CSi Palletizing will be exhibiting its i-Pal palletizing system with integrated stretch wrapper at PACK EXPO 2016.  

Ross SysCon Control Panels are now offered with wireless connection allowing users to access the PLC system using tablets, laptops and smartphones via Ethernet, WLAN or Bluetooth.

Bühler Aeroglide has introduced a complete moisture control system that helps customers maintain a dryer temperature profile and minimize over drying.  

Hardy Process Solutions announced a new version of the HI 6600 Modular Sensor Systems for PROFIBUS-DP control systems.

The Beckhoff Automation booth (S-6302) will be the center of automation technology (AT) and IT convergence at Pack Expo 2017 in Las Vegas.

WP Bakery Technology’s tried and tested control system will be launched on the market in the third generation at the iba 2018.

Beckhoff Automation will demonstrate its new AMP8000 distributed servo drive system alongside a complete lineup of automation hardware, software and networking solutions at Pack Expo 2018 in Chicago.

The Readco Process Control System (RCS) from process equipment manufacturer Readco Kurimoto, LLC, York, Pa., integrates mixing, heating, cooling and feeding into a single, touch-screen HMI.

EXAIR's new Dual 316 Stainless Steel Cabinet Cooler Systems with ETC (Electronic Temperature Control) keep electrical enclosures cool with 20°F (-7°C) air while maintaining the NEMA 4X rating of the enclosure and removing the heat that could adversely affect the internal components.

PEX can be a viable alternative to more traditional materials for fire sprinklers.

NFPA 70 provides the important details for design.

Now that many jurisdictions across the country are mandating fire sprinkler systems in new-home construction, de-signers need to be aware of the requirements and challenges these systems can face in relation to water meters.

How can engineers and contractors design wet fire sprinkler systems equipped to prevent corrosion and dry systems equipped to prevent freezing? That has long been a question central to code requirements and new product development.

Corrosion in fire sprinkler systems can go undetected until it's too late, causing damage or loss of life. Traditional ITM protocols can accelerate corrosion, but new advancements offer better prevention and monitoring for protecting lives and property.

Plumbing & Mechanical Chief Editor Nicole Krawcke had a chance to sit down with Billy Stevens, founder and CEO of Sera Systems, a subscription software provider for the home service industry, to discuss current trends with contractor software.

Gen-Ear LE can pinpoint water leaks in residential and commercial water lines – including problems in walls and under concrete slabs, swimming pools and hot tubs.

Carrier’s lineup of communicating peripherals for the i-Vu building automation system has been expanded to include smart valves with Characterized Control Valve (CCV^T) technology and smart damper actuators. 

The new under sink crossover product combines the efficiency of an on-demand system, with the ease of installation of more conventional, timer-based pumps. 

This system's sensing technology and robust software platform are designed to uncover hidden water system insights and risks, empowering building managers to enhance building performance and occupant experience. 

 Like all Unipipe systems, UnipipeEZ features a proprietary stainless steel clamp ring that bites into the aluminum pipe, creating a connection rated for over five times the pressure of other systems. 

The state-of-the-art facility houses IAPMO R&T’s Oceana research center and product testing laboratory.

The 2021 USHGC is scheduled to be published in early 2021.

A lot of things are out of your control when working on a job involving multiple trades. Whenever I design any type of system, I always go down a list of “what ifs.” The “what ifs” are scenarios that can affect the performance of a system due to an unknown. This includes actions by other trades.

PPI MS-7 includes detailed specifications for four plastic piping materials which have been proven in ground-source heat exchange systems: HDPE, PE-RT, PEX, and PP (PP-R and PP-RCT).

The document addresses the need for enforceable safety provisions for geothermal district ambient temperature loop systems.

designing a wastewater system requires careful consideration of a range of factors to ensure efficient and compliant operation.

Various market forces and trends can influence the decisions plumbers and engineers make regarding those materials and designs. Here are five that should be considered in the coming year.

PEX's shape memory allows it to expand and shrink without compromising its integrity, making it highly resistant to damage in freezing conditions. This has proven to be a lifesaver in areas like Texas during unexpected mid-winter freezes.

Dairy farming is vital for rural communities and household nutrition. Durable materials like REHAU PEXa plumbing systems are essential for dairy barn construction. Three WRC dairy barn projects feature these systems.

Pressure and chlorine ratings revised.

There’s a saying in the environmental health and safety industry: “There are no accidents.” Basically, the idea is this that all accidents can be avoided.

Water is the life-blood of hydronic systems. Just as we strive to maintain the health of our own circulatory systems, it’s important to maintain the health of the water-based solutions that circulate through the hydronic systems we construct and maintain.

Plumbing & Mechanical and PM Engineer Chief Editor Nicole Krawcke sits down with Legionella expert Dr. Janet Stout, PhD, to discuss best practice strategies in the plumbing industry for implementing risk assessments and Water Management Programs.

Water scarcity is a growing issue globally. Some regions are adopting water reuse and rainwater capture solutions. Onsite water reuse can help save money, reduce water demands, and manage stormwater flows. With onsite water reuse, you can reuse up to 95% of a building's wastewater.

With user-friendly plug-in installation and energy-saving thermostat control, the system is ideal for preventing ice from forming inside 3/4-inch to 6-inch diameter water lines in temperatures below -40°F (-40° C).

The simplicity of the patented Centra-lok design is also intended to offer a cost-effective vinyl-by-vinyl containment system for commercial, industrial, and municipal water and wastewater applications.

Recognizing that pipe joints are the most common source of premature leaks and system failures, IPEX has designed Centra-lok to minimize maintenance, repair and installation costs.

Integrated Dynamic Control (IDC) is a PC-based intelligent control system delivering optimized comfort and maximized efficiency by coordinating HVAC, IAQ and hydronic systems in one control.

MrPEX’s Integrated Dynamic Control (IDC) is a PC-based intelligent control system which delivers optimized comfort and maximized efficiency.

Smatrix Pulse is the industry’s first multizone wireless control system for both radiant heating as well as forced-air heating and cooling.

Boiler systems are essential for residential heating and hot water. Their efficiency and longevity depend on good water quality. Poor water quality causes corrosion, scale buildup, and higher costs. Maintaining high water quality ensures smooth operation and durability.

In 1988, Holland, Michigan’s downtown needed revitalization. Merchants were leaving for a nearby indoor mall. Local industrialist Ed Prince proposed installing a snow-melt system for the streets and sidewalks after seeing a similar system in Europe.

The owner asked for a bid to replace her 35-year-old cast iron boiler which was still operating. She had two requirements: Redundancy in the event of a boiler malfunction and lower fuel costs for the building.

When troubleshooting a hydronic system, the piping layout is often confusing. To understand the system, I sometimes sketch the piping to help me visualize the flow of water. 

Troubleshooting hydronic systems can be challenging, as the pipes are hidden behind walls. Your imagination has to help you “see” the routing of the piping. 

Integrated Dynamic Control (IDC) is a PC-based intelligent control system which delivers optimized comfort and maximized efficiency by coordinating HVAC, indoor air quality and hydronic systems in one control. 

REHAU announces the addition of CPVC and copper press adapters to their proprietary EVERLOC+ compression-sleeve fitting system.

Although I’ve worked with hydronic heating for four decades and designed systems around just about every possible heat source, I would be hard-pressed to predict what might be available as hydronic heat sources 25 years from now. 

Several years ago, I had the opportunity of visiting the Mostra Convegno Expocomfort show in Milan, Italy. It ranks right up there with the famous ISH show in Frankfurt, Germany, as a “bucket list” event for those who are passionate about hydronic heating and plumbing.

The overall objective was to create a complete HVAC system, rather than just a heating + cooling system. The system would provide space heating, cooling, domestic hot water, and fresh air ventilation.