abi

CrysGraphFormer: an equivariant graph transformer for prediction of lattice thermal conductivity with interpretability

J. Mater. Chem. A, 2024, 12,30707-30721
DOI: 10.1039/D4TA04495A, Paper
Zhengyu Sun, Weiwei Sun, Shaohan Li, Zening Yang, Mutian Zhang, Yang Yang, Huayun Geng, Jin Yu
We propose an innovative GNN model, CrysGraphFormer, which accurately predicts lattice thermal conductivity and enhances insights for material discovery.
The content of this RSS Feed (c) The Royal Society of Chemistry




abi

A black zirconia cathode coating layer enabling facile charge diffusion and surface lattice stabilization for lithium-ion batteries

J. Mater. Chem. A, 2024, 12,30667-30675
DOI: 10.1039/D4TA05179C, Paper
Yoo Jung Choi, Sungbin Jang, Hongjun Chang, Youjin Kim, Suji Kim, Ga Yoon Kim, Juho Lee, Janghyuk Moon, Jinsoo Kim, Won-Hee Ryu
Black ZrO2−x is coated onto a Ni-rich cathode via solvent-free shearing, enhancing charge transfer, reducing gas evolution, and preventing cracking. It lowers Li-ion transfer barriers and mitigates oxygen release through strong Zr–O hybridization.
The content of this RSS Feed (c) The Royal Society of Chemistry




abi

A review on instability factors of mono- and divalent metal ion batteries: from fundamentals to approaches

J. Mater. Chem. A, 2024, 12,30190-30248
DOI: 10.1039/D4TA05386A, Review Article
Elmira Kohan, Roushan Khoshnavazi, Mir Ghasem Hosseini, Abdollah Salimi, Mehdi Salami-Kalajahi
Degradation phenomena in different components (cathode, anode, current collectors (CCs)) of mono- and divalent metal-based batteries affect their performance.
The content of this RSS Feed (c) The Royal Society of Chemistry




abi

Achieving dynamic stability of single-crystal low-Co Ni-rich cathode material for high performance lithium batteries

J. Mater. Chem. A, 2024, 12,30831-30841
DOI: 10.1039/D4TA04698F, Paper
Adil Saleem, Leon L. Shaw, Mehwish Khalid Butt, Javed Rehman, Arshad Hussain, Zawar Hussain, Rashid Iqbal, Muhammad Kashif Majeed
The demand for high-energy-density lithium-ion batteries (LIBs) has driven intensive research into cathode materials that exhibit both superior performance and stability over multiple charge–discharge cycles.
The content of this RSS Feed (c) The Royal Society of Chemistry




abi

Enhanced oxygen exchange kinetics and long-term stability of Ruddlesden-Popper phase Pr4Ni3O10+δ cathode for solid oxide fuel cells

J. Mater. Chem. A, 2024, Accepted Manuscript
DOI: 10.1039/D4TA01845A, Paper
Saim Saher, Affaq Qamar, Chou Yong Tan, Singh Ramesh, Walied Alfraidi
This research explores the intricacies of oxygen exchange kinetics in Pr4Ni3O10+δ (PNO), aiming to assess its potential as a viable cathode material for solid oxide fuel cell applications. Utilizing a...
The content of this RSS Feed (c) The Royal Society of Chemistry




abi

Regulating oxygen redox reactions in lithium-rich materials via an Al2O3-doped ZnO layer for enhanced stability and performance

J. Mater. Chem. A, 2024, Advance Article
DOI: 10.1039/D4TA06843B, Paper
Xinyu Cheng, Yuke Wang, Jia Lu, Wangqi Dai, Huanhao Lei, Jinning Zuo, Hong Li, Zhengwen Fu
An ultrathin Al2O3-doped ZnO (AZO) layer on LRM regulates oxygen redox by suppressing anion migration and inhibiting surface oxygen oxidation, enhancing cycling performance.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




abi

Efficient hydrogen isotope separation utilizing photocatalytic capability

J. Mater. Chem. A, 2024, Advance Article
DOI: 10.1039/D4TA07355J, Paper
Linzhen Wu, Sifan Zeng, Weiwei Wang, Shengtai Zhang, Hongbo Li, Xiaosong Zhou
An N–O–C3N4 catalyst for catalytic hydrogen isotope separation.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




abi

A rising prevalence of the use of items that include cannabis

Blogs What exactly does it imply when someone claims marijuana? There are three primary types of marijuana strains: indica, sativa, and hybrid Doing research on several strains of cannabis How marijuana is smoked or eaten affects how high one gets from using it   The number of individuals who are becoming aware of the potential […]




abi

Do you have any suggestions for items that contain cannabidiol

Content We are curious as to whether or not you have any suggestions What makes cbdMD’s product range stand This location has the highest-quality CBD oil available for canines The use of CBD products comes with a number of advantage   Cannabidiol, sometimes known as CBD, is quickly becoming one of the most popular natural […]




abi

Magic Bus aims to empower 65 lakh underprivileged youth with employability skills

The NGO operates in 23 states, and union territories, and operates out of 117 livelihood centres, of which 17 are all-girl centres




abi

Cabinet approves easing FDI norms for medical devices sector




abi

Cabinet clears ₹32,000 crore proposals for key space missions

Funds cover Chandrayaan-4, Venus Orbiter, space station, and next-gen launch vehicle




abi

The AlUla trump card | How Saudi Arabia is reopening the Incense Road

Immersive museums, historic digs and a heterogeneous workforce are helping pave the way as Saudi Arabia pivots from a carbon-based economy to a culture-focused one




abi

Cabinet approves Phase 3 of Namma Metro

44.65 km of new line will be added to the network by 2028 at a cost of ₹ 15,611 crore




abi

Explore the hidden frontiers of Arabia with Reza Pakravan

In this new show, Reza Pakravan claims to show viewers never-before-seen caves and canyons in Arabia




abi

Lightweight flexible self-powered photo-supercapacitors with good stability through photoelectrochemical deposition of tellurium on PPy–V2O5 films as a new visible light active dual photoelectrode

J. Mater. Chem. C, 2024, Advance Article
DOI: 10.1039/D4TC03090G, Paper
Mohamad Mohsen Momeni, Hossein Mohammadzadeh Aydisheh, Byeong-Kyu Lee, Ali Naderi
Lightweight flexible solid-state photosupercapacitors (FSSPC) with two identical Te@PPy–V2O5 photoelectrodes showed good performance and maintained functionality under different bending angles. They also demonstrated stability from −10 °C to 50 °C.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




abi

Visible light mediated efficient photoswitching of dimethyldihydropyrenes in thin films for all-photonic logic gate applications and dynamic encryption/decryption capabilities

J. Mater. Chem. C, 2024, 12,17511-17518
DOI: 10.1039/D4TC03321C, Paper
Sariful Molla, Subhajit Bandyopadhyay
Dimethyldihydropyrene (DHP) photoswitches exhibit visible light-induced ring-opening photoisomerization, reversed by UV/visible light or heat in thin films.
The content of this RSS Feed (c) The Royal Society of Chemistry




abi

Revealing the effect of conductive mechanism on the voltage endurance of ferroelectric thin films via controlling the deposition temperature for reaching high energy storage capability

J. Mater. Chem. C, 2024, Advance Article
DOI: 10.1039/D4TC03879G, Communication
Hongmei Jing, Shibo Zhao, Ting Wang, Wanbiao Hu, Liming Diwu, Jingru Xu, Peiqiao Han, Miao Liu, Zhuo Wang, Zixiong Sun
By controlling the conducting mechanism of BCZT–BZT thin films, which was significantly affected by the deposition temperature, the voltage endurance was strongly enhanced, and the energy storage performance was also optimized.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




abi

Has the perovskite LED stability problem been solved?

J. Mater. Chem. C, 2024, Advance Article
DOI: 10.1039/D4TC02975E, Perspective
Muhammad Umair Ali, Atta Ur Rehman, Aleksandra B. Djurišić
T 50 lifetimes of green PeLEDs reported in the literature vary widely even for very efficient devices. Standardization of stability testing and prolonged testing time instead of T50 estimates from accelerated testing is needed for consistent progress.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




abi

Interlaced NiCoO2 nanoparticle/nanosheet films for electrochromic energy storage devices with wide-band optical modulation and robust stability

J. Mater. Chem. C, 2024, Advance Article
DOI: 10.1039/D4TC02789B, Paper
Yongchao Liu, Yu Zhong, Huanhuan Liu, Pengyang Lei, Shiyou Liu, Jinhui Wang, Guofa Cai
A uniform NiCoO2 film with an interlaced nanoparticle/nanosheet structure was successfully grown on transparent conductive substrates for transparent-to-brownish grey electrochromic smart windows with improved cyclic stability.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




abi

A metal–organic framework enhanced single network organohydrogel with superior low-temperature adaptability and UV-blocking capability towards human-motion sensing

J. Mater. Chem. C, 2024, Advance Article
DOI: 10.1039/D4TC03148B, Paper
Ying Li, Zhongquan Yu, Jialuo Zhang, Enke Feng, Xiaoqin Li, Linan Cao, Zhiming Yang, Zhiqiang Wu
A UiO-66-NH2 nanoparticle reinforced organohydrogel with anti-freezing and UV-blocking properties was synthesized for sensing complex human movements and transmitting different messages even at subzero temperature.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




abi

Stabilizing perovskite quantum dot oxygen sensors through ultra-long 2 mm horizontally aligned nanopores in anodic alumina oxide templates

J. Mater. Chem. C, 2024, Advance Article
DOI: 10.1039/D4TC03851G, Paper
Johan Iskandar, Chih-Yi Liu, Chih-Chien Lee, Kuan-Yu Ke, M. Rivaldi Ali Septian, Richie Estrada, Humaidi Humaidi, Sajal Biring, Cheng-Shane Chu, Zong-Liang Tseng, Shun-Wei Liu
Perovskite quantum dots (PQDs) offer potential for gas sensing, though stability limits use. Johan et al. enhanced PQD stability with a horizontally aligned anodic alumina oxide template, maintaining fluorescence for 3 weeks without change.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




abi

Role of Br–Cl distribution uniformity on the spectral stability of blue emitting mixed-halide perovskites

J. Mater. Chem. C, 2024, Advance Article
DOI: 10.1039/D4TC03780D, Paper
Dan Chen, Yu Mao, Xianglan Huang, Jichen Zhao, Zhiyuan Zhang, Jian Wang, Junbiao Peng
Our findings show that the spectral stability of the quasi-2D perovskite system is mainly affected by the uniformity of the Br–Cl distribution, rather than defects.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




abi

Enhanced energy storage performance with excellent thermal stability of BNT-based ceramics via the multiphase engineering strategy for pulsed power capacitor

J. Mater. Chem. C, 2024, Accepted Manuscript
DOI: 10.1039/D4TC04170D, Paper
Maqbool Ur Rehman, Aiwen Xie, Attaur Rahman, Yi Zhang, Ao Tian, Xuewen Jiang, Xinchun Xie, Cong Zhou, Tianyu Li, Liqiang Liu, Xin Gao, Xiaokuo Er, Ruzhong Zuo
High-temperature resistance and ultra-fast discharging of materials is one of the hot topics in the development of pulsed power systems. It is still a great challenge for dielectric materials to...
The content of this RSS Feed (c) The Royal Society of Chemistry




abi

What Irrfan's Son Babil Wants To Explore

'Mere father ki khubiyaan woh lekar chale gaye, ab mein apne khubiyaan explore karoonga.'




abi

Probability of death by NCDs high in India: WHO




abi

National Health Policy: Cabinet note proposes assured services to all




abi

Nanoplasmonic biosensors for environmental sustainability and human health

Chem. Soc. Rev., 2024, 53,10491-10522
DOI: 10.1039/D3CS00941F, Review Article
Wenpeng Liu, Kyungwha Chung, Subin Yu, Luke P. Lee
This review examines recent developments in nanoplasmonic biosensors to identify analytes from the environment and human physiological parameters for monitoring sustainable global healthcare for humans, the environment, and the earth.
The content of this RSS Feed (c) The Royal Society of Chemistry




abi

Black titanium oxide: synthesis, modification, characterization, physiochemical properties, and emerging applications for energy conversion and storage, and environmental sustainability

Chem. Soc. Rev., 2024, 53,10660-10708
DOI: 10.1039/D4CS00420E, Review Article
Open Access
  This article is licensed under a Creative Commons Attribution 3.0 Unported Licence.
Xuelan Hou, Yiyang Li, Hang Zhang, Peter D. Lund, James Kwan, Shik Chi Edman Tsang
The current synthesis methods, modifications, and characterizations of black titanium oxide (B-TiOx) as well as a nuanced understanding of its physicochemical properties and applications in green energy and environment are reviewed.
The content of this RSS Feed (c) The Royal Society of Chemistry




abi

Stability of electrocatalytic OER: from principle to application

Chem. Soc. Rev., 2024, 53,10709-10740
DOI: 10.1039/D3CS00010A, Review Article
HuangJingWei Li, Yu Lin, Junyuan Duan, Qunlei Wen, Youwen Liu, Tianyou Zhai
A comprehensive summary of the stability of electrocatalytic OER will provide insight into electrocatalyst design and device optimization for industrial applications.
The content of this RSS Feed (c) The Royal Society of Chemistry




abi

Voice Content and Usability

We’ve been having conversations for thousands of years. Whether to convey information, conduct transactions, or simply to check in on one another, people have yammered away, chattering and gesticulating, through spoken conversation for countless generations. Only in the last few millennia have we begun to commit our conversations to writing, and only in the last few decades have we begun to outsource them to the computer, a machine that shows much more affinity for written correspondence than for the slangy vagaries of spoken language.

Computers have trouble because between spoken and written language, speech is more primordial. To have successful conversations with us, machines must grapple with the messiness of human speech: the disfluencies and pauses, the gestures and body language, and the variations in word choice and spoken dialect that can stymie even the most carefully crafted human-computer interaction. In the human-to-human scenario, spoken language also has the privilege of face-to-face contact, where we can readily interpret nonverbal social cues.

In contrast, written language immediately concretizes as we commit it to record and retains usages long after they become obsolete in spoken communication (the salutation “To whom it may concern,” for example), generating its own fossil record of outdated terms and phrases. Because it tends to be more consistent, polished, and formal, written text is fundamentally much easier for machines to parse and understand.

Spoken language has no such luxury. Besides the nonverbal cues that decorate conversations with emphasis and emotional context, there are also verbal cues and vocal behaviors that modulate conversation in nuanced ways: how something is said, not what. Whether rapid-fire, low-pitched, or high-decibel, whether sarcastic, stilted, or sighing, our spoken language conveys much more than the written word could ever muster. So when it comes to voice interfaces—the machines we conduct spoken conversations with—we face exciting challenges as designers and content strategists.

Voice Interactions

We interact with voice interfaces for a variety of reasons, but according to Michael McTear, Zoraida Callejas, and David Griol in The Conversational Interface, those motivations by and large mirror the reasons we initiate conversations with other people, too (http://bkaprt.com/vcu36/01-01). Generally, we start up a conversation because:

  • we need something done (such as a transaction),
  • we want to know something (information of some sort), or
  • we are social beings and want someone to talk to (conversation for conversation’s sake).

These three categories—which I call transactional, informational, and prosocial—also characterize essentially every voice interaction: a single conversation from beginning to end that realizes some outcome for the user, starting with the voice interface’s first greeting and ending with the user exiting the interface. Note here that a conversation in our human sense—a chat between people that leads to some result and lasts an arbitrary length of time—could encompass multiple transactional, informational, and prosocial voice interactions in succession. In other words, a voice interaction is a conversation, but a conversation is not necessarily a single voice interaction.

Purely prosocial conversations are more gimmicky than captivating in most voice interfaces, because machines don’t yet have the capacity to really want to know how we’re doing and to do the sort of glad-handing humans crave. There’s also ongoing debate as to whether users actually prefer the sort of organic human conversation that begins with a prosocial voice interaction and shifts seamlessly into other types. In fact, in Voice User Interface Design, Michael Cohen, James Giangola, and Jennifer Balogh recommend sticking to users’ expectations by mimicking how they interact with other voice interfaces rather than trying too hard to be human—potentially alienating them in the process (http://bkaprt.com/vcu36/01-01).

That leaves two genres of conversations we can have with one another that a voice interface can easily have with us, too: a transactional voice interaction realizing some outcome (“buy iced tea”) and an informational voice interaction teaching us something new (“discuss a musical”).

Transactional voice interactions

Unless you’re tapping buttons on a food delivery app, you’re generally having a conversation—and therefore a voice interaction—when you order a Hawaiian pizza with extra pineapple. Even when we walk up to the counter and place an order, the conversation quickly pivots from an initial smattering of neighborly small talk to the real mission at hand: ordering a pizza (generously topped with pineapple, as it should be).

Alison: Hey, how’s it going?

Burhan: Hi, welcome to Crust Deluxe! It’s cold out there. How can I help you?

Alison: Can I get a Hawaiian pizza with extra pineapple?

Burhan: Sure, what size?

Alison: Large.

Burhan: Anything else?

Alison: No thanks, that’s it.

Burhan: Something to drink?

Alison: I’ll have a bottle of Coke.

Burhan: You got it. That’ll be $13.55 and about fifteen minutes.

Each progressive disclosure in this transactional conversation reveals more and more of the desired outcome of the transaction: a service rendered or a product delivered. Transactional conversations have certain key traits: they’re direct, to the point, and economical. They quickly dispense with pleasantries.

Informational voice interactions

Meanwhile, some conversations are primarily about obtaining information. Though Alison might visit Crust Deluxe with the sole purpose of placing an order, she might not actually want to walk out with a pizza at all. She might be just as interested in whether they serve halal or kosher dishes, gluten-free options, or something else. Here, though we again have a prosocial mini-conversation at the beginning to establish politeness, we’re after much more.

Alison: Hey, how’s it going?

Burhan: Hi, welcome to Crust Deluxe! It’s cold out there. How can I help you?

Alison: Can I ask a few questions?

Burhan: Of course! Go right ahead.

Alison: Do you have any halal options on the menu?

Burhan: Absolutely! We can make any pie halal by request. We also have lots of vegetarian, ovo-lacto, and vegan options. Are you thinking about any other dietary restrictions?

Alison: What about gluten-free pizzas?

Burhan: We can definitely do a gluten-free crust for you, no problem, for both our deep-dish and thin-crust pizzas. Anything else I can answer for you?

Alison: That’s it for now. Good to know. Thanks!

Burhan: Anytime, come back soon!

This is a very different dialogue. Here, the goal is to get a certain set of facts. Informational conversations are investigative quests for the truth—research expeditions to gather data, news, or facts. Voice interactions that are informational might be more long-winded than transactional conversations by necessity. Responses tend to be lengthier, more informative, and carefully communicated so the customer understands the key takeaways.

Voice Interfaces

At their core, voice interfaces employ speech to support users in reaching their goals. But simply because an interface has a voice component doesn’t mean that every user interaction with it is mediated through voice. Because multimodal voice interfaces can lean on visual components like screens as crutches, we’re most concerned in this book with pure voice interfaces, which depend entirely on spoken conversation, lack any visual component whatsoever, and are therefore much more nuanced and challenging to tackle.

Though voice interfaces have long been integral to the imagined future of humanity in science fiction, only recently have those lofty visions become fully realized in genuine voice interfaces.

Interactive voice response (IVR) systems

Though written conversational interfaces have been fixtures of computing for many decades, voice interfaces first emerged in the early 1990s with text-to-speech (TTS) dictation programs that recited written text aloud, as well as speech-enabled in-car systems that gave directions to a user-provided address. With the advent of interactive voice response (IVR) systems, intended as an alternative to overburdened customer service representatives, we became acquainted with the first true voice interfaces that engaged in authentic conversation.

IVR systems allowed organizations to reduce their reliance on call centers but soon became notorious for their clunkiness. Commonplace in the corporate world, these systems were primarily designed as metaphorical switchboards to guide customers to a real phone agent (“Say Reservations to book a flight or check an itinerary”); chances are you will enter a conversation with one when you call an airline or hotel conglomerate. Despite their functional issues and users’ frustration with their inability to speak to an actual human right away, IVR systems proliferated in the early 1990s across a variety of industries (http://bkaprt.com/vcu36/01-02, PDF).

While IVR systems are great for highly repetitive, monotonous conversations that generally don’t veer from a single format, they have a reputation for less scintillating conversation than we’re used to in real life (or even in science fiction).

Screen readers

Parallel to the evolution of IVR systems was the invention of the screen reader, a tool that transcribes visual content into synthesized speech. For Blind or visually impaired website users, it’s the predominant method of interacting with text, multimedia, or form elements. Screen readers represent perhaps the closest equivalent we have today to an out-of-the-box implementation of content delivered through voice.

Among the first screen readers known by that moniker was the Screen Reader for the BBC Micro and NEEC Portable developed by the Research Centre for the Education of the Visually Handicapped (RCEVH) at the University of Birmingham in 1986 (http://bkaprt.com/vcu36/01-03). That same year, Jim Thatcher created the first IBM Screen Reader for text-based computers, later recreated for computers with graphical user interfaces (GUIs) (http://bkaprt.com/vcu36/01-04).

With the rapid growth of the web in the 1990s, the demand for accessible tools for websites exploded. Thanks to the introduction of semantic HTML and especially ARIA roles beginning in 2008, screen readers started facilitating speedy interactions with web pages that ostensibly allow disabled users to traverse the page as an aural and temporal space rather than a visual and physical one. In other words, screen readers for the web “provide mechanisms that translate visual design constructs—proximity, proportion, etc.—into useful information,” writes Aaron Gustafson in A List Apart. “At least they do when documents are authored thoughtfully” (http://bkaprt.com/vcu36/01-05).

Though deeply instructive for voice interface designers, there’s one significant problem with screen readers: they’re difficult to use and unremittingly verbose. The visual structures of websites and web navigation don’t translate well to screen readers, sometimes resulting in unwieldy pronouncements that name every manipulable HTML element and announce every formatting change. For many screen reader users, working with web-based interfaces exacts a cognitive toll.

In Wired, accessibility advocate and voice engineer Chris Maury considers why the screen reader experience is ill-suited to users relying on voice:

From the beginning, I hated the way that Screen Readers work. Why are they designed the way they are? It makes no sense to present information visually and then, and only then, translate that into audio. All of the time and energy that goes into creating the perfect user experience for an app is wasted, or even worse, adversely impacting the experience for blind users. (http://bkaprt.com/vcu36/01-06)

In many cases, well-designed voice interfaces can speed users to their destination better than long-winded screen reader monologues. After all, visual interface users have the benefit of darting around the viewport freely to find information, ignoring areas irrelevant to them. Blind users, meanwhile, are obligated to listen to every utterance synthesized into speech and therefore prize brevity and efficiency. Disabled users who have long had no choice but to employ clunky screen readers may find that voice interfaces, particularly more modern voice assistants, offer a more streamlined experience.

Voice assistants

When we think of voice assistants (the subset of voice interfaces now commonplace in living rooms, smart homes, and offices), many of us immediately picture HAL from 2001: A Space Odyssey or hear Majel Barrett’s voice as the omniscient computer in Star Trek. Voice assistants are akin to personal concierges that can answer questions, schedule appointments, conduct searches, and perform other common day-to-day tasks. And they’re rapidly gaining more attention from accessibility advocates for their assistive potential.

Before the earliest IVR systems found success in the enterprise, Apple published a demonstration video in 1987 depicting the Knowledge Navigator, a voice assistant that could transcribe spoken words and recognize human speech to a great degree of accuracy. Then, in 2001, Tim Berners-Lee and others formulated their vision for a Semantic Web “agent” that would perform typical errands like “checking calendars, making appointments, and finding locations” (http://bkaprt.com/vcu36/01-07, behind paywall). It wasn’t until 2011 that Apple’s Siri finally entered the picture, making voice assistants a tangible reality for consumers.

Thanks to the plethora of voice assistants available today, there is considerable variation in how programmable and customizable certain voice assistants are over others (Fig 1.1). At one extreme, everything except vendor-provided features is locked down; for example, at the time of their release, the core functionality of Apple’s Siri and Microsoft’s Cortana couldn’t be extended beyond their existing capabilities. Even today, it isn’t possible to program Siri to perform arbitrary functions, because there’s no means by which developers can interact with Siri at a low level, apart from predefined categories of tasks like sending messages, hailing rideshares, making restaurant reservations, and certain others.

At the opposite end of the spectrum, voice assistants like Amazon Alexa and Google Home offer a core foundation on which developers can build custom voice interfaces. For this reason, programmable voice assistants that lend themselves to customization and extensibility are becoming increasingly popular for developers who feel stifled by the limitations of Siri and Cortana. Amazon offers the Alexa Skills Kit, a developer framework for building custom voice interfaces for Amazon Alexa, while Google Home offers the ability to program arbitrary Google Assistant skills. Today, users can choose from among thousands of custom-built skills within both the Amazon Alexa and Google Assistant ecosystems.

Fig 1.1: Voice assistants like Amazon Alexa and Google Home tend to be more programmable, and thus more flexible, than their counterpart Apple Siri.

As corporations like Amazon, Apple, Microsoft, and Google continue to stake their territory, they’re also selling and open-sourcing an unprecedented array of tools and frameworks for designers and developers that aim to make building voice interfaces as easy as possible, even without code.

Often by necessity, voice assistants like Amazon Alexa tend to be monochannel—they’re tightly coupled to a device and can’t be accessed on a computer or smartphone instead. By contrast, many development platforms like Google’s Dialogflow have introduced omnichannel capabilities so users can build a single conversational interface that then manifests as a voice interface, textual chatbot, and IVR system upon deployment. I don’t prescribe any specific implementation approaches in this design-focused book, but in Chapter 4 we’ll get into some of the implications these variables might have on the way you build out your design artifacts.

Voice Content

Simply put, voice content is content delivered through voice. To preserve what makes human conversation so compelling in the first place, voice content needs to be free-flowing and organic, contextless and concise—everything written content isn’t.

Our world is replete with voice content in various forms: screen readers reciting website content, voice assistants rattling off a weather forecast, and automated phone hotline responses governed by IVR systems. In this book, we’re most concerned with content delivered auditorily—not as an option, but as a necessity.

For many of us, our first foray into informational voice interfaces will be to deliver content to users. There’s only one problem: any content we already have isn’t in any way ready for this new habitat. So how do we make the content trapped on our websites more conversational? And how do we write new copy that lends itself to voice interactions?

Lately, we’ve begun slicing and dicing our content in unprecedented ways. Websites are, in many respects, colossal vaults of what I call macrocontent: lengthy prose that can extend for infinitely scrollable miles in a browser window, like microfilm viewers of newspaper archives. Back in 2002, well before the present-day ubiquity of voice assistants, technologist Anil Dash defined microcontent as permalinked pieces of content that stay legible regardless of environment, such as email or text messages:

A day’s weather forcast [sic], the arrival and departure times for an airplane flight, an abstract from a long publication, or a single instant message can all be examples of microcontent. (http://bkaprt.com/vcu36/01-08)

I’d update Dash’s definition of microcontent to include all examples of bite-sized content that go well beyond written communiqués. After all, today we encounter microcontent in interfaces where a small snippet of copy is displayed alone, unmoored from the browser, like a textbot confirmation of a restaurant reservation. Microcontent offers the best opportunity to gauge how your content can be stretched to the very edges of its capabilities, informing delivery channels both established and novel.

As microcontent, voice content is unique because it’s an example of how content is experienced in time rather than in space. We can glance at a digital sign underground for an instant and know when the next train is arriving, but voice interfaces hold our attention captive for periods of time that we can’t easily escape or skip, something screen reader users are all too familiar with.

Because microcontent is fundamentally made up of isolated blobs with no relation to the channels where they’ll eventually end up, we need to ensure that our microcontent truly performs well as voice content—and that means focusing on the two most important traits of robust voice content: voice content legibility and voice content discoverability.

Fundamentally, the legibility and discoverability of our voice content both have to do with how voice content manifests in perceived time and space.




abi

Improved photovoltaic performance and stability of perovskite solar cells by adoption of an n-type zwitterionic cathode interlayer

Mater. Horiz., 2024, Advance Article
DOI: 10.1039/D4MH00253A, Communication
Young Wook Noh, Jung Min Ha, Jung Geon Son, Jongmin Han, Heunjeong Lee, Dae Woo Kim, Min Hun Jee, Woo Gyeong Shin, Shinuk Cho, Jin Young Kim, Myoung Hoon Song, Han Young Woo
Integration of NDI-ZI as a cathode interlayer in perovskite solar cells improves both device efficiency and stability, mitigating halide and Ag ion migration by chemically capturing ions via electrostatic Coulombic interactions.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




abi

Composited silk fibroins ensured adhesion stability and magnetic controllability of Fe3O4-nanoparticle coating on implant for biofilm treatment

Mater. Horiz., 2024, Advance Article
DOI: 10.1039/D4MH00097H, Communication
Kecheng Quan, Zhinan Mao, Yupu Lu, Yu Qin, Shuren Wang, Chunhao Yu, Xuewei Bi, Hao Tang, Xiaoxiang Ren, Dafu Chen, Yan Cheng, Yong Wang, Yufeng Zheng, Dandan Xia
Magnetic propulsion of nano-/micro-robots is an effective way to treat implant-associated infections by physically destroying biofilm structures to enhance antibiotic killing.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




abi

High-Entropy Materials for Thermoelectric Applications: Towards Performance and Reliability

Mater. Horiz., 2024, Accepted Manuscript
DOI: 10.1039/D3MH02181E, Review Article
NOUREDINE OUELDNA, Noha Sabi, Hasna Aziam, Vera Trabadelo, Hicham Ben youcef
High-entropy materials (HEMs), including alloys, ceramics and other entropy-stabilized compounds, have attracted considerable attention in different application fields. This is due to their intrinsically unique concept and properties, such as...
The content of this RSS Feed (c) The Royal Society of Chemistry




abi

Microcage flame retardants with complete recyclability and durability via reversible interfacial locking engineering

Mater. Horiz., 2024, 11,1867-1876
DOI: 10.1039/D4MH00116H, Communication
Furong Zeng, Lei He, Jianwen Ma, Danxuan Fang, Zhiwei Zeng, Tongyu Bai, Rong Ding, Bowen Liu, Haibo Zhao, Yuzhong Wang
A new facile and scalable interfacial locking engineering strategy is exploited to endow reversible microcages with infinite chemical recyclability to starting monomers, exceptional durability, high flame-retardant efficiency, and extensive applicability across diverse polymers.
The content of this RSS Feed (c) The Royal Society of Chemistry




abi

Spice it up the Arabic way: Spice 6

Lovers of authentic Arabic cuisine now have a restaurant that can satiate their palate




abi

Not Just Art, an initiative by city-based Youth4Jobs brings hope to the artists with disabilities

A celebration of arts and abilities




abi

Bengaluru | Artist Abishek Ganesh aka Kaimurai’s exhibition The Divine Blue attempts to capture the mystique of indigo

In Ganesh’s works, done on handloom textile, paper, or canvas, the indigo strokes pulsate with a latent energy




abi

Riar Saab’s latest Punjabi hip-hop track ‘Obsessed’ gets the nation grooving

Hip-hop frenzy peaks as Riar Saab unleashes the madness of his popular track ‘Gaddiyan Ucchiyan Rakhiyaan’ during his Obsessed Tour




abi

Instability and uncertainty stalk Bangladesh

The troubles in Bangladesh are by no means over and India may need new strategies to deal with the situation to its east




abi

Credible minimum deterrence needed for regional stability:Aziz

Aziz claimed that Pakistan is maintaining "minimum nuclear deterrence" for peace and stability in the region and called upon the international community to desist from policies and actions that undermine strategic stability in South Asia.




abi

Ramco Systems’ CEO to step down in January; founder’s son Abinav Raja to take over

CEO Sundar Subramanian joined the company in July 2023




abi

Wayanad landslide: Land acquisition for rehabilitation of survivors to be expedited

Though the State had sought a special assistance package for the affected, the Centre is yet to approve it, says Revenue Minister




abi

Workplace Presenteeism, Job Substitutability and Gender Inequality [electronic journal].




abi

Value for Money? Community Targeting in Vote-Buying and Politician Accountability [electronic journal].

National Bureau of Economic Research




abi

Symbolism Matters: The Effect of Same-Sex Marriage Legalization on Partnership Stability [electronic journal].




abi

Sticky Expectations and the Profitability Anomaly [electronic journal].




abi

Stabilization vs. Redistribution: the Optimal Monetary-Fiscal Mix [electronic journal].




abi

Stability and sustainability of urban systems under commuting and transportation costs [electronic journal].




abi

Salience and Accountability: School Infrastructure and Last-Minute Electoral Punishment [electronic journal].