Aim/Purpose: Compared student academic performance on specific course requirements in a C# programming course across three instructional approaches: traditional, online, and flipped. Background: Addressed the following research question: When compared to the online and traditional instructional approaches, does the flipped instructional approach have a greater impact on student academic performance with specific course requirements in a C# programming course? Methodology: Quantitative research design conducted over eight 16-week semesters among a total of 271 participants who were undergraduate students en-rolled in a C# programming course. Data collected were grades earned from specific course requirements and were analyzed with the nonparametric Kruskal Wallis H-Test using IBM SPSS Statistics, Version 23. Contribution: Provides empirical findings related to the impact that different instructional approaches have on student academic performance in a C# programming course. Also describes implications and recommendations for instructors of programming courses regarding instructional approaches that facilitate active learning, student engagement, and self-regulation. Findings: Resulted in four statistically significant findings, indicating that the online and flipped instructional approaches had a greater impact on student academic performance than the traditional approach. Recommendations for Practitioners: Implement instructional approaches such as online, flipped, or blended which foster active learning, student engagement, and self-regulation to increase student academic performance. Recommendation for Researchers: Build upon this study and others similar to it to include factors such as gender, age, ethnicity, and previous academic history. Impact on Society: Acknowledge the growing influence of technology on society as a whole. Higher education coursework and programs are evolving to encompass more digitally-based learning contexts, thus compelling faculty to utilize instructional approaches beyond the traditional, lecture-based approach. Future Research: Increase the number of participants in the flipped instructional approach to see if it has a greater impact on student academic performance. Include factors beyond student academic performance to include gender, age, ethnicity, and previous academic history.

Aim/Purpose: Electronic examinations have some inherent problems. Students have expressed negative opinions about electronic examinations (e-examinations) due to a fear of, or unfamiliarity with, the technology of assessment, and a lack of knowledge about the methods of e-examinations. Background: Electronic examinations are now a viable alternative method of assessing student learning. They provide freedom of choice, in terms of the location of the examination, and can provide immediate feedback; students and institutions can be assured of the integrity of knowledge testing. This in turn motivates students to strive for deeper learning and better results, in a higher quality and more rigorous educational process. Methodology : This paper compares an e-examination system at FUT Minna Nigeria with one in Australia, at the University of Tasmania, using case study analysis. The functions supported, or inhibited, by each of the two e-examination systems, with different approaches to question types, cohort size, technology used, and security features, are compared. Contribution: The researchers’ aim is to assist stakeholders (including lecturers, invigilators, candidates, computer instructors, and server operators) to identify ways of improving the process. The relative convenience for students, administrators, and lecturer/assessors and the reliability and security of the two systems are considered. Challenges in conducting e-examinations in both countries are revealed by juxtaposing the systems. The authors propose ways of developing more effective e-examination systems. Findings: The comparison of the two institutions in Nigeria and Australia shows e-examinations have been implemented for the purpose of selecting students for university courses, and for their assessment once enrolled. In Nigeria, there is widespread systemic adoption for university entrance merit selection. In Australia this has been limited to one subject in one state, rather than being adopted nationally. Within undergraduate courses, the Nigerian scenario is quite extensive; in Australia this adoption has been slower, but has penetrated a wide variety of disciplines. Recommendations for Practitioners: Assessment integrity and equipment reliability were common issues across the two case studies, although the delivery of e-examinations is different in each country. As with any procedural process, a particular solution is only as good as its weakest attribute. Technical differences highlight the link between e-examination system approaches and pedagogical implications. It is clear that social, cultural, and environmental factors affect the success of e-examinations. For example, an interrupted electrical power supply and limited technical know-how are two of the challenges affecting the conduct of e-examinations in Nigeria. In Tasmania, the challenge with the “bring your own device” (BYOD) is to make the system operate on an increasing variety of user equipment, including tablets. Recommendation for Researchers: The comparisons between the two universities indicate there will be a productive convergence of the approaches in future. One key proposal, which arose from the analysis of the existing e-examination systems in Nigeria and Australia, is to design a form of “live” operating system that is deployable over the Internet. This method would use public key cryptography for lecturers to encrypt their questions online. Impact on Society : If institutions are to transition to e-examinations, one way of facilitating this move is by using computers to imitate other assessment techniques. However, higher order thinking is usually demonstrated through open-ended or creative tasks. In this respect the Australian system shows promise by providing the same full operating system and software application suite to all candidates, thereby supporting assessment of such creative higher order thinking. The two cases illustrate the potential tension between “online” or networked reticulation of questions and answers, as opposed to “offline” methods. Future Research: A future design proposition is a web-based strategy for a virtual machine, which is launched into candidates’ computers at the start of each e-examination. The new system is a form of BYOD externally booted e-examination (as in Australia) that is deployable over the Internet with encryption and decryption features using public key cryptography (Nigeria). This will allow lecturers to encrypt their questions and post them online while the questions are decrypted by the administrator or students are given the key. The system will support both objective and open-ended questions (possibly essays and creative design tasks). The authors believe this can re-define e-examinations as the “gold standard” of assessment.

Aim/Purpose: The present study investigated and compared students’ attention in terms of time-on-task and number of distractors between using a touchscreen and a pen tablet in mathematical problem-solving activities with virtual manipulatives. Background: Although there is an increasing use of these input devices in educational practice, little research has focused on assessing student attention while using touchscreens or pen tablets in a mathematics classroom. Methodology: A qualitative exploration was conducted in a public elementary school in New Taipei, Taiwan. Six fifth-grade students participated in the activities. Video recordings of the activities and the students’ actions were analyzed. Findings: The results showed that students in the activity using touchscreens maintained greater attention and, thus, had more time-on-task and fewer distractors than those in the activity using pen tablets. Recommendations for Practitioners: School teachers could employ touchscreens in mathematics classrooms to support activities that focus on students’ manipulations in relation to the attention paid to the learning content. Recommendation for Researchers: The findings enhance our understanding of the input devices used in educational practice and provide a basis for further research. Impact on Society: The findings may also shed light on the human-technology interaction process involved in using pen and touch technology conditions. Future Research: Activities similar to those reported here should be conducted using more participants. In addition, it is important to understand how students with different levels of mathematics achievement use the devices in the activities.

Aim/Purpose: This paper provides a review of previously published work related to active learning in information systems (IS) courses. Background: There are a rising number of strategies in higher education that offer promise in regards to getting students’ attention and helping them learn, such as flipped classrooms and offering courses online. These learning strategies are part of the pedagogical technique known as active learning. Active learning is a strategy that became popular in the early 1990s and has proven itself as a valid tool for helping students to be engaged with learning. Methodology: This work follows a systematic method for identifying and coding previous research based on an aspect of interest. The authors identified and assessed research through a search of ABI/Inform scholarly journal abstracts and keywords, as well as additional research databases, using the search terms “active learning” and “information systems” from 2000 through June 2016. Contribution: This synthesis of active learning exercises provides guidance for information technology faculty looking to implement active learning strategies in their classroom by demonstrating how IS faculty might begin to introduce more active learning techniques in their teaching as well as by presenting a sample teaching agenda for a class that uses a mix of active and passive learning techniques to engage student learning. Findings: Twenty successful types of active learning exercises in IS courses are presented. Recommendations for Practitioners : This paper offers a “how to” resource of successful active learning strategies for IS faculty interested in implementing active learning in the classroom. Recommendation for Researchers: This work provides an example of a systematic literature review as a means to assess successful implementations of active learning in IS. Impact on Society: An updated definition of active learning is presented as well as a meaningful list of exercises that encourage active learning both inside and outside of the IS classroom. Future Research: In relation to future research, this study highlights a number of opportunities for IS faculty in regards to new active learning activities or trends to study further.

Aim/Purpose: To identify positive and negative aspects for learning of interactive tablet technology learning activities that promote student engagement and learning. Background: Engaging students in mathematics classes is an on-going challenge for teachers. In 2008 we were offered the opportunity to run interactive activities with a class set of tablet PCs that had just been released on to the market. Since then, we have run these interactive activities continuously with mathematics classes for computing students, albeit with two changes in hardware. Methodology: In the interactive activities, students submit full worked solutions to various problem types (classified as table, text, open or multi-choice) which can then be displayed to the class anonymously, discussed and annotated by the teacher. We surveyed student and staff perceptions and monitored academic performance. Contribution: We have over 10 years of results, observations, and experience from 2008, when tablet technologies were new and expensive, to the current time, when modern tablets with styli are now affordable. Findings: There was a significant increase in higher grades although pass rates did not increase significantly. Over the ten year period of the study, perceptions of students and staff about how this technology impacted on student learning were consistently positive. The majority of students found all problem types useful for learning even those they rated “too hard” or “too easy”. Benefits included increased feedback, peer learning and engagement. Recommendations for Practitioners: We recommend using tablet learning activities to engage students and teachers and to contribute to learning. Impact on Society: This study shows how using tablet technologies for interactive classroom activities can enable and enhance known pedagogies of feedback, peer instruction, and student engagement for mathematics classes. Future Research: We recommend extending this study to include larger classes, and other technical subjects that use symbols and diagrams. In addition, we suggest considering control groups.

Aim/Purpose: The goal of this paper is to examine whether having female robotics teachers positively impacts girls’ performance on programming and robotics tasks Background: Women continue to be underrepresented in the technical STEM fields such as engineering and computer science. New programs and initiatives are needed to engage girls in STEM beginning in early childhood. The goal of this work is to explore the impact of teacher gender on young children’s mastery of programming concepts after completing an introductory robotics program. Methodology: A sample of N=105 children from six classrooms (2 Kindergarten, 2 first grade, and 2 second grade classes) from a public school in Somerville, Massachusetts, participated in this research. Children were taught the same robotics curriculum by either an all-male or all-female teaching team. Upon completion of the curriculum, they completed programming knowledge assessments called Solve-Its. Comparisons between the performance of boys and girls in each of the teaching groups were made. Findings: This paper provides preliminary evidence that having a female instructor may positively impact girls’ performance on certain programming tasks and reduce the number of gender differences between boys and girls in their mastery of programming concepts. Recommendations for Practitioners: Practitioners should expose children to STEM role-models from a variety of backgrounds, genders, ethnicities, and experiences. Future Research: Researchers should conduct future studies with larger samples of teachers in order to replicate the findings here. Additionally, future research should focus on collecting data from teachers in the form of interviews and surveys in order to find out more about gender-based differences in teaching style and mentorship and the impact of this on girls' interest and performance in STEM.

Aim/Purpose: The dynamic nature of the information systems (IS) field presents educators with the perpetual challenge of keeping course offerings current and relevant. This paper describes the process at a College of Business (COB) to redesign the introductory IS course to better prepare students for advanced business classes and equip them with interdisciplinary knowledge and skills demanded in today’s workplace. Background: The course was previously in the Computer Science (CSC) Department, itself within the COB. However, an administrative restructuring resulted in the CSC department’s removal from the COB and left the core course in limbo. Methodology: This paper presents a case study using focus groups with students, faculty, and advisory council members to assess the value of the traditional introductory course. A survey was distributed to students after implementation of the newly developed course to assess the reception of the course. Contribution: This paper provides an outline of the decision-making process leading to the course redesign of the introductory IS course, including the context and the process of a new course development. Practical suggestions for implementing and teaching an introductory IS course in a business school are given. Findings: Focus group assessment revealed that stakeholders rated the existing introductory IS course of minimal value as students progressed through the COB program, and even less upon entering the workforce. The findings indicated a complete overhaul of the course was required. Recommendations for Practitioners: The subject of technology sometimes requires more than a simple update to the curriculum. When signs point to the need for a complete overhaul, this paper gives practical guidance supplemented with relevant literature for other academicians to follow. Recommendation for Researchers: Students are faced with increasing pressure to be proficient with the latest technology, in both the classroom where educators are trying to prepare them for the modern workplace, as well as the organization which faces an even greater pressure to leverage the latest technology. The newly designed introductory IS course provides students, and eventually organizations, a better measure of this proficiency. Future Research: Future research on the efficacy of this new course design should include longitudinal data to determine the impact on graduates, and eventually the assessment of those graduates’ performance in the workplace.

Aim/Purpose: This paper reports on a case study project which had three goals; to develop a suite of original interactive digital skills e-tutorials to be embedded in undergraduate and postgraduate courses; to evaluate the students’ experience and engagement with the e-tutorials over one semester; and to explore their general attitudes towards online and blended learning. Background: Online and blended learning modes continue to grow in popularity in higher education, with the aim of streamlining and enhancing student learning, supporting collaboration and creativity, and equipping students with the skills they will require to work and live in an increasingly digitized world. This practice-based case study highlights factors which positively and negatively affect user engagement with digital learning objects and explores students’ perceptions of the role of online learning within their academic programs. Methodology: A suite of nine interactive e-tutorials, addressing essential digital literacy skills for university students, was developed through instructor and student peer collaboration using Articulate software, informed by best practice. The e-tutorials were embedded in the institutional Learning Management System for three undergraduate and postgraduate courses, in which digital literacy formed the core learning content, to complement classroom-based learning. Students in these courses were surveyed via SurveyMonkey about their specific experience of using the e-tutorials, as well as their general perceptions of digital literacy and online learning. Eighty-six students in total completed the questionnaire, which consisted of twenty-three closed- and open-ended questions. Contribution: Through highlighting both the positive and the challenging aspects of the students’ reported experience of online learning, this case study contributes useful insights to the body of literature on user engagement with digital learning objects in higher education, as well as students’ perceptions and experience of blended learning. Findings: The e-tutorials were perceived as valuable in reinforcing classroom learning, allowing respondents to revise concepts and materials covered in face-to-face classes, at their own pace and in their own time. Survey responses showed that the accessibility, ease-of-use, design and duration of the e-tutorials were deemed effective in terms of user engagement; however, several technological challenges were identified, such as browser incompatibility, uneven sound quality and general Internet connection issues, which disrupted their learning. Overall, students expressed enjoyment of the learning facilitated by the e-tutorials; however, rather than favoring online learning alone, they expressed a preference for a blended learning environment, with a combination of complementary learning approaches; survey respondents did not generally wish to forego face-to-face classes entirely. Recommendations for Practitioners: Instructors should seek to strategically embed interactive digital learning objects in their courses at defined points of need in a logical structure, e.g., to reinforce classroom-based learning, or to support specific skill development. Potential disruption to learning should be minimized by following best practice guidelines to ensure ease of access, a seamless user experience, and timely feedback, as well as providing adequate support for rapid resolution of technical glitches. Recommendation for Researchers: E-tutorials offer a useful means of exploring ways in which students acquire learning in the digital environment. A wider, collaborative exploration is needed to provide comparative studies which move beyond case studies. Impact on Society: Online learning mechanisms, such as e-tutorials, offer students different means of acquiring essential literacy skills and different ways to interact with content. E-tutorials constitute reusable learning objects, which can be accessed as just-in-time delivery modes, when students perceive they need to review particular skills or reinforce learning material. Future Research: This research is now expanding into different types of reusable learning objects. E-tutorials may be developed in multiple ways, and comparative research around e-tutorial models will deepen our understanding of how students interact with content in formal learning contexts. As the digital educational landscape continues to expand alongside traditional face-to-face and analogue learning modes, a key research focus will be student and instructor perceptions and experience of blended learning in different contexts.

Aim/Purpose: Although many computer science measures have been proposed, visualizing individual students’ capabilities is difficult, as those measures often rely on specific tools and methods or are not graded. To solve these problems, we propose a rubric for measuring and visualizing the effects of learning computer programming for elementary school students enrolled in computer science education (CSE), which is independent of the programming language being used. Background: In this research, we proposed a rubric based on existing CSE standards and criteria having a programming education-learning goal. We then applied this rubric to actual lessons to visualize the educational effects. Methodology: The proposed new rubric for teaching computer programming, based on existing standards and criteria, was applied to fourth- and sixth-grade students in Japan. We assessed which skills were cultivated through quizzes before and after the teaching. Contribution: This paper contributes on how to make and utilize a rubric for programming education in computer science. We evaluated and visualized the proposed rubric’s learning effects on children and found that our proposed rubrics are independent of any particular method or tool. Findings: The results of this survey are twofold: (1) we proposed a rubric of programming education in computer science, independent of the programming tools used and (2) we succeeded in visualizing students’ learning stages by applying the proposed rubric to programming education conducted in a Japanese elementary school. Recommendations for Practitioners: Evaluating educational effects in CSE is important. In particular, graded assessments of learner abilities can reveal individual characteristics. This research is useful for assessing CSE because it focuses specifically on programming education. Recommendation for Researchers: The rubric’s suggestions and quality improvements in CSE help learners assess their learning progress and will clarify the cultivated computer science skills. Impact on Society: This research evaluates CSE based on a rubric in the programming education field. Future Research: Future work is needed to improve the proposed rubric’s quality and relevance. Also, this rubric should be applied to many classes to increase the number of evaluations and analyses.

Aim/Purpose: This paper presents a study about changes in computer science and software engineering students’ perceptions of their soft skills during their progress through the Computer Science Soft Skills course. Background: Soft skills are often associated with a person’s social, emotional and cognitive capabilities. Soft skills are increasingly sought out and are well recognized by employers alongside standard qualifications. Therefore, high importance is attributed to soft skills in computer science and software engineering education. Methodology: Content analysis was applied to interpret, categorize and code statements from students’ course assignment answers. Data analysis was performed gradually at the three main stages of the course and by the two students’ study populations. Contribution: The paper highlights the variety of (a) soft skills that can be learnt in one course, both on the individual level and on the team level and (b) assignments that can be given to students to increase their awareness and motivation to practice and learn soft skills. Findings: Data analysis revealed the following: (a) five individual soft skills categories, with 95 skills, and five team-related soft skills categories, with 52 skills (in total, the students mentioned 147 soft skills); (b) course assignments and particularly team-based activities elicited student awareness of their individual soft skills, both as strengths and weaknesses; (c) students developed their reflection skills, particularly with respect to team-related soft skills; and (d) significant differences exist between the two groups of students in several categories. Recommendations for Practitioners: It is important to provide undergraduate students with opportunities to integrate soft skills during their training. Establishing a meaningful learning process, such as project-based learning, enables students to apply and develop soft skills when accompanied by reflective thought processes. Recommendation for Researchers: A similar course can be taught and be accompanied by similar analysis of students’ learning outcomes, to examine the influence of local culture on the characteristics of soft skills. Impact on Society: Increased awareness of soft skills in scientists and engineers’ undergraduate education. University graduates who will strengthen their variety of soft skills in their academic training process and will be more meaningful employees in the workplace and in society. Future Research: Our future research aims (a) to explore additional innovative ways to increase students’ learning processes, awareness and practices in relation to soft skills and (b) to research how students’ soft skills are developed during the entire undergraduate studies both on the individual level and the team level.

Aim/Purpose: The current study was conducted to investigate the students’ perceived satisfaction with the use of a semantic-based online laboratory, which provides students with a search mechanism for laboratory resources, such as instruments and devices. Background: The increasing popularity of using online teaching labs, as an important element of experiential learning in STEM education, is because they represent a collection of integrated tools that allow students and teachers to interact and work collaboratively, whereas they provide an enriched learning content delivery mechanism. Moreover, several research studies have proposed various approaches for online teaching laboratories. However, there are hardly any studies that examine the student satisfaction provided by online laboratories based on students’ experiential learning. Methodology: To measure the effectiveness of the laboratory, we performed a case study in a Computer Fundamentals online course in which undergraduate students were able to manage devices and instruments remotely. Participants were a sample of 50 third semester students of Bachelor’s degree in Information Technology Administration who were divided in experimental and control groups (online laboratory vs. traditional manner). Given a laboratory assignment, students were able to carry out the management of devices and instruments through a LabView virtual environment and web services. The data of the experiment were collected through two questionnaires from both groups. The first is a system usability score (SUS) questionnaire concerning lab usability and the second one students’ cognitive load. Contribution: The results of the study showed a high correlation between usability and cognitive load-satisfaction of students who used the online teaching laboratory compared to the students who did not use it. Findings: On the one hand, the online laboratory provided students with an easy way to share and deploy instruments and devices, thus enhancing system usability. On the other hand, it offered important facilities which enabled students to customize the search for instruments and devices, which certainly had a positive impact on the relationship between cognitive load and satisfaction. Recommendations for Practitioners: In this work we propose an intuitive laboratory interface as well as easiness to use but challenging and capable of providing similar experiences to the traditional laboratory. Recommendation for Researchers: This study is one of the first to analyze the cognitive load-satisfaction relationship and compare it with usability scores. Impact on Society: Our analyses make an important contribution to the literature by suggesting a correlation analysis comparing the results of experimental and control groups that participated in this research work, in terms of usability and cognitive load-satisfaction. Future Research: Future work will also investigate other methodological aspects of instructional design with the aim to improve personalized learning and reinforce collaborative experiences, as well as to deal with problems related to laboratory access, such as authentication, scheduling, and interoperability.

Aim/Purpose: In this paper, we present our experience in design and delivery of a graduate Information Systems Management (ISM) course in an online MBA program. Also presented are a detailed examination of the design and delivery of the online course, survey results of students’ perceptions and backgrounds, course evaluation results, best practices and lessons learned, and potential changes and future actions. Background: This graduate ISM course needs to not only cover a broad range of dynamic technology and business topics, but also strike a balance between the width and depth of the content. Effective course design and delivery are critical to improved teaching and learning, especially when the course is delivered online. Methodology: We provided a comprehensive review of the related literature to develop guidelines for the design and delivery of our ISM course; we collected survey data to evaluate the students’ backgrounds and their perceptions of the course; we used data analysis and content analysis methods to assess the course evaluation results. Contribution: A review of the related literature indicates that IS researchers and educators have not adequately studied online graduate education. Given the importance of the graduate ISM course in most MBA programs, and the lack of attention from the IS community, it is critical to address this gap in the research. We believe we have done so with this paper. Findings: The paper’s major findings are embedded in a detailed examination of the design and delivery of the online course, survey results of students’ perceptions and backgrounds, course evaluation results, best practices and lessons learned, and potential changes and future actions. Recommendations for Practitioners: Even though our experience may not be fully applicable to other institutions, we hope our IS colleagues can learn from the design and delivery of this online course, as well as our best practices and lessons learned to improve the teaching and learning effectiveness in IS online graduate education, in general. Furthermore, we provide instructors with an actionable framework onto which they can map their current course offering, and compare their current pedagogical offering to literature driven best practices for ISM courses, in particular. Recommendation for Researchers: It is our hope that the design and delivery of this online course, and our best practices and lessons learned can inspire our IS colleagues to search for innovative ways to improve the teaching and learning effectiveness in IS online graduate education. In addition, we distill a literature driven framework for ISM courses design and delivery that can help researchers frame their pedagogical research questions. Impact on Society: The online course in this study prepares students for more efficiently and effectively delivering IT systems in organizations. Many MBA students work for non-profits and other socially-focused organizations and are able to use the skills learned in the course for the betterment of society. Future Research: We will continue to monitor the impact of the changes on student learning effectiveness and attempt to identify additional innovative ways to improve the design and delivery of this online ISM course.

Aim/Purpose: Students tend to learn best when an array of learning styles is used by instructors. The purpose of this paper is to add, to introduce, and to apply the concepts of kinesthetic learning and learning structures to university and STEM education. Background: The study applies the concept of kinesthetic learning and a learning structure called Think-Pair-Share to an experiential exercise about Moore’s Law in an introductory MIS classroom. The paper details the exercise and each of its components. Methodology: Students in two classes were asked to complete a short survey about their conceptual understanding of the course material before and after the experiential exercise. Contribution: The paper details the benefits of kinesthetic learning and learning structures and discusses how to apply these concepts through an experiential exercise used in an introductory MIS course. Findings: Results indicate that the kinesthetic learning activity had a positive impact on student learning outcomes. Recommendations for Practitioners: University educators can use this example to structure several other learning activities that apply kinesthetic learning principles. Recommendation for Researchers: Researchers can use this paper to study more about how to incorporate kinesthetic learning into education, and about teaching technology concepts to undergraduate students through kinesthetic learning. Impact on Society: The results of this study may be extremely beneficial for the university and STEM community and overall academic business community. Future Research: Researchers should consider longitudinal studies and other ways to incorporate kinesthetic learning activities into education.

Aim/Purpose: One of the main objectives of higher education institutions is to provide a high-quality education to their students and reduce dropout rates. This can be achieved by predicting students’ academic achievement early using Educational Data Mining (EDM). This study aims to predict students’ final grades and identify honorary students at an early stage. Background: EDM research has emerged as an exciting research area, which can unfold valuable knowledge from educational databases for many purposes, such as identifying the dropouts and students who need special attention and discovering honorary students for allocating scholarships. Methodology: In this work, we have collected 300 undergraduate students’ records from three departments of a Computer and Information Science College at a university located in Saudi Arabia. We compared the performance of six data mining methods in predicting academic achievement. Those methods are C4.5, Simple CART, LADTree, Naïve Bayes, Bayes Net with ADTree, and Random Forest. Contribution: We tested the significance of correlation attribute predictors using four different methods. We found 9 out of 18 proposed features with a significant correlation for predicting students’ academic achievement after their 4th semester. Those features are student GPA during the first four semesters, the number of failed courses during the first four semesters, and the grades of three core courses, i.e., database fundamentals, programming language (1), and computer network fundamentals. Findings: The empirical results show the following: (i) the main features that can predict students’ academic achievement are the student GPA during the first four semesters, the number of failed courses during the first four semesters, and the grades of three core courses; (ii) Naïve Bayes classifier performed better than Tree-based Models in predicting students’ academic achievement in general, however, Random Forest outperformed Naïve Bayes in predicting honorary students; (iii) English language skills do not play an essential role in students’ success at the college of Computer and Information Sciences; and (iv) studying an orientation year does not contribute to students’ success. Recommendations for Practitioners: We would recommend instructors to consider using EDM in predicting students’ academic achievement and benefit from that in customizing students’ learning experience based on their different needs. Recommendation for Researchers: We would highly endorse that researchers apply more EDM studies across various universities and compare between them. For example, future research could investigate the effects of offering tutoring sessions for students who fail core courses in their first semesters, examine the role of language skills in social science programs, and examine the role of the orientation year in other programs. Impact on Society: The prediction of academic performance can help both teachers and students in many ways. It also enables the early discovery of honorary students. Thus, well-deserved opportunities can be offered; for example, scholarships, internships, and workshops. It can also help identify students who require special attention to take an appropriate intervention at the earliest stage possible. Moreover, instructors can be aware of each student’s capability and customize the teaching tasks based on students’ needs. Future Research: For future work, the experiment can be repeated with a larger dataset. It could also be extended with more distinctive attributes to reach more accurate results that are useful for improving the students’ learning outcomes. Moreover, experiments could be done using other data mining algorithms to get a broader approach and more valuable and accurate outputs.

Aim/Purpose: This study aimed to reveal the effect of the previous Internet-based education (IBE) experiences of the students’ readiness, attitude, and self-control / self-management variables towards the e-learning process, and also to determine their opinions. Background: The institutions have made efforts to ensure the continuity of education through their learning management systems and the necessity of addressing the e-learning process from the perspective of students once again showed itself as an undeniable fact. Accordingly, the necessity to consider holistically the variables of readiness, attitude, and self-control/self-management, which affect students’ adaptation to e-learning process, has once again emerged based on the relevant literature. Methodology: This research based on the simultaneous mixed method considering the previous IBE experiences of 75 Computer Education and Instructional Technology (CEIT) students taking part in the study in Turkey. The quantitative results of the study were analyzed based on the single-group pretest-posttest weak experimental design. Qualitative results were obtained through the structured interview form and set an example for the case study. Contribution: The results showed that regardless of students’ previous Internet-based education (IBE) experience, it is seen that increasing and continuous experience has a significant effect on the readiness, attitude and self-control / self-management variables towards the e-learning process. The main contribution of experimental results showed that IBE experience is effective on individuals’ perceptions of internet self-efficacy, and has an impact on the self-learning skills of individuals. In addition to this, the e-learning experience has an impact on individuals’ self-evaluation. It is also seen that the certificate presented to learners in the e-learning environment has a positive effect on students’ attitudes towards e-learning processes. Finally, the experiences of e-learning processes, the methods used to transfer the content in the learning environment, the motivation and feedback provided to the learner also support the significant difference obtained in terms of readiness, attitude and self-control / self-management. Findings: After the findings were analyzed holistically in depth, it has been observed that; if the contents offered to students in e-learning environments support their professional development, in this case, their attitudes, readiness (excluding the sub-dimension of learner control), and self-control/self-management skills for these environments differ significantly in the posttest. It is also among the results that students having previous IBE experience have not higher awareness levels on online communication self-efficacy, technology use self-efficacy, readiness for e-learning, e-learning predisposition, self-reinforcement, self-control management, although significantly found. The findings regarding the effectiveness of the experimental process are as follows: Although it is possible for the students having previous IBE experience to use these experiences within the course for their personal development, it has been seen that the observed differences regarding students’ readiness, attitude, and self-control/self-management towards e-learning processes arise from the experimental operation. Recommendations for Practitioners: It is recommended for the policy-makers and practitioners that while e-learning platforms were designing, using different methods for delivering the content is as important as making the interaction meaningful and sustainable. In addition to this, to develop a positive attitude it is recommended that individuals’ participation of an e-learning platform should be supported with a certificate. Recommendation for Researchers: Researchers should test the obtained results by a well-structured e-learning platform with their recorded activities on the platform (e.g. in which section was used mostly by a learner etc.). Hence, the impact of IBE experiences might be discussed in an up level framework. Impact on Society: Actually, this study is based on a mix design and the results were also meaningful especially considering the implacable global pandemic. It is clearly understood by this process that e-learning is very important. In line with this, to support the e-learning process (e.g. with the method while delivering the content, well-structured feedback, motivation strategies etc.) and make it sustainable, the increasing of individual’s readiness, attitude, and self-control through the IBE would be indispensable. Future Research: Future studies might focus on the longitudinal methods. It is worth to find out how the students experiences affect the sustainability of the course content, and what should the program developer make to improve their course content in line with the findings of longitudinal studies.

Aim/Purpose: This study seeks to understand the various ways information systems (IS) students experience introductory programming to inform IS educators on effective pedagogical approaches to teaching programming. Background: Many students who choose to major in information systems (IS), enter university with little or no experience of learning programming. Few studies have dealt with students’ learning to program in the business faculty, who do not necessarily have the computer science goal of programming. It has been shown that undergraduate IS students struggle with programming. Methodology: The qualitative approach was used in this study to determine students’ notions of learning to program and to determine their cognitive processes while learning to program in higher education. A cohort of 47 students, who were majoring in Information Systems within the Bachelor of Commerce degree programme were part of the study. Reflective journals were used to allow students to record their experiences and to study in-depth their insights and experiences of learning to program during the course. Using phenomenographic methods, categories of description that uniquely characterises the various ways IS students experience learning to program were determined. Contribution: This paper provides educators with empirical evidence on IS students’ experiences of learning to program, which play a crucial role in informing IS educators on how they can lend support and modify their pedagogical approach to teach programming to students who do not necessarily need to have the computer science goal of programming. This study contributes additional evidence that suggests more categories of description for IS students within a business degree. It provides valuable pedagogical insights for IS educators, thus contributing to the body of knowledge Findings: The findings of this study reveal six ways in which IS students’ experience the phenomenon, learning to program. These ways, referred to categories of description, formed an outcome space. Recommendations for Practitioners: Use the experiences of students identified in this study to determine approach to teaching and tasks or assessments assigned Recommendation for Researchers: Using phenomenographic methods researchers in IS or IT may determine pedagogical content knowledge in teaching specific aspects of IT or IS. Impact on Society: More business students would be able to program and improve their logical thinking and coding skills. Future Research: Implement the recommendations for practice and evaluate the students’ performance.

Aim/Purpose: The purpose of this paper is to develop and evaluate a debiasing-based approach to assessing the learning materials in problem-based learning (PBL) environments. Background: Research in cognitive debiasing suggests nine debiasing strategies improve decision-making. Given the large number of decisions made in semester-long, problem-based learning projects, multiple tools and techniques help students make decisions. However, instructors may struggle to identify the specific tools or techniques that could be modified to best improve students’ decision-making in the project. Furthermore, a structured approach for identifying these modifications is lacking. Such an approach would match the debiasing strategies with the tools and techniques. Methodology: This debiasing framework for the PBL environment is developed through a study of debiasing literature and applied within an e-commerce course using the Model for Improvement, continuous improvement process, as an illustrative case to show its potential. In addition, a survey of the students, archival information, and participant observation provided feedback on the debiasing framework and its ability to assess the tools and techniques within the PBL environment. Contribution: This paper demonstrates how debiasing theory can be used within a continuous improvement process for PBL courses. By focusing on a cognitive debiasing-based approach, this debiasing framework helps instructors 1) identify what tools and techniques to change in an PBL environment, and 2) assess which tools and techniques failed to debias the students adequately, providing potential changes for future cycles. Findings: Using the debiasing framework in an e-commerce course with significant PBL elements provides evidence that this framework can be used within IS courses and more broadly. In this particular case, the change identified in a prior cycle proved effective and additional issues were identified for improvement. Recommendations for Practitioners: With the growing usage of semester-long PBL projects in business schools, instructors need to ensure that their design of the projects incorporates techniques that improve student learning and decision making. This approach provides a means for assessing the quality of that design. Recommendation for Researchers: This study uses debiasing theory to improve course techniques. Researchers interested in assessment, course improvement, and program improvement should incorporate debiasing theory within PBL environments or other types of decision-making scenarios. Impact on Society: Increased awareness of cognitive biases can help instructors, students, and professionals make better decisions and recommendations. By developing a framework for evaluating cognitive debiasing strategies, we help instructors improve projects that prepare students for complex and multifaceted real-world projects. Future Research: The approach could be applied to multiple contexts, within other courses, and more widely within information systems to extend this research. The framework might also be refined to make it more concise, integrated with assessment, or usable in more contexts.

Aim/Purpose: The purpose of this research is to determine whether ESL teaching videos as a form of asynchronous online knowledge sharing can act as an aid to ESL learners internalizing knowledge in language acquisition. In this context, internalizing knowledge carries the meaning of being able to remember language, and purposefully and accurately use it context, including appropriacy of language, and aspects of correct pronunciation, intonation, stress patterns and connected speech, these being the elements of teaching and practice that are very often lacking in asynchronous, online, instructional video. Background: Knowledge Management is the field of study, and the practice, of discovering, capturing, sharing, and applying knowledge, typically with a view to translating individuals’ knowledge into organizational knowledge. In the field of education, it is the sharing of instructors’ knowledge for students to be able to learn and usefully apply that knowledge. In recent pandemic times, however, the mode of instruction has, of necessity, transitioned from face-to-face learning to an online environment, transforming the face of education as we know it. While this mode of instruction and knowledge sharing has many advantages for the online learner, in both synchronous and asynchronous learning environments, it presents certain challenges for language learners due to the absence of interaction and corrective feedback that needs to take place for learners of English as a Second Language (ESL) to master language acquisition. Unlike other subjects where the learner has recourse to online resources to reinforce learning through referencing external information, such as facts, figures, or theories, to be successful in learning a second language, the ESL learner needs to be able to learn to process thought and speech in that language; essentially, they need to learn to think in another language, which takes time and practice. Methodology: The research employs a systematic literature review (SLR) to determine the scope and extent to which the subject is covered by existing research in this field, and the findings thereof. Contribution: Whilst inconclusive in relation to internalizing language through online, asynchronous instructional video, through its exploratory nature, the research contributes towards the body of knowledge in online learning through the drawing together of various studies in the field of learning through asynchronous video through improving video and instructional quality. Findings: The findings of the systematic literature review revealed that there is negligible research in this area, and while information exists on blended and flipped modes of online learning, and ways to improve the quality and delivery of instructional video generally, no prior research on the exclusive use of asynchronous videos as an aid to internalizing English as a second language were found. Recommendations for Practitioners: From this research, it is apparent that there is considerably more that practitioners can do to improve the quality of instructional videos that can help students engage with the learning, from which students stand a much better chance of internalizing the learning. Recommendation for Researchers: For researchers, the absence of existing research is an exciting opportunity to further explore this field. Impact on Society: Online learning is now globally endemic, but it poses specific challenges in the field of second language learning, so the development of instructional videos that can facilitate this represents a clear benefit to all ESL learners in society as a whole. Future Research: Clearly the absence of existing research into whether online asynchronous instructional videos can act as an aid to internalizing the acquisition of English as a second language would indicate that this very specific field is one that merits future research. Indeed, it is one that the author intends to exploit through primary data collection from the production of a series of asynchronous, online, instructional videos.

Aim/Purpose: The goal of the study was to examine the perceptions of senior academic staff who also serve as policymakers in Israeli colleges of education, regarding the integration of technology in teacher education, and the shift to online learning during the Covid-19 pandemic. There is little research on this issue and consequently, the aim of the present study is to fill this lacuna. Background: In Israel, senior academic staff in colleges of education play a particularly important role in formulating institutional policies and vision regarding the training of preservice teachers. They fulfil administrative functions, teach, and engage in research as part of their academic position. During the Covid-19, they led the shift to online learning. However, there is little research on their perceptions of technology integration in teacher education in general, and during the Covid-19, in particular. Methodology: This qualitative study conducted semi-structured interviews with 25 senior academic staff from 13 academic colleges of education in Israel. Contribution: The study has practical implications for the implementation of technology in teacher education, suggesting the importance of establishing open discourse and collaboration between college stakeholders to enable enactment of a vision for equity-that allows programs to move swiftly from crisis-management to innovation and transformation during the Covid-19 pandemic. Findings: The findings obtained from content analysis of the interviews reveals a central concept: “On both sides of the divide”, and points of intersection in the perceptions of the senior academic staff. The central concept encompassed three themes: (1) centralization - between top-down and bottom-up policies, (2) between innovation and conservation, and (3) between crisis and growth. The findings indicate that in times of crisis, the polarity surrounding issues essential to the organisation’s operation is reduced, and a blend is formed to create a new reality in which the various dichotomies merge. Recommendations for Practitioners: The study has practical implications for the scope of discussions on the implementation of technology in teacher education (formulating a vision and policies, and their translation into practice), suggesting that such discussions should consider the perceptions of policymakers. Recommendation for Researchers: The findings reflect the challenges faced by senior academic staff at colleges of education that reflect the ongoing attempts to negotiate and reconcile different concerns. Impact on Society: The findings have implications for colleges of education that are responsible for pre-service teachers' teaching practices. Future Research: An enacted vision for equity-based educator preparation that allows programs to move swiftly from crisis-management to innovation and transformation. Future research might reveal a more complete picture by investigating a broader spectrum of stakeholders both in Israel and elsewhere. Hence, future research should examine the power relations between senior college staff and external bodies such as the Higher Education Council (which determines higher education policies in Israel).

Aim/Purpose: The complexity of today’s organizational databases highlights the importance of hard technical skills as well as soft skills including teamwork, communication, and problem-solving. Therefore, when teaching students about databases it follows that using a team approach would be useful. Background: Team-based learning (TBL) has been developed and tested as an instructional strategy that leverages learning in small groups in order to achieve increased overall effectiveness. This research studies the impact of utilizing team-based learning strategies in an undergraduate Database Management course in order to determine if the methodology is effective for student learning related to database technology concepts in addition to student preparation for working in database teams. Methodology: In this study, a team-based learning strategy is implemented in an undergraduate Database Management course over the course of two semesters. Students were assessed both individually and in teams in order to see if students were able to effectively learn and apply course concepts on their own and in collaboration with their team. Quantitative and qualitative data was collected and analyzed in order to determine if the team approach improved learning effectiveness and allowed for soft skills development. The results from this study are compared to previous semesters when team-based learning was not adopted. Additionally, student perceptions and feedback are captured. Contribution: This research contributes to the literature on database education and team-based learning and presents a team-based learning process for faculty looking to adopt this methodology in their database courses. This research contributes by showing how the collaborative assessment aspect of team-based learning can provide a solution for the conceptual and collaborative needs of database education. Findings: Findings related to student learning and perceptions are presented illustrating that team-based learning can lead to improvements in performance and provides a solution for the conceptual and collaborative needs of database education. Specifically, the findings do show that team scores were significantly higher than individual scores when completing class assessments. Student perceptions of both their team members and the team-based learning process were overall positive with a notable difference related to the perception of team preparedness based on gender. Recommendations for Practitioners: Educational implications highlight the challenges of team-based learning for assessment (e.g., gender differences in perceptions of team preparedness), as well as the benefits (e.g., development of soft skills including teamwork and communication). Recommendation for Researchers: This study provides research implications supporting the study of team assessment techniques for learning and engagement in the context of database education. Impact on Society: Faculty looking to develop student skills in relation to database concepts and application as well as in relation to teamwork and communication may find value in this approach, ultimately benefiting students, employers, and society. Future Research: Future research may examine the methodology from this study in different contexts as well as explore different strategies for group assignments, room layout, and the impact of an online environment.

Aim/Purpose: This study seeks to present a learning model of discrete mathematics elements, elucidate the content of teaching, and validate the effectiveness of this learning in a digital education context. Background: Teaching discrete mathematics in the realm of digital education poses challenges, particularly in crafting the optimal model, content, tools, and methods tailored for aspiring computer science teachers. The study draws from both a comprehensive review of relevant literature and the synthesis of the authors’ pedagogical experiences. Methodology: The research utilized a system-activity approach and aligned with the State Educational Standard. It further integrated the theory of continuous education as its psychological and pedagogical foundation. Contribution: A unique model for instructing discrete mathematics elements to future computer science educators has been proposed. This model is underpinned by informative, technological, and personal competencies, intertwined with the mathematical bedrock of computer science. Findings: The study revealed the importance of holistic teaching of discrete mathematics elements for computer science teacher aspirants in line with the Informatics educational programs. An elective course, “Elements of Discrete Mathematics in Computer Science”, comprising three modules, was outlined. Practical examples spotlighting elements of mathematical logic and graph theory of discrete mathematics in programming and computer science were showcased. Recommendations for Practitioners: Future computer science educators should deeply integrate discrete mathematics elements in their teaching methodologies, especially when aligning with professional disciplines of the Informatics educational program. Recommendation for Researchers: Further exploration is recommended on the seamless integration of discrete mathematics elements in diverse computer science curricula, optimizing for varied learning outcomes and student profiles. Impact on Society: Enhancing the quality of teaching discrete mathematics to future computer science teachers can lead to better-educated professionals, driving advancements in the tech industry and contributing to societal progress. Future Research: There is scope to explore the wider applications of the discrete mathematics elements model in varied computer science sub-disciplines, and its adaptability across different educational frameworks.

Aim/Purpose: The study aims to supplement existing knowledge of information systems by presenting empirical data on the factors influencing the intentions of doctoral students to learn through online platforms. Background: E-learning platforms have become popular among students and professionals over the past decade. However, the intentions of the doctoral students are not yet known. They are an important source of knowledge production in academics by way of teaching and research. Methodology: The researchers collected data from universities in the Delhi National Capital Region (NCR) using a survey method from doctoral students using a convenience sampling method. The model studied was the Technology Readiness and Acceptance Model (TRAM), an integration of the Technology Readiness Index (TRI) and Technology Acceptance Model (TAM). Contribution: TRAM provides empirical evidence that it positively predicts behavioral intentions to learn from online platforms. Hence, the study validated the model among doctoral students from the perspective of a developing nation. Findings: The model variables predicted 49% of the variance in doctoral students’ intent. The TRAM model identified motivating constructs such as optimism and innovativeness as influencing TAM predictors. Finally, doctoral students have positive opinions about the usefulness and ease of use of online learning platforms. Recommendations for Practitioners: Academic leaders motivate scholars to use online platforms, and application developers to incorporate features that facilitate ease of use. Recommendation for Researchers: Researchers can explore the applicability of TRAM in other developing countries and examine the role of cultural and social factors in the intent to adopt online learning. Future Research: The influence of demographic variables on intentions can lead to additional insights.

Aim/Purpose: This study examines the use of the Emergency Remote Teaching (ERT) platform by undergraduates of the University of Ibadan, Nigeria, during the COVID-19 pandemic using the constructs of the UTAUT2 model. Five constructs of the UTAUT2 model were adopted to investigate the use of the ERT platform by undergraduates of the university. Background: The Coronavirus (COVID-19) outbreak disrupted academic activities in educational institutions, leading to an unprecedented school closure globally. In response to the pandemic, higher educational institutions adopted different initiatives aimed at ensuring the uninterrupted flow of their teaching and learning activities. However, there is little research on the use of ERT platforms by undergraduates in Nigerian universities. Methodology: The descriptive survey research design was adopted for the study. The multi-stage random sampling technique was used to select 334 undergraduates at the University of Ibadan, Nigeria, while a questionnaire was used to collect data from 271 students. Quantitative data were collected and analyzed using frequency counts, percentages, mean and standard deviation, Pearson Product Moment Correlation, and regression analysis. Contribution: The study contributes to understanding ERT use in the educational institutions of Nigeria – Africa’s most populous country. Furthermore, the study adds to the existing body of knowledge on how the UTAUT2 Model could explain the use of information technologies in different settings. Findings: Findings revealed that there was a positive significant relationship between habit, hedonic motivation, price value, and social influence on the use of ERT platforms by undergraduates. Hedonic motivation strongly predicted the use of ERT platforms by most undergraduates. Recommendations for Practitioners: As a provisional intervention in times of emergencies, the user interface, navigation, customization, and other aesthetic features of ERT platforms should be more appealing and enjoyable to ensure their optimum utilization by students. Recommendation for Researchers: More qualitative research is required on users’ satisfaction, concerns, and support systems for ERT platforms in educational institutions. Future studies could consider the use of ERT by students in different countries and contexts such as students participating in English as a Foreign Language (EFL) and the English for Speakers of other languages (ESOL) programs. Impact on Society: As society faces increased uncertainties of the next global pandemic, this article reiterates the crucial roles of information technology in enriching teaching and learning activities in educational institutions. Future Research: Future research should focus on how different technology theories and models could explain the use of ERT platforms at different educational institutions in other geographical settings and contexts.

Aim/Purpose: The study focused on learner sentiments and experiences after using the Moodle assessment module and trained a machine learning classifier for future sentiment predictions. Background: Learner assessment is one of the standard methods instructors use to measure students’ performance and ascertain successful teaching objectives. In pedagogical design, assessment planning is vital in lesson content planning to the extent that curriculum designers and instructors primarily think like assessors. Assessment aids students in redefining their understanding of a subject and serves as the basis for more profound research in that particular subject. Positive results from an evaluation also motivate learners and provide employment directions to the students. Assessment results guide not just the students but also the instructor. Methodology: A modified methodology was used for carrying out the study. The revised methodology is divided into two major parts: the text-processing phase and the classification model phase. The text-processing phase consists of stages including cleaning, tokenization, and stop words removal, while the classification model phase consists of dataset training using a sentiment analyser, a polarity classification model and a prediction validation model. The text-processing phase of the referenced methodology did not utilise tokenization and stop words. In addition, the classification model did not include a sentiment analyser. Contribution: The reviewed literature reveals two major omissions: sentiment responses on using the Moodle for online assessment, particularly in developing countries with unstable internet connectivity, have not been investigated, and variations of the k-fold cross-validation technique in detecting overfitting and developing a reliable classifier have been largely neglected. In this study we built a Sentiment Analyser for Learner Emotion Management using the Moodle for assessment with data collected from a Ghanaian tertiary institution and developed a classification model for future sentiment predictions by evaluating the 10-fold and the 5-fold techniques on prediction accuracy. Findings: After training and testing, the RF algorithm emerged as the best classifier using the 5-fold cross-validation technique with an accuracy of 64.9%. Recommendations for Practitioners: Instead of a closed-ended questionnaire for learner feedback assessment, the open-ended mechanism should be utilised since learners can freely express their emotions devoid of restrictions. Recommendation for Researchers: Feature selection for sentiment analysis does not always improve the overall accuracy for the classification model. The traditional machine learning algorithms should always be compared to either the ensemble or the deep learning algorithms Impact on Society: Understanding learners’ emotions without restriction is important in the educational process. The pedagogical implementation of lessons and assessment should focus on machine learning integration Future Research: To compare ensemble and deep learning algorithms

Aim/Purpose: This article explores the critical need for adaptable educational models in times of crisis, focusing on strategies to overcome infrastructural and digital inequalities exacerbated by the COVID-19 pandemic. Background: By examining a case study of an offline digital library project implemented in South Sudan, this paper seeks to examine the impact of an offline digital educational solution for low-resource and crisis situations. Methodology: The authors utilize a mixed-methods approach, integrating both qualitative interviews and quantitative data analysis, to evaluate the use and impact of the SolarSPELL Initiative’s offline digital libraries in South Sudan. Contribution: This study contributes to our understanding of digital and information literacy within crisis contexts, highlighting the vital role of localized, offline content. Findings: The findings demonstrate that offline digital solutions can effectively mitigate educational disruptions by providing an accessible means to continue education during emergencies. Recommendations for Practitioners: Recommendations for practitioners include the adoption of robust offline digital learning solutions to promote educational continuity. Recommendation for Researchers: The authors recommend that researchers continue investigating the potential of offline digital educational solutions for low-resource and crisis situations. Impact on Society: Ultimately, this article finds that offline digital libraries, when paired with skill-building, are a viable means to lessen digital disparities and promote educational continuity in times of crisis and beyond. Future Research: The study suggests further exploration into the long-term impacts of such interventions on learning outcomes.

Aim/Purpose: The teaching of appropriate problem-solving techniques to novice learners in undergraduate software development education is often poorly defined when compared to the delivery of programming techniques. Given the global need for qualified designers of information technology, the purpose of this research is to produce a foundational template for an educational software development methodology grounded in the established literature. This template can be used by third-level educators and researchers to develop robust educational methodologies to cultivate structured problem solving and software development habits in their students while systematically teaching the intricacies of software creation. Background: While software development methodologies are a standard approach to structured and traceable problem solving in commercial software development, educational methodologies for inexperienced learners remain a neglected area of research due to their assumption of prior programming knowledge. This research aims to address this deficit by conducting an integrative review to produce a template for such a methodology. Methodology: An integrative review was conducted on the key components of Teaching Software Development Education, Problem Solving, Threshold Concepts, and Computational Thinking. Systematic reviews were conducted on Computational Thinking and Software Development Education by employing the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) process. Narrative reviews were conducted on Problem Solving and Threshold Concepts. Contribution: This research provides a comprehensive analysis of problem solving, software development education, computational thinking, and threshold concepts in computing in the context of undergraduate software development education. It also synthesizes review findings from these four areas and combines them to form a research-based foundational template methodology for use by educators and researchers interested in software development undergraduate education. Findings: This review identifies seven skills and four concepts required by novice learners. The skills include the ability to perform abstraction, data representation, decomposition, evaluation, mental modeling, pattern recognition, and writing algorithms. The concepts include state and sequential flow, non-sequential flow control, modularity, and object interaction. The teaching of these skills and concepts is combined into a spiral learning framework and is joined by four development stages to guide software problem solving: understanding the problem, breaking into tasks, designing, coding, testing, and integrating, and final evaluation and reflection. This produces the principal finding, which is a research-based foundational template for educational software development methodologies. Recommendations for Practitioners: Focusing introductory undergraduate computing courses on a programming syllabus without giving adequate support to problem solving may hinder students in their attainment of development skills. Therefore, providing a structured methodology is necessary as it equips students with essential problem-solving skills and ensures they develop good development practices from the start, which is crucial to ensuring undergraduate success in their studies and beyond. Recommendation for Researchers: The creation of educational software development methodologies with tool support is an under-researched area in undergraduate education. The template produced by this research can serve as a foundational conceptual model for researchers to create concrete tools to better support computing undergraduates. Impact on Society: Improving the educational value and experience of software development undergraduates is crucial for society once they graduate. They drive innovation and economic growth by creating new technologies, improving efficiency in various industries, and solving complex problems. Future Research: Future research should concentrate on using the template produced by this research to create a concrete educational methodology adapted to suit a specific programming paradigm, with an associated learning tool that can be used with first-year computing undergraduates.

Aim/Purpose: This study presents some activities that integrate computational thinking (CT) into mathematics lessons utilizing GeoGebra to promote constructionist learning. Background: CT activities in the Indonesian curriculum are dominated by worked examples with less plugged-mode activities that might hinder students from acquiring CT skills. Therefore, we developed mathematics and CT (math+CT) lessons to promote students’ constructionist key behaviors while learning. Methodology: The researchers utilized an educational design research (EDR) to guide the lesson’s development. The lesson featured 11 applets and 22 short questions developed in GeoGebra. To improve the lesson, it was sent to eight mathematics teachers and an expert in educational technology for feedback, and the lesson was improved accordingly. The improved lessons were then piloted with 17 students, during which the collaborating mathematics teachers taught the lessons. Data were collected through the students’ work on GeoGebra, screen recording when they approached the activities, and interviews. We used content analysis to analyze the qualitative data and presented descriptive statistics to quantitative data. Contribution: This study provided an example and insight into how CT can be enhanced in mathematics lessons in a constructionist manner. Findings: Students were active in learning mathematics and CT, especially when they were engaged in programming and debugging tasks. Recommendations for Practitioners: Educators are recommended to use familiar mathematics software such as GeoGebra to support students’ CT skills while learning mathematics. Additionally, our applets are better run on big-screen devices to optimize students’ CT programming and debugging skills. Moreover, it is recommended that students work collaboratively to benefit from peer feedback and discussion. Recommendation for Researchers: Collaboration with teachers will help researchers better understand the situation in the classroom and how the students will respond to the activities. Additionally, it is important to provide more time for students to get familiar with GeoGebra and start with fewer errors to debug. Future Research: Further research can explore more mathematics topics when integrating CT utilizing GeoGebra or other mathematics software or implement the lessons with a larger classroom size to provide a more generalizable result and deeper understanding.

Aim/Purpose: Despite playing a critical role in shaping the future, 70% of undergraduate engineers report low levels of motivation. Student disengagement and a lack of ownership of their learning are significant challenges in higher education, specifically engineering students in the computer science department. This study investigates the various causes of these problems among first-year undergraduate engineers. Background: Student disengagement has become a significant problem, especially in higher education, leading to reduced academic performance, lower graduation rates, and less satisfaction with learning. The study intends to develop approaches that encourage a more interesting and learner-motivated educational environment. Methodology: This research uses a mixed methods approach by combining quantitative data from a survey-based questionnaire with qualitative insights from focus groups to explore intrinsic and extrinsic motivators, instructional practices, and student perceptions of relevance and application of course content. The aim of this method is to make an all-inclusive exploration into undergraduate engineering students’ perspectives on factors contributing to this disengagement and the need for more ownership. Contribution: Inculcating passion for engineering among learners seems demanding, with numerous educational programs struggling with issues such as a lack of interest by students and no personal investment in learning. Understanding the causes is of paramount importance. The study gives suggestions to help teachers or institutions create a more engaged and ownership-based learning environment for engineering students. Findings: The findings revealed a tangled web influencing monotonous teaching styles, limited opportunities and applications, and a perceived gap between theoretical knowledge and real-world engineering problems. It emphasized the need to implement more active learning strategies that could increase autonomy and a stronger sense of purpose in their learning journey. It also highlights the potential use of technology in promoting student engagement and ownership. Further research is needed to explore optimal implementation strategies for online simulations, interactive learning platforms, and gamification elements in the engineering curriculum. Recommendations for Practitioners: It highlights the complex interplay of intrinsic and extrinsic motivation factors and the need to re-look at instructional practice and emphasize faculty training to develop a more student-centered approach. It also stresses the need to look into the relevance and application of the course content. Recommendation for Researchers: More work needs to be done with a larger, more diverse sample population across multiple institutions and varied sociocultural and economic backgrounds. Impact on Society: Enhancing learners’ educational experience can result in creating a passionate and competent team of engineers who can face future obstacles fearlessly and reduce the production of half-baked graduates unprepared for the profession’s challenges. Future Research: Conduct long-term studies to assess the impact of active learning and technology use on student outcomes and career readiness. Investigate scaling up successful strategies across diverse engineering programs. See if promising practices work well everywhere.

Aim/Purpose: This review’s main objective was to examine the existing literature on the use of 3D printers in primary education, covering students aged six to twelve across general, special, and inclusive educational environments. Background: A review of the literature indicated a significant oversight – prior reviews insufficiently distinguish the application of 3D printing in primary education from its utilization at higher educational tiers or focused on particular subject areas and learning domains. Considering the distinct nature and critical role of primary education in developing young students’ cognitive abilities and skills, it is essential to concentrate on this specific educational stage. Methodology: The scoping review was selected as the preferred research method. The methodological robustness was augmented through the utilization of the backward snowballing technique. Consequently, a total of 50 papers were identified and subjected to thorough analysis. Contribution: This review has methodically compiled and analyzed the literature on 3D printing use among elementary students, offering a substantial addition to academic conversations. It consolidated and organized research on 3D printers’ educational uses, applying robust and credible criteria. Findings: Many studies featured small sample sizes and limited research on inclusive and special education. The analysis revealed 82 distinct research goals and 13 educational fields, with STEM being the predominant focus. Scholars showed considerable interest in how 3D printers influence skills like creativity and problem-solving, as well as emotions such as engagement and motivation. The majority of studies indicated positive outcomes, enhancing academic achievement, engagement, collaboration, creativity, interest, and motivation. Nonetheless, challenges were noted, highlighting the necessity for teacher training, the expense of equipment, technical difficulties, and the complexities of blending new methods with traditional curricula. Recommendations for Practitioners: To capitalize on the benefits that 3D printers bring, curriculum planners are urged to weave them into their programs, ensuring alignment with educational standards and skill development. The critical role educators play in the effective implementation of this technology necessitates targeted professional development programs to equip them with the expertise for successful integration. Moreover, 3D printing presents a unique opportunity to advance inclusive education for students with disabilities, offering tailored learning experiences and aiding in creating assistive technologies. In recognizing the disparities in access to 3D printing, educational leaders must address the financial and logistical barriers highlighted in the literature. Strategic initiatives are essential to democratize 3D printing access, ensuring all students benefit from this educational tool. Recommendation for Researchers: Comparative studies are critical to elucidate the specific advantages and limitations of 3D printing technology due to the scarcity of research contrasting it with other tools. The variability in reporting durations of interventions and research environments underscores the necessity for uniform methodologies and benchmarks. Because research has predominantly focused on STEM/STEAM education, expanding into different educational areas could provide a comprehensive understanding of 3D printing’s capabilities. The existence of neutral and negative findings signals an opportunity for further investigation. Exploring the factors that impede the successful integration of 3D printing will inform the creation of superior pedagogical approaches and technological refinements. Future Research: As the review confirmed the significant promise of 3D printing technology in enriching education, especially in the context of primary education, the imperative for continued research to refine its application in primary education settings is highlighted.

Aim/Purpose: This study explores the subject structure, social networks, research trends, and issues in the domain that have the potential to derive an overview of the development of virtual reality-based learning media in vocational education. Background: Notwithstanding the increasingly growing interest in the application of virtual reality in vocational learning, the existing research literature may still leave out some issues necessary for a comprehensive understanding. This study will point out such areas that need more exploration and a more comprehensive synthesis of the literature by conducting a bibliometric analysis. It will be interesting to keep track of the changing concepts and methodologies applied in the development of VR-based learning media in vocational education research. Methodology: This review was carried out using bibliometric methodology, which can highlight patterns of publication and research activity in this hitherto little studied area. The results of the study have the potential to lead to evidence-based priority in VR development, which will tailor work for vocational contexts and set the compass against the growing worldwide interest in this area. The study provides a descriptive analysis of publications, citations, and keyword data for 100 documents published between the years 2013 and 2022 from the Scopus database, which is conducted to illustrate the trends in the field. Contribution: This study also counts as a contribution to understanding the research hotspots of VR-based learning media in vocational education. Through bibliometric analysis, this study thoroughly summarized the relevant research and literature laying a knowledge foundation for researchers and policy makers. Additionally, this analysis identified knowledge gaps, recent trends, and directions for future research. Findings: The bibliometric analysis revealed the following key findings: 1. A growing publication trajectory, with output increasing from 7 articles in 2013 to 25 articles in 2022. 2. The United States led the contributions, followed by China, and Germany. 3. The most prominent authors are affiliated with American medical institutions. 4. Lecture proceedings include familiar sources that reflect this nascent domain. 5. Citation analysis identified highly influential work and researchers. 6. Keyword analysis exposed technology-oriented topics rather than learning-oriented terms. These findings present an emerging landscape with opportunities to address geographic and pedagogical research gaps. Recommendations for Practitioners: This study will be beneficial for designers and developers of VR-based learning programs because it aligns with the most discussed and influential VR technologies within the literature. Such an alignment of an approach with relevant research trends and focus can indeed be very useful for the effective application and use of VR-based learning media for quality improvements in vocational students' learning. Recommendation for Researchers: In fact, in this bibliometric review of VR integration within vocational classrooms, a future call for focused research is presented, especially on teaching methods, course design, and learning impact. This is a framework that seeks to establish its full potential with effective and integrated use of VR in the various vocational curricula and settings of learners. Impact on Society: From the findings of the bibliometric analysis, it is evident that virtual reality technologies (VR) have significantly led to transformation within educational media. There is no denying that the growing interest and investment in the integration of virtual reality into vocational education has been well manifested in the substantive increase in publications in the last decade. This shows what the innovation driving factor is in the United States. At the same time the rapid contributions from China signal worldwide recognition of the potential of VR to improve technical skills training. This study points the way for more research to bridge critical gaps, specifically how VR tools can be used in vocational high school classrooms. Furthermore, research should be aligned to meet specific needs of vocational learners and even promote international cross-border partnerships, pointing out the potential of virtual reality to be a universally beneficial tool in vocational education. The examination of highly cited articles provides evidence of the potential of VR to be an impactful pedagogical tool in vocational education. The findings suggest that researchers need to move forward looking at the trajectory of VR in vocational education and how promising it is in defining the future for innovative and effective learning methodologies. Future Research: This study is an exceptionally valuable contribution, a true landmark in the field of dynamic development, and one that denotes very meaningful implications for the future course of research in the dynamically developing field of bibliometric analysis of VR-based learning media for vocational education. The increase in the number of publications emanates from growing interests in the application of virtual reality (VR) technologies in vocational education. The high concentration of authorship from the USA, along with the ever increasing contributions from China, spotlights the increasing worldwide recognition of the impact of immersive technologies in the enhancement of training in technical skills. These are emerging trends that call for research to exemplify the diverse views and global teamwork opportunities presented by VR technologies. The study also highlights critical areas that need focused attention in future research endeavors. The fact that the embedding of VR tools into classrooms in vocational high schools has been poorly researched points to the major gap in pedagogical research within authentic educational settings. Therefore, further investigations should evaluate teaching methods in VR, lesson designs, and the impacts of VR in specific vocational trades. This supports the need for learner-centered frameworks that are tailor-made to the needs of vocational learners. This calls for more direct and focused investigations into identified research gaps noting a growing dominance in the field of health-related research with the most cited articles in this field, to integrate virtual reality into additional vocational education contexts. In this way, the gaps present an opportunity for researchers to make significant contributions to the development of interventions responsive to the unique needs of vocational learners; this will contribute to strengthening the evidence base for the worldwide implementation of VR within vocational education systems. This was recommended as the intention of such a bibliometric analysis: supporting the potential of VR as a pedagogical tool in vocational contexts and providing grounding for a strong and focused future research agenda within this burgeoning area of educational technology.

Aim/Purpose: The digital ecosystem has contributed to the acceleration of digital and mobile educational tools across institutions worldwide. The research displays educators’ perspectives on web applications on mobile devices that can be used to engage and challenge students while impacting their learning. Background: Explored are elements of technology in education and challenges and successes reported by instructors to shift learning from static to dynamic. Methodology: Insights for this study were gained through questionnaires and focus groups with university educators in the United Arab Emirates. Key questions addressed are (1) challenges/benefits, (2) types of mobile technology applications used by educators, and (3) strategies educators use to support student learning through apps. The research is assisted by focus groups and a sample of 42 completed questionnaires. Contribution: The work contributes to web/mobile strategic considerations in the classroom that can support student learning and outcomes. Findings: The results reported showcase apps that were successfully implemented in classrooms and provide a perspective for today’s learning environment that could be useful for instructors, course developers, or any educational institutions. Recommendations for Practitioners: Academics can integrate suggested tools and explore engagement and positive associations with tools and technologies. Recommendation for Researchers: Researchers can consider new learning applications, mobile devices, course design, learning strategies, and student engagement practices for future studies. Impact on Society: Digitization and global trends are changing how educators teach, and students learn; therefore, gaps need to be continually filled to keep up with the pace of ever-evolving digital technologies that can engage student learning. Future Research: Future research may focus on interactive approaches toward mobile devices in higher education learning and shorter learning activities to engage students.

Aim/Purpose: This mixed-methods study aims to examine factors influencing academicians’ intentions to continue using AI-based chatbots by integrating the Task-Technology Fit (TTF) model and social network characteristics. Background: AI-powered chatbots are gaining popularity across industries, including academia. However, empirical research on academicians’ adoption behavior is limited. This study proposes an integrated model incorporating TTF factors and social network characteristics like density, homophily, and connectedness to understand academics’ continuance intentions. Methodology: A qualitative study involving 31 interviews of academics from India examined attitudes and the potential role of social network characteristics like density, homophily, and connectedness in adoption. Results showed positive sentiment towards chatbots and themes on how peer groups accelerate diffusion. In the second phase, a survey of 448 faculty members from prominent Indian universities was conducted to test the proposed research model. Contribution: The study proposes and validates an integrated model of TTF and social network factors that influence academics’ continued usage intentions toward AI chatbots. It highlights the nuanced role of peer networks in shaping adoption. Findings: Task and technology characteristics positively affected academics’ intentions to continue AI chatbot usage. Among network factors, density showed the strongest effect on TTF and perceived usefulness, while homophily and connectedness had partial effects. The study provides insights into designing appropriate AI tools for the academic context. Recommendations for Practitioners: AI chatbot designers should focus on aligning features to academics’ task needs and preferences. Compatibility with academic work culture is critical. Given peer network influences, training and demonstrations to user groups can enhance adoption. Platforms should have capabilities for collaborative use. Targeted messaging customized to disciplines can resonate better with academic subgroups. Multidisciplinary influencers should be engaged. Concerns like plagiarism risks, privacy, and job impacts should be transparently addressed. Recommendation for Researchers: More studies are needed across academic subfields to understand nuanced requirements and barriers. Further studies are recommended to investigate differences across disciplines and demographics, relative effects of specific network factors like size, proximity, and frequency of interaction, the role of academic leadership and institutional policies in enabling chatbot adoption, and how AI training biases impact usefulness perceptions and ethical issues. Impact on Society: Increased productivity in academia through the appropriate and ethical use of AI can enhance quality, access, and equity in education. AI can assist in mundane tasks, freeing academics’ time for higher-order objectives like critical thinking development. Responsible AI design and policies considering socio-cultural aspects will benefit sustainable growth. With careful implementation, it can make positive impacts on student engagement, learning support, and research efficiency. Future Research: Conduct longitudinal studies to examine the long-term impacts of AI chatbot usage in academia. Track usage behaviors over time as familiarity develops. Investigate differences across academic disciplines and roles. Requirements may vary for humanities versus STEM faculty or undergraduate versus graduate students. Assess user trust in AI and how it evolves with repeated usage, and examine trust-building strategies. Develop frameworks to assess pedagogical effectiveness and ethical risks of conversational agents in academic contexts.

In today's world, malware has become a part and threat to our computer systems. All electronic devices are very susceptible/vulnerable to various threats like different types of malware. There is one subset of malware called ransomware, which is majorly used to have large financial gains. The attacker asks for a ransom amount to regain access to the system/data. When dynamic technique using machine learning is used, it is very important to select the correct set of features for the detection of a ransomware attack. In this paper, we present two novel algorithms for the detection of ransomware attacks. The first algorithm is used to assign the time stamp to the features (API calls) for the ordering and second is used for the ordering and ranking of the features for the early detection of a ransomware attack.

This research introduces a hybrid honeypot architecture to bolster security within software-defined networks (SDNs). By combining low-interaction and high-interaction honeypots, the proposed solution effectively identifies and mitigates cyber threats, including port scanning and man-in-the-middle attacks. The architecture is structured into multiple modules that focus on detecting open ports using Vilhala honeypots and simulating targeted and random attack scenarios. This hybrid approach enables comprehensive monitoring and detailed packet-level analysis, providing enhanced protection against advanced online threats. The study also conducts a comparative analysis of different attack detection methods using tools like KFSensor and networking shell commands. The results highlight the hybrid honeypot system's efficacy in filtering malicious traffic and detecting security breaches, making it a robust solution for safeguarding SDNs.

This study focuses on the importance of monitoring student attendance in education and the challenges faced by educators in doing so. Existing methods for attendance tracking have drawbacks, including high costs, long processing times, and inaccuracies, while security and privacy concerns have often been overlooked. To address these issues, the authors present a novel internet of things (IoT)-based self-lecture attendance system (SLAS) that leverages smartphones and QR codes. This system effectively addresses security and privacy concerns while providing streamlined attendance tracking. It offers several advantages such as compact size, affordability, scalability, and flexible features for teachers and students. Empirical research conducted in a live lecture setting demonstrates the efficacy and precision of the SLAS system. The authors believe that their system will be valuable for educational institutions aiming to streamline attendance tracking while ensuring security and privacy.

Badminton, as a fast and highly technical sport, requires high accuracy in identifying athletes' swing movements. Accurately identifying different swing movements is of great significance for technical analysis, coach guidance, and game evaluation. To improve the recognition accuracy of badminton players' swing movements, this text is based on an improved dense trajectory algorithm to improve the accuracy of recognising badminton players' swing movements. The features are efficiently extracted and encoded. The results on the KTH, UCF Sports, and Hollywood2 datasets demonstrated that the improved algorithm achieved recognition accuracy of 94.2%, 88.2%, and 58.3%, respectively. Compared to traditional methods, the innovation of research lies in optimised feature extraction methods, efficient algorithm design, and accurate action recognition. These results provide new ideas for the research and application of badminton swing motion recognition.

This study examines the relationships between ICTs (e.g., chatbots, virtual assistants, social media platforms, e-mail marketing, mobile marketing, data analytics, interactive voice response, big data analytics, push notifications, cloud computing, and augmented reality) and e-customer relationship management (e-CRM) from the banking industry of China. Similarly, this study unfolds the moderation interference of trust and risk between the association of ICTs and e-CRM, respectively. The study provided a positive nexus between ICTs and e-CRM. On the other side, a significant moderation of trust, as well as financial risk was observed between the correlation of ICTs and customer relationship management. This study endows with insights into ICTs which are critical for achieving e-CRM by streamlining interactions and enhancing their experience. Similarly, trust and financial risk were observed as potential forces that sway the association between ICTs and e-CRM.

The world is transitioning towards the digitalisation of everyday tasks significantly. The impact of digital literacy on technological usage is immense. The awareness and utilisation of the digital India schemes are needed to determine unorganised retailers' overall satisfaction with digitalisation and technological usage. The chief motive of this research is to assess and analyse digital literacy in terms of technology usage and the awareness cum utilisation level of the various digital India schemes proposed by the Government of India for unorganised retailers. The conceptual framework consists of the factors such as digital literacy and digital India schemes that determine the overall satisfaction of retailers with technology usage. The corresponding results of the study synthesised the impact of digital literacy, digital India schemes, and the awareness cum utilisation level of technology among unorganised retailers based on recommendations to enhance the performance of the unorganised retail sector.

Numerous scandals due to unethical decisions occur despite the growing use of decision support systems (DSS). Several scholars recommend incorporating ethical attributes along with business requirements in DSS design. However, little guidance exists to indicate which ethical attributes to include and the importance ethical attributes should be given in comparison to business requirements. This study addresses this deficiency by identifying ethical requirements to integrate in DSS design drawn from the business ethics literature. This study conducted a large-scale empirical survey with information technology decision-makers to examine the relative importance of DSS fit with ethical and business requirements as well as the appropriate balance of those requirements on perceived DSS performance. The results show that decision makers perceive better DSS performance when the ethical and business requirements align with its organisation's beliefs than from ethical or business requirements alone.

In several manufacturing firms, inventory constitutes most of the current assets, and this underscores the importance of inventory management as a fundamental issue for the majority of the firms irrespective of their sizes. Therefore, the purpose of this research is to assess the factors that influence the effectiveness of inventory management of Malaysian SMEs in the manufacturing sector. The study employs PLS-SEM technique to test the hypotheses. The main findings show that documentation and records, inventory control system and qualified personnel have positive effects on effective inventory management of Malaysian SMEs in the manufacturing sector. The study also reveals that effective inventory management has a mediating effect on the relationship between documentation and records, inventory control system, qualified personnel and organisational performance. Therefore, the study recommends that Malaysian SMEs in the manufacturing sector should improve their approaches to embracing effective inventory management practices in order to enhance organisational performance.

This research investigates the correlation between risk management and supply chain performance (SCP) along with moderation of AI-embedded technologies such as big data analytics, Internet of Things (IoT), virtual reality, and blockchain technologies. To calculate the results, this study utilised 644 questionnaires through the structural equation modelling (SEM) method. It is revealed using SmartPls that financial risk management (FRM) is positively linked with SCP. Second, it was observed that AI significantly moderates the connection between FRM and SCP. In addition, the study presents certain insights into supply chain and AI-enabled technologies and how these capabilities can beneficially advance SCP. Besides, certain implications, both managerial and theoretical are described for the supply chain managers along with limitations for future scholars of the world.

This study explores the connection between mentorship and sustainable development (SD) within three major perspectives of sustainable development, such as social, environmental, and economic perspectives from China. Second, the study revealed the relationship between entrepreneurship and SD. Third, a moderation influence of innovation management (IM) was observed among the proposed nexuses of mentorship, entrepreneurship, and SD. To this end, a total of 535 questionnaires were eventually utilised with the support of SmartPLS and the structure equation modelling (SEM) approach. A positive connection was confirmed between mentorship and SD. The outcome uncovered a positive correlation between entrepreneurship and SD. In addition, a moderation of IM was found between mentorship, entrepreneurship, and SD. The study enlists several interesting lines about mentorship, entrepreneurship, and IM that might help to improve SD in terms of social, environmental, and economic perspectives. Besides, the study provides various implications for management and states the weaknesses along with the future directions for worldly researchers.

Today, income management is one of the attractive and controversial issues in accounting investigation areas from both investigations and regulatory view. Managers do manage income either to distort information or to defer and report the information related to future incomes. This investigation aims at examining the effect of taxable income management on the information content of taxable income of firms. Tests of research hypotheses were performed with an empirical method based on econometric and using multivariate regression analysis, t-test, Wilcoxon total scores, and specifically by using the panel data model across 147 firms listed on the Tehran Stock Exchange between 2002 and 2011. Findings show that taxable income management reduces the information content of taxable income. In addition, firms manage accounting income to defer information.

With the rapid development of computer information technology, the work of accountants has gradually evolved into an electronic trend and the management of accounting files has also undergone great changes. Combining with the current development trend of informatisation, this paper discusses the electronic management mode of enterprise accounting files under the condition of informatisation. Combined with the latest information technology, an enterprise electronic accounting file system is established and the research and development system is compared with the traditional paper accounting file management. The results have shown that the retrieval and query time of traditional paper accounting files is close to 2 hours. After the implementation of the electronic accounting file system, the retrieval and query time of files can be completed in only 2 minutes, and the query efficiency of files has been increased by nearly 60 times.

With the rapid development of Artificial Intelligence (AI) technology, significant breakthroughs have been made in its application in many fields. Especially, in the field of enterprise human resource management and employee performance evaluation, AI has demonstrated its powerful ability to optimise and improve performance. This study explores the application of AI in enterprise human resource management and how to use AI to evaluate employee performance. The research includes analysing and comparing existing AI-driven human resource management models, evaluating how AI can help improve employee performance and leadership styles, and designing and developing human resource management computer systems for enterprise employees. Through empirical research and case analysis, this study proposes a new AI-optimised employee performance evaluation model and explores its application and effect in practice. In general, the application of AI can improve the efficiency and accuracy of enterprise human resource management, and provide new possibilities for employee performance evaluation. At present, artificial intelligence technology has been widely used in various fields of daily life, especially in corporate human resource management, providing better support for the development of enterprises.

Bright Lights has a history of success, but is at a pivotal point, facing the pains of strategic change. One salesperson has found a way to maintain sales and increase profit margin, but it requires operating between the lines of ethical boundaries. Ethics provides a choice between right and right as opposed to moral temptation of right and wrong (Kidder, 1996). As the case unfolds, Jim receives a mandate of which customers he can call on, reducing sales, profit margin, and customer satisfaction. A top performer, Jim finds a solution within company policy and the law, but although not hidden, is not entirely transparent. This creates two ethical decisions: 1) Should he be reprimanded or praised? 2) Should the company update policies to ban his actions, or promote his actions among other salespeople? This case clearly strikes the dilemma found in navigating the boundaries of a questionable business strategy.

In the perspective of institutional theory, business education is an institutional field, in which two major institutional forces are accreditations and rankings. In this context, French business schools (BS) have adopted an isomorphic response by starting to engage in research and publishing in academic journals. Studies have discussed their research as a new institutional trajectory. However, what remains unknown is how they differ from each other in such research dynamics. To bring new insights to the discussion, this quantitative study examines, over the period of 2008-2018, the evolution of research of French BS by systematically comparing the 'best' schools with other schools in all analyses. The results indicate a strong isomorphism in terms of publication quantity and productivity, scale of research collaboration and the internationalisation of research. However, these schools are heterogeneous in terms research quality and scale of international research collaboration, reflecting the diversity in their research strategy.