RMI Access Telemedicine and Case Management provide 24/7 year-round access to licensed medical providers trained in industrial injury management in all 50 states. The telemedicine service gives workers access via chat or video – or telephone if internet service is unavailable.

The RKC-500 Detect-A-Finger drop-probe device prevents welding machinery from starting its stroke if a finger or hand is detected in the point-of-operation area. Key components are a sensing probe module with a rod shaped to fit over or around the work piece and a control module.

When a potentially dangerous process requires synchronous action by both hands to release or maintain the operation of a machine, the Duelco line of 2 Hand Control Stations with E-Stop button will effectively ensure the protection of the operator.

Using weight sensors, pressure-sensitive safety mats detect the presence of workers, vehicles, or production materials and trigger an emergency stop that removes power from hazardous machinery. Only by removing pressure from the mat and switching on the control unit will power be restored to the machine.

CleanCab is an elevator purification device powered by ActivePure Technology, which is proven to neutralize viruses in the air and on surfaces – including SARS-CoV-2, the virus that causes COVID-19. The system provides active 24/7 year-round disinfection by pulling oxygen and water molecules in the air through ActivePure’s patented honeycomb matrix where powerful oxidizers, known as ActivePure molecules, are created.

Protector Series Light Curtains help safeguard employees working near industrial machinery that has the potential to cause injury.

Mezzanine Safeti-Gates Inc. has extended options for power, remote operation and tracking through its full line of pallet drop safety gates. New configurations work within the flow of a facility’s applications, offer no-touch environments and have custom engineered designs.

This NH3 long-life ammonia sensor works optimally regardless of how much it has been exposed to ammonia. It’s ideal in environments where ammonia could be present 24/7 – including refrigeration facilities, fertilizer manufacturing and livestock farms.

The G6 personal gas detector is a fully connected and intuitive solution that leverages the latest in Internet of Things cellular connectivity.

In the event of a power interruption, the Sensing-Saf-Start automatically disconnects power to a machine so that when power is restored, the machine won’t restart. Only after the reset button has been pressed by the machine operator can the machine be restarted.

The KNAACK Scaffold Armour is an easy-to-install panel system that converts the widely used standard 6-foot baker-style scaffold into a lockable storage solution for security on the jobsite.

The CoolMan Zone Fan is designed to balance the temperature in your facility while preventing hot or cold spots. With a coverage of 1,200 to 2,500 square feet, the fan mixes air from ceiling to floor in a continuous, concise column.

This line of mirrors, available in sizes from 18.7 to 74.8 inches, enables safety professionals to guard multiple sides of a work cell using only one emitter/receiver pair.

Capable of stopping impacts at levels equivalent to its steel counterparts, the GuardRite Polymer Safety Barrier is made from scratch-resistant, impact-modified polypropylene. It bends and absorbs collisions – then returns to its original shape – with little or no damage to floors, material handling equipment or the barriers themselves.

These optional post hoists allow a conveyor to safely be raised and precisely positioned in elevated installations and lowered for easy access and cleaning – eliminating the need for workers to climb ladders or stairs or onto mezzanines.

This redesigned assortment of spill-containment pallets now features a compact, space-saving design. Available in painted or galvanized steel, the pallets are designed to catch spills, leaks and drips to keep work areas safe, clean and neat.

The newly designed Roly safety gate protects people and products with a high-strength, high-visibility netting system on the ledge side gate that prevents products from falling from elevated storage systems.

NITEGLOW’s photoluminescent technology provides a way for workers and others to find lighted paths in dark work environments. NITEGLOW has anti-slip properties even when wet, adding an extra measure of safety for workers navigating in the dark.

The Model RG (Ready Gate) is an adjustable, self-closing safety gate available in two sizes, protecting guardrail openings of 16” to 26” and 24” to 40”. The gate can be field mounted and open to the right or left.

Offering a fast, safe and efficient way to refill intermediate bulk container totes, the Falcon Funnel XL model is made of chemical-resistant polyethylene. The funnel is easily fitted to a standard tote and has a storage pocket for an IBC locking lid and a discharge basin with side storage areas.

With its quarter-inch thick steel outer plate, the RemainSafe storm shelter is designed to withstand EF5 tornadoes, which can generate winds in excess of 250 mph.

Designed to hold up to 500 pounds, this semi-powered ball transfer conveyor table allows workers to slide products on or off shelves 12 to 48 inches high without lifting. The product can be rolled onto the table and maneuvered to the desired direction.

The Split Bedding Cart makes it safer and easier to rebrick the bottoms of kilns. The split deck gives workers increased access to materials during refractory brick installation.

Ideal for storage of lithium-ion batteries, the Rack Fire Protect non-occupancy buildings are fire rated for two hours at 2,000° F. The containment facilities minimize the risk of fire spreading from damaged, malfunctioning or deep-discharged batteries to the workplace.

The Series 9M mesh railing features a code-compliant, contemporary design and combines a modern look with the benefits of low-maintenance aluminum frames.

EasyHeat SnoMelter mats melt snow on stairs, driveways, sidewalks and patios, reducing the need to manually clear snow. The mats are installed below asphalt surfaces, under pavers or in concrete, and are then connected to standard 240 voltage.

Ideal for use over peninsulas, these island canopy hoods are rust proof; chemical resistant; and designed to collect and exhaust heat, steam, corrosive vapors and odors.

Worker and plant safety can be enhanced via a new proprietary ultraviolet-resistant coating for fiberglass-reinforced polymer products.

To address fire door deficiencies in various work settings, use this 13-point inspection and repair process to ensure compliance with NFPA 80 standards.

The multipurpose T500 wiper is part of the Toolbox WaterWeave line. This light-duty wipe is solvent resistant; contaminant free; and combines strength, durability and absorbency.

The VAC-U-MAX Model 55SR Submerged Recovery vacuum cleaner renders reactive powders such as metal powders used in additive manufacturing and 3D printing inert by drawing them under a level of liquid.

Washington – A new booklet from NIOSH describes safe work practices to help residential construction workers avoid manual material handling injuries.

Phoenix – OSHA’s threat to take away Arizona’s oversight of construction safety – prompted by alleged inadequacies in the state’s fall protection standard – is unnecessary in light of recently passed legislation, an attorney representing the state said in a May 1 letter to the federal agency.

Whitewater, WI – One-third of residential construction contractors who participated in a recent study said their firms lacked written safety programs, according to researchers from the University of Wisconsin-Whitewater.

Phoenix – As it faces losing its State Plan status, the Arizona Division of Occupational Safety and Health is standing by its assertion that the state’s fall protection standard is “as effective as” federal OSHA’s requirement.

Phoenix – The Arizona Division of Occupational Safety and Health believes OSHA will reject the state’s residential construction fall protection standard, and has scheduled free classes on complying with federal fall protection requirements.

St. Louis – In an effort to help residential construction workers stay safe, a new website is providing details on fall protection methods and equipment.

Washington – A new fact sheet from OSHA is intended to protect residential construction workers operating in confined spaces such as attics, basements and crawl spaces.

McLean, VA – The International Window Cleaning Association outlines hazards and best practices to help protect window cleaners on the job in its newly released field safety guide.

Silver Spring, MD — As the use of solar energy panels continues to increase, Prevention through Design methods may help keep contractors safe during installation of the panels on small residential buildings, according to a recent report from the Center for Construction Research and Training, also known as CPWR.

Washington — In response to the particularly heavy impact the opioid crisis is having on the construction industry, the National Association of Home Builders has introduced several free resources intended to help residential construction organizations combat the issue.

Tumwater, WA — The Washington State Fatality Assessment and Control Evaluation Program has published three new narratives in Spanish.

Hamilton, NJ — Leaders and workers in the civil construction industry lack training and resources on addressing and promoting mental health, according to a recent report published by Dodge Data & Analytics.

Silver Spring, MD — Around two-thirds of construction worker deaths over a recent 11-year period were the result of “Focus Four”-related injuries, a new report says.

Washington — A new pamphlet from NIOSH offers tips to mitigate common risks that construction workers face.

Silver Spring, MD — A new training program from CPWR – The Center for Construction Research and Training is aimed at helping residential construction supervisors improve their communication and leadership skills.

Constructed to be truly non-flammable, the Ultimate Baselayer keeps comfortable heat in during winter conditions and extreme heat out when facing dangerous conditions.

The SSCL3LZ Hoodie is an ANSI Class 3 lime hoodie-style jacket with an attached drawstring hood and zipper-front closure.

GlenGuard’s flame-resistant garments provide workers with lighter, more comfortable arc-rated fabrics.

The Dragon Shield Soft Shell Jacket features an improved design that reshaped the sleeves and added shirt-style cuffs with adjustable snap closures, a drop-tail hem and stretchy shock cords with side-lock adjustments.