Central bank embarks on gold buying spree, adds 25 tonnes to forex reserves

Efforts to document government support benefiting specific sectors or industries have paid scant attention to support given to the non-energy minerals sector. The issue of support for this sector is explored by way of a case study of Australia, a leading producer and exporter of minerals.

Archives, Room Use Only - TK455.P67 1880

In the past three years, Dirac half-metals (DHMs) have attracted considerable attention and become a high-profile topic in spintronics becuase of their excellent physical properties such as 100% spin polarization and massless Dirac fermions. Two-dimensional DHMs proposed recently have not yet been experimentally synthesized and thus remain theoretical. As a result, their characteristics cannot be experimentally confirmed. In addition, many theoretically predicted Dirac materials have only a single cone, resulting in a nonlinear electromagnetic response with insufficient intensity and inadequate transport carrier efficiency near the Fermi level. Therefore, after several attempts, we have focused on a novel class of DHMs with multiple Dirac crossings to address the above limitations. In particular, we direct our attention to three-dimensional bulk materials. In this study, the discovery via first principles of an experimentally synthesized DHM LaNiO3 with many Dirac cones and complete spin polarization near the Fermi level is reported. It is also shown that the crystal structures of these materials are strongly correlated with their physical properties. The results indicate that many rhombohedral materials with the general formula LnNiO3 (Ln = La, Ce, Nd, Pm, Gd, Tb, Dy, Ho, Er, Lu) in the space group R3c are potential DHMs with multiple Dirac cones.

The composition of occupied and unoccupied electronic states in the vicinity of Fermi energies is vital for all materials and relates to their physical, chemical and mechanical properties. This work demonstrates how the combination of resonant and non-resonant X-ray emission spectroscopies supplemented with theoretical modelling allows for quantitative analysis of electronic states in 5d transition metal and metal-oxide materials. Application of X-rays provides element selectivity that, in combination with the penetrating properties of hard X-rays, allows determination of the composition of electronic states under working conditions, i.e. non-vacuum environment. Tungsten metal and tungsten oxide are evaluated to show the capability to simultaneously assess composition of around-band-gap electronic states as well as the character and magnitude of the crystal field splitting.

The Critical Investor discusses recent developments at the company that is exploring the Goliath Gold Project in Ontario.

Visit the aureport.com for more information and for a free newsletter

Maurice Jackson of Proven and Probable speaks with Andy Schectman, president of Miles Franklin Precious Metals Investments, about the present situation with physical precious metals.

Certain vegetables take up heavy metals from contaminated water used for irrigation, a new study finds. The researchers grew vegetables in greenhouses similar to field conditions in Greece and found that concentrations of nickel and chromium increased in potatoes and onions, but not in carrots, when irrigated with water containing contaminant levels similar to those found in industrial wastewater.

Mining metals from landfill sites can be economically viable, a recent project in the US has demonstrated. Approximately 34 352 tonnes of metals, conservatively valued at US$7.42 million (€6.67 million) were recovered from the 8 hectare ashfill site, according to researchers who analysed the project.

The Alang-Sosiya shipbreaking yard in India is highly polluted with heavy metals, a study concludes. The researchers studied heavy metal contamination in sediments taken from the intertidal zone of the shipbreaking yard and compared them to a control site. The area was found to be ‘strongly polluted’ with copper, cobalt, manganese, lead and zinc.

Life cycle assessment (LCA) can measure the environmental impact of the different stages of a ship’s life cycle, from design to dismantling. This assessment focused on the impact of recycling the metal parts of a ship and did not consider the crucial impact of the hazardous materials present on board. The results showed that re-use of metals had environmental benefits, but overall these were small compared to the environmental impact of other life cycle stages, such as operation.

A successful circular economy for valuable metals needs more than just effective recycling technologies, as a new study shows. The research, which explored the governance of recovering vanadium from steel-industry waste, revealed that industry stakeholders feel the prospect of financial gain, or reduced costs, through recovery is too distant at present. This perception could hinder a circular economy for critical materials from industrial residue, the study warns.

Indium, a unique metal, is in short supply worldwide and is not recycled at the end of its life (EoL). Indium is used in a wide range of technologies, causing regions across the world that are reliant on its import — such as Europe — to be concerned about security of supply. Primary sources of indium are thought to be sufficient for medium-term needs, but with growing demand comes growing concern over long-term supply. A new study has conducted a material flow analysis and examined secondary sources of indium within European ‘urban mines’ and in-use stocks (IUS) of indium products, identifying these as potential sources of 500 tonnes of indium — if it were recycled at EoL.

The German Renewable Energy Sources Act was introduced in 2001 to encourage an increase in renewable energy supply. Since then, supply has increased from 7% (in 2001) to 37% (in 2017. Wind energy is an important part of Germany’s renewable energy production — but deploying sufficient turbines to achieve the climate goals requires a large amount of raw materials, many of which are metals in limited supply. This study found copper and dysprosium to be the most critical of these metals, as they could face future bottlenecks and are essential elements in present and future turbine design.

Energy demand is on the rise globally, and this is predicted to continue in coming decades. Increasing energy production to meet this demand requires materials — both metals and non-metal minerals — from a number of countries. As some materials are in short supply, it is important to consider material dependency and availability when developing national energy plans for the future. This study is the first to address material dependency effects on a nation’s energy development plans, with the UK and Turkey as case studies.

Rare earth elements (REEs) are used increasingly often in innovative technologies, causing these elements to enter the natural environment. They can be sourced via deep-sea mining, raising concerns about marine exposure to mining processes and waste products. This study examined how two REEs, lanthanum and yttrium, affected and stressed marine ecosystems, using young marine mussels (Mytilus galloprovincialis) as indicators of water quality. The researchers determine a parameter known as the ‘predicted no effect concentration’ (PNEC) for La and Y — the maximum environmental level of each of the two elements at which no effect is seen on the most sensitive organisms and which is, therefore, deemed safe for the environment.

A study of the pollution caused by ship scrapping in Alang, India, shows significantly higher levels of heavy metal and petroleum hydrocarbons in sediment and seawater, compared to a control site. The researchers also found reduced populations of zooplankton — a critical food source for marine biota — and increased numbers of pathogenic bacteria.

A recent study has assessed the environmental impact of a group of technology-critical elements (TCEs) — niobium (Nb), tantalum (Ta), gallium (Ga), indium (In), germanium (Ge) and tellurium (Te) — that, to date, have been relatively under-researched. The researchers reviewed published concentrations of these elements in environmental archives and evaluated trends over time in surface waters. Overall, they found no evidence that the rising use of these elements in modern technologies is causing environmental concentrations to increase on a global level. These findings are relevant to future policy discussions regarding the source, usage and presence of less-studied TCEs, particularly in relation to critical raw metals.

Deposition of heavy metals and nitrogen is falling across Europe, a new study suggests. The researchers used the levels of these pollutants in mosses as indicators of how deposition has changed from 1990 to 2010. These reductions are likely to be the result of effective air pollution policies, they say.

Researchers have analysed the ability of two organic nanomaterials to remove the heavy metal chromium from water. In the laboratory, the nanomaterials successfully took up around 95% of the chromium. Further work is needed to confirm the feasibility of using these nanomaterials to purify water in real-world conditions.

New Integrated Control Center (ICC) for controlling and monitoring the entire continuous casting plant

･ The world’s first 6-stand tandem cold mill with Hyper UC-mills in all stands ･ Equipped with work roll shift function to enable precise edge profile control of electrical steels ･ Enables Shougang Qian’an to meet the growing demand for electrical steels

Copper prices on Friday traded 0.48 per cent higher at Rs 408.75 per kg in futures market.

In the international market, silver was quoting 1.44 per cent higher at $15.82 per ounce in New York.

Air quality is a critical issue affecting the health of billions of people worldwide, yet often little is known about what is in the air we breathe. To reduce air pollution’s health impacts, pollution sources must first be reliably identified. Otherwise, it is impossible to design and effectively enforce environmental standards. However, urban networks of air quality monitors are often too widely spaced to identify the sources of air pollutants, especially for pollutants that do not disperse far from their sources. Developing high-resolution pollution maps with data from these widely spaced monitors is problematic.

Disclosed is a process for preparing bridged Group 4 metal complexes containing a neutral diene ligand starting from the corresponding novel, metal diene containing complexes by reaction thereof with the divalent derivative of a bridged bidentate ligand compound. The novel, intermediate metal diene complexes, their formation from tetravalent metal salts and an integrated process combining both process steps are claimed.

A carbonylation process for making acetic acid using a metallic co-catalyst composition, effective as a rhodium stabilizer and/or rate promoter, at molar ratios of metal/rhodium of about 0.5 to 40. The process includes reacting methanol with carbon monoxide in the presence of a rhodium-based catalytic metal complex with about 1 to 20 weight percent methyl iodide, less than about 8 weight % water and about 0.5 to about 30 weight percent methyl acetate. The crude acetic acid is flashed and further purified.

A recyclable ring binder apparatus comprises a ring metal incorporating a set of binder rings that are formed of a pair of ring halves. The ring metal can be firmly fastened to a spine section of a binder hardcover by utilizing a post and a small arched snap clamp with a tap. The tap of the snap clamp can be pressed around a neck of the post utilizing a quick release clipping mechanism. The snap clamp can be accessed with an index finger and slid away from the post to remove the ring metal from the hardcover. The ring metal, the hardcover, the snap clamp and the post can be quickly separated into their perspective categories due to the clipping mechanism. Hence, it retains conformance of all components of the ring binder apparatus for recycling without increasing development and production cost.

Volatile liquid precursors are provided for use in the formation of alkali metal-containing materials. The compound includes an alkali metal and an amide ligand and is a liquid at a temperature of less than about 70° C.

Disclosed are electrochemical cells and methods for producing a halide of a non-alkali metal and for electrorefining the halide. The systems typically involve an electrochemical cell having a cathode structure configured for dissolving a hydrogen halide that forms the halide into a molten salt of the halogen and an alkali metal. Typically a direct current voltage is applied across the cathode and an anode that is fabricated with the non-alkali metal such that the halide of the non-alkali metal is formed adjacent the anode. Electrorefining cells and methods involve applying a direct current voltage across the anode where the halide of the non-alkali metal is formed and the cathode where the non-alkali metal is electro-deposited. In a representative embodiment the halogen is chlorine, the alkali metal is lithium and the non-alkali metal is uranium.

The present invention provides a process for recovering valuable metals from precious metal smelting slag, comprising: smelting the precious metal smelting slag and a flux in a top-blown rotary furnace to produce a lead-bismuth alloy, wherein the precious metal smelting slag comprises Au, Ag, Bi and Pb; electrolyzing the lead-bismuth alloy at a current density ranging from 60 to 110 A/m2 to obtain lead cathode and lead anode slime; refining the lead anode slime to produce bismuth and silver-zinc crust, and extracting gold and silver separately from the silver-zinc crust. Through utilizing a top-blown rotary furnace as the smelting apparatus and adjusting the ratio of the flux, the present invention enriches the valuable metals gold, silver, bismuth, lead or the like to lead-bismuth alloy, ensures lower contents of gold, silver, bismuth and lead in the reducing slag and thereby increases the comprehensive recovery rates of gold, silver, bismuth and lead from the precious metal smelting slag.

The invention is directed to a process and apparatus for recovering metals from bottom ash from incineration plants, such as municipal waste incineration plants. The process includes directing a feed containing ash into an oxidizing unit, wherein at least part of the metals is oxidized in the presence of one or more acids and at least one oxygen donor, thus producing a stream comprising metal ions. From this stream the metals of interest are selected and converted into metallic form.

The present invention aims at improving a recovery rate of a positive-pole active substance and preventing a recovery loss of valuable metals when a positive-pole active substance is separated from a lithium ion battery. In the present invention, a material resulting from battery dismantling obtained by dismantling a lithium ion battery is stirred using a surfactant solution, whereby a positive-pole active substance is separated from a positive-electrode substrate. Also, it is preferable that an alkaline solution is added to a positive-electrode material of a material resulting from battery dismantling, thereby dissolving a positive-electrode substrate to which a positive-pole active substance adheres to obtain a slurry containing the positive-pole active substance, and a surfactant solution is added to the slurry to disperse the positive-pole active substance in the slurry, whereby the positive-pole active substance is separated from the alkaline solution.

Carbothermic reduction of magnesium oxide at approximately 2200 degrees Kelvin yields a high temperature mixture of magnesium vapors and carbon monoxide gas. Previous processes have sought to cool or alter the mixture to cause the yield of pure magnesium, which is then used in subsequent processes for its reducing properties. The present invention takes advantage of the stability and inertness of carbon monoxide at elevated temperatures enabling the magnesium vapor/carbon monoxide gas mixture from the carbothermic process to be used directly for the production of other metals at high temperatures. Chromium oxide, manganese oxide, zinc oxide and sulfide, and several other metal compounds can be reduced by the magnesium vapor/carbon monoxide gas mixture at temperatures high enough to prevent the gas mixture from back-reacting to magnesium oxide and carbon.