1 Peruvian Nuevo Sol = 0.1113 Bahraini Dinar

1 Dominican Peso = 0.4876 Ukrainian Hryvnia

1 Dominican Peso = 0.0069 Bahraini Dinar

1 Papua New Guinean Kina = 7.8237 Ukrainian Hryvnia

1 Papua New Guinean Kina = 0.1102 Bahraini Dinar

1 Brunei Dollar = 18.9903 Ukrainian Hryvnia

1 Brunei Dollar = 0.2676 Bahraini Dinar

Hi! 

In my design, there is an one hold violation on scan path, test data is corrupted during scan cycles (when i run verilog simulation of test vectors). I created constraint 'falsepath' to 'TI' input of violated flop and load it into Modus, but this does not have effect.

Can enyone explain to me, does 'falsepath' constraint affects scan path (from Q to TI/SI input, i.e. during SCAN procedure) or this constraint is only for functional mode (ie affects TEST cycle only - to 'D' input)?

I hope resolve this problem this by using some modus design constraints or any other method.

Dear all,

I am using Conformal Constraint Designer (Version 17.1) to analyse a SystemVerilog based design.

While performing default HDL checks it finds  some violations (issues) in RTL and complains (warnings, etc) about RTL checks and others.

My questions:

Is there any directive which I can add to RTL (system Verilog) so that particular line of code or signal is ignored or not checked for HDL or RTL checks.

I can set ignore rules in rule manager (gui) but it does not seems effective if code line number changes or new signals are introduced.

What is the best way to customize default_hdl_rules ?

I will be grateful for your guidance.

Thanks for your time.

I want to select a constraint, and then run a SKILL command that returns a list with the members of that constraint. Is this possible?

Thx,

Cadence continues to be a leader in SoC verification and has expanded our industry investment in Accellera portable stimulus language standardization. Some customers have expressed reservations that portable stimulus requires the effort of learn...(read more)

If I talk about my life, it was much simpler when I used to live with my parents. They took good care of whatever I wanted - in fact, they still do. But now, I am living alone, and sometimes I buy...

[[ Click on the title to access the full blog on the Cadence Community site. ]]

You must deal with many reports in your daily life – for your health, financial accounts, credit, your child’s academic records, and the count goes on. Ever noticed that these reports contain many details, most of which you don’t wa...(read more)

Imagine you are on a vacation with your family, and suddenly, your phone starts buzzing. You pick it up and what are you looking at is a bunch of pending, unanswered e-mails. You start recollecting the checklist you had made before taking off only to realize that you haven’t put on the automatic replies! (read more)

What is a Power Distribution Network (PDN) after all but resistance, inductance, and capacitance in the PCB and components? And, of course, it is there to deliver the right current and voltage to each component on your PCB. But is that all? Are there oth...(read more)

So, what if you can figure out all that can go wrong when your product is being assembled early on? Not guess but know and correct at an early stage – not wait for the fabricator or manufacturer to send you a long report of what needs to change. That’s why Design for Assembly (DFA) rules(read more)

Is anyone else using Constraint Manager within Capture? This is my first time using it. I'm finding that it is occasionally changing some of my constraint values in Allegro. It seems random. 

Hi, I am in the middle of a design and had no problem going back and forth between schematics and layout. Now I am getting the error message below. I am using Cadence 17.2.

ERROR: Layout database has probably been reverted to an earlier version than that, which was used in the latest flow or the schematic database was synchronized with another board.

The basecopy file generated by the last back-to-front flow not found.

ERROR: Layout database has probably been reverted to an earlier version than that, which was used in the latest flow or the schematic database was synchronized with another board.

The basecopy file generated by the last back-to-front flow not found.

Error: CMFBC-1: The schematic and the layout constraints were not synchronized as the changes done since the last sync up could not be reconciled. Syncing the current version of the schematic or layout databases with a previous version would result in this issue. The  constraint difference report is displayed.

Continuing with "changes-only" processing may result in incorrect constraint updates.

Thanks for your input

Claudia

When in Constraint Manager, Physical Domain, one can create a new Physical Constraint Class defining specific attributes for a custom rule set. One can then assing this new rule set to a set of nets. To do that it is instructed to create a new Net Class with menu Objects > Create > Net Class. Also on that same menu is available Net Group. Both options create a group that appear in the Constraint Manager Objects Name Column. I have triied both  options and cant really see the difference. 

The Question: What is the difference between creating a Net Class and a Net Group ?  What are the implications ?

Thanks for your help.

Hi,

I have a new customer that uses Allegro Design entry HDL for the schematic and have a few questions.

1. How do you get pin/gate swaps into the symbols in the schematic ?

2. How do you transfer them to the pcb editor ?

3. How do you back annotate the swaps from the pcb editor to the schematic ?

4. How do you stop the export/Import physical from updating the constraints in the pcb file ? 

Hi,

I am trying to characterize a D flip-flop for low voltage operation (0.6V) using Cadence Liberate (V16). This is a positive edge triggered D flip flop based on true-single-phase clocking scheme. After the characterization, the measurements reported for hold constraint arcs seem to deviate significantly from its (spectre) spice simulation.

The constraint and the power settings to the liberate are as follows : 

# -------------------------------------------- Timing Constraints --------------------------------------------------------------------------------
### Input waveform ###
set_var predriver_waveform 2;# 2=use pre-driver waveform
### Capacitance ###
set_var min_capacitance_for_outputs 1;# write min_capacitance attribute for output pins
### Timing ###
set_var force_condition 4
### Constraint ###
set_var constraint_info 2
#set_var constraint_search_time_abstol 1e-12 ;# 1ps resolution for bisection search
set_var nochange_mode 1 ;# enable nochange_* constraint characterization
### min_pulse_width ###
set_var conditional_mpw 0
set_var constraint_combinational 2

#---------------------------------------------- CCS Settings ----------------------------------------------------------------------------------------
set_var ccsn_include_passgate_attr 1
set_var ccsn_model_related_node_attr 1
set_var write_library_is_unbuffered 1

set_var ccsp_min_pts 15 ;# CCSP accuracy
set_var ccsp_rel_tol 0.01 ;# CCSP accuracy
set_var ccsp_table_reduction 0 ;# CCSP accuracy
set_var ccsp_tail_tol 0.02 ;# CCSP accuracy
set_var ccsp_related_pin_mode 2 ;# use 3 for multiple input switching scnarios and Voltus only libraries

#----------------------------------------------- Power ---------------------------------------------------------------------------------------------------
### Leakage ###
set_var max_leakage_vector [expr 2**10]
set_var leakage_float_internal_supply 0 ;# get worst case leakage for power switch cells when off
set_var reset_negative_leakage_power 1 ;# convert negative leakage current to 0

### Power ###
set_var voltage_map 1 ;# create pg_pin groups, related_power_pin / related_ground_pin
set_var pin_based_power 0 ;# 0=based on VDD only; 1=power based on VDD and VSS (default);
set_var power_combinational_include_output 0 ;# do not include output pins in when conditions for combinational cells

set_var force_default_group 1
set_default_group -criteria {power avg} ;# use average for default power group

#set_var power_subtract_leakage 4 ;# use 4 for cells with exhaustive leakage states.
set_var subtract_hidden_power 2 ;# 1=subtract hidden power for all cells
set_var subtract_hidden_power_use_default 3 ;# 3=subtract hidden power from matched when condition then default group
set_var power_multi_output_binning_mode 1 ;# binning for multi-output cell considered for both timing and power arcs
set_var power_minimize_switching 1
set_var max_hidden_vector [expr 2**10]
#--------------------------------------------------------------------------------------------------------------------------------------------------------------

I specifically used set_var constraint_combinational 2 in the settings, in case the Bisection pass/fail mode fails to capture the constraints. In my spice simulation, the hold_rise (D=1, CLK=R, Q=R) arc at-least requires ~250 ps for minimum CLK/D slew combination (for the  by default smallest capacitive load as per Liberate)  while Liberate reports only ~30 ps. The define_cell template to this flip flop is pretty generic, which does not have any user specified arcs. So which settings most likely affecting the constraint measurements in Liberate and how can I debug this issue ?

Thanks

Anuradha

Hi,

This question is related to the constraint measurement criteria used by the Liberate inside view. I am trying to characterize a specific D flip-flop for low voltage operation (0.6V) using Cadence Liberate (V16). 

When the "define_arcs" are not explicitly specified in the settings for the circuit (but the input/outputs are indeed correct in define_cell), the inside view seems to probe an internal node (i.e. master latch output)  for constraint measurements instead of the Q output of the flip flop. So to force the tool to probe Q output I added following coder in constraint arcs :

# constraint arcs from CK => D
define_arc
-type hold
-vector {RRx}
-related_pin CP
-pin D
-probe Q
DFFXXX

define_arc
-type hold
-vector {RFx}
-related_pin CP
-pin D
-probe Q
DFFXXX

define_arc
-type setup
-vector {RRx}
-related_pin CP
-pin D
-probe Q
DFFXXX

define_arc
-type setup
-vector {RFx}
-related_pin CP
-pin D
-probe Q
DFFXXX

with -probe Q liberate identifies Q as the output, but uses Glitch-Peak criteria instead of delay degradation method. So what could be the exact reason for this unintended behavior ? In my external (spectre) spice simulation, the Flip-Flop works well and it does not show any issues in the output delay degradation when the input sweeps.

Thanks

Anuradha

ટ્રેનમાં બેસીને વતન જવા માંગતા હતા આ શ્રમિકો, કોને ખબર હતી કે તે જ ટ્રેન તેમનો કાળ બનશે!

A recent report by the Energy Futures Initiative (EFI), established by former Energy Secretary Ernest Moniz, and the National Association of State Energy Officials confirms that the energy sector as a whole grew 2 percent last year, which is .3 percent more than the national job growth percentage of 1.7 percent.

Last week, Siemens and Case Western Reserve University (CWRU) announced a new new academic partnership that they say will provide students with the skills needed to operate and advance the nation’s energy grid.

With the potential for disaster at hydropower projects around the world, the lack of organized training programs becomes a prominent consideration in how companies manage their assets.

Venezuela's government is lifting electricity rationing that began more than two months ago due to drought and rising temperatures that affected water levels at the 1,500-square-mile Guri Reservoir.
 

The European Union is seeking to speed up the creation of a common energy market to help its shift to a low-carbon economy and boost security of energy supplies amid a natural-gas dispute between Russia and Ukraine.

IATEC 2020 is the biggest aviation training & education conference and exhibition in Indonesia, bringing together senior decision makers for this vital part of the industry.

The Department of Defense and two other government agencies have issued a proposed rule designed to help ensure that government contractors provide adequate privacy training to their staff members.

The US has elevated its ambassador to Belgium, former businessman Ronald J. Gidwitz, to the post of caretaker ambassador to the EU, it said Tuesday, adding he will "advance a strong US-EU partnership", help Europe in its economic recovery after the pandemic, and promote "our shared interests and values across the globe." The last US ambassador to the EU, businessman Gordon Sondland, left in disgrace over a Ukraine blackmail scandal.

Ukrainian officials say they’ve found a way to protect the nation from Russia: Go green.

Europe’s concern about its reliance on Russian fossil fuels may spur governments to prioritize alternative energy, the head of Neste Oil Oyj said.

The European Union is seeking to speed up the creation of a common energy market to help its shift to a low-carbon economy and boost security of energy supplies amid a natural-gas dispute between Russia and Ukraine.

Starting this month, NVIDIA’s Deep Learning Institute is offering instructor-led workshops that are delivered remotely via a virtual classroom. DLI provides hands-on training in AI, accelerated computing and accelerated data science to help developers, data scientists and other professionals solve their most challenging problems. These in-depth classes are taught by experts in their respective fields, Read article >

The post NVIDIA Deep Learning Institute Instructor-Led Training Now Available Remotely appeared first on The Official NVIDIA Blog.

Starting this month, NVIDIA’s Deep Learning Institute is offering instructor-led workshops that are delivered remotely via a virtual classroom. DLI provides hands-on training in AI, accelerated computing and accelerated data science to help developers, data scientists and other professionals solve their most challenging problems. These in-depth classes are taught by experts in their respective fields, Read article >

The post NVIDIA Deep Learning Institute Instructor-Led Training Now Available Remotely appeared first on The Official NVIDIA Blog.

Regulations to effect the transfer of virtually all private sewers and lateral drains to the water and sewerage companies have now been made, and will take effect on 1 July 2011. For the majority of installations, the transfer is planned to take eff...