Royal Enfield, the legendary two-wheeler brand is working on several products that are currently in the pipeline. This information was confirmed by Simon Warburton, Royal Enfield's Head of Product...

In addition to the prizes and rewards, Hero MotoCorp may also make it a memorable experience for the participants by putting some of the entries into production.

The Benda Asura 400 comes with a single-sided swingarm, which is quite rare to see on a 400cc motorcycle.

Hero MotoCorp ambulance comes with sleeping arrangements with all the essential equipment. Read along to find more details.

Triumph Motorcycles has said that it has no unsold BS-IV inventories and that it will ensure the availability of BS-VI motorcycles. Triumph aims to have “strong representation across all segments with BSVI compliant motorcycles”.

No, there is no typo in the headline! As many as fourteen new Royal Enfields are currently under consideration. Sounds exciting enough?

Revolt RV400 Review: The era of electric mobility may have just begun as now the Indian two-wheeler market has all-electric products. But what is an electric motorcycle to ride like? Is it comparable to a conventional bike? Find out with us.

A 125cc higher-strung motor in a familiar big bike styling is a genius by Bajaj and one that will ensure that they have a significant market share.

In this story, we aim to explore who exactly is the Suzuki Gixxer 250 aimed at and the good as well as not-so-appealing bits associated with it. This one is a naked street motorcycle and we concentrate first on its good points.

The Federal Road Safety Corps (FRSC) in Niger Sate has said that one person died while four were seriously injured in an accident, which occurred along Minna-Bida road in Bosso Local Government Area, NAN reports. The FRSC Sector Commander, Mr. Joel Dagwa, told journalists in Minna on Saturday that the unfortunate incident, which happened at […]

One dead, four injured as two vehicles crush motorcycle in Minna

The Anti-Vehicle Lifting Cell on Saturday arrested three suspects allegedly involved in various cases of motorcycle theft in parts of Karachi.According to a spokesperson for the AVLC, the suspects were arrested during a series of raids in the Bin Qasim, Malir and Gulshan-e-Iqbal areas. Officials...

The actor bought the BSA Rocket III in 1969 and rode it on his 17-mile commute from Bayswater, London to Pinewood Studios during filming for On Her Majesty's Secret Service.

Royal Enfield, the legendary two-wheeler brand is working on several products that are currently in the pipeline. This information was confirmed by Simon Warburton, Royal Enfield's Head of Product...

Mumbai based auto custom house, Bombay Custom Works, has modified a Jawa Forty Two model, and given it the spirit of adventure. The modified Jawa motorcycle looks like it means business and has an 'anywhere, any weather' kind of attitude.

Since it is said that electric vehicles (EV) will be the future of mobility, automobile manufactures are focusing more on EVs. On the other hand, electric vehicles will not only save our environment as they produce zero emissions, but also save

Yamaha Motors has unveiled the 2020 Bolt cruiser motorcycle. The new (2020) Yamaha Bolt carries forward the same bobber-style retro-theme from its predecessors. The motorcycle is expected to go on sale in international markets by June 2020.

TVS Motor Company appoints former Vice-President and Managing Director for Harley-Davidson Europe as its interim CEO at Norton motorcycles. The once-flourishing UK Motorcycle company went downhill earlier this year after facing an economic disaster. TVS plans to revive the iconic brand

The male white bellbird attracts a mate by singing louder than a jackhammer.

Motorcyclists are involved in 2,500 accidents every year in New Jersey. It is important for all motorcycle drivers to make themselves as visible as possible to other drivers to avoid accidents.

Extreme endurance motorcycle rider to attempt 9th world record, "Greatest Distance on a Motorcycle in 24 Hours (Individual)" this weekend in Uvalde, Texas. Follow live at www.carlreese.net starting on February 24, 2017.

RideClean is an all-in-one premium ultra polisher & sealer and it's made in the USA.

In celebration of National Motorcycle Safety Awareness Month, Personal Injury Attorney Ed Smith Offers Tips to Help Motorcyclists Ride Safely

D. Miller & Associates, PLLC hosted the third annual motorcycle ride to raise money for those affected by traumatic brain injury.

Matthew DeBord/Insider

• I tested a roughly $33,000 Polaris Slingshot R, a three-wheeled "autocycle."
• The three-wheeler category includes vehicles from Can-Am and Harley-Davidson, offering a motorcycle experience in a less demanding package.
• My Slingshot R had a new, Polaris-developed, 203-horsepower engine and an automatic transmission.
• In all but three US states, no motorcycle license is required to operate the Slingshot (New York, Massachusetts, and Alaska continue to require the motorcycle certification).
• The Slingshot is insanely fun, with a modest learning curve — it's a great alternative to a two-wheeler, although the price is definitely steep for the Slingshot R.
• Visit Business Insider's homepage for more stories.

Motorcycles are cool, but they aren't for everybody. Fortunately, there are some alternatives out there that offer an equally compelling, open-air experience.

One of the most popular is the the Polaris Slingshot, manufactured by the Minnesota-based powersports company. Until recently, Slingshots were available only with manual transmissions and GM-sourced engines, but for 2020, Polaris has updated the autocycle with an in-house motor and an automatic.

The automatic transmission in particular really broadens the Slingshot's potential. So I was excited to sample the machine, which I first saw about five years ago.

Polaris was kind enough to loan me a tester for a few weeks. Here's how it went:

The Polaris Slingshot is a three-wheeled autocycle/motorcycle that Polaris industries has produced since 2014. My 2020 Slingshot R tester cost about $33,000 and was outfitted in a menacing red-and-black paint job.

The cheapest Slingshot is about $20,000.

This wasn't my first crack at a Slingshot. Polaris brought the vehicle to Insider's New York offices when the vehicle first launched.

And I generally have a gander at the Slingshot when I visit the annual New York motorcycle show.

See Also:

• All the coolest features of every Tesla vehicle ever made or unveiled, ranked
• Here are 20 cars you can drive off the lot new for less than $20,000
• How Tesla's cargo capacity stacks up against other iconic front trunks in the car industry: From Ferrari, Porsche, Lamborghini, and more

FOLLOW US: On Facebook for more car and transportation content!

A brake apparatus that can achieve front-rear distribution in accordance with a traveling environment variation. At an intermediate point from a start point of a second mode, first interval to an end point of a second mode, second interval, the increasing rate of braking force for a front wheel with respect to an operation amount is changed. The increasing rate of the operation amount prior to the intermediate point can be represented by a first inclination of a curve while the increasing rate of the operation amount after the intermediate point is represented by a second inclination of the curve. The first inclination is less than the second inclination. Setting the increasing rate after an intermediate point to be higher than the increasing rate before the intermediate point, the vehicle body generation deceleration can be caused to increase in a linear proportion to the operation amount.

A motorcycle with an ABS module disposed to make it hard to affect the layout of other components while suppressing the influence of vibration on the ABS module. A motorcycle includes rear frames joined to corresponding rear portions of the main frames and extending upwardly and rearwardly at a position below the corresponding seat frames. Front wheel braking members apply a braking force to a front wheel. An ABS module is connected to the front wheel braking means. A seat is supported on the upper portions of the seat frames. The ABS module has at least a portion disposed below the seat and between the seat frames and the rear frames as viewed from the side. The ABS module is suspended and supported by front and rear cross stays spanned between the pair of seat frames via a front elastic members and a rear elastic member.

A motorcycle tire comprises a tread portion grooved so that twenty narrow annular zones thereof each have a land ratio of 70 to 90%, wherein the twenty narrow annular zones are defined by equally dividing the developed tread width along the tread face by twenty. On each side of the tire equator, main oblique grooves and auxiliary oblique grooves are arranged alternately in the tire circumferential direction and inclined to one tire circumferential direction. The main oblique grooves on each side of the tire equator extend beyond the tire equator to have axially inner ends located on the other side of the tire equator. The auxiliary oblique grooves on each side of the tire equator do not extend beyond the tire equator to have axially inner ends located on the same side of the tire equator.

One embodiment (100) collects air pressure created from forward motion of a motorcycle (300) in a reservoir assembly (1001) which stores a liquid lubricant, is attached to motorcycle frame (302), and comprises a containment chamber (102), cap (106), cap seal (104), air inlet port (107), lubricant outlet port (109), and an air inlet connector (108) and a lubricant outlet connector (110) to facilitate the external attachment of conduit. The air pressure is collected by and delivered to reservoir assembly (100-1) via an air collection conduit (118) attached to motorcycle front portion (306) by a mount (130) and urges liquid lubricant through a suction conduit (124), flow restrictor (112) and delivers lubricant via discharge conduit (114) to a chain applicator (116) attached to a motorcycle swing arm assembly (304) and to the inner circumference of drive chain (310). Lubricant flow ceases after motorcycle is stopped. Other embodiments are described and shown.

A motorcycle boot comprises a sole or tread (22), a rigid shell (20) and an upper (52) associated with the rigid shell; the upper has furthermore a base insole (54) formed by a plurality of tubular channels (56) which extend over most of the bottom surface of the sole (54) and allow the air to pass at right angles to their axis; the shell has at the front an air intake communicating with the front end of the tubular channels.

A motorcycle wheel changing tool is presented that utilizes a rolling carriage that immobilizes the front or back wheel utilizing flat steel swing arms and a tension spring that holds the wheel in place with a knockout retaining rod through the wheel. The entire unit can be rolled and/or lifted in place to work in conjunction with a motorcycle stand. There is a folding handle that expands or contracts to accommodate different size tire/wheel widths and can pull the unit. The rolling wheels can be raised or lowered for different motorcycles depending on the height of the bike in relation to the wheel stand. Additionally, four large eye hooks can be raised or lowered to secure the wheel. Two threaded rods are utilized that secure both angle ends in place to secure the unit so that it is perpendicular to the wheel and keeps the unit from flexing.

An architecture is presented that provides a lightweight durable cover for a motorcycle or other two-wheeled vehicle that protects the seat, sides, and fuel tank portions of the vehicle when not in use. Friction and/or hook and loop fasteners hold the form fitting cover in place on the motorcycle. The cover may be rolled or folded for convenient storage after removed from the motorcycle.

A system for storing a cover for a motorcycle comprises a storage case mounted to a motorcycle, wherein the storage case includes a main housing and a lid, and a storage pouch defining an inner cavity and at least one opening, wherein the storage pouch is configured to be mounted to the lid of the storage case. The system further comprises a cover that is stowable in the inner cavity of the storage pouch in a stowed mode of operation and configured to extend around at least a portion of the motorcycle in a deployed mode of operation, a mounting bracket mountable to an inner surface of the lid of the storage case, and a retaining member including a first portion mountable to the mounting bracket and a second portion mountable to the main housing of the storage case.

An arrangement for adjusting the position of handlebars on a vehicle including a first mechanism for effecting rotation of the handlebars about a first axis in response to a first control signal; a second mechanism for effecting translation of the handlebars along a longitudinal axis in response to a second control signal; and a control system for providing the first and second control signals. In the illustrative embodiment, the inventive system includes a first support secured to the vehicle; a second support operationally coupled to the first support and adapted for rotational movement about a first axis; a first actuator for rotating the second support over an angular extent about the first axis; a third support coupled to the second support for translational movement along a second axis, the second axis being coaxial with a longitudinal axis of the third support and transverse to the first axis; a second actuator for effecting movement of the third support relative to the second support; and a control system for driving the first and second actuators.

A clutch center includes a pressure receiving part and is accommodated inside a clutch housing. A pressure plate includes a pressure applying part disposed at an interval from the pressure receiving part in an axial direction. A clutch portion is disposed between the pressure receiving part and the pressure applying part, and allows and blocks transmission of a power between the clutch housing and the clutch center. A first cam portion is disposed on one side of the clutch center in the axial direction, and increases an engaging force of the clutch portion when a forward drive force acts on a clutch device. A second cam portion is disposed on the other side of the clutch center in the axial direction, and reduces the engaging force of the clutch portion when a reverse drive force acts on the clutch device.

A clutch center includes a pressure receiving part and is accommodated inside the clutch housing. A pressure plate includes a pressure applying part disposed at an interval from the pressure receiving part in an axial direction. A clutch portion is disposed between the pressure receiving part and the pressure applying part, and allows and blocks transmission of a power between the clutch housing and the pressure plate. A first cam portion is disposed on one side of the pressure plate in the axial direction, and increases an engaging force of the clutch portion when a forward drive force acts on a clutch device. A second cam portion is disposed on the other side of the pressure plate in the axial direction, and reduces the engaging force of the clutch portion when a reverse drive force acts on the clutch device.

A blind spot detection system for a motorcycle, which includes an accelerometer, a gyroscope, and a detection device for detecting the presence of a vehicle in at least one blind spot. The accelerometer detects a gravity force vector, and the gyroscope detects the position of the motorcycle relative to the gravity force vector such that a lean angle of the motorcycle is calculated. The detection device is then configured to maintain the same position of the motorcycle relative to the gravity force vector and compensate for the position of the motorcycle if the lean angle is greater or less than 90°, such that the detection device is able to detect the presence of the vehicle in the at least one blind spot, independent of the lean angle of the motorcycle.

DAILY BRIEFING: A motorcyclist dies in the state's north after crashing into the back of a parked truck, and a 29-year-old charged with the murder of Jarrod Leigh Turner pleads not guilty.