Abacus Plumbing's whole-house carbon water filtration, softener and reverse osmosis equipment can dramatically reduce water contaminates.

Disinfection byproducts (DBP) are becoming a matter of renewed concern in the regulatory and scientific world. It is necessary for all of us to understand the reasons and facts behind such new activity in this field. 

There’s no doubt about it, concern over water quality is becoming more prevalent. One just had to walk the trade show floor during the 2022 Kitchen & Bath Industry Show (KBIS) to see plenty of new water filtration and management systems, some even dispensing sparkling water by user preference.

A proposed series of U.S. Environmental Protection Agency (EPA) regulations that set maximum contaminant levels (MCLs) for per- and polyfluoroalkyl substances (PFAS) and other so-called ‘GenX chemicals’ are set to go into effect in the fall.

Plumbing & Mechanical and PM Engineer Chief Editor Nicole Krawcke sits down with Legionella expert Dr. Janet Stout, PhD, to discuss best practice strategies in the plumbing industry for implementing risk assessments and Water Management Programs.

Franklin Water Treatment provides products, services, and system solutions for residential, commercial, and industrial point-of-use and point-of-entry water treatment products, in a wide variety of markets and applications.

Water scarcity is a growing issue globally. Some regions are adopting water reuse and rainwater capture solutions. Onsite water reuse can help save money, reduce water demands, and manage stormwater flows. With onsite water reuse, you can reuse up to 95% of a building's wastewater.

Leading up to the SDWA anniversary in December, AWWA will continue to recognize the Act’s significant contributions to improving and protecting water quality and emphasize the need for continued investment and scientific evaluation to address emerging challenges.

UFI provides filtration solutions to domestic and international customers servicing food, beverage, potable and wastewater applications.

Point-of-use (POU) water disinfection isn't just about public health; it's also an essential engineering strategy in modern water systems, tackling waterborne diseases by ensuring safe drinking water directly at the point of consumption.

NSF International Standard 53 is internationally recognized as the benchmark for water filtration systems’ effectiveness in reducing specific health-related contaminants. 

The APEX Awards are based on excellence in graphic design, editorial content and the ability to achieve overall communications excellence. 

Education enhanced my earning potential. I became a more skilled technician, gained knowledge about new and emerging technologies, and became a much more valuable asset to my employers. Throughout my journey, I met numerous mentors in various aspects of the PHVAC trades and established insider contacts that proved to be invaluable.

Efficient fleet management is essential for plumbing and HVAC contractors looking to optimize operations and improve service. Customizing fleet vehicles to meet specific company needs is a key strategy. Modern upfitting now includes advanced technology and ergonomic designs, creating mobile workstations that boost efficiency on job sites.

Founded in 1961, Herman’s Plumbing has the distinction of being a thriving third-generation family-run business. 

Southern Trust Home Services began life on a farm. An electrician by trade, Ted Puzio founded his contracting business in 1995 while raising his two teenage sons. Then named TP Electric, Puzio and his sons renovated and flipped farmhouses before building a two-story facility to both live in and use as a workshop.

What do logging and plumbing have in common? Jon Hatch for one. After a friend told him about a plumbing apprenticeship opening 15 years ago, Jon Hatch made the jump to the plumbing industry. 

District systems, which have been around for centuries, provide buildings with a product created with technology beyond what an individual can either afford or apply. The primary advantage is the delivery of more cost-effective heating or cooling to the building.

Ever since the RPA was formed, members have taken advantage of the great benefits the alliance has to offer, such as codes and standards advocacy, a job center network, obtaining and creating valuable education, the annual Radiant Flooring Guide, newsletter subscription, discounts for IAPMO products and services, access to webinars and more. RPA members are professionals from all facets of the radiant profession, including manufacturers, installers, engineers, architects, students, apprentices and inspectors.

Within the halls of our recent meetings, the RPA community witnessed a defining moment. Committees were not just formed; they were crafted as engines of change.

In a radiant heating and cooling system, water circulates through PEX pipes in the concrete slab to control the slab's temperature for heating or cooling.

In 1988, Holland, Michigan’s downtown needed revitalization. Merchants were leaving for a nearby indoor mall. Local industrialist Ed Prince proposed installing a snow-melt system for the streets and sidewalks after seeing a similar system in Europe.

The event’s more than 100 technical sessions will showcase on eight conference tracks will offer emerging approaches to building design, construction and operation.

Key actions at the plant in Hutchinson included focusing on electricity consumption, energy efficiency and the use of green electricity since 2021. These measures have reduced the site’s emissions by about 94% as compared to the baseline year 2019. 

Giglio is a dedicated member of PHCC of Louisiana’s leadership, currently serving as president-elect after more than a decade of work on the chapter’s Board of Directors

Included in Interplay’s career development platform, SAM provides technicians with immediate guidance to help them gain skills faster and learn more efficiently in a more engaging manner. S

 All entries are reviewed and selected by a panel of third-party judges made up of distinguished ASHRAE members. Evaluations are based on overall innovative design, creativity of the product or service offered, product or technology real-world application, as well as overall potential market impact.

Applicants must be plumbing or HVAC apprentices or trade school students, or college students pursuing studies directly related to the plumbing-heating-cooling industry.

Xylem, in conjunction with its Goulds Water Technology brand, is engaged in regular water well initiatives to provide secure water access to rural areas, striving to increase public awareness of the challenges surrounding lack of water access.

These changes will unify the Conformity Assessment Group, merging testing and certification services under one roof to provide consistent, gold standard- level customer service across all departments and all office locations.

The award is presented every two years to a nominee with attributes including technical mastery and a passion for hydronic technologies, demonstrated leadership as an educator and mentor, and an aptitude for cultivating fundraising opportunities for industry causes.

The event also offered ASPE-accredited Continuing Education Units (CEUs), enhancing participants' knowledge and professional development.

 The 71st Annual Meeting of the Membership will be held as part of the PMI25 Manufacturing Success Conference from Nov. 3-6, 2025, at the Fairmont Hotel in Chicago. 

On Nov. 7, Fluidmaster acquired the assets of Haron International Pty Ltd based in Melbourne, Victoria, Australia.

It’s important to always be mentally present at every service call.

Taco Comfort Solutions has expanded its family of easy-to-use, high-efficiency ECM circulators with the addition of the 0026e.

Niagara’s Shadow 0.8 GPF with Stealth Technology is an award-winning toilet that is WaterSense certified and has a MaP Premium Score of 1000g.

The Noritz NRCB residential combination boiler allows simultaneous hot water and space heating.

Taco Comfort Solutions/Hydroflo VT Series vertical turbine submersible pumps provide excellent reliability and ease of installation.

Jeff Hahn joins the podcast to talk about his firm’s unique Austin, Texas-based culture, surviving his own crisis and much more.

The founder and CEO of the Acceleration Community of Companies drops by a special Halloween edition of PRWeek’s podcast.

As residential building codes and energy conservation standards continue to evolve, many are requiring proof of high quality air sealing.

 All boilers that burn hydrocarbon fuels such as natural gas, propane, oil or wood produce water vapor as a byproduct of combustion.

Although the market for solar thermal systems is a tiny fraction of what it once was, I still believe there are viable applications that could help in decarbonizing thermal energy systems.

The overall objective was to create a complete HVAC system, rather than just a heating + cooling system. The system would provide space heating, cooling, domestic hot water, and fresh air ventilation.

One of the best things about hydronic heating is there is virtually no limit to how piping systems can be customized. One of the worst things about hydronic heating is that there is virtually no limit to how piping systems can be customized.

Find out about piping options for retrofitting an air-to-water heat pump into an existing hydronic system.

I’ve written many PM columns discussing how air-to-water and geothermal water-to-water heat pumps can be combined with hydronic delivery systems to deliver efficiency AND superior comfort. This combination is a great solution for many consumers.

Primary/secondary piping is a way to achieve hydraulic separation by connecting multiple hydronic circuits with their own circulators to prevent interference. Using a pair of closely spaced tees is a common method to achieve this.

A little water conservation can go a long way.

And as the second-most visited space in commercial buildings — just behind the lobby — the restroom and its water-saving fixtures can help lead the way when it comes to cutting back consumption.