Bradley’s stainless steel enclosed safety shower model is ideal for indoor applications such as data centers, chip manufacturing and other high-tech facilities, laboratories, pharmaceutical and chemical processing facilities, and other clean room applications.

Designed By: Elaine, Jewelry Designer, Exclusively for Fire Mountain Gems and Beads

Designed By: Patti, Jewelry Designer, Exclusively for Fire Mountain Gems and Beads®

The cylinders are a direct drop-in replacement for both PFI equipment and that from other OEMs.

Slow-cooled CF8M duplex stainless steel is used for critical parts of the primary coolant pipes of nuclear reactors. This steel can endure severe service conditions, but it tends to become more brittle upon very long-term aging (tens of years). Therefore, it is essential to understand its specific microstructure and temporal evolution. As revealed by electron backscatter diffraction (EBSD) analyses, the microstructure consists of millimetre-scale ferritic grains within which austenite lath packets have grown with preferred crystallographic orientations concerning the parent ferritic phase far from the ferrite grain boundaries. In these lath packets where the austenite phase is nucleated, the lath morphology and crystal orientation accommodate the two ferrite orientations. Globally, the Pitsch orientation relationship appears to display the best agreement with the experimental data compared with other classical relationships. The austenite lath packets are parallel plate-shaped laths, characterized by their normal n. A novel methodology is introduced to elucidate the expected relationship between n and the crystallographic orientation given the coarse interfaces, even though n is only partly known from the observation surface, in contrast to the 3D crystal orientations measured by EBSD. The distribution of retrieved normals n is shown to be concentrated over a set of discrete orientations. Assuming that the ferrite and austenite obey the Pitsch orientation relationship, the determined lath normals are close to an invariant direction of the parent phase given by the same orientation relationship.

Multi-Conveyor recently built a series of stainless steel plastic chain conveyors, in stages, to transport both full and empty cases of food product through nearly 50 feet of conveyance.

HANTEMP Controls has unveiled a new line of stainless steel control valves & modules for pressure, temperature, and liquid control.

EXAIR's new Dual 316 Stainless Steel Cabinet Cooler Systems with ETC (Electronic Temperature Control) keep electrical enclosures cool with 20°F (-7°C) air while maintaining the NEMA 4X rating of the enclosure and removing the heat that could adversely affect the internal components.

REVIEW – Look at my fancy coffee maker! The PINKAH Stainless Steel French Press Coffee Maker is a contemporary take on the French Press design that features an innovative leakproof pouring mechanism and a double-walled design that keeps your beverages hot for hours. We love all the coffee things, so let’s learn more. To the […]

As more companies learn of the high-quality, attractively metal cable glands and accessories from HJSI Connector the manufacturer's sales are being made into new countries. The latest breakthrough was a large order delivered to a client in Saudi Ara

Surgical needles are produced from martensitic precipitation-hardening stainless steel and then vacuum heat treated and vacuum cooled to increase its tensile strength while retaining the polished surface of the needle. A needle made by this process is also disclosed.

A power tool for installing a metal locking tie is disclosed. The power tool includes a body and a power chassis. The body of the tool includes a gear carrier, a tensioning mechanism and a cutting mechanism. The gear carrier is positioned in the tool body and the tensioning mechanism is mounted in the gear carrier. The cutting mechanism engages the gear carrier. As the tie is tensioned, the gear carrier moves linearly in the tool body to cut the tensioned tie.

Various embodiments of the invention provide a low nickel austenitic stainless steel alloy composition including about 0.6% to about 0.8% by weight carbon; about 16% to about 18% by weight chromium; about 4.5% to about 5.5% by weight nickel; about 2.0% to about 5.0% by weight manganese; about 0.8% to about 1.2% by weight tungsten; about 0.8% to about 1.2% by weight molybdenum; about 0.65% to about 0.85% by weight niobium; about 0.3% to about 1.0% by weight silicon; balance iron and unavoidable impurities, wherein percentages are based on the overall weight of the composition. The invention further provides articles, such as turbine housings, prepared using the inventive alloys.

The invention relates to a low-nickel austenitic stainless steel with high resistance to delayed cracking and the use of the steel. The steel contains in weight % 0.02-0.15% carbon, 7-15% manganese, 14-19% chromium, 0.1-4% nickel, 0.1-3% copper, 0.05-0.3% nitrogen, the balance of the steel being iron and inevitable impurities, and the chemical composition range in terms of the sum of carbon and nitrogen contents (C+N) and the measured Md3o-temperature is inside the area defined by the points ABCD which have the following values Point Md30° C. C+N % A−80 0.1 B+7 0.1 C−40 0.40 D−80 0.40.

Stainless steel rebars

Stainless Steel Railing System