We derive finite rational formulas for the traces of cycle integrals of certain meromorphic modular forms. Moreover, we prove the modularity of a completion of the generating function of such traces. The theoretical framework for these results is an extension of the Shintani theta lift to meromorphic modular forms of positive even weight.

The article is devoted to the expansion of iterated Stratonovich stochastic integrals of arbitrary multiplicity $k$ $(kinmathbb{N})$ based on the generalized iterated Fourier series. The case of Fourier-Legendre series as well as the case of trigonotemric Fourier series are considered in details. The obtained expansion provides a possibility to represent the iterated Stratonovich stochastic integral in the form of iterated series of products of standard Gaussian random variables. Convergence in the mean of degree $2n$ $(nin mathbb{N})$ of the expansion is proved. Some modifications of the mentioned expansion were derived for the case $k=2$. One of them is based of multiple trigonomentric Fourier series converging almost everywhere in the square $[t, T]^2$. The results of the article can be applied to the numerical solution of Ito stochastic differential equations.

In this paper we consider Wronskian polynomials labeled by partitions that can be factorized via the combinatorial concepts of $p$-cores and $p$-quotients. We obtain the asymptotic behavior for these polynomials when the $p$-quotient is fixed while the size of the $p$-core grows to infinity. For this purpose, we associate the $p$-core with its characteristic vector and let all entries of this vector simultaneously tend to infinity. This result generalizes the Wronskian Hermite setting which is recovered when $p=2$.

Given a standard graded polynomial ring over a commutative Noetherian ring $A$, we prove that the cohomological dimension and the height of the ideals defining any of its Veronese subrings are equal. This result is due to Ogus when $A$ is a field of characteristic zero, and follows from a result of Peskine and Szpiro when $A$ is a field of positive characteristic; our result applies, for example, when $A$ is the ring of integers.

With a relatively successful 2019, I am hitting the ground running into 2020. This is the first year in a long time where I feel like I am at a good starting point. One of the big realizations from the past year…

As COVID-19 fears grew, public officials and sports execs contemplated health risks — and debated a PR message — but let 33,000 fans into a Seattle Sounders soccer match, emails show. By Ken Armstrong, ProPublica, and David Gutman and Lewis Kamb, The Seattle Times On March 6, at 2:43 p.m., the health officer for Public Health — Seattle & King County, the hardest-hit region in the first state to be slammed by COVID-19, sent an email to a half-dozen colleagues, saying, “I want to cancel large group gatherings now.”…

Two beloved Spokane-based entertainers are teaming up this weekend for a good cause.…

Yesterday, Spokane Mayor Nadine Woodward and other local leaders urged Gov. Jay Inslee to allow Spokane County to open on a different schedule than the rest of the state.  Inslee, however, wouldn't budge.…

A surfactant composition for agricultural chemicals, containing fatty acid polyoxyalkylene alkyl ether expressed by the following general formula (I), R1CO(EO)m(PO)nOR2 (I) wherein the fatty acid polyoxyalkylene alkyl ether has a narrow ratio of 55% by mass or more, where the narrow ratio is expressed by the following formula (A): Narrow ratio=Σi=nMAX−2i=nMAX+2Yi (A).

Methods of separating renewable materials, such as lipids, from microorganisms, such as oleaginous yeasts, may include conditioning cell walls of the microorganisms to form, open or enlarge pores, and removing at least a portion of the renewable material through the pores. These methods may result in delipidated microorganisms with cell walls that are substantially intact and with mesopores. These delipidated microorganisms may be used to produce biofuels.

The invention relates to the use of a composition of A) at least one quaternary ammonia compound comprising at least one organic radical bonded to the ammonia nitrogen atom and optionally comprising heteroatoms and having 1 to 36 carbon atoms, and B) at least one amine alkoxylate ester of formula (1) or a salt thereof, where A, B are, independently of each other, a C2- through C5-alkylene radical R1, a C8- through C24-alkyl radical or alkenyl radical R2, R3, R4 independent of each other, H, or a C8- through C24-acyl radical, with the stipulation that at least one of the radicals R2, R3 or R4 stands for a C8- through C24-acyl radical, and x, y, z, independently of each other, stand for a whole number from 0 through 50, with the stipulation that x+y+z is a whole number from 1 through 100, in quantities of 10 through 5000 g/tonne of ore as a collector in silicate floation.

Polyamide molding materials for transparent molding parts. The materials comprise transparent copolyamides that contain: (A) 40 to 100 wt % of at least one transparent copolyamide with a glass transition temperature (Tg) of at least 80° C. and not more than 150° C., composed of at least two diamines that are different from each other, wherein the at least two diamines are a mixture of (a) 50 to 90 mol % bis-(4-amino-3-methylcyclohexyl)methane (MACM) and/or bis-(4-amino-3-ethylcyclohexyl)methane (EACM) and/or bis-(4-amino-3,5-dimethylcyclohexyl)methane (TMACM) and b) 10 to 50 mol % aliphatic diamine having 9 to 14 carbon atoms, in particular decandiamine, particularly preferably at least 20 mol % decandiamine, each relative to the total amount of diamines, and of one or more aliphatic dicarboxylic acids, having 6 to 36 carbon atoms, (B) 0 to 60 wt % of at least one further polymer, (C) 0 to 10 wt % of additives, the sum of the components (A), (B) and (C) totaling 100% by weight.

Disclosed is a process for preparing bridged Group 4 metal complexes containing a neutral diene ligand starting from the corresponding novel, metal diene containing complexes by reaction thereof with the divalent derivative of a bridged bidentate ligand compound. The novel, intermediate metal diene complexes, their formation from tetravalent metal salts and an integrated process combining both process steps are claimed.

Methods for removing parasites and in particular ectoparasites of vertebrates, in particular of mammals, and compositions for the implementation of this method.Methods for removing parasites of vertebrates, and in particular arthropods, mainly insects and Arachnida, wherein an effectively parasiticidal amount of a compound of formula (I) ##STR1## in particular of fipronil, is administered to the animal via an administration route which makes possible systemic distribution and good absorption.

A plurality of soda-lime glass batch materials are formed into granules that include a core and a shell surrounding the core. The core comprises a first portion of the plurality of glass batch materials, and the shell comprises a remaining portion of the plurality of glass batch materials. These core-shell granules can be melted in a glass furnace to produce molten soda-lime glass in less time and at a lower temperature than conventional soda-lime glass batch preparations.

Disclosed is a process for biomass conversion which includes co-processing the biomass with thermoplastic and non-thermoplastic polymer based materials in a catalytic pyrolysis reactor to convert such to liquid hydrocarbons; wherein hydrogen atoms originating with the polymer materials can remove oxygen from oxygenated hydrocarbons produced in the conversion of the biomass in the reactor.

A particle-polymer hybrid material can include: a substance having the structure of Formula 1 Z(Y-FP)m, wherein Z is a particle smaller than 1 mm; m is an integer; Y is a linker including a silicon atom linked to the particle; FP is a functionalized polymer having: a first structure derived from a first norbornene compound linked to the Y; and one or more repeating units linked to the first structure, each unit being derived from a second norbornene compound and having a functional group.

A process for the production of nanocrystals or amorphous nanoparticles of actives (nanomaterials), especially from the peels of grapes. A dispersion of a micrometer-sized material in a solution of surfactant or a steric stabilizer is first provided. The macrosuspension is then stirred for at least 1 minute at a rotational speed above 500 rpm using a rotor-stator mixer. The stirred mixture is passed through a jet stream or piston-gas type high pressure homogenizer. The nanomaterials produced can be incorporated into formulations for use as nutraceutical, nutritional supplement, or as supportive treatment in medical therapy. The active can be derived from the peels of grapes.

Disclosed are soft, high refractive index, acrylic device materials. The materials contain a copolymeric additive for glistening resistance.

Disclosed herein are surface treatments for soft silicone gel materials such as silicone intraocular lenses.

Methods of capturing and immobilizing radioactive nuclei with metal fluorite-based inorganic materials are described. For example, a method of capturing and immobilizing radioactive nuclei includes flowing a gas stream through an exhaust apparatus. The exhaust apparatus includes a metal fluorite-based inorganic material. The gas stream includes a radioactive species. The radioactive species is removed from the gas stream by adsorbing the radioactive species to the metal fluorite-based inorganic material of the exhaust apparatus.

Apparatus comprising an input connected to receive an input signal, a lookup table comprising a plurality of input entries and first and second output entries for each input entry. The look up table receives the input signal and returns a lower input entry, an upper input entry, the second output entry for the lower input entry, and the first output entry for the upper input entry. A first subtractor subtracts the lower input entry from the input signal to produce a first difference. A second subtractor subtracts the input signal from the upper input entry to produce a second difference. First and second multipliers multiply the first and second differences by the first output entry for the upper input entry and the second output entry for the lower input entry, respectively, to produce first and second products. An adder adds the first and second products to produce an output signal.

Systems, devices, processors, and methods are described which may be used for the reception of a wireless broadband signal at a user terminal from a gateway via a satellite. A wireless signal may include a series of physical layer frames, each frame including a physical layer header and payload. The received signal is digitized and processed using various novel physical layer headers and related techniques to synchronize the physical layer frames and recover data from physical layer headers for purposes of demodulation and decoding.

Fluorinated aromatic materials, their synthesis and their use in optoelectronics. In some cases, the fluorinated aromatic materials are perfluoroalkylated aromatic materials that may include perfluoropolyether substituents.

Method for making a liquid foam from graphene. The method includes preparing an aqueous dispersion of graphene oxide and adding a water miscible compound to the aqueous dispersion to produce a mixture including a modified form of graphene oxide. A second immiscible fluid (a gas or a liquid) with or without a surfactant are added to the mixture and agitated to form a fluid/water composite wherein the modified form of graphene oxide aggregates at the interfaces between the fluid and water to form either a closed or open cell foam. The modified form of graphene oxide is the foaming agent.

A polyether polyol based on renewable materials is obtained by the in situ production of a polyether from a hydroxyl group-containing vegetable oil, at least one alkylene oxide and a low molecular weight polyol having at least 2 hydroxyl groups. The polyol is produced by introducing the hydroxyl group-containing vegetable oil, a catalyst and an alkylene oxide to a reactor and initiating the alkoxylation reaction. After the alkoxylation reaction has begun but before the reaction has been 20% completed, the low molecular weight polyol having at least 2 hydroxyl groups is continuously introduced into the reactor. After the in situ made polyether polyol product having the desired molecular weight has been formed, the in situ made polyether polyol is removed from the reactor. These polyether polyols are particularly suitable for the production of flexible polyurethane foams.

Processes are disclosed for the conversion of a carbohydrate source to hexamethylenediamine (HMDA) and to intermediates useful for the production of hexamethylenediamine and other industrial chemicals. HMDA is produced by direct reduction of a furfural substrate to 1,6-hexanediol in the presence of hydrogen and a heterogeneous reduction catalyst comprising Pt or by indirect reduction of a furfural substrate to 1,6-hexanediol wherein 1,2,6-hexanetriol is produced by reduction of the furfural substrate in the presence of hydrogen and a catalyst comprising Pt and 1,2,6-hexanediol is then converted by hydrogenation in the presence of a catalyst comprising Pt to 1,6 hexanediol, each process then proceeding to the production of HMDA by known routes, such as amination of the 1,6 hexanediol. Catalysts useful for the direct and indirect production of 1,6-hexanediol are also disclosed.

In one embodiment, the present application discloses methods to selectively synthesize higher alcohols and hydrocarbons useful as fuels and industrial chemicals from syngas and biomass. Ketene and ketonization chemistry along with hydrogenation reactions are used to synthesize fuels and chemicals. In another embodiment, ketene used to form fuels and chemicals may be manufactured from acetic acid which in turn can be synthesized from synthesis gas which is produced from coal, biomass, natural gas, etc.

The present invention relates to I- and II-type crystals of L-α-glyceryl phosphoryl choline, and to a method for preparing same. More particularly, the present invention relates to noble I- and II-type anhydride crystals of L-α-glyceryl phosphoryl choline, which have a higher purity than conventional liquid L-α-glyceryl phosphoryl choline, and one advantage of which is that formulations and dosages of pharmaceuticals are easily modified, and another advantage of which is that the hygroscopicity of the crystals are much lower than that of conventional polymorphic crystals, providing excellent stability during storage. The present invention also relates to a method for preparing the I- and II-type crystals of L-α-glyceryl phosphoryl choline. The I-type crystal of L-α-glyceryl phosphoryl choline is characterized by having an onset temperature of 147° C. and an absorption peak of 150° C. based on differential scanning calorimeter (DSC) analysis, and by having diffraction patterns where 2θ-diffraction angles are 9.8±0.2°, 12.0±0.2°, 14.3±0.2°, 15.8±0.2°, and 19.6±0.2° based on X-ray diffraction (XRD) analysis. The II-type crystal of L-α-glyceryl phosphoryl choline is characterized by having an onset temperature of 62° C. and an absorption peak of 66° C., and an onset temperature of 141° C. and an absorption peak of 145° C. based on DSC analysis, and having diffraction patterns where 2θ-diffraction angles are 10.3±0.2°, 12.2±0.2°, 13.4±0.2°, 14.8±0.2°, and 20.6±0.2° based on XRD analysis.

An apparatus for measuring a time interval between a start signal edge and a stop signal edge provides a stable clock signal as input to a delay line formed by a series of similar logic gates. The output signal of the last gate of the series is phase locked to the clock signal by adjusting a bias signal controlling the switching speed of all gates. The clock signal and the output signal of each gate form a set of phase distributed periodic timing signals applied to a start time measurement unit (TMU) and a similar stop TMU. The start TMU counts edges of one of the timing signals occurring between an edge of an arming signal and the start signal edge and generates output data representing a time delay between the arming signal and the start signal edge. The data represents the start delay as a whole and fractional number of clock signal periods by conveying the counter output and by indicating which of the timing signals had an edge most closely following the start signal edge. The stop TMU similarly produces output data indicating a whole an fractional number of clock cycles occurring between the arming signal and the stop signal edge. The delay represented by the start TMU output data is subtracted from the delay represented by the stop TMU output data to determine the interval between the start and stop signal edges.

In a process for the separation and drying of crude carboxylic acid crystals from a slurry in a solvent, the slurry is supplied to a filter operating at pressure and at a temperature above the atmospheric boiling point of the solvent. A cake of separated crystals is removed from the filter and passed to a thermal dryer. In a system for the separation and drying of crude carboxylic acid from a slurry in a solvent, a pressure filter device has a slurry inlet and an outlet for a cake of carboxylic acid crystals. The system also has a thermal dryer and means for transporting the cake of carboxylic acid crystals from the pressure filter device to the dryer. The pressure filter device is configured to operate at a pressure and temperature above the atmospheric boiling point of the solvent.

A carbonylation process for making acetic acid using a metallic co-catalyst composition, effective as a rhodium stabilizer and/or rate promoter, at molar ratios of metal/rhodium of about 0.5 to 40. The process includes reacting methanol with carbon monoxide in the presence of a rhodium-based catalytic metal complex with about 1 to 20 weight percent methyl iodide, less than about 8 weight % water and about 0.5 to about 30 weight percent methyl acetate. The crude acetic acid is flashed and further purified.

The present invention is directed to L-proline and citric acid co-crystals of (2S,3R,4R,5S,6R)-2-(3-((5-(4-fluorophenyl)thiophen-2-yl)methyl)-4-methylphenyl)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol, pharmaceutical compositions containing said co-crystals and their use in the treatment glucose-related disorders such as Type 2 diabetes mellitus and Syndrome X.

A feed additive includes at least one of p-thymol, a salt derivative and an ester derivative thereof for animals.

The present invention relates to photochromic materials that include one or more indeno-fused naphthopyrans that have particular groups at the 7, 11, and 13 positions thereof, and at the position alpha to the oxygen of the pyran ring thereof. With some embodiments, hydrogen or an alkoxy group is bonded to the 7 position, an optionally substituted phenyl is bonded to the 11 position, two alkyl groups are bonded to the 13 position, and two optionally substituted phenyl groups are bonded to the position alpha to the oxygen of the pyran ring of the indeno-fused naphthopyran compound. The 13 position of the indeno-fused naphthopyrans is free of ether groups in which an ether oxygen is bonded to the 13 position, and hydroxyl. The present invention also relates to photochromic articles and compositions that include such indeno-fused naphthopyrans.

A process for the preparation of 1,3:2,4-bis(4-methylbenzylidene)sorbitol (MDBS) and 1,3:2,4-bis(3,4-dimethylbenzylidene)sorbitol (DMDBS) via a dehydrocondensation reaction is disclosed. The reaction is carried out between an aldehyde and an alditol in a mole ratio of 2:1 wherein ionic fluid is used as the acidic catalyst and/or reaction medium. The ionic fluid used in accordance with the present invention is quaternary ammonium salt based ionic liquid.

Disclosed herein are mesocapsules that include agriculturally active ingredients. These mesocapsules are comprised of a polyurea shell and include hydrophilic groups on their surfaces and have a volume-average diameter of about 500 nm or less and some of them have a volume-average diameter on the order of about 300 nm or less. These mesocapsules are suited for delivering active ingredients that are not very soluble in water. Methods for making these mesocapsules include interfacial polycondensation reactions carried out in the presence of surfactants and other methods in which all or most of the surfactant is replaced by adding amino acids to the aqueous phase of the interfacial reaction mixture before forming the final emulsion.

Solid-state deformation processing of crosslinked high molecular weight polymers such as UHMWPE, for example by extrusion below the melt transition, produces materials with a combination of high tensile strength and high oxidative stability. The materials are especially suitable for use as bearing components in artificial hip and other implants. Treated bulk materials are anisotropic, with enhanced strength oriented along the axial direction. The material is oxidatively stable even after four weeks of accelerated aging in a pressure vessel containing five atmospheres of oxygen (ASTM F2003). Because of its oxidative stability, the deformation processed material is a suitable candidate for air-permeable packaging and gas sterilization, which has thus far been reserved for remelted crosslinked UHMWPE.

The invention relates to a dental material which comprises a polymerizable bisphosphonic acid of Formula I: The invention also relates to the use of a polymerizable bisphosphonic acid of Formula I for the preparation of a dental material and in particular for the preparation of an adhesive, cement or composite.

A method for producing synthetic hydrocarbons from at least one carbonaceous material is provided. The method includes evaluating the resources of the carbonaceous material available on a determined territory; determining from the resources a total production capacity of synthetic hydrocarbons; determining from the total production capacity, a number of elementary production units required for obtaining the total production capacity, each elementary production unit having an elementary production capacity between a 100 and a 1,000 barrels a day of synthetic hydrocarbons; building the number of elementary production units on the territory; transporting the carbonaceous material from the territory as far as the elementary production units; producing the synthetic hydrocarbons in the elementary production units from the transported carbonaceous material.

Disclosed are polysulfone-based materials that can be used as active and/or passive components in various electronic, optical, and optoelectronic devices, particularly, metal-oxide-semiconductor field-effect transistors. For example, various metal-oxide-semiconductor field-effect transistors can include a dielectric layer and/or a passivation layer prepared from such polysulfone-based materials and exhibit good device performance.

Methods and devices for determining optimal Atrial to Ventricular (AV) pacing intervals and Ventricular to Ventricular (VV) delay intervals in order to optimize cardiac output. Impedance, preferably sub-threshold impedance, is measured across the heart at selected cardiac cycle times as a measure of chamber expansion or contraction. One embodiment measures impedance over a long AV interval to obtain the minimum impedance, indicative of maximum ventricular expansion, in order to set the AV interval. Another embodiment measures impedance change over a cycle and varies the AV pace interval in a binary search to converge on the AV interval causing maximum impedance change indicative of maximum ventricular output. Another method varies the right ventricle to left ventricle (VV) interval to converge on an impedance maximum indicative of minimum cardiac volume at end systole. Another embodiment varies the VV interval to maximize impedance change.

An apparatus for forming pressed food products can utilize up to 98% chicken breast meat in high profit margin products. Breast meat is marinated and then extruded into a slab which is then frozen and shaped into a plank. The plank is sliced into unit portions which are then pressed into shaped portions with a preferred, or other, press. One preferred press linearly reciprocates unit portions into the press. This or another preferred press imparts three dimension exterior shape to the pressed food products.

Described is a bass drum foot pedal having a variable drive lever linkage with variable arc ratios connecting the foot pedal to a beater bracket. The beater bracket is formed with a mounting surface that tips a beater shaft forward to create a forward beater angle that maximizes the beater impact against a bass drum.

An apparatus, system and method for mixing and dispensing dental impression materials is described. A dental impression material mixing machine comprises a water dispenser fluidly coupled to a hollow mixing axle, the mixing axle extending through a pulley, wherein an inner circumference of the hollow mixing axle forms a water conduit and an outer circumference of the hollow mixing axle forms a hub connector, a closeable valve inserted at a water entrance to the water conduit and electronically coupled to a water pump, an electronically commutated motor rotatably coupled to the pulley, wherein the hub connector receives a tubular rotatable hub of a disposable mixing vessel comprising dry dental impression powder, and wherein water is dispensed from the water dispenser into the disposable mixing vessel through the water conduit and hub orifice.

The present invention discloses a high intensity ultrasonic treatment method and apparatus that is used in conjunction with an existing commercial dough or batter mixer to enhance the rheological, aeration and textural properties of the dough or batter. This change in properties is a result of the phenomenon of acoustic cavitation induced in the dough or batter by treatment with high intensity ultrasonic waves. The present invention discloses a mixing bowl (20) of an existing mixer system that is preloaded with dough or batter, the bowl (20) is located at the center of an ultrasonic bath tank (101) filled with a working fluid. The effect of ultra-sonic waves with power levels above 1 kW can be observed over the entire or partial mixing period of the dough or batter. The ultra-sonic waves of the present invention are generated by a plurality of ultrasonic wave generators (104A, 104B) and piezoelectric transducers (1) mounted on a stainless steel tank (101). The electrical energy received in each transducer (1) will be converted into appropriate mechanical expansion and contractions in the piezoelectric ceramics of the transducer (1) thus leading to pressure waves being transmitted to the dough or batter to be mixed. The generation and transmission of high intensity ultrasonic waves to the dough or batter affects its rheological, aeration and textural properties.

An abrasive article including a base having an annular shape defining a central opening; and a mounting assembly coupled to the base, wherein a portion of the mounting assembly is under a compressive force, and a grinding segment coupled to the mounting member.

Lubrication additives of the current invention require formation of emulsions in base lubricants, created with an aqueous salt solution plus a single-phase compound such that partitioning within the resulting emulsion provides thermodynamically targeted compounds for boundary layer organization thus establishing anti-friction and/or anti-wear. The single-phase compound is termed “boundary layer organizer”, abbreviated BLO. These emulsion-contained compounds energetically favor association with tribologic surfaces in accord with the Second Law of Thermodynamics, and will organize boundary layers on those surfaces in ways specific to the chemistry of the salt and BLO additives. In this way friction modifications may be provided by BLOs targeted to boundary layers via emulsions within lubricating fluids, wherein those lubricating fluids may be water-based or oil-based.

Methods and apparatus related to the detection of low-rate visible light communication (VLC) signals and the recovery of information communicated by the VLC signals are described. Various methods and apparatus are well suited for embodiments in which a device, e.g., a smartphone, including a camera which uses a rolling shutter. The rolling shutter facilitates the collection of different time snapshots of a received low rate time varying VLC signal with different pixel rows in the image sensor of a frame corresponding to different time snapshots. In some embodiments, demodulation is used to recover and identify a single tone being communicated in a frame from among a plurality of possible alternative tones that may be communicated, each different tone corresponding to a different set of information bits.

This invention concerns real-time multi-impairment signal performance monitoring. In particular it concerns an optical device, for instance a monolithic integrated photonics chip, comprising a waveguide having an input region to receive a signal for characterization, and a narrow band CW laser signal. A non-linear waveguide region to mix the two received signals. More than one output region, each equipped with bandpass filters that extract respective discrete frequency bands of the RF spectrum of the mixed signals. And, also comprising (slow) power detectors to output the extracted discrete frequency banded signals.