Using CSS 2.1 pseudo-elements to provide up to 3 background canvases, 2 fixed-size presentational images, and multiple complex borders for a single HTML element. This method of progressive enhancement works for all browsers that support CSS 2.1 pseudo-elements and their positioning. No CSS3 support required.

• Demo: Multiple Backgrounds with CSS 2.1
• Demo: Multiple Borders with CSS 2.1

Support: Firefox 3.5+, Safari 4+, Chrome 4+, Opera 10+, IE8+.

How does it work?

Essentially, you create pseudo-elements using CSS (:before and :after) and treat them similarly to how you would treat HTML elements nested within your target element. But they have distinct benefits – beyond semantics – over the use of nested HTML elements.

To provide multiple backgrounds and/or borders, the pseudo-elements are pushed behind the content layer and pinned to the desired points of the HTML element using absolute positioning.

The pseudo-elements contain no true content and are absolutely positioned. This means that they can be stretched to sit over any area of the “parent” element without affecting its content. This can be done using any combination of values for the top, right, bottom, left, width, and height properties and is the key to their flexibility.

What effects can be achieved?

Using just one element you can create parallax effects, multiple background colours, multiple background images, clipped background images, image replacement, expandable boxes using images for borders, fluid faux columns, images existing outside the box, the appearance of multiple borders, and other popular effects that usually require images and/or the use of presentational HTML. It is also possible to include 2 extra presentational images as generated content.

The Multiple Backgrounds with CSS 2.1 and Multiple Borders with CSS 2.1 demo pages show how several popular examples of these effects can be achieved with this technique.

Most structural elements will contain child elements. Therefore, more often than not, you will be able to gain a further 2 pseudo-elements to use in the presentation by generating them from the first child (and even last-child) element of the parent element. In addition, you can use style changes on :hover to produce complex interaction effects.

Example code: multiple background images

Using this technique it is possible to reproduce multiple-background parallax effects like those found on the Silverback site using just one HTML element.

The element gets its own background image and any desired padding. By relatively positioning the element it acts as the reference point when absolutely positioning the pseudo-elements. The positive z-index will allow for the correct z-axis positioning of the pseudo-elements.

#silverback {
  position: relative;
  z-index: 1;
  min-width: 200px;
  min-height: 200px;
  padding: 120px 200px 50px;
  background: #d3ff99 url(vines-back.png) -10% 0 repeat-x;
}

Both pseudo-elements are absolutely positioned and pinned to each side of the element. The z-index value of -1 moves the pseudo-elements behind the content layer. This way the pseudo-elements sit on top of the element’s background and border but all the content is still selectable or clickable.

#silverback:before,
#silverback:after {
  position: absolute;
  z-index: -1;
  top: 0;
  left: 0;
  right: 0;
  bottom: 0;
  padding-top: 100px;
}

Each pseudo-element then has a repeated background-image set. This is all that is needed to reproduce the parallax effect.

The content property lets you add an image as generated content. With two pseudo-elements you can add 2 further images to an element. They can be crudely positioned within the pseudo-element box by varying other properties such as text-align and padding.

#silverback:before {
  content: url(gorilla-1.png);
  padding-left: 3%;
  text-align: left;
  background: transparent url(vines-mid.png) 300% 0 repeat-x;
}

#silverback:after {
  content: url(gorilla-2.png);
  padding-right: 3%;
  text-align: right;
  background: transparent url(vines-front.png) 70% 0 repeat-x;
}

The finished product is part of the Multiple Backgrounds with CSS 2.1 demo.

Example code: fluid faux columns

Another application is creating equal height fluid columns without images or extra nested containers.

The HTML base is very simple. I’ve used specific classes on each child div rather than relying on CSS 2.1 selectors that IE6 does not support. If you don’t require IE6 support you don’t actually need the classes.

<div id="faux">
  <div class="main">[content]</div>
  <div class="supp1">[content]</div>
  <div class="supp2">[content]</div>
</div>

The percentage-width container is once again relatively positioned and a positive z-index is set. Applying overflow:hidden gets the element to wrap its floated children and will hide the overflowing pseudo-elements. The background colour will provide the colour for one of the columns.

#faux {
  position: relative;
  z-index: 1;
  width: 80%;
  margin: 0 auto;
  overflow: hidden;
  background: #ffaf00;
}

By using relative positioning on the child div‘s you can also control the order of the columns independently of their source order.

#faux div {
  position: relative;
  float: left;
  width: 30%;
}

#faux .main { left: 35%; }
#faux .supp1 { left: -28.5%; }
#faux .supp2 { left: 8.5%; }

The other two full-height columns are produced by creating, sizing, and positioning pseudo-elements with backgrounds. These backgrounds can be (repeating) images if the design requires.

#faux:before,
#faux:after {
   content: "";
   position: absolute;
   z-index: -1;
   top: 0;
   right: 0;
   bottom: 0;
   left: 33.333%;
   background: #f9b6ff;
}

#faux:after {
   left: 66.667%;
   background: #79daff;
}

The finished product is part of the Multiple Backgrounds with CSS 2.1 demo.

Example code: multiple borders

Multiple borders are produced in much the same way. Using them can avoid the need for images to produce simple effects.

An element must be relatively positioned and have sufficient padding to contain the width of the extra border you will be creating with pseudo-elements.

#borders {
   position: relative;
   z-index: 1;
   padding: 30px;
   border: 5px solid #f00;
   background: #ff9600;
}

The pseudo-elements are positioned at specific distances away from the edge of the element’s box, moved behind the content layer with the negative z-index, and given the border and background values you want.

#borders:before {
   content: "";
   position: absolute;
   z-index: -1;
   top: 5px;
   left: 5px;
   right: 5px;
   bottom: 5px;
   border: 5px solid #ffea00;
   background: #4aa929;
}

#borders:after {
   content: "";
   position: absolute;
   z-index: -1;
   top: 15px;
   left: 15px;
   right: 15px;
   bottom: 15px;
   border: 5px solid #00b4ff;
   background: #fff;
}

That’s all there is to it. The finished product is part of the Multiple Borders with CSS 2.1 demo.

Progressive enhancement and legacy browsers

IE6 and IE7 have no support for CSS 2.1 pseudo-elements and will ignore all :before and :after declarations. They get none of the enhancements but are left with the basic usable experience.

A warning about Firefox 3.0

Firefox 3.0 supports CSS 2.1 pseudo-elements but does not support their positioning. Due to this partial support, you should avoid declaring display:block for absolutely positioned pseudo-elements that explicitly declare a width or height values. However, when using borders there is no graceful fallback for Firefox 3.0. Although, sometimes an improved appearance in Firefox 3.0 can be achieved by adding display:block to pseudo-element hacks that use borders.

Enhancing with CSS3

All the applications included in this article could be further enhanced to take advantage of present-day CSS3 implementations.

Using border-radius, rgba, and transforms, and CSS3 multiple background images in tandem with pseudo-elements can produce even more complex presentations that I hope to include in a future article. Currently there is no browser support for the use of CSS3 transitions or animations on pseudo-elements.

In the future: CSS3 pseudo-elements

The proposed extensions to pseudo-elements in the CSS3 Generated and Replaced Content Module include the addition of nested pseudo-elements (::before::before), multiple pseudo-elements (::after(2)), wrapping pseudo-elements (::outside), and the ability to insert pseudo-elements into later parts of the document (::alternate).

These changes would provide a near limitless number, and arrangement, of pseudo-elements for all sorts of complex effects and presentations using just one element.

Let me know what you’ve done

I’ve focused on just a few applications and popular effects. If you find other applications, limitations, or want to share how you’ve applied this technique please leave a comment below or let me know on Twitter (@necolas.

Translations

• 使用css2.1实现多重背景、多重边框效果

For the first time since coming back to San Francisco in January, I had everything I needed for a saunter across the city in the sun: a means of taking photos / videos, a pair of sunglasses, no work, no plans, and no excuse.

On the morning of July 4th, I decided to spend the next couple of days offline. I read a book, and decided to go for a walk the rest of the day. I didn’t have any expectations or intended destination. I left my apartment at 2pm and decided to walk west, as I haven’t spent any proper time on that side of the city.

I passed through a couple of small parks and quiet neighbourhoods before hitting the edge of The Presidio.

At this point, I realised how long it had been since I’d seen a large expanse of something approximating nature. The Presidio was beautifully tranquil, with just a handful of people strolling or running through the trees. Walking off the trails, I saw a lizard for the first time in years; probably a San Francisco Alligator Lizard.

I exited The Presidio somewhere near the golf course and picked a long road to keep walking west.

On the way, I hit a main road and stood at the traffic lights. While I waited a young woman walking her dog struck up the first of several impromptu conversations I had with strangers that day. She must have seen me looking around for the street name, as she asked, “Are you lost? Are you a tourist? Where are you going?”

“I’m not sure. That way”, I said pointing down the long road before us.

She laughed. “See, you are lost!”

We chatted for a few blocks before our paths diverged. She told me that I would find some nice trails, and a good view of the Golden Gate Bridge, in the woodland near Lands End. It was dead ahead for another 30 minutes. So that’s where I went.

I hit the trails at about 4:30pm. It must have been close to perfect weather. Really sunny, warm, only a mild breeze, and the bay was completely clear. I wandered around for over an hour; perching near the edge of cliffs, taking in the sight of the Golden Gate Bridge on my right and a vast expanse of ocean to my left. Such a relaxing place.

I made time for a Dorsey-like Vine (my first Vine)…

On the way back, I crossed a road to take a photo. A post-middle-age man crossed my path, struck up a conversation, and began to tell me about his life in San Francisco “back in the day”. As if he could peer into my soul, he assured me that there was nothing wrong with being a software engineer (although he did initially think I was an estate agent; that was one of the first things he said to me).

My spirits further lifted by a stranger’s validation, I continued home. For last 30 minutes all I could think about was lying down, resting my feet, and eating. I’d been walking for nearly 6 hours. I’ll definitely do it again, but a skateboard would be helpful next time.

Twitter Lite uses Redux for state management and relies on code-splitting. However, Redux’s default API is not designed for applications that are incrementally-loaded during a user session.

This post describes how I added support for incrementally loading the Redux modules in Twitter Lite. It’s relatively straight-forward and proven in production over several years.

Redux modules

Redux modules comprise of a reducer, actions, action creators, and selectors. Organizing redux code into self-contained modules makes it possible to create APIs that don’t involve directly referencing the internal state of a reducer – this makes refactoring and testing a lot easier. (More about the concept of redux modules.)

Here’s an example of a small “redux module”.

// data/notifications/index.js

const initialState = [];
let notificationId = 0;

const createActionName = name => `app/notifications/${name}`;

// reducer
export default function reducer(state = initialState, action = {}) {
  switch (action.type) {
    case ADD_NOTIFICATION:
      return [...state, { ...action.payload, id: notificationId += 1 }];
    case REMOVE_NOTIFICATION:
      return state.slice(1);
    default:
      return state;
  }
}

// selectors
export const selectAllNotifications = state => state.notifications;
export const selectNextNotification = state => state.notifications[0];

// actions
export const ADD_NOTIFICATION = createActionName(ADD_NOTIFICATION);
export const REMOVE_NOTIFICATION = createActionName(REMOVE_NOTIFICATION);

// action creators
export const addNotification = payload => ({ payload, type: ADD_NOTIFICATION });
export const removeNotification = () => ({ type: REMOVE_NOTIFICATION });

This module can be used to add and select notifications. Here’s an example of how it can be used to provide props to a React component.

// components/NotificationView/connect.js

import { connect } from 'react-redux';
import { createStructuredSelector } from 'reselect';
import { removeNotification, selectNextNotification } from '../../data/notifications';

const mapStateToProps = createStructuredSelector({
  nextNotification: selectNextNotification
});
const mapDispatchToProps = { removeNotification };

export default connect(mapStateToProps, mapDispatchToProps);

// components/NotificationView/index.js

import connect from './connect';
export class NotificationView extends React.Component { /*...*/ }
export default connect(NotificationView);

This allows you to import specific modules that are responsible for modifying and querying specific parts of the overall state. This can be very useful when relying on code-splitting.

However, problems with this approach are evident once it comes to adding the reducer to a Redux store.

// data/createStore.js

import { combineReducers, createStore } from 'redux';
Import notifications from './notifications';

const initialState = /* from local storage or server */

const reducer = combineReducers({ notifications });
const store = createStore(reducer, initialState);

export default store;

You’ll notice that the notifications namespace is defined at the time the store is created, and not by the Redux module that defines the reducer. If the “notifications” reducer name is changed in createStore, all the selectors in the “notifications” Redux module no longer work. Worse, every Redux module needs to be imported in the createStore file before it can be added to the store’s reducer. This doesn’t scale and isn’t good for large apps that rely on code-splitting to incrementally load modules. A large app could have dozens of Redux modules, many of which are only used by a few components and unnecessary for initial render.

Both of these issues can be avoided by introducing a Redux reducer registry.

Redux reducer registry

The reducer registry enables Redux reducers to be added to the store’s reducer after the store has been created. This allows Redux modules to be loaded on-demand, without requiring all Redux modules to be bundled in the main chunk for the store to correctly initialize.

// data/reducerRegistry.js

export class ReducerRegistry {
  constructor() {
    this._emitChange = null;
    this._reducers = {};
  }

  getReducers() {
    return { ...this._reducers };
  }

  register(name, reducer) {
    this._reducers = { ...this._reducers, [name]: reducer };
    if (this._emitChange) {
      this._emitChange(this.getReducers());
    }
  }

  setChangeListener(listener) {
    this._emitChange = listener;
  }
}

const reducerRegistry = new ReducerRegistry();
export default reducerRegistry;

Each Redux module can now register itself and define its own reducer name.

// data/notifications/index.js

import reducerRegistry from '../reducerRegistry';

const initialState = [];
let notificationId = 0;

const reducerName = 'notifications';

const createActionName = name => `app/${reducerName}/${name}`;

// reducer
export default function reducer(state = initialState, action = {}) {
  switch (action.type) {
    case ADD_NOTIFICATION:
      return [...state, { ...action.payload, id: notificationId += 1 }];
    case REMOVE_NOTIFICATION:
      return state.slice(1);
    default:
      return state;
  }
}

reducerRegistry.register(reducerName, reducer);

// selectors
export const selectAllNotifications = state => state[reducerName];
export const selectNextNotification = state => state[reducerName][0];

// actions
export const ADD_NOTIFICATION = createActionName(ADD_NOTIFICATION);
export const REMOVE_NOTIFICATION = createActionName(REMOVE_NOTIFICATION);

// action creators
export const addNotification = payload => ({ payload, type: ADD_NOTIFICATION });
export const removeNotification = () => ({ type: REMOVE_NOTIFICATION });

Next, we need to replace the store’s combined reducer whenever a new reducer is registered (e.g., after loading an on-demand chunk). This is complicated slightly by the need to preserve initial state that may have been created by reducers that aren’t yet loaded on the client. By default, once an action is dispatched, Redux will throw away state that is not tied to a known reducer. To avoid that, reducer stubs are created to preserve the state.

// data/createStore.js

import { combineReducers, createStore } from 'redux';
import reducerRegistry from './reducerRegistry';

const initialState = /* from local storage or server */

// Preserve initial state for not-yet-loaded reducers
const combine = (reducers) => {
  const reducerNames = Object.keys(reducers);
  Object.keys(initialState).forEach(item => {
    if (reducerNames.indexOf(item) === -1) {
      reducers[item] = (state = null) => state;
    }
  });
  return combineReducers(reducers);
};

const reducer = combine(reducerRegistry.getReducers());
const store = createStore(reducer, initialState);

// Replace the store's reducer whenever a new reducer is registered.
reducerRegistry.setChangeListener(reducers => {
  store.replaceReducer(combine(reducers));
});

export default store;

Managing the Redux store’s reducer with a registry should help you better code-split your application and modularize your state management.

The NCMC chaired by Cabinet Secretary Rajiv Gauba met on Friday to review the situation arising out of the gas leak

Briskin, Alan, 1954-

Godfrey, Paul C., author

Greene, Jeffrey R., author

Brown, Paul C

Finney, Martha I., author

Dobson, Michael Singer, author

Ferguson, Matt

Goulston, Mark

Wells, April. author

Hamper, Robert J

Havens, Jeff, author

Dalton, Maxine A., author

London, Jonathan

Stull, Edward. author

Foreman, Park

Festival of Water (2004 : India International Centre)

Satheesh, Mithun, author

Wilson, Meena S., author

Wartzman, Rick

Zacker, Craig

Ellis, Charles D

Ellis, Charles D., author

LeMay, Matt, author