and a second mating portion which are complementary. The first mating portion comprises a mating protrusion (140) which defines an axially extending through bore (144) and the second mating portion comprises an axially extending mating receptacle (180) which is complementary to the mating protrusion (140). The mating protrusion (140) and the mating receptacle (180) are in communication via the through bore (144), and a fastener anchoring device (146) adapted for engaging with an engagement means (920) of a fastener (900) is formed inside the through bore (144). The through bore (144) is adapted to permit axial insertion of the engagement means (920) of the fastener (900) into the mating protrusion (140). The fastener anchoring device (146) is adapted to obstruct axial passage of the engagement means (920) until the engagement means (920) overcomes the obstruction by negotiating rotationally with the fastener anchoring device (146) to thereby gain axial advancement and enter into engagement with the fastener anchoring device (146).

A simplified modularized contact type of conductive building block includes: a brick, at least one pair of conductive pieces, a circuit board and a base. The brick includes at least one pair of studs projected from a top thereof. The conductive piece has an insertion electrode and a connection electrode respectively disposed at two ends thereof and a contact electrode disposed between the insertion electrode and the connection electrode. The conductive pieces are inserted through the insertion through holes of the circuit board. The circuit board includes a positive electrode circuit and a negative electrode circuit respectively contacted with the at least one pair of the conductive pieces. The conductive pieces are further inserted through the through holes of the base. The circuit board and the base are fixed in the brick.

A toy building block (1) for stacking is provided on top (4) with one or more studs (3) and in the bottom (7) with recesses (6). The studs (4) show a toothwheel-like cross-section with rounded teeth crests (12) and rounded grooves (10) between the teeth (12) as well. The recesses (6) are provided each with a number of vertically extending lands (14) matching in shape the grooves (10). The studs easily slide in and out of the recesses (6), yet a rotational arretation of low play is obtained. Preferably, the building blocks are produced by a blowing process and may be provided with screws (21) for a safe interconnection. External slots (46) may allow the combination with panels (47) bearing images, additional functional elements etc.

An improved set of toy building or construction blocks, each block having a substantially square cross-section and a generally rectilinear configuration. Incorporated into the structure of the individual toy blocks are transversely oriented slots, grooves and protrusions of predetermined size and location. The slots, grooves and protrusions of pre-determined size and location are of either male or female configuration disposed medially along one or more plane of each block. When the male protrusion of one block is introduced perpendicular to the female slot of one end of another block, a frictional engagement is created resulting in a right angle. When the male protrusion of one block is introduced to the female slot in a linear fashion the result is a line segment. Joining a plurality of said toy building or construction blocks using various perpendicular connections in conjunction with linear connections results in the stable formation of construction or geometric structures without the use of fasteners or other connecting elements.

A modular building set having a plurality of interlocking members comprising a plurality of planks and a plurality of posts. The planks each comprise a central plank member having two pairs of opposing recesses and four pairs of opposing parallel bars with two pairs of bars located equidistant one another on either the recesses. The posts each comprise a central post member with a pair of opposing central recesses depending from the upper and lower edges. The posts each have two pairs of opposing bar members with one set of bar members between the opposing central recesses and a first end a post, and another set of bar members between the opposing central recesses and a second end opposite said first end. The plank and/or post members interlockably engage one another by joining a recess of a first member with the recess of the second member.

An interlocking toy block set may include at least two blocks with at least one constraining groove formed in a surface of each of the at least two blocks. At least one connector may have at least two attachment members formed thereon. The attachment members may have a cross-sectional shape corresponding to a cross-sectional shape of the constraining grooves.

A building structure including a first building member and a second building member may be connected by a plurality of fasteners, each fastener having a head, a threaded portion having a through hardness of between HRB 70 and HRC 40, a thread-forming portion of at least HRC 50 hardness enabling the fastener to form threads in at least the second steel building member, and a fluted lead portion of at least HRC 50 hardness with a nominal diameter between 70 and 95% of major diameter, such that the fastener is capable of providing a ratio of strip torque to thread-forming torque of at least 2.7 and a ratio of strip torque to drive torque greater than 6.0 when the second steel building member having a thickness of 0.25 inch and the fluted lead portion having at least one diameter within nominal diameter between 80 and 98% of major diameter.

A game apparatus and a method using trays as the game board with vertical support columns, two sets of playing pieces and two launching devices. The one or more vertical support columns attach to the one or more trays to support the trays horizontally above a support surface. On the surface of each of the trays is a matrix and each element of the matrix has a recessed compartment orthogonal to the surface of the tray. Each recessed compartment is sized to hold a multiplicity of both types of playing pieces in a stacked manner. The recessed compartments may also be created so that the order and the number of the playing pieces in each recessed compartment are observable for additional variety in game play.

The present disclosure relates to an electric field emission x-ray tube apparatus equipped with a built-in getter, and more particularly, to an electric field emission x-ray tube apparatus equipped with a built-in getter that makes it possible to reduce the size of an x-ray tube by forming a stacked structure, with electric insulation and predetermined gaps maintained for each electrode, by manufacturing an x-ray tube having a stacked structure by inserting insulating spacers (for example, ceramic) between an exhausting port, a cathode, a gate, a focusing electrode, and an anode and bonding them with an adhesive substance, and then inserting a spacer between a field emitter on a cathode substrate and a gate hole connected with a gate electrode.

The team-building educational training system includes a mat and a plurality of reflective surfaces, such as mirrors. The mat has a top surface, a bottom surface, and a plurality of openings defined therein. The top and bottom surfaces each have a plurality of uniquely identifiable indicia displayed thereon. The reflective surfaces are placed on the floor or ground under the mat. The team cooperatively lifts and manipulates the mat to align the openings with the reflective surfaces so that at least one team member can view reflections of the indicia on the reflective surfaces. The team cooperatively interprets the indicia and completes a variety of planned exercises to learn skills for working as a team.

In one embodiment, a viewer executing on an electronic device having a touch sensitive display shows a three-dimensional (3D) model of a building created using computer aided design (CAD) software. A plurality of selectable interface nodes are provided at respective locations within the 3D model. Each interface node is linked to at least one corresponding two-dimensional (2D) construction drawing that shows a section view, a plan view, an elevation view or a detail view of the building related to the location of the interface node. In response to receiving input from a user indicating selection of a particular interface node, a menu is displayed with one or more selectable menu options. In response to receiving additional input from the user indicating selection of a particular menu option, a corresponding 2D construction drawing for the particular interface node is displayed in context of the 3D model of the building.

A mobile power pack includes a cover over a guide track which includes first, second, third, and fourth turning points. A sliding block defines a sliding groove to receive a ball, and the slotted ball interacts with the guide track. An elastic element is connected to the sliding block. When a cable is pulled out, the sliding block slides from the first turning point to the second turning point. When the pull on the cable is released, the elastic element restores to cause the sliding block to move until the ball reaches the third turning point, to lock the cable in position. When the cable is pulled and released, the sliding block slides until the ball reaches the fourth turning point, allowing the cable to be retracted into the body of the power pack.

The building heat exchange system is suited for installation in areas having warmer seasonal climates. The system can include an external solar heated water supply, and an indoor water heater. An enclosure extends around the water heater, with indoor air flowing between the enclosure and water heater to a duct for distribution. During cooler conditions the water heater heats incoming water from the relatively cool external water supply, with the warmth of the water heater warming the air for distribution into the bathroom or other area as desired. In warmer times, the water supplied from the water supply can be sufficiently hot that additional heating is not needed, and can be hotter than desired. In such warmer conditions, the water heater can serve as a radiator, with heat radiated from the water heater being absorbed by air flowing past the water heater and expelled to the external environment.

The present invention relates to utility surfaces. Specifically, the invention relates to a utility surface, generally a table or other flat surface, with drawers attached to the utility surface. In preferred embodiments of the present invention, the utility surface and attached drawers may be folded into a collapsed format that is convenient for portability.

A quilting needle for achieving substantially uniform stitches in a multi-layer fabric/batten quilting substrate. The needle is formed as an elongated straight slender needle body having an eyelet at one end thereof sized for receiving a quilting thread therethrough and a sharp quilting fabric piercing point at another end of the needle body. A viewable stitch size guide is permanently disposed on the needle body so as not to disrupt the smooth needle body surface and is positioned from the point a distance equal to a desired stitch size. Successive stitches formed into the substrate of uniform size or length when the needle body is consistently pierced through the substrate to a depth defined when said stitch size guide just touches or meets and aligns with an obverse surface of the substrate before piercing the point into a reverse surface of the substrate to complete each stitch.

The present invention relates to a building panel. The building panel includes a core including first geopolymer concrete. One or more protective layers are located adjacent the core. Each protective layer includes second geopolymer concrete of greater density than the first geopolymer concrete. In one embodiment, passages are defined along which air can move within the core.

An optical lens mold includes a mold body, a magnetic fluid, a plurality of thermocouples, a plurality of electromagnets, a controlling unit and a power source. The mold body defines a plurality of injection chambers and a cooling channel surrounding the plurality of injection chambers. The magnetic fluid contains magnetic particles and flows in the cooling channel. The thermocouples are capable of sensing temperatures of the plurality of injection chambers correspondingly. The electromagnets are positioned above the cooling channel corresponding to the plurality of thermocouples. The plurality of thermocouples and the plurality of electromagnets are connected to the controlling unit via the power source, the controlling unit is capable of the comparing the standard temperature value with temperature values sensed by the plurality of thermocouples, and maintaining the temperature of the plurality of injection chambers in a normal state.

A sealing assembly for securely and insulatively maintaining a window or door and surrounding frame arrangement within an opening of a building wall. The sealing assembly comprises an elongated foam cell body member arranged within a channel of the surrounding frame arrangement of the window or door, wherein the elongated cell body member has a wall-opening-facing side. An elongated caulking band flange member is arranged in abutting relationship with a corner of the elongated foam cell body member. A thin flexible air fin is arranged in close environmental sealing relationship with the elongated foam cell body member and the opening in the wall of the building. A securement member is arranged to fasten the window or door surrounding frame arrangement, the elongated foam cell body member and the air fin, all to the building wall opening.

A method directed to reducing mineral buildup on drift eliminators of a cooling tower by allowing irrigation of the drift eliminators of the cooling tower with fluid in the basin of the cooling tower to reduce mineral buildup.

Provided a build-up welding material which contains C: 0.2 to 1.5 mass %, Si: 0.5 to 2 mass %, Mn: 0.5 to 2 mass %, Cr: 20 to 40 mass %, Mo: 2 to 6 mass %, Ni: 0.5 to 6 mass %, V: 1 to 5 mass % and W: 0.5 to 5 mass %, with the balance being Fe and unavoidable impurities.

A louver display panel system with a display panel for receiving printed or graphic material thereon, a support member to secure the display panel to a building or structure, and a louver movement control means. The display panel is rotationally secured to the support member and forms a louver structure. The louver movement control means maintains the display panel in a first position in a plane generally parallel to the exterior face of the building or structure until a wind load applied to the display panel exceeds a pre-determined value, after which the louver movement control means permits the display panel to rotate toward a second position generally parallel to the direction of the wind to reduce the wind load borne by the display panel. The louver movement control means returns the display panel to its first position when the wind load drops below said pre-determined value.

One embodiment of the present invention relates to a machine for sewing, embroidering, quilting and/or the like. Another embodiment of the present invention relates to a method for sewing, embroidering, quilting and/or the like. In one example, the present invention may be applied (e.g., as a machine and/or method) to a multi-needle machine or method. In another example, the present invention may provide for automatic lower (or bottom) thread cutting. In another example, the present invention may provide for automatic lower (or bottom) thread cutting by utilizing the phase (that is, movement phase) of a return of a looper (or hook) to cut the lower (or bottom) thread.

Systems and methods for creating quilt blocks are provided. In one embodiment, a method for creating a quilt block with a computerized embroidery machine includes sewing placement stitching on a backing according to a placement stitching pattern provided by instructions for at least partially creating a quilt block comprised of one or more pieces, providing directions for placing one or more pieces of the quilt block on a corresponding portion of the placement stitching on the backing, and sewing the one or more pieces to the backing in accordance with the instructions.

A digitizer is operably coupled to a quilting machine controller, wherein an operator can input free hand or traced patterns for regulating operation of a sewing head. The digitizer can be an X-Y encoder wherein the encoder includes a transparent or translucent sensing zone which provides for the operator to input a pattern while simultaneously viewing a portion of a textile, which can itself include a pattern.

A plant for building tires for vehicle wheels, includes at least one forming drum having a supporting shaft axially projecting from opposite sides relative to a central body. A handling device is adapted to engage the forming drum and transfer it between at least one loading/unloading location and a work location provided for carrying out at least one process working on the forming drum. The handling device includes a grip assembly carrying at least two grip members each engaging the supporting shaft in the vicinity of each of the end portions thereof, and at least one motor associated with at least one of said grip members for driving the forming drum in rotation while the at least one process working is being carried out in the work location.

A drying apparatus for temporary location within a damp or waterlogged room is disclosed. The apparatus includes sensors to sense the level of temperature and humidity within the room, a heater to provide heat for the room, an air circulation fan for selectively circulating heated air within the room or selectively exhausting warm and humid air from the room and for allowing outside ambient air into the room. The apparatus being adapted to cyclically continue until the sensed humidity reaches a required level, the apparatus thereafter indicating, directly or indirectly, the completion of the drying process. A method of drying a room using such apparatus is also disclosed which employs a technique whereby the rate of change of the temperature increase is used to determine when humid air should be exhausted from the room. A time limit can also be use to determine when said exhausting takes place.

A vertical quilt basting frame (100) enables an improved quilting experience. The frame (100) includes four frame members (105, 110, 115, 120) defining a rectangle. At least one leg member (125) extends from at least one of the frame members (105, 110, 115, 120). A plurality of fabric side panels (150, 155, 160, 165) are attached to each of the four frame members (105, 110, 115, 120), wherein the fabric side panels (150, 155, 160, 165) define a workspace window (170) inside of the rectangle.

A rebuildable conveyor roller includes a hollow, cylindrical roller tube having a first end opposite a second end. The roller tube has a rebuildable conveyor roller bearing assembly provided at the first end and the second end. The rebuildable conveyor roller bearing assembly is affixed to the roller tube such that at least a part of the rebuildable conveyor roller bearing assembly is removable from the roller tube. A hub of the rebuildable conveyor roller bearing assembly has a generally circular shape that is dimensioned to fit inside the internal diameter of the roller tube. The hub has a centrally located hole through which a stub shaft may be inserted. A bearing holder is inserted in an internal cavity provided within the hub for securing the rebuildable conveyor roller bearing assembly to the roller tube.

A digital manufacturing system comprises a build chamber, a build platform disposed within the build chamber, at least one extrusion line configured to heat a metal-based alloy up to a temperature between solidus and liquidus temperatures of the metal-based alloy, a deposition head disposed within the build chamber and configured to deposit the heated metal-based alloy onto the build platform in a predetermined pattern, an umbilical having a first end located outside of the build chamber and a second end connected to the deposition head, and at least one gantry assembly configured to cause relative motion between the build platform and the deposition head within the build chamber, where the at least one gantry assembly comprises a motor disposed outside of the build chamber.

An improved apparatus for treating a fire in a multi-floored building where the fire is located on an upper floor vertically displaced from a lower floor from which the fire is treated, and where the upper and lower floors each have a selectively openable environmental access along an external wall of the multi-floored building. The improved apparatus includes a tubular structure having an inlet, an intermediate portion, and an outlet and a bracing system. The bracing system has a frame, a first pivot point, and a second pivot point. The frame provides support against a sturdy surface. The tubular structure is supported on the first pivot point and rotates thereon to elevate or hoist the outlet towards the upper floor environmental access. The tubular structure is further supported on a second pivot point and further rotates thereon to elevate the outlet.

A build up edge monitoring method is provided for performing online real-time detection and suppression of abnormal build up edges of cutters occurred in a CNC manufacturing process. Signal variation analysis and fast Fourier transform are used for analyzing signals and establishing an algorithm of diagnosing build up edges to improve the efficiency and reliability of the cutting abnormality diagnostics. A vibration acceleration signal is captured and filtered to a frequency exceeding 1.1 times of a blade passing frequency, and an occurrence of accumulated chips is determined according to a sudden increase of the vibration acceleration and whether the main vibration frequency of the current vibration signal determined by a fast Fourier transform analysis matches with the frequency of the build up edge characteristic, and a shutdown instruction is issued to a CNC controller to shut down a cutting machine.

An electronic device is provided with an inclination sensor for computing inclination, a control unit which conducts predetermined control based on a value computed by the inclination sensor, a case which has the inclination sensor and the control unit therein, and a suspension portion for suspending the case, and the control unit controls correction of the reference value of the inclination sensor based on a state where the case is suspended by the suspension portion and still.

A system and a method for providing a query building logic for supporting testing requirements are disclosed. The system receives one or more business inputs from one or more users. An application database is configured for rendering one or more unique database schemas and a set of predefined parameters. The application database is accessed by at least one user to select one or more database schemas and identify a set of predefined parameters, based on one or more business conditions set for the at least one user. Further, the system comprises a TDS (Test Data Specification) framework that is configured to dynamically frame one or more queries based on one or more business inputs, selected database schemas and the identified predefined parameters by the one or more users.

A covering of a building opening includes a rail, a first sash having a guiding slot, a second sash hinged with the first sash and having a center of rotation at an end thereof, a pulley assembly, and a restricting assembly. The pulley assembly is movably received in the rail and has a rod. The rod has a protrusion section extending out of the rail, and the protrusion section enters and leaves the guiding slot while the pulley assembly is moving. The restricting assembly has a moving member and a locking base. The moving member is provided on one of the first sash and the second sash, and the locking base is provided on the other. The moving member is moved by the rod and engages the locking base when the rod leaves the guiding slot.

A hanger for a sash of a window to detachably engage the sash with a rail of the window, and the hanger includes a pulley assembly and a restricting assembly. The pulley assembly has a base and a plurality of pulleys mounted on the base for rotation. The pulleys engage the rail so that the pulley assembly moves in the rail. The base is provided with a slot. The sash is provided with a rod. The rod engages the slot of the pulley assembly to engage the sash with the rail, and the rod leaves the slot via a lateral opening thereof while the covering rotates for a predetermined angle. At this time, the sash is disengaged with the rail to be moved off the window.