At the turn of the 20th century, a vaccine had been developed for smallpox, a virus that killed millions in the 1800s. Those who survived the disease were often left badly scarred or blind.

The vaccine’s protection, though, lasted only five years and had to be renewed. And people forgot to do that, leading to occasional epidemics, including a serious outbreak on the Meskwaki Settlement near Tama.

In February 1901, three dozen Iowa communities reported smallpox outbreaks. When Des Moines reported 200 smallpox cases in late February, the mayor closed the schools and prohibited public gatherings. Still, no one died. That would not be the case at the Meskwaki Settlement.

On Oct. 22, 1901, an area resident told Dr. Benjamin Thompson of Tama, “I believe the Indians have the smallpox.”

Thompson went to the nearby Meskwaki Settlement, home to 309 people, to investigate.

He learned that an Indian from the Winnebago tribe had visited the settlement Sept. 23. He had become ill, but no doctor was called and he continued meeting with tribe members.

Two weeks later, the Meskwaki were becoming ill.

Thompson went back to the settlement with Dr. George Carpenter of Toledo. The first wickiup they visited had four active smallpox cases and three people recovering from the virus. Two Meskwaki who’d lived there had died.

The doctors found another five cases and were told of two other deaths.

The doctors that night reported to a joint meeting of the boards of health in Tama, Toledo and Montour.

William Malin, the Interior Department’s Indian agent for the settlement, insisted there was no problem. But after another medical visit to the settlement, the three cities quarantined themselves.

By Nov. 2, 70 Meskwaki had smallpox, and nine members of the tribe had died. Two weeks later, the totals had risen to 90 Meskwaki with smallpox and 35 deaths.

To complicate matters, the Meskwaki declined offers to go to the hospital, they refused smallpox vaccinations and they refused to stay on the settlement. If they became sick, they would hide from the doctors.

The Tama Herald reported, “It looks as though the disease must run its course through the tribe, carrying off the aged and the infirm and weakening the constitution of those who may survive.”

The Iowa governor appealed to Interior Secretary Ethan Hitchcock for authority to enforce the quarantine among the Meskwaki. Hitchcock complied, giving the state the authority to “take any necessary action.”

National Guard hospital tents and cots were shipped to the settlement. The Meskwaki were vaccinated, and they acquiesced to the quarantine.

The local towns began raising money for medicines and provisions not covered by the federal government.

Meanwhile, Congress appropriated $50,000 — more than $1 million in today’s dollars — to eradicate smallpox on the settlement. The bill gave the Interior Department the authority to quarantine the village and, if necessary, burn Meskwaki wickiups and clothing to halt the contagion.

The state of Iowa chipped in another $7,000 to burn the clothing, blankets, wickiups and other property belonging to the Tama tribe and to provide replacements for the Meskwaki.

The money paid for disinfectants — formaldehyde gas and corrosive sublimate fluid — to bathe tribal members and their dogs. Members of the tribe were forced to move to a camping ground while their village was decontaminated.

Malin, the Indian agent, reported to the Interior Department it took seven days to clean and renovate “the Indian camp.”

“During this process, a large number of the wickiups, where the disease had been prevalent, also large quantities of clothing, bedding and other infected property, were committed to the flames and new goods of similar character supplied,” he reported.

“Twenty-four new board houses, built of good lumber, and some 2,700 square yards of very heavy duck for tents, to those who preferred tents to houses, were given in lien of the wickiups destroyed. ... The Indians emerged from the trying ordeal through which they had passed and came out into the world again, after having been confined to the limited area of their camping grounds ... with a higher and better conception of the white man’s civilization.”

That assessment aside, the Meskwaki Settlement survived and grew. It now covers 8,000 acres and is home to 800 of the tribe’s 1,300 members.

It wasn’t until 1980 that smallpox was declared eradicated worldwide.

l Comments: d.fannonlangton@gmail.com

For decades, two-player (antagonistic) games on graphs have been a framework of choice for many important problems in theoretical computer science. A notorious one is controller synthesis, which can be rephrased through the game-theoretic metaphor as the quest for a winning strategy of the system in a game against its antagonistic environment. Depending on the specification, optimal strategies might be simple or quite complex, for example having to use (possibly infinite) memory. Hence, research strives to understand which settings allow for simple strategies.

In 2005, Gimbert and Zielonka provided a complete characterization of preference relations (a formal framework to model specifications and game objectives) that admit memoryless optimal strategies for both players. In the last fifteen years however, practical applications have driven the community toward games with complex or multiple objectives, where memory -- finite or infinite -- is almost always required. Despite much effort, the exact frontiers of the class of preference relations that admit finite-memory optimal strategies still elude us.

In this work, we establish a complete characterization of preference relations that admit optimal strategies using arena-independent finite memory, generalizing the work of Gimbert and Zielonka to the finite-memory case. We also prove an equivalent to their celebrated corollary of great practical interest: if both players have optimal (arena-independent-)finite-memory strategies in all one-player games, then it is also the case in all two-player games. Finally, we pinpoint the boundaries of our results with regard to the literature: our work completely covers the case of arena-independent memory (e.g., multiple parity objectives, lower- and upper-bounded energy objectives), and paves the way to the arena-dependent case (e.g., multiple lower-bounded energy objectives).

For Convolutional Neural Network-based object detection, there is a typical dilemma: the spatial information is well kept in the shallow layers which unfortunately do not have enough semantic information, while the deep layers have a high semantic concept but lost a lot of spatial information, resulting in serious information imbalance. To acquire enough semantic information for shallow layers, Feature Pyramid Networks (FPN) is used to build a top-down propagated path. In this paper, except for top-down combining of information for shallow layers, we propose a novel network called Image Pyramid Guidance Network (IPG-Net) to make sure both the spatial information and semantic information are abundant for each layer. Our IPG-Net has two main parts: the image pyramid guidance transformation module and the image pyramid guidance fusion module. Our main idea is to introduce the image pyramid guidance into the backbone stream to solve the information imbalance problem, which alleviates the vanishment of the small object features. This IPG transformation module promises even in the deepest stage of the backbone, there is enough spatial information for bounding box regression and classification. Furthermore, we designed an effective fusion module to fuse the features from the image pyramid and features from the backbone stream. We have tried to apply this novel network to both one-stage and two-stage detection models, state of the art results are obtained on the most popular benchmark data sets, i.e. MS COCO and Pascal VOC.

A classical problem in appointment scheduling, with applications in health care, concerns the determination of the patients' arrival times that minimize a cost function that is a weighted sum of mean waiting times and mean idle times. One aspect of this problem is the sequencing problem, which focuses on ordering the patients. We assess the performance of the smallest-variance-first (SVF) rule, which sequences patients in order of increasing variance of their service durations. While it was known that SVF is not always optimal, it has been widely observed that it performs well in practice and simulation. We provide a theoretical justification for this observation by proving, in various settings, quantitative worst-case bounds on the ratio between the cost incurred by the SVF rule and the minimum attainable cost. We also show that, in great generality, SVF is asymptotically optimal, i.e., the ratio approaches 1 as the number of patients grows large. While evaluating policies by considering an approximation ratio is a standard approach in many algorithmic settings, our results appear to be the first of this type in the appointment scheduling literature.

In this paper, we focus on the task of small-footprint keyword spotting under the far-field scenario. Far-field environments are commonly encountered in real-life speech applications, and it causes serve degradation of performance due to room reverberation and various kinds of noises. Our baseline system is built on the convolutional neural network trained with pooled data of both far-field and close-talking speech. To cope with the distortions, we adopt the multi-task learning scheme with alignment loss to reduce the mismatch between the embedding features learned from different domains of data. Experimental results show that our proposed method maintains the performance on close-talking speech and achieves significant improvement on the far-field test set.

We propose some new mixed finite element methods for the time dependent stochastic Stokes equations with multiplicative noise, which use the Helmholtz decomposition of the driving multiplicative noise. It is known [16] that the pressure solution has a low regularity, which manifests in sub-optimal convergence rates for well-known inf-sup stable mixed finite element methods in numerical simulations, see [10]. We show that eliminating this gradient part from the noise in the numerical scheme leads to optimally convergent mixed finite element methods, and that this conceptual idea may be used to retool numerical methods that are well-known in the deterministic setting, including pressure stabilization methods, so that their optimal convergence properties can still be maintained in the stochastic setting. Computational experiments are also provided to validate the theoretical results and to illustrate the conceptional usefulness of the proposed numerical approach.

Research is showing that the accumulation of sub-concussive hits in sports like football can be just as damaging as one or two major concussions.

Despite multiple concussions, a high school freshman continues to play football. Will family tradition outweigh the risks?

As a small or midsize business (SMB), your company website is often the first touchpoint for potential clients — and you want it to make a great first impression. The secret to hitting home with your audience is to have a sophisticated and lively website design that’s aesthetically pleasing and provides great user experience (UX). […]

The post 20 Company Website Designs to Inspire Your Small Business appeared first on WebFX Blog.

Drink Local In tumultuous times, one thing remains true: People still want their spirits.…

If you've ever been compelled to visit Chewelah, it has likely been related to a trip to 49 Degrees North.…

A durable ambient light curable waterproof liquid rubber coating with volatile organic compound (VOC) content of less than 450 grams per liter made from ethylene propylene diene terpolymer (EPDM) in a solvent, a photoinitiator, an additive, pigments, and fillers, and a co-agent and a method for making the formulation, wherein the formulation is devoid of thermally activated accelerators.

The present disclosure relates to a thermally resistant optical siloxane resin composition including siloxane containing photo-cationically polymerizable epoxy group, a photo initiator, and an antioxidant.

The present invention relates to a method for producing particles of a compound of interest. In a method according to the invention a solution is provided of the compound of interest in a solvent. This solution is thickened or gelled and particles are formed. The invention further relates to a particle that is obtainable by the invention.

A mechanism is provided in a storage device for performing a write operation. The mechanism configures a write buffer memory with a plurality of write buffer portions. Each write buffer portion is dedicated to a predetermined block size category within a plurality of block size categories. For each write operation from an initiator, the mechanism determines a block size category of the write operation. The mechanism performs each write operation by writing to a write buffer portion within the plurality of write buffer portions corresponding to the block size category of the write operation.

The invention relates to a powder resin with amp from 60 to 110° C., and a particle size from 10 to 250 μm, which comprises the reaction product of a reactive composition comprising: a) an isocyanate component comprising a polyisocyanate with functionality of at least 2, b) an alcoholic component, comprising: b1) at least one polyol with OH functionality from 2 to 4, b2) a monoalcohol component comprising: b2.1) a monoalcohol, bearing an ethylenic unsaturation b2.2) a saturated alcohol selected from the group of fatty alcohols, b2.3) optionally, an additional saturated monoalcohol from non fatty monoalcohols the molar ratios of OH functional groups, of the said alcoholic components b2.2) (possibly b2.3)) and b2.1) being defined so that the OH molar ratio of b2.2)/b2.1) or of [b2.2)+b2.3)]/b2.1) ranges from higher than 0.25 to 2, with the proviso that: the resulting said powder resin does bear at least one urethane unit with branched structure resulting from the reaction of an isocyanate component a) with a polyol component b), with said component a) having an average functionality higher than 2 or otherwise (if not higher than 2) the said component b1) having an average functionality higher than 2, with the resulting resin having no any crosslinked structure and being soluble in an organic solvent. The invention does also relate to a powder coating composition comprising the said resin and the resulting coatings and coated substrates for protective or decorative uses.

The invention describes an improved thermally-responsive record material substantially free of aromatic isocyanate yielding an image of high intensity and useful for bar codes. The record material comprises a support having provided thereon a heat-sensitive composition comprising a substantially colorless color former comprising a fluoran; and a developer material selected from the group consisting of 4,4'-diaminodiphenylsulfone and 3,3'-diaminodiphenylsulfone, and an organic acid which upon being heated reacts with said color former to develop color, and including a binder material. Optionally, a modifier compound is included in the heat-sensitive composition. The compound can be selected from the group consisting of a fatty acid amide, such as stearmide. Optionally, magnesium state is included.

The invention describes a thermally-responsive record material substantially free of aromatic isocyanate. The record material comprises a support having provided thereon a heat-sensitive composition comprising a substantially colorless dye precursor comprising a fluoran; and a developer material selected from the group consisting of 4,4'-diaminodiphenylsulfone and 3,3'-diaminodiphenylsulfone in combination with N-[(butylamino)carbonyl]-4-methylbenzene sulfonamide, which upon being heated react with said dye precursor to develop color, and including a binder material.

The invention describes a thermally-responsive record material substantially free of aromatic isocyanate. The record material comprises a support having provided thereon a heat-sensitive composition comprising a substantially colorless dye precursor comprising a fluoran; and a developer material selected from the group consisting of 4,4'-diaminodiphenylsulfone and 3,3'-diaminodiphenylsulfone, which upon being heated react with said dye precursor to develop color, and including a binder material. Optionally, a modifier compound is included in the heat-sensitive composition. The modifier compound can be selected from the group consisting of a fatty acid amide, preferably a saturated fatty acid amide such as an alkyl amide, a bis methylene alkyl amide, or a bis ethylene alkyl amide, or any of 1,2-diphenoxy ethane, dimethyl diphenoxy ethane, and dimethyl phthalate.

A system may include a macro cell base station configured to determine a service quality associated with the macro cell base station; determine whether the service quality is below a quality threshold; and instruct a small cell base station to switch from a sleep mode to an awake mode, when the service quality is below the quality threshold. The system may further include a small cell base station, located within a coverage area of the macro cell base station, configured to enter an awake mode, when instructed to enter the awake mode by the macro cell base station; and inform the macro cell base station that the small cell base station is in awake mode. The macro cell base station may be further configured to hand over one or more user devices to the small cell base station, when the small cell base station is in the awake mode.

The present invention generally relates to use of compounds and compositions as a chemosensitizers and/or radiosensitizers and/or inhibitors of PNKP phosphatase activity. The present invention provides pharmaceutical combinations and/or a pharmaceutically acceptable salt thereof, kits containing such compounds and/composition and methods of using such compounds and/or compositions.

A thermally assisted magnetic recording medium (1) includes a substrate (101), an underlayer (3) that is formed above the substrate (101), and a magnetic layer (107) that is formed on the underlayer (3) and contains an alloy having an L10 structure as a main component. The underlayer (3) is formed by continuously laminating a first underlayer (104) having a BCC structure with a lattice constant that is 0.302 to 0.332 nm, a second underlayer (105) that has a NaCl structure including C, and a third underlayer (106) that is composed of MgO.

A return path section includes first and second yoke portions and first, second and third columnar portions. The first and second yoke portions and the first columnar portion are located on the same side in the direction of travel of the recording medium relative to a wave guide core. The second and third columnar portions are located on opposite sides of a plasmon generator and connected to a shield. The first yoke portion connects a main pole to the first columnar portion. The second yoke portion connects the first columnar portion to the second and third columnar portions. A coil is wound around the first columnar portion.

A method of storing data includes providing a write signal for a write head of a hard disk drive, generating a transition pulse signal derived from the write signal using a transition pulse generator, and generating a logic signal to drive a thermal source associated with the write head of the hard disk drive. The logic signal includes the logical summation of a cyclical base pulse signal and the transition pulse signal.

In a heat-assisted magnetic recording hard disk drive, one or more thermally conductive features are incorporated to assist with dissipation of heat from a laser module that comprises a laser and a submount. The submount may be coupled to the slider with solder covering a wider adhesive area for enhanced conduction of heat away from the laser module and to the slider, one or both of the submount and the laser may include a surface coating that increases the thermal radiation of the corresponding component, and/or one or both of the submount and the laser may include fins configured to transfer heat from the corresponding component. Further, a HAMR HGA may be configured such that the submount is coupled directly to the suspension flexure using a thermally conductive material, for conduction of heat away from the laser module and to the flexure.

In one embodiment, a system includes a robotic accessor for transporting media between multiple storage slots and one or more data storage drives; a controller for controlling the robotic accessor; a memory in communication with and/or integrated with the controller for storing information about the media and the storage slots, the information including data corresponding to a physical distribution of the media in the storage slots; and logic integrated with and/or executable by the controller, the logic being adapted to: position the robotic accessor at a computed optimal position during an idle period of the robotic accessor, the computed optimal position being based at least in part on the physical distribution of the media in the storage slots.

A magnetic recording medium including a substrate, and at least one magnetic layer formed on the substrate. The magnetic layer is formed from an alloy containing Cobalt, and Platinum (Pt). The magnetic layer is also formed from grain boundary segregation materials comprising Manganese Oxide and at least one of Silicon Oxide, Chromium Oxide, and Cobalt Oxide (CoO).

Embodiments of the invention are directed to bearing assemblies configured to effectively provide heat distribution from and/or heat dissipation for bearing element, bearing apparatuses including such bearing assemblies, and methods of operating such bearing assemblies and apparatuses. In an embodiment, a bearing assembly includes a plurality of superhard bearing elements distributed about an axis. Each superhard bearing element of the plurality of superhard bearing elements has a superhard material including a superhard surface. Additionally, a support ring structure that includes a support ring that supports the plurality of superhard bearing elements and a thermally-conductive structure in thermal communication with the superhard table of each of the plurality of superhard bearing elements. The thermally-conductive structure has a higher thermal conductivity than the support ring of the support ring structure.

According to an embodiment of the present invention, a system optimizes an information processing environment, and comprises at least one processor. The system collects information pertaining to operational behavior of the information processing environment and including a plurality of parameters. A neural network structure is established to associate the parameters to a desired operational performance characteristic for the information processing environment. The neural network structure is trained with the collected information from the information processing environment to produce a model for the information processing environment. The model is optimized to determine values for the parameters and the information processing environment is adjusted based on the determined parameter values to attain the desired operational performance of the information processing environment. Embodiments of the present invention further include a method and computer program product for optimizing an information processing environment in substantially the same manner described above.

An apparatus or method which accepts a burst of pulses at a frequency which may not be tightly controlled and converts this into a trajectory command that is a suitable motion profile for an incremental motor control application. The output of the invention can be a pulse stream that can be fed to an existing incremental pulse input motor drive or the invention can be embedded into a motor drive where its output is a numerical sequence that defines a physically realizable trajectory to be fed to the control circuits and software within the motor drive.

An interposer (support substrate) for an opto-electronic assembly is formed to include a thermally-isolated region where temperature-sensitive devices (such as, for example, laser diodes) may be positioned and operate independent of temperature fluctuations in other areas of the assembly. The thermal isolation is achieved by forming a boundary of dielectric material through the thickness of the interposer, the periphery of the dielectric defining the boundary between the thermally isolated region and the remainder of the assembly. A thermo-electric cooler can be used in conjunction with the temperature-sensitive device(s) to stabilize the operation of these devices.

A floorplan for a Structured ASIC chip is shown having a core region containing memory and VCLB logic cells surrounded by a plurality of IO connection fabrics that include a first IO connection fabric comprising IO sub-banks connecting the core of the chip to pins for external signals to the core, a first high-speed routing fabric disposed along the east-west vertical top of the core and connects the core to high-speed IO such as SerDes; a network-aware connection fabric connects the core to a microcontroller primarily for testing and repair of the memory in the core; and a second-high speed routing fabric is disposed on the north-south vertical sides of the core and communicates with the IO sub-banks. The VCLB Structured ASIC chip is manufactured on a 28 nm CMOS process lithographic node or smaller, having several metal layers and preferably is programmed on a single via layer.

An apparatus and method are provided, for alternatively producing either small or bulk packs of napkins from a stack of folded napkins produced by one folding machine, through use of a pack dispatching arrangement having an inlet, a small pack transfer station and a bulk pack transfer station, and configured for operation in a small pack mode for dispatching a stream of spaced apart small packs of folded sheets separated from the stack of folded sheets, and received at an inlet of the pack dispatching arrangement, to the small pack transfer station, and alternatively operable in a bulk pack mode for dispatching a stream of spaced apart bulk packs of folded sheets separated from the stack of folded sheets, and received at an inlet of the pack dispatching arrangement, to the bulk pack transfer station.

Disclosed are new members of a class of non-lipid small molecule inhibitors which interfere with the interaction between phosphoinositol-3,4,5-triphosphate (PIP3) and pleckstrin homology (PH) domains. These molecules target a broad range of PIP3-dependent signaling events in vitro and exert significant anti-tumor activity in vivo, with improved activity and selectivity toward particular PH domains. The small molecule inhibitors of the invention can be used alone or together with tumor necrosis factor (TNF)-related apoptosis-inducing ligand (TRAIL) or other cancer medicament to treat cancer. Small molecule inhibitors of the invention act synergistically in combination with TRAIL and with other Akt inhibitors in treating cancer. Pharmaceutical compositions and methods for treating cancer are provided.

According to an example embodiment, an apparatus is provided that produces a small-step switchable capacitor, which can have steps that are smaller in value than the smallest capacitor used in the system. In one embodiment, an input signal is connected to a switchable capacitor system that includes at least one and/or a plurality of small-step, switchable capacitors. In an example embodiment, a capacitor system may be provided that includes a first capacitance block coupled in series with a second capacitance block. In an example embodiment, the second capacitance block may include one or more switchable capacitors to provide a step in capacitance for the capacitor system between a first setting and a second setting using the one or more switchable capacitors. Also, in an example embodiment, the step in capacitance of the capacitor system may be determined based, at least in part, on a ratio of the capacitance of the second capacitance block to the capacitance of the first capacitance block.

A method of controlling an integrated circuit chip including first and second clock sources, the first clock source being more thermally stable and having a higher power consumption, the integrated circuit chip being operable in a first mode in which the first clock source is inactive and the second clock source active and in a second mode in which the first and second clock sources are active, the method including operating the integrated circuit chip in the first mode; taking a measurement indicative of temperature; if the measurement indicates that the temperature is outside of a temperature band: activating the first clock source so as to operate the integrated circuit chip in the second mode; recalibrating the second clock source against the first clock source; and following the recalibration, deactivating the first clock source so as to return the integrated circuit chip to the first mode.

Provided is a small-sized propeller windmill which can efficiently generate power even when a wing speed is low, has no possibility that the windmill is broken even when a strong wind blows, can stably ensure a weathercock direction of a base blade, and can suppress an environmental burden, in such a propeller windmill, the blade having a corrugated wing shape is supported in a cantilever manner by way of an elastic body, and the blade and the elastic body are made of paper or plastic. Further, to stably ensure the weathercock. direction of the base blade, a weathercock stabilizing mechanism is arranged behind the base blade.

A method for converting heat to electric energy is described which involves thermally cycling an electrically polarizable material sandwiched between electrodes. The material is heated by extracting thermal energy from a gas to condense the gas into a liquid and transferring the thermal energy to the electrically polarizable material. An apparatus is also described which includes an electrically polarizable material sandwiched between electrodes and a heat exchanger for heating the material in thermal communication with a heat source, wherein the heat source is a condenser. An apparatus is also described which comprises a chamber, one or more conduits inside the chamber for conveying a cooling fluid and an electrically polarizable material sandwiched between electrodes on an outer surface of the conduit. A gas introduced into the chamber condenses on the conduits and thermal energy is thereby transferred from the gas to the electrically polarizable material.

A method for converting heat to electric energy is described which involves thermally cycling an electrically polarizable material sandwiched between electrodes. The material is heated using thermal energy obtained from: a combustion reaction; solar energy; a nuclear reaction; ocean water; geothermal energy; or thermal energy recovered from an industrial process. An apparatus is also described which includes an electrically polarizable material sandwiched between electrodes and a heat exchanger for heating the material. The heat source used to heat the material can be: a combustion apparatus; a solar thermal collector; or a component of a furnace exhaust device. Alternatively, the heat exchanger can be a device for extracting thermal energy from the earth, the sun, ocean water, an industrial process, a combustion reaction or a nuclear reaction. A vehicle is also described which comprises an apparatus for converting heat to electrical energy connected to an electric motor.

A fire pit includes a circular bottom plate and a circular, centrally-apertured log-supporting plate. A plurality of legs secured about the periphery of the log-supporting plate maintain the bottom and log-supporting plates in vertically spaced, parallel relation to one another. Each leg has a hollow uppermost end. A plurality of arcuate grates is mounted about the periphery of the log-supporting plate and a vertically-oriented post is secured to each of the grates, mid-length thereof. Each of the posts has a lowermost end slideably received within the hollow uppermost end of its associated leg to releasably connect each grate to the log-supporting plate. Arcuate openings positioned radially outwardly of the central opening enhance the flow of oxygen into the areas where combustion occurs. The log-supporting plate is inverted and the grates are stacked atop it when the fire pit is in its storage configuration.

A well, in particular an open well (14) with an upper end having a vertical axis (101), for containing a liquid and particles contained within said liquid, characterized by comprising at least two manipulation electrodes (1, 2, 3, 31, 32, 36, 17, 40, 41) able to be powered by electrical voltages, in particular alternating electrical voltages, so as to manoeuvre particles within the well by means of the dielectrophoretic effect. A platform comprising a plurality of wells as described above and a method for using said well.

Examples of the present invention include apparatus and methods for monitoring aging of an item. A solid-state structure is located within, adjacent to, or otherwise proximate the item, the solid-state structure including nanostructures. The electrical resistance and/or magnetization of the solid-state structure is determined to determine the degree of aging of the item. In representative examples, the solid-state structure includes nanostructures of a metal, such as a ferromagnetic metal, within a non-magnetic matrix, such as a semimetal, semiconductor, or insulator.

This disclosure relates generally to radio frequency (RF) amplification devices and methods of limiting an RF signal current. Embodiments of the RF amplification device include an RF amplification circuit and a feedback circuit. The RF amplification circuit is configured to amplify an RF input signal so as to generate an amplified RF signal that provides an RF signal current with a current magnitude. The feedback circuit is used to limit the RF signal current. In particular, a thermal sense element in the feedback circuit is configured to generate a sense current, and thermal conduction from the RF amplification circuit sets a sense current level of the sense current as being indicative of the current magnitude of the RF signal current. To limit the RF signal current, the feedback circuit decreases the current magnitude of the RF signal current in response to the sense current level reaching a trigger current level.

A thermally zoned substrate holder including a substantially cylindrical base having top and bottom surfaces configured to support a substrate. A plurality of temperature control elements are disposed within the base. An insulator thermally separates the temperature control elements. The insulator is made from an insulting material having a lower coefficient of thermal conductivity than the base (e.g., a gas- or vacuum-filled chamber).

A countermeasure assembly for an automotive vehicle includes a front side rail extending in a generally longitudinal direction; a bumper having a main bumper member and a bumper extension forming an end portion of the bumper; and a pivot link having front and rear mounting portions. The front mounting portion is pivotably engaged with the bumper extension member to define a front pivot joint, and the rear mounting portion is pivotably engaged with the front side rail to define a rear pivot joint. The rear pivot joint is located rearward and inward from the front pivot joint. The bumper extension is bolted to the forward end of the front side rail. The bumper extension has a front member and a rear member, of which the rear member is bolted to the front side rail. The front member and the rear member of the bumper extension define a hollow box structure.

A front bumper assembly including a bumper beam and two deflectors are provided on right and left sides of the front bumper assembly. The deflectors include hook-shaped portions and telescopic portions. The telescopic portions are received within the front bumper assembly. The hook-shaped portion of the deflector may be engaged by a rigid barrier aligned with the deflectors. In the event of a collision, the rigid barrier engages one of the hook-shaped portions and withdraws the telescopic portion from the front bumper assembly. The deflector is pulsed outwardly to move the front wheel and tire assembly to a tow-in orientation.

A front-end assembly including a deflector and a catcher bracket. The V-shaped deflector is attached to a bumper of a vehicle, a rear leg of the deflector has a distal end disposed adjacent to the frame rail. In a collision, the distal end of the rear leg engages the catcher bracket to reduce intrusion into the passenger compartment of the vehicle.

The invention relates to a molding tool for the production of components composed of fiber composite materials, in which the molding tool has a fiber composite structure and an electrical resistance heating element, whereby carbon fibers or carbon filaments are embedded into the fiber composite structure of the molding tool in a plastic matrix, close to the shaping surface of the molding tool. Such a molding tool is further developed in that the carbon fibers or carbon filaments in the plastic matrix, close to the shaping surface, essentially determine the mechanical strength of the molding tool, and that the electrical resistance heating element is interconnected in such a manner that at least individual sections of the electrical resistance heating element form an electrical parallel circuit with one another.

A way of making small, fragile, decorative handles on a lathe is disclosed along with tools for gluing pen-tubes into these handles is shown. Use of these tools and methods of use allows wood turners to avoid excessive rework and mess associated with the gluing process of making pen blanks while assuring better product due to more complete and uniform distribution of the adhesive layer.

Disengageable chair-lift station having a transfer way made up of a first longitudinal part extending in alignment with the line of the carrying-hauling cable, and of a second transversal part extending perpendicular to the first part. The driving or return pulley is placed between the sections of the first part, and the disembarkation and embarkation platforms are shifted from one another in the second part, so that the disembarkation and embarkation of the skiers are performed on the same side of the station, in a direction perpendicular to the longitudinal axis of the line.