In a communication to all states and union territories, the NDMA said due to several weeks of lockdown and the closure of industrial units, it is possible that some of the operators might not have followed the established standard operating procedures.

Are synchrotrons needed for innovation in industry? What can scientists at large-scale facilities offer for R&D in industry? Is the comfort of life profiting from research?

The setup and operation of an industrial cryo-EM laboratory is described.

Cryo-electron microscopy (cryo-EM) has rapidly expanded with the introduction of direct electron detectors, improved image-processing software and automated image acquisition. Its recent adoption by industry, particularly in structure-based drug design, creates new requirements in terms of reliability, reproducibility and throughput. In 2016, Thermo Fisher Scientific (then FEI) partnered with the Medical Research Council Laboratory of Molecular Biology, the University of Cambridge Nanoscience Centre and five pharmaceutical companies [Astex Pharmaceuticals, AstraZeneca, GSK, Sosei Heptares and Union Chimique Belge (UCB)] to form the Cambridge Pharmaceutical Cryo-EM Consortium to share the risks of exploring cryo-EM for early-stage drug discovery. The Consortium expanded with a second Themo Scientific Krios Cryo-EM at the University of Cambridge Department of Materials Science and Metallurgy. Several Consortium members have set up in-house facilities, and a full service cryo-EM facility with Krios and Glacios has been created with the Electron Bio-Imaging Centre for Industry (eBIC for Industry) at Diamond Light Source (DLS), UK. This paper will cover the lessons learned during the setting up of these facilities, including two Consortium Krios microscopes and preparation laboratories, several Glacios microscopes at Consortium member sites, and a Krios and Glacios at eBIC for Industry, regarding site evaluation and selection for high-resolution cryo-EM microscopes, the installation process, scheduling, the operation and maintenance of the microscopes and preparation laboratories, and image processing.

Book review

The rescue pods will be part of the project’s Amphibian Rescue Center at Summit Municipal Park, which will also include a lab with a quarantine facility.

The post Shipping industry sends help as project in Panama tackles amphibian crisis appeared first on Smithsonian Insider.

The impact of industrial fishing on coastal ecosystems has been studied for many years. But how it affects food webs in the open ocean―a vast […]

The post Scientists find impact of open-ocean industrial fishing within centuries of bird bones appeared first on Smithsonian Insider.

Ingenico Group,

To transform the offshore oil and gas industry’s safety culture, operators, contractors, subcontractors, associations representing these groups, and federal regulators should collaborate to foster safety throughout all levels of the industry and confront challenges collectively, says a new report from the National Academies of Sciences, Engineering, and Medicine.

The Gulf Research Program (GRP) of the National Academies of Sciences, Engineering, and Medicine today announced it will award up to $10 million through a new funding opportunity to support research projects that will advance understanding and facilitate improvement of safety culture in the offshore oil and gas industry.

Renewed interest in exploration of the moon has the potential to benefit lunar science greatly and could evolve into a program facilitated by partnerships between commercial companies and NASA’s Science Mission Directorate (SMD), say companion reports by the National Academies of Sciences, Engineering, and Medicine.

A new report from the National Academies of Sciences, Engineering, and Medicine offers guidance to the U.S. Environmental Protection Agency to inform the next revision of a permit program that requires industries to manage stormwater to minimize discharges of pollutants to the environment.

The Gulf Research Program (GRP) of the National Academies of Sciences, Engineering, and Medicine today announced $7.25 million in grant awards for eight projects focused on strengthening safety culture in the offshore oil and gas industry.

NASA should collaborate with the Federal Aviation Administration (FAA), industry, academia to research the full effects that increased unpiloted air vehicle traffic would have on society, including ramifications to sound, privacy, environmental matters, and cybersecurity, says a new report from the National Academies of Sciences, Engineering, and Medicine.

Pedestrians walk by the Castro Theatre that has a marquee announcing that they are closed due to a statewide ordinance banning gatherings of more than 250 people in San Francisco, California. ; Credit: Justin Sullivan/Getty Images

Hollywood has come to a stand still. The film and entertainment industry has been hit hard by the coronavirus outbreak as theaters close, film releases and events are being postponed, and studios are putting a pause on film production.

The gravity of the coronavirus is being felt all throughout the country and Hollywood is not coming out of the outbreak unscathed. Social distancing measures being enforced to help control the outbreak has studios and theatres taking a huge hit. It’s predicted that about 170,000 people in the film industry will lose their jobs. Many of the lowest-paid positions and freelance jobs have been the first to go. From events to films, the industry is trying to strategize around the outbreak with no clear picture on how long these conditions could last. Hollywood unions, activist groups and nonprofits are coming together to help provide some kind of emergency relief for workers who are getting hit the hardest. It’s been a period of economic shock for the entertainment industry and it’s still too early to see what Hollywood could look like after the outbreak is over.

Today on AirTalk, we check-in with people in the entertainment industry who have been impacted by the outbreak and where might Hollywood go from here. If you work in entertainment, we'd like to hear from you! How are you coping as most productions are shut down? Join the live conversation by calling 866-893-5722.

Guest:

Andrew Wallenstein, co-editor-in-chief at Variety; he tweets @awallenstein

This content is from Southern California Public Radio. View the original story at SCPR.org.

U.S. Rep. Adam Schiff (D-CA) listens during a news conference in front of the U.S. Capitol.; Credit: Alex Wong/Getty Images

As we discussed last week on FilmWeek, entertainment industry professionals are among the hardest hit amid the stoppage of everyday work and life due to COVID-19. Whether you’re on camera or stage, or behind it, above the line or below it, production shutdowns mean that industry professionals who already rely on sporadic work as it’s available are left with few to no options for sustainable income. 

Last week, Congressman Adam Schiff and other members of Congress who represent areas with large constituencies that work in the entertainment industry sent a letter to House leaders asking them to provide relief for both freelance and contract entertainment industry workers. “The unique freelance nature of work in film, television, theater, and live music means that a large number of the professionals who make these productions possible work only sporadically—often with extended periods between paying jobs—and count on income from each project to make ends meet,” the letter said in part. “As a result, many of them can’t qualify for traditional unemployment benefits or paid emergency leave, yet will now be unable to cover their basic expenses due to lost work.” 

Today on AirTalk, Congressman Schiff joins us to talk about what relief both freelance and contract entertainment industry professionals can expect if the House passes the stimulus package that would provide financial aid to Americans during the coronavirus pandemic. 

Guest: 

Adam Schiff, U.S. Congressman representing California’s 28th Congressional District, which includes Burbank, parts of Pasadena, and Glendale, and chairman of the House Intelligence Committee; he tweets @RepAdamSchiff

This content is from Southern California Public Radio. View the original story at SCPR.org.

Bycatch (species caught unintentionally in fisheries) in some commercial marine fisheries is the main cause of death in some populations of seabirds, sea turtles, marine mammals, sharks and fish. New research has revealed that bycatch from tuna fishing can be reduced by using better equipment, without compromising industry profits. However, significant policy efforts are needed to monitor bycatch and enforce more sustainable fishing practices.

A new study has investigated the possibility of a regional industrial symbiosis of metal industries across the Sweden-Finland border. The analysis suggests that it is technologically feasible, but that regulatory support may be inefficient, particularly with respect to changing the status of a waste product to a by-product.

As 3D printing, also known as additive manufacturing (AM), begins to replace conventional manufacturing, the environmental impacts of its implementation must be assessed. This study conducted a life cycle assessment (LCA) to investigate the environmental and resource implications of using AM to manufacture the metal parts of an engine in a light distribution truck. In the LCA, the impacts of both present and possible future states of AM technology were compared with current conventional manufacturing. The results suggest that there are potential environmental and resource benefits1 to AM technologies, but that these benefits rely on the achievement of a clean energy source and further technological development.

A new study has investigated the possibility of a regional industrial symbiosis of metal industries across the Sweden-Finland border. The analysis suggests that it is technologically feasible, but that regulatory support may be inefficient, particularly with respect to changing the status of a waste product to a by-product.

A recent study has provided support for an alternative means of tackling the unsustainability of resource-intensive economic growth. Using examples of best practice, it upholds a model of moderate growth in GDP combined with a significant increase in the environmental technology market and greater resource-efficiency across all industries.

New research suggests that the main driver for industrial ecology initiatives is financial gain, whilst regulation plays a smaller role. Policy does influence their development but this tends to be indirectly through initiatives such as pollution control and waste reduction targets, rather than through direct regulation to enforce or encourage industrial ecology.

Using archival documents, a new report published online by JAMA Internal Medicine examines the sugar industry's role in coronary heart disease research and suggests the industry sponsored research to influence the scientific debate to cast doubt on the hazards of sugar and to promote dietary fat as the culprit in heart disease.

read more

A new study has assessed the annoyance caused by a combination of noises typically found on an industrial site. The results could help improve total noise annoyance prediction models. For example, it was found that ‘broadband’ noises, which consist of a wide range of frequencies, lead to more annoyance if they are combined with a specific additional set of low frequency noises, which can lead to an overall identical noise level.

A recent study has analysed risks to European renewable industries from the Chinese supply of critical raw materials. The offshore wind sector was found to be the most vulnerable of the renewable industries to supply risks. EU and industry strategies should be able to deal with these supply risks in the short term, but there are potential long-term risks to solar and wind sectors. The development of alternative technologies less reliant on these raw materials, and methods to recycle these materials is, therefore, a priority.

Technological advances in European cement production could reduce energy consumption by up to 10% and CO2 emissions by 4%, according to a new analysis. The research suggests that initial costs of some of the pending technological improvements could be recouped in as little as a year.

Increasing energy efficiency in Europe is vital to achieving a sustainable economy and tackling climate change. However, new research has shown that lack of capital and concerns about costs of disruption are major barriers to implementing energy efficiency measures in the foundry industry.

The impact of climate change on the distribution of tree species is likely to have economic implications for the timber industry. A new study has estimated that climate-induced shifts in range could reduce the value of European forest land for the timber industry by between 14 and 50% by 2100. At the higher end of this estimate, this could equate to a potential loss of several hundred billions of euros.

Fishing in most of Norway’s counties is at ‘moderate’ to ‘high’ risk from ocean acidification, concludes a new study. The researchers reached this conclusion with the use of an integrated risk-assessment method that accounts for environmental, economic and social factors within the 19 counties. They call for immediate action to protect the fishing industry against the effects of ocean acidification.

A new study has investigated the possibility of a regional industrial symbiosis of metal industries across the Sweden-Finland border. The analysis suggests that it is technologically feasible, but that regulatory support may be inefficient, particularly with respect to changing the status of a waste product to a by-product.

Turkey is a major ship recycling centre and is the largest OECD member country with a significant ship recycling industry. In this study, researchers reviewed the environmental, health and safety issues surrounding the Turkish shipbreaking industry, its compliance with environmental regulations and its ability to claim ‘green recycling’.

A successful circular economy for valuable metals needs more than just effective recycling technologies, as a new study shows. The research, which explored the governance of recovering vanadium from steel-industry waste, revealed that industry stakeholders feel the prospect of financial gain, or reduced costs, through recovery is too distant at present. This perception could hinder a circular economy for critical materials from industrial residue, the study warns.

Micro, small and medium-sized enterprises comprise the majority of European businesses — and, therefore, have a vital role to play in reducing our dependence on, and consumption of, increasingly scarce resources. A new study explores whether the concept of industrial symbiosis, in which companies use waste products of other industries as raw materials, is common in small- and medium-sized companies (SMEs) — using beer producers and mushroom farmers in Sweden as case studies.

Researchers have devised a blueprint to integrate the efficient use of waste wood throughout a bioeconomy system — part of the economy that uses renewable biological resources from land and sea. This study assessed the environmental sustainability of three scenarios for increasing targeted levels of industrial symbiosis within the wood-based bioeconomy of central Germany, and found that, in most cases, the three alternative future bioeconomy networks outperformed the selected fossil-based reference systems, mitigating environmental impacts by 25 to 130%.

April was a month of heavy-lifting for Anand Natarajan, COO, DBS Bank India, but the company’s investments made towards building a robust tech infrastructure made pandemic substantially easier for him.

In addition to reducing carbon emissions, policies promoting efficient energy use can encourage innovation in the manufacturing sector. This study evaluated the innovation effect of household energy policies using a comprehensive dataset of 21 European countries. The results show that policies such as financial subsidies and product labels can promote the development of sustainable-energy technologies.

As electronics manufacturers are set to resume operations in India, it is apparent that in the short term there is no alternative to sourcing from China, as urgent replenishment of inventories clearly implies continued dependence on it.

April was a month of heavy-lifting for Anand Natarajan, COO, DBS Bank India, but the company’s investments made towards building a robust tech infrastructure made pandemic substantially easier for him.

The energy output from offshore wind power has increased dramatically in recent years, and the costs of wind power are expected to fall, according to a recent analysis. The study reviews the global offshore wind sector, outlining the market’s current situation, costs and technology.

In the automobile industry, the development and manufacture of increasingly complex technological components — catalytic converters, LEDs, electric motors, batteries — requires increasingly complex and diverse raw materials with specific qualities. The technological and economic importance of these materials, combined with their vulnerability to supply shortages and likelihood of supply interruptions, indicates their ‘criticality’. This study uses a new methodology to explore the criticality of 27 key metals used in the automotive industry and other sectors, and highlights six that are especially vulnerable: rhodium, dysprosium, neodymium, terbium, europium and praseodymium. The researchers found there was limited recycling and substitution of these metals and a high possibility of restrictions to their supply.

The impact of climate change on the distribution of tree species is likely to have economic implications for the timber industry. A new study has estimated that climate-induced shifts in range could reduce the value of European forest land for the timber industry by between 14 and 50% by 2100. At the higher end of this estimate, this could equate to a potential loss of several hundred billions of euros.

Recycling waste products between companies in industrial recycling networks can bring environmental and competitive benefits. A recent study on whether such networks can be used to advance sustainable development more broadly suggests companies first need a clear, shared network identity before other types of sustainability-oriented cooperation can take place.

Environmental regulation that is developed voluntarily within a company, for example through eco-management schemes, is more likely to lead to a competitive advantage than compulsory regulation, according to new research. The study of 208 Spanish companies suggests that command-and-control legislation tends to be perceived as a threat.

New research has outlined three instruments to encourage green industry: adequate governmental resources, co-operation between interest groups and effective negotiation between state and interest groups. Taking the example of the organic food sector, it explored why Denmark has met these conditions whereas Australia has not.

A recent study has provided support for an alternative means of tackling the unsustainability of resource-intensive economic growth. Using examples of best practice, it upholds a model of moderate growth in GDP combined with a significant increase in the environmental technology market and greater resource-efficiency across all industries.

Many EU businesses are failing to cover the net cost of recycling packaging waste, new research suggests. Industry is required to take responsibility for treating and recycling waste packaging in the EU; however, this study shows that producers in France, Portugal and Romania do not fully cover waste management costs.

The impact that national energy sectors have on international freshwater resources has been demonstrated in the first global study of its kind. The analysis of 129 countries showed differences between countries and sectors in their reliance on international freshwater resources. For example, although the petroleum industries of North America and China are similar in magnitude, the North American industry consumes three times as much international freshwater. Demands from economically developed countries on less economically developed countries, which may have pre-existing water-scarcity issues, compound these problems and complicate the creation of policies that ensure both water and energy security.