Aiming at the problem of aggravation of traffic congestion caused by unstable signal control of traffic signal control system, the Multi-Agent Deep Deterministic Policy Gradient-based Traffic Cyclic Signal (MADDPG-TCS) control algorithm is used to control the time and data dimensions of the signal control scheme. The results show that the maximum vehicle delay time and vehicle queue length of the proposed algorithm are 11.33 s and 27.18 m, which are lower than those of the traditional control methods. Therefore, this method can effectively reduce the delay of traffic signal control and improve the stability of signal control.

We propose that technological, service-dominant and design logics must interplay for an IT artefact to succeed. Based on data from a project aiming at a B2B platform for manufacturing small and medium enterprises (SMEs) in Europe, we explore these three logics in an agile software design context. By using an inductive approach, we theorise about what is needed for the alignment of the three logics. We contribute with a novel theoretical lens, the Framework for Adaptive Space. We offer insights into the importance of continuously reflecting on all three logics during the agile software design process to ensure mutual understanding among the agile team and the B2B platform end-users involved.

The intelligent financial sharing platform in the online realm is capable of collecting, storing, processing, analysing and sharing financial data through the integration of AI and big data processing technologies. However, as data volume grows exponentially, the cost of financial data storage and processing increases, and the asset accounting and financial profit data sharing analysis structure in financial sharing platforms is inadequate. To address the issue of data security sharing in the intelligent financial digital sharing platform, this paper proposes a data-sharing framework based on blockchain and edge computing. Building upon this framework, a non-separable task distribution algorithm based on data sharing is developed, which employs multiple nodes for cooperative data storage, reducing the pressure on the central server for data storage and solving the problem of non-separable task distribution. Multiple sets of comparative experiments confirm the proposed scheme has good feasibility in improving algorithm performance and reducing energy consumption and latency.

With the expansion of business scope, the environment faced by enterprises has also changed, and competition is becoming increasingly fierce. Traditional financial systems are increasingly difficult to handle complex tasks and predict potential financial risks. In the context of the digital economy era, the booming financial sharing services have reduced labour costs and improved operational efficiency. This paper designs and implements an intelligent financial sharing platform, establishes a fund payment risk early warning model based on an improved support vector machine algorithm, and tests it on the Financial Distress Prediction dataset. The experimental results show that the effectiveness of using F2 score and AUC evaluation methods can reach 0.9484 and 0.9023, respectively. After using this system, the average financial processing time per order decreases by 43%, and the overall financial processing time decreases by 27%. Finally, this paper discusses the role of intelligent financial sharing platform in accounting transformation and optimisation of production.

With the development of urban construction, its spatial evolution is also influenced by behavioural actors such as enterprises, residents, and environmental factors, leading to some decision-making behaviours that are not conducive to urban public space and environmental design. At the same time, some cities are vulnerable to various factors such as distance factors, transportation factors, and human psychological factors during the construction of public areas, resulting in a decline in the quality of urban human settlements. Urban public space is the guarantee of urban life. For this, in order to standardise urban public space and improve the quality of urban living environment, the standardisation of the environment of urban public space is required. The rapid development of intelligent algorithms and fuzzy control provides technical support for the environmental design of urban public spaces. Through the modelling of intelligent algorithms and the construction of fuzzy space, it can meet the diverse.

Intelligent digital virtual technology has become an indispensable part of modern construction, but there are also some problems in its practical application. Therefore, it is necessary to strengthen the design of intelligent building image processing systems from many aspects. Starting from image digital processing methods, this paper studies the digital twin virtual design scene construction method and related algorithms, converts the original image into a colour digital image through a greyscale algorithm, and then combines morphological knowledge and feature point extraction methods to complete the construction of a three-dimensional virtual environment. Finally, through the comparison of traditional image processing effects with smart building images based on digital twins and BIM technology, the results show that the optimised image processing results have higher clarity, sharper contrast, and a sensitivity increased by 5.84%, presenting better visual effects and solving the risk of misjudgement caused by inaccurate image recognition.

Physiological indicators are an important basis for reflecting the physiological health status of the human body and play an important role in medical practice. Association rules have also been one of the important research hotspots in recent years. This study aims to create a data mining system of association rules and artificial intelligence in biochemical indicators of sports training. This article uses Markov logic for network creation and system training, and tests whether the Markov logic network can be associated with the training system. The results show that the accuracy and recall rate obtained are about 90%, which shows that it is feasible to establish biochemical indicators of sports training based on Markov logic network, and the system has universal, guiding and constructive significance, ensuring that the construction of training system indicators will not go in the wrong direction.

The application of computer image digitisation has realised the transformation of people's production and lifestyle, and also promoted the development of the construction industry. This article aims to realise the research on architectural decoration design and production under computer network environment and promote the ecological development of indoor and outdoor design in the construction industry. This article proposes to use virtual reality technology in image digitisation to guide architectural decoration design research. In the comparative analysis of the weight of architectural decoration elements, among the calculated weights of secondary elements, the spatial function has the largest weight, which is 0.2155, and the landscape has the smallest weight, which is 0.0113. Among the three-level unit weights, the service area has the largest weight, which is 0.0976, and the fence frame has the smallest weight, which is 0.0119.

New web technologies have enabled online education to take on a massive scale, prompting many universities to create massively open online courses (MOOCs) that take advantage of these technologies in a seemingly effortless manner. Designing a MOOC, however, is anything but trivial. It involves developing content, learning activities, and assessments to accommodate both the massiveness and openness of the course. To design an effective MOOC, instructors need to integrate both pedagogical and information systems theory. In this paper, we present a case study of a MOOC grant and a series of decisions made in its development. These decisions, when paired with the theoretical framework, suggest five principles – meaningful, engaging, measurable, accessible, and scalable – may be applicable to future MOOC development projects.

Increasingly, numerous universities have identified benefits of flipped learning environments and have been encouraging instructors to adapt such methodologies in their respective classrooms, at a time when departments are facing significant budget constraints. This article proposes an instructional design framework utilized to strategically enhance traditional flipped methodologies in a first-year engineering course, by using low-cost technology aids and proven pedagogical techniques to enhance student learning. Implemented in a first-year engineering course, this modified flipped model demonstrated an improved student awareness of essential engineering concepts and improved academic performance through collaborative and active learning activities, including flipped learning methodologies, without the need for expensive, formal active learning spaces. These findings have been validated through two studies and have shown similar results confirming that student learning is improved by the implementation of multi-pedagogical strategies in-formed by the use of an instructional design in a traditional classroom setting.

This paper examines how to leverage the design studio learning environment throughout long-term Digital Design education in order to support students to progress from tactical, well-defined, device-centric routine design, to confidently design sustainable solutions for strategic, complex, problems for a wide range of devices and platforms in the digital space. We present a framework derived from literature on design, creativity, and theories on learning that: (a) implements a theory of formal learning sequences as a user-centered design process in the studio; and (b) describes design challenge progressions in the design studio environment modeled in seven dimensions. The framework can be used as a tool for designing, evaluating, and communicating course progressions within – and between series of – design studio courses. This approach is evaluated by implementing a formal learning sequence framework in a series of design studio courses that progress in an undergraduate design-oriented Informatics program. Reflections from students, teachers, and external clients indicate high student motivation and learning goal achievement, high teacher satisfaction and skill development, and high satisfaction among external clients.

Aim/Purpose: Improving public schools is a focus of federal legislation in the United States with much of the burden placed on principals. However, preparing principals for this task has proven elusive despite many changes in programming by institutions of higher learning. Emerging technologies that rely on augmented and virtual realities are posited to be powerful pedagogical tools for closing this gap. Background: This study investigated the effects of immersive simulation technologies on principals’ self-efficacy after treatment and the perceived significance of the design of the immersive simulation experience as an effective tool for adult learners. Methodology: The investigator employed a multiple-methods study that relied on a purposive sample of graduate students enrolled in educational leadership programs at two small universities in the southeastern United States. Participants completed a two-hour module of immersive simulation designed to facilitate transfer of knowledge to skills thereby increasing their self-efficacy. Contribution: This paper contributes to a small body of literature that examines the use of immersive simulation to prepare aspiring principals. Findings: The findings indicate moderate effect sizes in changes in self-efficacy, positive attitudes toward immersive simulation as a pedagogical tool, and significance in the design of immersive simulation modules. This suggests that immersive simulation, when properly designed, aids principals in taking action to improve schools. Recommendations for Practitioners: Educational leadership programs might consider the use of immersive simulations to enhance principals’ ability to meet the complex demands of leading in the 21st century. Impact on Society: Principals may be more adept at improving schools if preparation programs provided consistent opportunities to engage in immersive simulations. Future Research: Future research should be conducted with larger sample sizes and longitudinally to determine the effectiveness of this treatment.

Aim/Purpose: The dynamic nature of the information systems (IS) field presents educators with the perpetual challenge of keeping course offerings current and relevant. This paper describes the process at a College of Business (COB) to redesign the introductory IS course to better prepare students for advanced business classes and equip them with interdisciplinary knowledge and skills demanded in today’s workplace. Background: The course was previously in the Computer Science (CSC) Department, itself within the COB. However, an administrative restructuring resulted in the CSC department’s removal from the COB and left the core course in limbo. Methodology: This paper presents a case study using focus groups with students, faculty, and advisory council members to assess the value of the traditional introductory course. A survey was distributed to students after implementation of the newly developed course to assess the reception of the course. Contribution: This paper provides an outline of the decision-making process leading to the course redesign of the introductory IS course, including the context and the process of a new course development. Practical suggestions for implementing and teaching an introductory IS course in a business school are given. Findings: Focus group assessment revealed that stakeholders rated the existing introductory IS course of minimal value as students progressed through the COB program, and even less upon entering the workforce. The findings indicated a complete overhaul of the course was required. Recommendations for Practitioners: The subject of technology sometimes requires more than a simple update to the curriculum. When signs point to the need for a complete overhaul, this paper gives practical guidance supplemented with relevant literature for other academicians to follow. Recommendation for Researchers: Students are faced with increasing pressure to be proficient with the latest technology, in both the classroom where educators are trying to prepare them for the modern workplace, as well as the organization which faces an even greater pressure to leverage the latest technology. The newly designed introductory IS course provides students, and eventually organizations, a better measure of this proficiency. Future Research: Future research on the efficacy of this new course design should include longitudinal data to determine the impact on graduates, and eventually the assessment of those graduates’ performance in the workplace.

Aim/Purpose: This study reports the outcome of how a first pilot semester introductory programming course was designed to provide tangible evidence in support of the concept of Student Ownership of Learning (SOL) and how the outcomes of this programming course facilitate effective student learning. Background: Many instructors want to create or redesign their courses to strengthen the relationship between teaching and learning; however, the researchers of this study believe that the concept of Student Ownership of Learning (SOL) connects to student engagement and achievement in the classroom setting. The researchers redesigned the introductory programming course to include valuable teaching methods to increase Student Ownership of Learning and constructive approaches such as making students design an authentic mobile app project as individuals, partners, or within teams. The high quality of students’ projects positioned them as consultants to the university IT department. Methodology: This paper employs a case study design to construct a qualitative research method as it relates to the phenomenon of the study’s goals and lived experiences of students in the redesigned introductory programming course. The redesigned course was marketed to students as a new course with detailed description and elements that were different from the traditional computer science introductory programming course requirement. The redesigned introductory programming course was offered in two sections: one section with 14 registered students and the other section with 15 registered students. One faculty member instructed both sections of the course. A total of 29 students signed up for the newly redesigned introductory programming course, more than in previous semesters, but two students dropped out within the first two weeks of the redesigned course making a total of 27 students. The redesigned coursework was divided into two parts of the semester. The first part of the semester detailed description and elements of the coursework including a redesigned approach with preparation for class, a quiz, and doing homework in class, which gives students control of decisions whenever possible; and working with each other, either with a partner or in a team. The second part of the semester focuses on students designing a non-trivial working mobile app and presenting their developing mobile app at a significant public competition at the end of the semester. Students developed significantly complex mobile apps and incorporated more complex functionality in their apps. Both Management Information System (MIS) major students and Computer Science major students were in the same course despite the fact that MIS students had never taken a programming course before; however, the Computer Science students had taken at least one course of programming. Contribution: This study provides a practical guide for faculty members in Information Technology programs and other faculty members in non-Computer Science programs to create or redesign an introductory course that increases student engagement and achievement in the classroom based on the concept of Student Ownership of Learning (SOL). This study also deepens the discussion in curriculum and instruction on the value to explore issues that departments or programs should consider when establishing coursework or academic programs. Findings: This study found two goals evidently in support to increase Student Ownership of Learning (SOL). The first goal (Increase their ownership of learning SOL) showed that students found value in the course contents and took control of their learning; therefore, the faculty no longer had to point out how important different programming concepts were. The students recognized their own learning gap and were excited when shown a programming concept that addressed the gap. For example, student comments were met with “boy, we can really use this in our app” instead of comments about how complex they were. The coursework produced a desired outcome for students as they would get the knowledge needed to make the best app that they could. The second goal (Develop a positive attitude toward the course) showed positive results as students developed a more positive attitude towards the course. Student actions in the classroom strongly reflected a positive attitude. Attendance was almost 100% during the semester even though no points for attendance were given. Further evidence of Student Ownership of Learning and self-identity was students’ extensive use of the terminology and concept of the course when talking to others, especially during the public competition. Students were also incorporating their learning into their identities. For example, teams became known by their app such as the Game team, the Recipe team, and the Parking team. One team even made team t-shirts. Another exciting reflection of the Student Ownership of Learning which occurred was the learning students did by themselves. Recommendations for Practitioners: Practitioners can share best practices with faculty in different departments, programs, universities, and educational consultants to cultivate the best solution for Student Ownership of Learning based on student engagement and achievement in the classroom setting. Recommendation for Researchers: Researchers can explore different perspectives with scholars and practitioners in various disciplinary fields of study to create or redesign courses and programs to reflect Student Ownership of Learning (SOL). Impact on Society: Student Ownership of Learning is relevant for faculty and universities to incorporate in the creation or redesigning of coursework in academic programs. Readers can gain an understanding that student engagement and achievement are two important drivers of Student Ownership of Learning (SOL) in the classroom setting. Future Research: Practitioners and researchers could follow-up in the future with a study to provide more understanding and updated research information from different research samples and hypotheses on Student Ownership of Learning (SOL).

Aim/Purpose: Multi-threaded software design is considered to be difficult, especially to novice programmers. In this study, we explored how students cope with a task that its solution requires a multi-threaded architecture to achieve optimal runtime. Background: An efficient exploit of multicore processors architecture requires computer programs that use parallel programming techniques. However, parallel programming is difficult to understand and apply by novice programmers. Methodology: The students had to address a two-stage problem: (1) design an optimal runtime solution to a given problem with no additional instructions; and (2) provide an optimal runtime multi-threaded design to the same problem. Interviews were conducted with a representative group of students to understand the underlying causes of their provided designs. We used qualitative research methods to gain refined insights regarding the students’ decision making during the design process. To analyze the gained data, we used content analysis tools. Contribution: The case study presented in this paper will help the teacher to stress the merits and limitations of various parallel architectures and confront students with the consequences of their solutions via performances’ benchmark. Findings: Analysis of the student’s solutions to the first stage revealed that the majority of them did not provide a multi-threaded solution ignoring the optimal runtime requirement. At the second stage, seven various architectures were provided differing in the number of involved threads, the data structures used, and the synchronization mechanism employed. The majority of the solutions were sub-optimal and only a few students provided an optimal one. Recommendations for Practitioners: We recommend conducting class discussions that will follow a task similar to the one used in this study. Recommendation for Researchers: To be able to generalize the received results this research should be repeated with larger study participant groups from various academic institutions. Impact on Society: Understanding the difficulties of novice programmers may lead to quality software systems. Future Research: To be able to generalize the received results this research should be repeated with larger study participant groups from various academic institutions.

Aim/Purpose: In this paper, we present our experience in design and delivery of a graduate Information Systems Management (ISM) course in an online MBA program. Also presented are a detailed examination of the design and delivery of the online course, survey results of students’ perceptions and backgrounds, course evaluation results, best practices and lessons learned, and potential changes and future actions. Background: This graduate ISM course needs to not only cover a broad range of dynamic technology and business topics, but also strike a balance between the width and depth of the content. Effective course design and delivery are critical to improved teaching and learning, especially when the course is delivered online. Methodology: We provided a comprehensive review of the related literature to develop guidelines for the design and delivery of our ISM course; we collected survey data to evaluate the students’ backgrounds and their perceptions of the course; we used data analysis and content analysis methods to assess the course evaluation results. Contribution: A review of the related literature indicates that IS researchers and educators have not adequately studied online graduate education. Given the importance of the graduate ISM course in most MBA programs, and the lack of attention from the IS community, it is critical to address this gap in the research. We believe we have done so with this paper. Findings: The paper’s major findings are embedded in a detailed examination of the design and delivery of the online course, survey results of students’ perceptions and backgrounds, course evaluation results, best practices and lessons learned, and potential changes and future actions. Recommendations for Practitioners: Even though our experience may not be fully applicable to other institutions, we hope our IS colleagues can learn from the design and delivery of this online course, as well as our best practices and lessons learned to improve the teaching and learning effectiveness in IS online graduate education, in general. Furthermore, we provide instructors with an actionable framework onto which they can map their current course offering, and compare their current pedagogical offering to literature driven best practices for ISM courses, in particular. Recommendation for Researchers: It is our hope that the design and delivery of this online course, and our best practices and lessons learned can inspire our IS colleagues to search for innovative ways to improve the teaching and learning effectiveness in IS online graduate education. In addition, we distill a literature driven framework for ISM courses design and delivery that can help researchers frame their pedagogical research questions. Impact on Society: The online course in this study prepares students for more efficiently and effectively delivering IT systems in organizations. Many MBA students work for non-profits and other socially-focused organizations and are able to use the skills learned in the course for the betterment of society. Future Research: We will continue to monitor the impact of the changes on student learning effectiveness and attempt to identify additional innovative ways to improve the design and delivery of this online ISM course.

Aim/Purpose: This research aims to describe layering of career-like experiences over existing curriculum to improve perceived educational value. Background: Feedback from students and regional businesses showed a clear need to increase student’s exposure to career-like software development projects. The initial goal was to develop an instructor-optional project that could be used in a single mid-level programming course; however, the pilot quickly morphed into a multi-year study examining the feasibility of agile projects in a variety of settings. Methodology: Over the course of four years, an agile project was honed through repeated Design Based Research (DBR) cycles of design, implementation, testing, communication, and reflective analysis. As is common with DBR, this study did not follow single methodology design; instead, analysis of data coupled with review of literature led to exploration and testing of a variety of methodologies. The review phase of each cycle included examination of best practices and methodologies as determined by analysis of oral and written comments, weekly journals, instructor feedback, and surveys. As a result of participant feedback, the original project was expanded to a second project, which was tested in another Software Engineering (SE) course. The project included review and testing of many academic and professional methodologies, such as Student Ownership of Learning, Flipped Classroom, active learning, waterfall, agile, Scrum, and Kanban. The study was homogenous and quasi-experimental as the population consisted solely of software engineering majors taking required courses; as based on validity of homogenous studies, class sizes were small, ranging from 8 to 20 students. Close interactions between respondents and the instructor provided interview-like settings and immersive data capture in a natural environment. Further, the iterative development practices of DBR cycles, along with the inclusion of participants as active and valued stakeholders, was seen to align well with software development practitioner practices broadly known as agile. Contribution: This study is among the first to examine layering a career-like software development project on top of a course through alteration of traditional delivery, agile development, and without supplanting existing material. Findings: In response to industry recommendations for additional career-like experiences, a standalone agile capstone-like project was designed that could be layered over an existing course. Pilot data reflected positive perceptions of the project, although students did not have enough time to develop a working prototype in addition to completing existing course materials. Participant feedback led to simultaneous development of a second, similar project. DBR examination of both projects resulted in a simplified design and the ability to develop a working prototype, if and only if the instructor was willing to make adjustments to delivery. After four years, a solution was developed that is both stable and flexible. The solution met the original charge in that it required course delivery, not course material, to be adjusted. It is critical to note that when a working prototype is desired, a portion of the lecture should be flipped allowing more time for guided instruction through project-focused active learning and study group requirements. The results support agile for standalone software development projects, as long as passive delivery methods are correspondingly reduced. Recommendations for Practitioners: Based on the findings, implementation of a career-like software development project can be well received as long as active learning components are also developed. Multiple cycles of DBR are recommended if future researchers wish to customize instructional delivery and develop complex software development projects. Programming instructors are recommended to explore hybrid delivery to support development of agile career-like experiences. Small class sizes allowed the researchers to maintain an interview-like setting throughout the study and future studies with larger classes are recommended to include additional subject matter experts such as graduate students as interaction with a subject matter expert was highly valued by students. Recommendation for Researchers: Researchers are recommended to further examine career-like software development experiences that combine active learning with agile methods; more studies following agile and active learning are needed to address the challenges faced when complex software development is taught in academic settings. Further testing of standalone agile project development has now occurred in medium sized in person classes, online classes, independent studies, and creative works research settings; however, further research is needed. Future research should also examine the implementation of agile projects in larger class sizes. Increasing class size should be coupled with additional subject matter experts such as graduate students. Impact on Society: This study addresses professional recommendations for development of agile career-like experiences at the undergraduate level. This study provides empirical evidence of programming projects that can be layered over existing curriculum, with no additional cost to the students. Initial feedback from local businesses and graduates, regarding agile projects with active learning, has been positive. The area business that refused to hire our underprepared SE graduates has now hired several. Future Research: Future research should explore layering agile projects over a broader range of software development courses. Feedback from hiring professionals and former students has been positive. It is also recommended that DBR be used to develop career-like experiences for online programming courses.

Aim/Purpose: To explore the effectiveness of utilizing the design thinking approach in developing digital self-directed learning environment to enhance digital literacy skills in Thai higher education. Background: To foster digital literacy skills in higher education, Thai students require more than access to technology. Emphasizing digital self-directed learning and incorporating Design Thinking approach, can empower students to learn and develop their digital skills effectively. This study explores the impact of digital self-directed learning environment, developed using a design thinking approach, on enhancing digital literacy skills among higher education students in Thailand. Methodology: The research methodology involves developing a digital self-directed learning environment, collecting and analyzing data, and using statistical analysis to compare the outcomes between different groups. The sample includes 60 undergraduate students from the School of Industrial Education and Technology at King Mongkut Institute of Technology, divided into a control group (n=30) and an experimental group (n=30). Data analysis involves mean, standard deviation, and one-way MANOVA. Contribution: This research contributes to the evidence supporting the use of Design Thinking in developing digital self-directed learning environment, demonstrating its effectiveness in meeting learners’ needs and improving learning outcomes in higher education. Findings: Key findings include: 1) the digital media and self-directed learning activities plan developed through the design thinking approach received high-quality ratings from experts, with mean scores of 4.87 and 4.93, respectively; and 2) post-lesson comparisons of learning outcome and digital literacy assessment scores revealed that the group utilizing digital media with self-directed learning activities had significantly higher mean scores than the traditional learning group, with a significance level of 0.001. Recommendations for Practitioners: Practitioners in higher education should use design thinking to develop digital self-directed learning environments that enhance digital literacy skills. This approach involves creating high-quality digital media and activities, promoting engagement and improved outcomes. Collaboration and stakeholder involvement are essential for effective implementation. Recommendation for Researchers: Researchers should continue to explore the effectiveness of design thinking approaches in the development of learning environments, as well as their influence on different educational aspects such as student engagement, satisfaction, and overall learning outcomes. Impact on Society: By enhancing digital literacy skills among higher education students, this study contributes to the development of a digitally skilled workforce, encourages lifelong learning, and aids individuals in effectively navigating the challenges of the digital era. Future Research: Future research could explore a broader range of student demographics and educational settings to validate the effectiveness of the Design Thinking approach in enhancing digital literacy. This could include integrating design thinking with alternative digital learning and teaching methods to further improve digital literacy.

This study focuses on the importance of monitoring student attendance in education and the challenges faced by educators in doing so. Existing methods for attendance tracking have drawbacks, including high costs, long processing times, and inaccuracies, while security and privacy concerns have often been overlooked. To address these issues, the authors present a novel internet of things (IoT)-based self-lecture attendance system (SLAS) that leverages smartphones and QR codes. This system effectively addresses security and privacy concerns while providing streamlined attendance tracking. It offers several advantages such as compact size, affordability, scalability, and flexible features for teachers and students. Empirical research conducted in a live lecture setting demonstrates the efficacy and precision of the SLAS system. The authors believe that their system will be valuable for educational institutions aiming to streamline attendance tracking while ensuring security and privacy.