The report further said the lockdowns have adversely affected the demand for chemicals and petrochemicals owing to decline in consumption and shutting down of manufacturing plants, supply chains and distribution networks.

Aldi grocery CEO Giles Huxley informed his suppliers that all products must come in 100% reusable, recyclable, or compostable packaing.

The post Aldi Heaps Pressure On Supplier Packaging Being 100% Recyclable or Compostable Within Five Years appeared first on Good News Network.

Many of America's national forests and grasslands—collectively called the National Forest System—face increased risks and alterations from escalating housing development on private rural lands along their boundaries. National forests and grasslands provide critical social, ecological, and economic benefits to the American public. This study projects future housing density increases on private rural lands at three distances—2, 3, and 10 miles—from the external boundaries of all national forests and grasslands across the conterminous United States. Some 21.7 million acres of rural private lands (about 8 percent of all private lands) located within 10 miles of the National Forest System boundaries are projected to undergo increases in housing density by 2030. Nine national forests are projected to experience increased housing density on at least 25 percent of adjacent private lands at one or more of the distances considered. Thirteen national forests and grasslands are each projected to have more than a half-million acres of adjacent private rural lands experience increased housing density. Such development and accompanying landscape fragmentation pose substantial challenges for the management and conservation of the ecosystem services and amenity resources of National Forest System lands, including access by the public. Research such as this can help planners, managers, and communities consider the impacts of local land use decisions.

Many of America's national forests and grasslands--collectively called the National Forest System--face increased risks and alterations from escalating housing development on private rural lands along their boundaries. National forests and grasslands provide critical social, ecological, and economic benefits to the American public. This study projects future housing density increases on private rural lands at three distances--2, 3, and 10 miles--from the external boundaries of all national forests and grasslands across the conterminous United States. Some 21.7 million acres of rural private lands (about 8 percent of all private lands) located within 10 miles of the National Forest System boundaries are projected to undergo increases in housing density by 2030. Nine national forests are projected to experience increased housing density on at least 25 percent of adjacent private lands at one or more of the distances considered. Thirteen national forests and grasslands are each projected to have more than a half-million acres of adjacent private rural lands experience increased housing density. Such development and accompanying landscape fragmentation pose substantial challenges for the management and conservation of the ecosystem services and amenity resources of National Forest System lands, including access by the public. Research such as this can help planners, managers, and communities consider the impacts of local land use decisions.

Over half (56 percent) of America's forests are privately owned and managed and provide a vast array of public goods and services, such as clean water, timber, wildlife habitat, and recreational opportunities. These important public benefits are being affected by increased housing density in urban as well as rural areas across the country.

Statement highlights: Oscillometric devices, which use an electronic pressure sensor within the blood pressure cuff, can reduce human error and the risk to the environment from older devices which use mercury. Patients who measure their blood pressure at home should use a device with an upper arm cuff that has been checked for accuracy by a healthcare provider.

DALLAS, March 31, 2020 — Many people have concerns about staying healthy during the COVID-19 pandemic. Those with a chronic condition such as high blood pressure — a reading above 130/80 — may face an increased risk for severe complications if they get...

Research Highlights: Most home blood pressure monitoring devices sold in Australia by global e-commerce sites such as Amazon and eBay have not been validated (tested for accuracy). Using an unvalidated device could lead to incorrect at-home blood...

Research Highlights: Teens who have obesity, type 2 diabetes or high systolic blood pressure show greater signs of blood vessel aging compared to healthy, normal weight teens. Thicker and stiffer blood vessels were more likely among teens that had...

Research Highlights: Minority stroke survivors experience better blood pressure control when lifestyle counseling by phone from a nurse is added to home blood pressure telemonitoring. Improved blood pressure control could lower strokes and stroke ...

Research Highlights: Middle-aged adults who walked the most steps-per-day had a 43% lower risk of diabetes and a 31% lower risk of high blood pressure, compared to people of similar age who accumulated the lowest number of daily steps. Among women, ...

Research Highlights: The PCORnet Blood Pressure Control Laboratory, a new collaborative partnership, analyzed electronic health record data from nearly 1.5 million patients including almost 6 million ambulatory visits with blood pressure measures. ...

U.S. Rep. Ken Buck, who is also the chairman of the Colorado Republican Party, was captured ordering a local party official to report false election results in a primary race for a state Senate seat in a leaked audio recording released earlier this week.

Hypertension is a potentially unsafe health ailment, which can be indicated directly from the Blood pressure (BP). Hypertension always leads to other health complications. Continuous monitoring of BP is very important; however, cuff-based BP measurements are discrete and uncomfortable to the user. To address this need, a cuff-less, continuous and a non-invasive BP measurement system is proposed using Photoplethysmogram (PPG) signal and demographic features using machine learning (ML) algorithms. PPG signals were acquired from 219 subjects, which undergo pre-processing and feature extraction steps. Time, frequency and time-frequency domain features were extracted from the PPG and their derivative signals. Feature selection techniques were used to reduce the computational complexity and to decrease the chance of over-fitting the ML algorithms. The features were then used to train and evaluate ML algorithms. The best regression models were selected for Systolic BP (SBP) and Diastolic BP (DBP) estimation individually. Gaussian Process Regression (GPR) along with ReliefF feature selection algorithm outperforms other algorithms in estimating SBP and DBP with a root-mean-square error (RMSE) of 6.74 and 3.59 respectively. This ML model can be implemented in hardware systems to continuously monitor BP and avoid any critical health conditions due to sudden changes.

Yesterday, Spokane Mayor Nadine Woodward and other local leaders urged Gov. Jay Inslee to allow Spokane County to open on a different schedule than the rest of the state.  Inslee, however, wouldn't budge.…

The present disclosure provides a method of providing an adhesive composition comprising the steps of combining crosslinkable composition including: a) a (meth)acryloyl monomer mixture with the b) photocrosslinking agent mixture, and irradiating with UVC radiation to polymerize and crosslink the composition.

A method for isolating 2,2,4,4-tetramethyl-1,3-cyclobutanediol (TMCD) solids from an isolated feed slurry formed in a TMCD process comprising TMCD, a liquid phase, and impurities by (a) treating the isolated feed slurry in a product isolation zone to produce an isolated TMCD product wet cake, a mother liquor, and impurities; wherein the product isolation zone can comprise at least one rotary pressure drum filter.

The present invention is directed to processes for the recovery of ethanol from a crude ethanol product obtained from the hydrogenation of acetic acid using a low energy process. The crude ethanol product is separated in one or more columns. At least one of the columns is operated at a controlled pressure to enhance separation of ethanol and organics. In one embodiment, there are at least two columns that operate at controlled pressures.

A method of producing arginine bicarbonate is provided including reacting an arginine slurry with a source of carbon dioxide gas under elevated temperature and low pressure to form a solution of at least 50% arginine bicarbonate, and recovering arginine bicarbonate from the solution.

Methods of producing arginine bicarbonate solutions in very high concentrations including reacting an arginine slurry containing a first portion of arginine with a source of carbon dioxide gas at elevated pressure and temperature, adding subsequent portions of arginine to the resulting solution and further reacting with compressed carbon dioxide until a final solution containing in excess of 50% by weight are provided which include preparing an arginine solution by subjecting an arginine water slurry to elevated pressure and temperature and reacting the arginine solution with a source of carbon dioxide gas to form a solution comprising arginine and bicarbonate anion and recovering arginine bicarbonate from the solution.

Disclosed is a method of preparing cationic starch. The method includes preparing a starch suspension containing a cationization agent; performing ultrahigh pressure treatment on the starch suspension; and obtaining cationic starch from the starch suspension subjected to ultrahigh pressure treatment.

The present invention has an object to measure lymphatic pressure with more safety and ease at lower cost. To achieve this, a lymphatic pressure-measuring system 1 includes: a manchette 11 fitted on a vital observation portion; a measurement unit 13 that measures and outputs pressure of the manchette 11; an infrared camera 21 that detects fluorescence emitted from fluorescent dye previously injected into a lymph vessel in the vital observation portion; and an image processing device 22 that generates and displays an image showing a position of the fluorescent dye in the lymph vessel based on a detection result of the infrared camera 21. The infrared camera 21 repeats the detection while the pressure of the manchette 11 decreases from first pressure to block a lymph flow in the vital observation portion to second pressure at restart of the lymph flow. The measurement unit 13 repeats the measurement during the period.

Provided is a pressure-sensitive adhesive for polarizing plates which can adhere a polarizing plate on a liquid crystal cell with good adhesion durability and has the characteristic that a liquid crystal display device obtained therefrom is less liable to cause light leakage even under the environment of high temperature and high humidity and which makes it possible remove the polarizing plate. The pressure-sensitive adhesive for polarizing plates is prepared by irradiating a pressure-sensitive adhesive material comprising (A) an acrylic base polymer having a weight average molecular weight of 1,000,000 or more comprising a monomer having a hydroxyl group in a monomer composition ratio of 10 mass % or less, (B) an acrylic base polymer having a weight average molecular weight of 1,000,000 or more comprising a monomer having a carboxyl group in a monomer composition ratio of 10 mass % or less and (C) an active energy beam-curable compound with an active energy beam, wherein a mass ratio of the component (A) to the component (B) is 100:1 to 100:50, and a storage elastic modulus (G') at 23° C. is 0.3 MPa or more.

Masking tapes that changes color when the tape is rubbed down or dispensed onto an adherend and methods of making such tapes are disclosed herein. The tape includes a backing, a layer of adhesive on the bottom surface of the backing, and a release structure on the top surface of the backing that includes a pressure-chromic indicator and a release layer. The pressure-chromic indicator is characterized in that it is not activated by the pressure applied during the manufacturing process, but is activated by the pressure applied when the tape is rubbed or dispensed onto an adherend.

A method is described for optimizing the operation of a reaction section for the synthesis of hydrocarbons from a feed comprising synthesis gas, operated in the presence of a catalyst comprising cobalt, said method comprising the following steps: a) determining the theoretical partial pressure of CO in the reaction section;b) optionally, adjusting the partial pressure of CO determined in step a) to a value of 4 bar or higher;c) determining a new value for the theoretical partial pressure of CO in the reaction section.

An external ear canal pressure regulation device including a fluid flow generator and an earpiece having a first axial earpiece conduit fluidicly coupled to the fluid flow generator, whereby the earpiece has a compliant earpiece external surface configured to sealably engage an external ear canal as a barrier between an external ear canal pressure and an ambient pressure.

Provided is a pressure vessel having a weld portion structure of a plate material in which a plate receiving a pressure or a load is attached by welding to a wall surface member such as a shell or a head. In the pressure vessel, a stress concentration on the weld portion structure is alleviated and an increase in welding amount and plate thickness of the wall surface member are suppressed. The pressure vessel includes a weld structure portion in which an end of a bolster plate (22) attached so as to partition an inside of a container body and receiving a pressure or a load is attached by welding to a wall surface member (30) of the container body, the weld structure portion having at least two sections including a weld portion (40), i.e., shape displacement points of the weld portion (40) and a stepped portion (50).

A combustor apparatus is provided, comprising a mixing arrangement for mixing a carbonaceous fuel with enriched oxygen and a working fluid to form a fuel mixture. A combustion chamber is at least partially defined by a porous perimetric transpiration member, at least partially surrounded by a pressure containment member. The combustion chamber has longitudinally spaced apart inlet and outlet portions. The fuel mixture is received by the inlet portion for combustion within the combustion chamber at a combustion temperature to form a combustion product. The combustion chamber directs the combustion product longitudinally toward the outlet portion. The transpiration member is configured to substantially uniformly direct a transpiration substance therethrough toward the combustion chamber, such that the transpiration substance is directed to flow helically about the perimeter and longitudinally between the inlet and outlet portions, for buffering interaction between the combustion product and the transpiration member. Associated systems are also provided.

The present disclosure relates to an improved device and methods for adapting to a laser diffraction apparatus used for measuring particle size distribution and density of the plume of a powder composition emitted from a dry powder inhaler.

Provided is an adhesive composition for a protective film including an acrylic emulsion resin capable of providing contamination resistance on the film and low peel strength and minimizing generation of static electricity during peeling of the protective film. The acrylic emulsion resin includes a mixture including 80 to 99.9% by weight of a polymer of a (meth)acrylic acid ester monomer including a C1-C14 alkyl group and a (meth)acrylic acid ester monomer including an alkylene oxide unit, and 0.1 to 20% by weight of a monomer including a carboxyl group and/or a hydroxyl group or a combination thereof, and 5 to 30 parts by weight of a reactive emulsifier having a double bond structure radical-polymerizable with the polymer and including an alkylene oxide unit based on 100 parts by weight of the mixture.

It is an object to ease discomfort feeling caused by ear fullness for passengers of an elevator. An air pressure control device 104 controls an air pressure in an elevator car 102 using an air pressure adjusting device 105 such as a blower, an air compressor, etc. In the air pressure control device 104, a departure/arrival control unit 121 largely changes the air pressure in the elevator car 102 in the first period which is a time zone at the time of departing from a departure floor (or at the time of arriving at an arrival floor), and an except departure/arrival control unit 122 slightly changes the air pressure in the elevator car 102 in the subsequent second period (or in a time period until arrival). By this 2-step air pressure control, the passenger is prompted to clear the ear in a short time T1, the ear fullness is resolved by the ear clearing, and thereafter, the passenger can ascend/descend with the elevator car 102 comfortably until arriving at the arrival floor.

A piezoresistive sensor device and a method for making a piezoresistive device are disclosed. The sensor device comprises a silicon wafer having piezoresistive elements and contacts in electrical communication with the elements. The sensor device further comprises a contact glass coupled to the silicon wafer and having apertures aligned with the contacts. The sensor device also comprises a non-conductive frit for mounting the contact glass to a header glass, and a conductive non-lead glass frit disposed in the apertures and in electrical communication with the contacts. The method for making a piezoresistive sensor device, comprises bonding a contact glass to a silicon wafer such that apertures in the glass line up with contacts on the wafer, and filling the apertures with a non-lead glass frit such that the frit is in electrical communication with the contacts. The use of a lead free glass frit prevents catastrophic failure of the piezoresistive sensor and associated transducer in ultra high temperature applications.

An elastomeric particle (1, 1, 1″) comprises a non-conducting elastomeric body (2) having an electrically conducting surface (4a, 4b, 6). Pressure sensor elements (20, 20', 20″; 30, 30', 30″, 30'″) comprising such elastomeric particles are disclosed, as well as sensor clusters (50″, 50'″, 50IV, 50V, 50VI, 50VII, 70) comprising such sensor elements. There is also disclosed a pressure sensor element (40, 40', 40″, 40'″, 40IV, 40V, 40VI, 40VII), comprising a resistive element (44, 44', 44″) providing a conduction path, a first electrode (42a, 42a-1, 42a-2, 42a-3, 42a-4, 42a-5, 42a-6), connected to the resistive element, a second electrode (42b, 42b'), which in a quiescent state is spaced from said first electrode, wherein the second electrode, when the pressure sensor element is subjected to a pressure, is arranged to contact said first electrode or said resistive element. Systems comprising such sensor elements and sensor clusters are disclosed, as well as methods of their fabrication.

In some aspects, a master cylinder assembly for vertical lift aircraft is configured to move pressurized fluid through a conduit in response to applied movement of an input lever. A low pressure relief valve can be connected to a first conduit to limit pressure to a low level. An isolation valve can be connected to the first conduit and configured to isolate the low pressure relief valve from the conduit when engaged. A high pressure relief valve can be connected to a second fluid conduit to limit pressure to a high level. In some aspects, a rotor brake actuator is fluidly connected to the first conduit and the second conduit and configured to engage a rotor brake in response to hydraulic fluid pressure.

A pressure control reservoir includes a valve ball and a shaft which is movable to move the valve ball to open or close a fluid path leading to a fluid reservoir chamber. The shaft has a tip with a slant surface which has a peripheral edge of a polygonal shape with even numbers of vertices and is inclined to the longitudinal center line of the shaft. Such a polygonal geometry increases an entire or inclined length of the slant surface, which results in an increased range where an angle which the slant surface makes with a plane extending perpendicular to an axial direction of the tip is permitted to be increased without causing the point of contact between the valve ball and the slant surface to be shifted close to the tip of the slant surface when the tip of the shaft moves the valve ball.

A pressure control valve arrangement for controlling a fluid pressure in an ABS brake system of a vehicle so that, while there is a tendency of individual wheels of the vehicle to lock, the brake pressure in at least one associated brake cylinder can be adaptively adjusted, including: a housing; and at least one diaphragm valve is accommodated in the housing, the diaphragm valve having a diaphragm as the valve body, which diaphragm can be acted upon by introducing pressure medium into a control chamber that is covered on the outside of the housing by a cover so that the control chamber is formed between the diaphragm and the cover, wherein at least one pressure medium channel carrying pressure medium is formed in the housing in the region of the cover, wherein at least one cover has at least one projection projecting into the pressure medium channel in the housing, a pressure medium guiding surface for directing the flow of the pressure medium carried in the pressure medium channel being formed on the projection.

Disclosed is a method for producing Alkyllithium compounds by reacting metallic lithium with an Alkyl halide in a solvent. The reaction is performed at a reduced pressure at the boiling point of the solvent.

A compressor for compressing refrigerant in a refrigerant circuit includes a housing defining a compression chamber. A screw rotor is mounted within the housing and configured to form a pocket of high pressure refrigerant and a pocket of low pressure refrigerant within the compression chamber. The screw rotor has a rotor shaft rotating about an axis. A bearing cavity includes at least one bearing rotatably supporting the rotor shaft. A partition through which the rotor shaft extends separates the bearing cavity from the compression chamber. A contacting seal is sealingly engaged with the rotor shaft and disposed in the bearing cavity proximate the partition. A passage has an opening adjacent the rotor shaft between the contacting seal and the compression chamber and in fluid communication with the pocket of low pressure refrigerant.

Pressure relief/drainage valve for a concrete pumper having a valve body with an axially extending passageway through which concrete flowing in a pumping line passes, an outlet port in a side wall of the passageway, and a valve member which prevents concrete from passing through the port when the valve is a closed position and permits concrete to discharge through the outlet port when the valve is in an open position.

A pick-and-place vacuum nozzle including a a nozzle body, a vacuum chamber within the nozzle body, a cavity formed in a lower surface of the nozzle body below the vacuum chamber, wherein the cavity is shaped to hold a head gimbal assembly, a back pressure relief hole passing through the nozzle body and connected to the vacuum chamber, the back pressure relief hole communicating with an exterior of the nozzle body, wherein a diameter of the back pressure relief hole is between 0.5 mm and 1 mm. The backpressure relief hole prevents light parts from sticking to the nozzle tip after vacuum is no longer applied.

A pressurized water reactor (PWR) includes a vertical cylindrical pressure vessel having a lower portion containing a nuclear reactor core and a vessel head defining an internal pressurizer. A reactor coolant pump (RCP) mounted on the vessel head includes an impeller inside the pressure vessel, a pump motor outside the pressure vessel, and a vertical drive shaft connecting the motor and impeller. The drive shaft does not pass through the internal pressurizer. A central riser may be disposed concentrically inside the pressure vessel, and the RCP impels primary coolant downward into a downcomer annulus between the central ser and the pressure vessel. A steam generator may be disposed in the downcomer annulus and spaced apart from with the impeller by an outlet plenum, A manway may access the outlet plenum so tube plugging can be performed on the steam generator via access through the manway without removing the RCP.

Systems, methods and apparatus are provided through which in some implementations an expandable or adjustable snap-in cam or other friction device having a mechanically lockable drawer, shelf or divider in a cabinet, pantry, kitchen cupboard mount includes no screws or other permanent mounting.

A machine permits an end of a thick-walled, high-pressure tubing to be chucked in a collet one time, coned, faced and threaded, using a coning head and threading head which are mounted on a carriage which can be translated laterally between three positions and the coning and threading heads parallel to the longitudinal axis of the workpiece to complete the coning and threading operations.

PCT No. PCT/DE96/01067 Sec. 371 Date Jun. 17, 1998 Sec. 102(e) Date Jun. 17, 1998 PCT Filed Jun. 17, 1996 PCT Pub. No. WO97/16777 PCT Pub. Date May 9, 1997For regulating the pressure in a pressure chamber, in particular in a pneumatic brake apparatus for a web-type recording medium, an actual pressure is set in the pressure chamber dependent on an actual angle of rotation of a rotary valve. The actual angle of rotation of the rotary valve and the actual pressure in the pressure chamber are acquired. A target pressure and a target angle of rotation allocated to this target pressure are predetermined, and a pressure deviation between the actual pressure and the target pressure are determined, as is a deviation of the angle of rotation between the actual angle of rotation and the target angle of rotation. An adjusting unit sets the angle of rotation at the rotary valve, first dependent on the deviation of the angle of rotation and then dependent on the pressure deviation. Furthermore, a sensor for acquiring the angle of rotation is specified.

A 5-wire touch screen system includes a touch screen (10) including a wiper (11) and a resistive layer (16) aligned with the wiper and first (UL), second (UR), third (LR), and fourth (LL) resistive layer contacts, wherein a touch on the screen presses a small portion of the wiper against the resistive layer, producing a touch resistance (RZ) between them at a touch point on the resistive layer. The wiper and various contacts are selectively coupled to first (VDD) and second (GND) reference voltages, respectively, to generate an analog touch voltage (VZ) at the touch point. The wiper and various contacts are selectively coupled to an analog input (56) and a reference voltage input of an ADC (48) for converting the touch voltage (VZ) to a digital representation. Analog voltages (VX) and (VY) at the touch point are converted to corresponding digital representations by the ADC.

This invention is directed to a system that generates a sufficient level of electricity through access to a municipal water supply line to run a furnace during below freezing temperatures. The system includes an inlet that draws water from a water supply line. A first conduit, in communication with the inlet, transports the water into a DC generator that includes an impeller to generate electricity. Water is then routed through a second conduit which then returns the water to the water supply line through an outlet. A solenoid valve may be positioned between the inlet and first conduit which remains closed when the electric grid runs normally but will open during a power outage to supply water to the DC generator. A lithium battery stores power created by the DC generator, which may include a voltage regulator and inverter to convert to DC.

A pressing device for a current collector moves a contact shoe unit is movable relative to a current rail. The pressing device includes a rocker unit and a spring unit. The spring unit having a helical spring rotatably biasing rocker unit is rotatable such that the contact shoe unit is movable into a sliding contact position in only one direction spring unit.

A fluid heating system for heating and dispensing fluid in a primary fluid flow path is disclosed, and may include a reservoir defining an interior for holding a quantity of a fluid, with the interior being in fluid communication with the primary fluid flow path such that the quantity of fluid in the interior is able to flow into the primary fluid flow path. A primary pump may be configured to pump fluid in the primary fluid flow path, the primary pump being in fluid communication with the primary fluid flow path. A fluid dispensing device may be configured to selectively dispense fluid from the primary fluid flow path. A steam injection apparatus may be in communication with the interior of the reservoir device to inject steam into the interior to heat fluid located in the interior of the reservoir.

A system for storing, rotating and feeding a high pressure hose. A first portion of the hose is disposable about the drum and a guide arm engages a second portion of the hose. An actuator assembly rotates a cage and the guide arm so that the guide arm rotates relative to the cage such that the hose is rotated. Relative rotation in one direction causes the first portion of the hose to uncoil from the drum and displace along the guide arm and causes a third portion of the high pressure hose in an output port to displace out of the output port away from the guide arm. Relative rotation in an opposite direction causes the second portion of the high pressure hose to coil about the drum and causes the third portion of the high pressure hose to displace into the housing.

A ripping mechanism for a vehicle has a support frame. A ripping member has an engagement head that is configured for plowing a groove in the ground. The ripping member is preferably positionable in a selected working position and working orientation by adjustment of the support frame. The ripping member is preferably movable relative to the support frame to cause reciprocating movement of the engagement head at least partially longitudinally. A tilt adjustment cylinder is preferably operable to orient the ripping member in the selected orientation. A vibrator mechanism is preferably operatively connected to the ripping member and activatable to cause reciprocating movement of the engagement head at least partially longitudinally.