The NNN master lease carries a cap rate of 7.25% with a remaining term of 17 years and 6 months

GRAFEX® SUPER FULLERENE

Staffing Properties is the concierge solution to help those in need curate and assemble a top performing arsenal staff at a reasonable price.

‘Industry leaders would benefit from both the demand revival as well as consolidation.’

We develop a distributional framework for the shearlet transform $mathcal{S}_{psi}colonmathcal{S}_0(mathbb{R}^2) omathcal{S}(mathbb{S})$ and the shearlet synthesis operator $mathcal{S}^t_{psi}colonmathcal{S}(mathbb{S}) omathcal{S}_0(mathbb{R}^2)$, where $mathcal{S}_0(mathbb{R}^2)$ is the Lizorkin test function space and $mathcal{S}(mathbb{S})$ is the space of highly localized test functions on the standard shearlet group $mathbb{S}$. These spaces and their duals $mathcal{S}_0^prime (mathbb R^2),, mathcal{S}^prime (mathbb{S})$ are called Lizorkin type spaces of test functions and distributions. We analyze the continuity properties of these transforms when the admissible vector $psi$ belongs to $mathcal{S}_0(mathbb{R}^2)$. Then, we define the shearlet transform and the shearlet synthesis operator of Lizorkin type distributions as transpose mappings of the shearlet synthesis operator and the shearlet transform, respectively. They yield continuous mappings from $mathcal{S}_0^prime (mathbb R^2)$ to $mathcal{S}^prime (mathbb{S})$ and from $mathcal{S}^prime (mathbb S)$ to $mathcal{S}_0^prime (mathbb{R}^2)$. Furthermore, we show the consistency of our definition with the shearlet transform defined by direct evaluation of a distribution on the shearlets. The same can be done for the shearlet synthesis operator. Finally, we give a reconstruction formula for Lizorkin type distributions, from which follows that the action of such generalized functions can be written as an absolutely convergent integral over the standard shearlet group.

The connection between visual input and tactile sensing is critical for object manipulation tasks such as grasping and pushing. In this work, we introduce the challenging task of estimating a set of tactile physical properties from visual information. We aim to build a model that learns the complex mapping between visual information and tactile physical properties. We construct a first of its kind image-tactile dataset with over 400 multiview image sequences and the corresponding tactile properties. A total of fifteen tactile physical properties across categories including friction, compliance, adhesion, texture, and thermal conductance are measured and then estimated by our models. We develop a cross-modal framework comprised of an adversarial objective and a novel visuo-tactile joint classification loss. Additionally, we develop a neural architecture search framework capable of selecting optimal combinations of viewing angles for estimating a given physical property.

We consider a fair division setting where indivisible items are allocated to agents. Each agent in the setting has strictly negative, zero or strictly positive utility for each item. We, thus, make a distinction between items that are good for some agents and bad for other agents (i.e. mixed), good for everyone (i.e. goods) or bad for everyone (i.e. bads). For this model, we study axiomatic concepts of allocations such as jealousy-freeness up to one item, envy-freeness up to one item and Pareto-optimality. We obtain many new possibility and impossibility results in regard to combinations of these properties. We also investigate new computational tasks related to such combinations. Thus, we advance the state-of-the-art in fair division of mixed manna.

We present a sound and complete method for the verification of qualitative liveness properties of replicated systems under stochastic scheduling. These are systems consisting of a finite-state program, executed by an unknown number of indistinguishable agents, where the next agent to make a move is determined by the result of a random experiment. We show that if a property of such a system holds, then there is always a witness in the shape of a Presburger stage graph: a finite graph whose nodes are Presburger-definable sets of configurations. Due to the high complexity of the verification problem (non-elementary), we introduce an incomplete procedure for the construction of Presburger stage graphs, and implement it on top of an SMT solver. The procedure makes extensive use of the theory of well-quasi-orders, and of the structural theory of Petri nets and vector addition systems. We apply our results to a set of benchmarks, in particular to a large collection of population protocols, a model of distributed computation extensively studied by the distributed computing community.

We study the specification and verification of hyperproperties for probabilistic systems represented as Markov decision processes (MDPs). Hyperproperties are system properties that describe the correctness of a system as a relation between multiple executions. Hyperproperties generalize trace properties and include information-flow security requirements, like noninterference, as well as requirements like symmetry, partial observation, robustness, and fault tolerance. We introduce the temporal logic PHL, which extends classic probabilistic logics with quantification over schedulers and traces. PHL can express a wide range of hyperproperties for probabilistic systems, including both classical applications, such as differential privacy, and novel applications in areas such as robotics and planning. While the model checking problem for PHL is in general undecidable, we provide methods both for proving and for refuting a class of probabilistic hyperproperties for MDPs.

The de Bruijn graph, its sequences, and their various generalizations, have found many applications in information theory, including many new ones in the last decade. In this paper, motivated by a coding problem for emerging memory technologies, a set of sequences which generalize sequences in the de Bruijn graph are defined. These sequences can be also defined and viewed as constrained sequences. Hence, they will be called constrained de Bruijn sequences and a set of such sequences will be called a constrained de Bruijn code. Several properties and alternative definitions for such codes are examined and they are analyzed as generalized sequences in the de Bruijn graph (and its generalization) and as constrained sequences. Various enumeration techniques are used to compute the total number of sequences for any given set of parameters. A construction method of such codes from the theory of shift-register sequences is proposed. Finally, we show how these constrained de Bruijn sequences and codes can be applied in constructions of codes for correcting synchronization errors in the $ell$-symbol read channel and in the racetrack memory channel. For this purpose, these codes are superior in their size on previously known codes.

An intracorporeal marker, for marking a site within living tissue of a host, includes an outer body portion of biodegradable material. An inner body portion is located in the outer body portion. The inner body portion includes biological material that becomes calcified in the living tissue of the host over time. An agent interacts with the biological material to promote calcification of the biological material of the inner body portion in the living tissue of the host.

Methods are disclosed for synthesizing nanocomposite materials including ferromagnetic nanoparticles with polymer shells formed by controlled surface polymerization. The polymer shells prevent the nanoparticles from forming agglomerates and preserve the size dispersion of the nanoparticles. The nanocomposite particles can be further networked in suitable polymer hosts to tune mechanical, optical, and thermal properties of the final composite polymer system. An exemplary method includes forming a polymer shell on a nanoparticle surface by adding molecules of at least one monomer and optionally of at least one tethering agent to the nanoparticles, and then exposing to electromagnetic radiation at a wavelength selected to induce bonding between the nanoparticle and the molecules, to form a polymer shell bonded to the particle and optionally to a polymer host matrix. The nanocomposite materials can be used in various magneto-optic applications.

The invention provides a lubricant composition containing (A) an ionic liquid having an anion represented by formula 1: (Rf1-SO2) (Rf2-SO2) N− or formula 2: (Rf3) (Rf3) (Rf3) PF3− wherein Rf1 and Rf2 in formula 1 may be the same or different and are each F, CF3, C2F5, C3F7 or C4F9, and Rf3 in formula 2 may be the same or different and is CF3, C2F5, C3F7 or C4F9; and (B) a fatty acid amine salt in an amount of 0.1 to 5.0 mass %. The lubricant composition of the invention can favorably be used under a high vacuum or an ultra high vacuum, or under high temperatures, and exhibits excellent rust prevention properties.

A molecule possessing a primary or secondary amino group and an additional functionality capable of providing a novel or improved property to a cellulose material has been permanently attached to the cellulose material in aqueous media using a water-soluble carbodiimide as the coupling agent/activator. One such molecule is 5-aminofluorescein (abbreviated as “A-fluo”) and one such cellulose material is a papermaking pulp. Papers made from a pulp furnish containing, for example, 0.01 wt. % of the “A-fluo”-attached pulp show an embedded marker feature authenticable upon UV or visible light excitation. The “A-fluo”-attached pulp can also be used for the marking and identification of a pulp furnish.

It is an object of the present invention to provide antimicrobial metallodrugs comprising an antimicrobial peptide (“AMP”) and/or an antibiotic covalently bound to a metal binding moiety. These metallodrugs combine a metal binding domain which typically catalyzes oxido-reductase chemistry or acts as a Lewis-Acid catalyst, with a member of a diverse class of antimicrobial agents currently validated in preclinical and clinical settings for the treatment of a broad spectrum of pathogenic organisms.

The invention relates to a glass item, at least one of the surfaces thereof having antimicrobial properties that are resistant to a temperature treatment, especially a temperature treatment in preparation of the subsequent tempering thereof. The glass item especially comprises an antimicrobial agent beneath the surface of the glass, and nanoparticles that are partially and/or totally incorporated into the mass of the glass close to said surface and consist of at least one inorganic component.

Described is a technology by which access to a resource is determined by evaluating a resource label of the resource against a user claim of an access request, according to policy decoupled from the resource. The resource may be a file, and the resource label may be obtained by classifying the file into classification properties, such that a change to the file may change its resource label, thereby changing which users have access to the file. The resource label-based access evaluation may be logically combined with a conventional ACL-based access evaluation to determine whether to grant or deny access to the resource.

The subject matter of the present disclosure is directed to developing a method of measuring the amount of producible oil and the producible oil saturation in shale-oil reservoirs using sample source rock. Further, the physical and chemical properties and amounts of producible oil in shale-oil reservoir samples may be determined. First and second solvents are applied to a sample source rock to extract petroleum from the sample source rock. The extracted source rock, the twice-extracted source rock, and the first and second extracted petroleum may be analyzed to determine the characteristics and properties of the reservoir rock.

The present invention provides protein hydrolysate compositions, processes for making protein hydrolysate compositions, and food products comprising protein hydrolysate compositions. The protein hydrolysate compositions generally comprise polypeptide fragments having primarily either an arginine residue or a lysine residue at each carboxyl terminus.

Provided are a bake hardening steel having a crystalline grain size of ASTM No. 9 or more and a method for preparing the bake hardening steel by controlling the winding, rolling and cooling conditions. The bake hardening steel includes: C:0.0016˜0.0025%, Si:0.02% or less, P:0.01˜0.05%, S:0.01% or less, sol.Al:0.08˜0.12%, N:0.0025% or less, Ti:0.003% or less, Nb:0.003˜0.011%, Mo:0.01˜0.1%, B:0.0005˜0.0015% or less, balance Fe and other inevitable impurities, wherein % is weight %, and Mn and P satisfy the relation of −30(° C.)≧803P−24.4Mn−58.

Provided are a method for post-treatment of a carbonaceous material using dehydrocyclization, a carbonaceous material post-treated by the method, and a polymer composite material including the carbonaceous material. More particularly, provided are a method for post-treatment of a carbonaceous material using dehydrocyclization, including subjecting the carbonaceous material to dehydrocyclization at room temperature to heal structural defects in the carbonaceous material, while increasing the effective conjugated length of the carbonaceous material to improve the electrical conductivity thereof, as well as a carbonaceous material post-treated by the method and a polymer composite material including the carbonaceous material.

A drill bit assembly for measuring reservoir formation properties comprises a bit head and a pin body, and an electrically insulated gap joint between two conductive parts of the drill bit assembly. The bit head has a cutting end and an opposite connecting end with an engagement section. The pin body comprises a connecting end with an engagement section. The pin connecting end is connected to the bit head connecting end such that the engagement sections overlap. The electrically insulating gap joint can fill a gap between the bit head and pin body engagement sections such that the bit head and pin body are mechanically connected together at the connecting ends but electrically separated. Alternatively or additionally, the pin body can have two pieces which are separated by an electrically insulating gap joint. An electrical conductor is electrically connected at a first end to the bit head and is communicable at a second end with an alternating current signal to transmit an alternating current into the bit head, thereby inducing an electric current into a reservoir formation adjacent the bit head. Electronic equipment includes measurement circuitry configured to determine the alternating current at the bit head, the alternating current being inversely proportional to a bit resistivity of the formation.

According to an embodiment, a drilling fluid comprises: water and a set accelerator, wherein the drilling fluid has a 10 minute gel strength of less than 20 lb*ft/100 sq ft, wherein the drilling fluid has a density in the range of about 9 to about 14 pounds per gallon, wherein the drilling fluid remains pourable for at least 5 days, and wherein when at least one part of the drilling fluid mixes with three parts of a cement composition consisting of water and cement, the drilling fluid cement composition mixture develops a compressive strength of at least 1,200 psi. According to another embodiment, a method of using the drilling fluid comprises the steps of: introducing the drilling fluid into at least a portion of a subterranean formation, wherein at least a portion of the drilling fluid is capable of mixing with a cement composition.

Embodiments of the present invention generally provide chamber components with enhanced thermal properties and methods of enhancing thermal properties of chamber components including bonding materials. One embodiment of the present invention provides a method for fabricating a composite structure. The method includes applying a bonding material to a first component, and converting the bonding material applied to the first component to an enhanced bonding layer by heating the bonding material to outgas volatile species from the bonding material. The outgassed volatile species accumulates to at least 0.05% in mass of the bonding material. The method further includes contacting a second component and the enhanced bonding layer to join the first and second components.

Additives may be used to lower the set up point for bitumen thereby allowing it to be transported from place to place more easily. Additives useful for lowering the set up point of bitumen include alkylphenol formaldehyde resins and oxyalkylated alkylphenol formaldehyde resins; amines and esters; solvents; and combinations thereof.

A method for manufacturing a sheet of paper and/or board having improved retention and drainage properties is provided, according to which, before the formation of the sheet and/or board, at least two retention aids are added to the fibrous suspension. These two retention aids are a main retention aid corresponding to a (co)polymer having a cationic charge density above 2 meq/g, obtained by the Hofmann degradation reaction, and a secondary retention aid corresponding to a water-soluble or water-swellable polymer having an anionic charge density above 0.1 meq/g. The main retention aid is introduced into the fibrous suspension in a proportion of 100 to 800 g/t of dry pulp, and the secondary retention aid is introduced into the fibrous suspension in a proportion of 50 to 800 g/t of dry pulp and has an intrinsic viscosity IV above 3 dl/g.

A web product having at least two plies is disclosed. One of the at least two plies has a continuous pillow area disposed upon a surface thereof. A first portion of the continuous pillow area has a first width, W1, and a length, L1, and a second portion of the continuous pillow area in contacting engagement and in fluid communication with the first portion has a second width, W2, and a length, L2, wherein, W1≠W2 and L1=L2. The web product has a Basis Weight, BW, value greater than 51.6 gsm and a Dry Bulk, DB, value greater than 15.5 cc/g.

A web product having a machine direction and a cross-machine direction orthogonal thereto is disclosed. The web product has at least one ply having a first plurality of pillow regions having a first total area in the machine and cross-machine directions and a second plurality of pillow regions having a second total area in the machine and cross-machine directions where the first and second total areas have a different value. The web product has a Dry Bulk, DB, value greater than 15.5 cc/g and a Total Tensile Strength, TT, value greater than 2000 g/25.4 mm.

A component composition contains, by % by mass, 0.0016 to 0.01% of C, 0.05 to 0.60% of Mn, and 0.020 to 0.080% of Nb so that the C and Nb contents satisfy the expression, 0.4≦(Nb/C)×(12/93)≦2.5. In addition, the amount of Nb-based precipitates is 20 to 500 ppm by mass, the average grain diameter of the Nb-based precipitates is 10 to 100 nm, and the average crystal grain diameter of ferrite is 6 to 10 μm. Nb is added to ultra-low-carbon steel used as a base, and the amount and grain diameter of the Nb-based precipitates are controlled to optimize the pinning effect. Grain refinement of ferrite is achieved by specifying the Mn amount, thereby achieving softening and excellent resistance to surface roughness of steel.

This disclosure describes a simple, low cost method to produce a modular dry mix that can easily be modified and customized to produce a wide range of easy to aerate, no ice cream machine needed, ice cream and frozen dairy and non-dairy desserts and products made by this process. The method relies on successive simultaneous particle size reduction and blending steps without the use of traditional mix drying operations. The formulations produced by this process are modular and allow quick and simple ingredient substitutions to create distinct finished products. The process yields mixes that produce stronger, more stable foams that don't leave an oily mouth feel. The disclosure also includes a formulation and process used to make ice cream, and related frozen dairy and non-dairy desserts at room temperature in one step where the ingredients do not need to be aged, or homogenized, and aeration occurs without the need for simultaneous cooling or freezing. The process allows the end-user to control and vary the texture, freezing rate, melting point and eating qualities of the product without the use of traditional, home or industrial ice cream machines and a product made by this process. A product produced from this mix consists of a (protein-concentrate and emulsifier)—stabilized, protein-based foam created by combining a powder mix with one or a combination of a large range of above freezing temp liquids then immediately whisking the mixture at room temp to a target overrun without pre-aging, and then freezing that product statically till desired hardness is achieved. The main execution of this process involves the use of dry powders that are transported and sold dry and then reconstituted by the end user before they are combined without pre-treatment, freezing homogenization or aging. The manufacturing process offers significant advantages over current dry mix production methods which require significant upfront investment and produce hard to customize mixes. The formulation and finished product making portions of the invention offer significant improvement over existing manufacturing methods for frozen desserts and dessert mixes that require simultaneous freezing and aeration in terms of cost, convenience, customizability, shelf-stability and environmental impact.

The invention relates to a polymer composition which absorbs infrared radiation (IR), containing a transparent thermoplastic plastic, an inorganic infrared absorber, also referred to as IR absorber hereinbelow, at least one inorganic nano-scale pigment, and the combination of at least two organic coloring agents of a specific structure, and to the preparation and use of the polymer compositions according to the invention and to products produced therefrom.

The invention discloses a laundry article used for both cleaning and conditioning fabrics comprising a water-insoluble nonwoven substrate and coated thereon into at least one zone each a detergent composition and a fabric conditioning composition. The fabric conditioning composition comprises a quaternary ammonium cationic surfactant, an alkoxylated fatty alcohol and a fatty acid.

A candle with shimmering properties has (i) wax; and (ii) light reflective particles dispersed throughout the wax, in the form of a candle base mixture, such that upon lighting the candle base mixture with a flame, at least a portion of the candle base mixture melts from a solid state to a liquid state, forming a pool of molten liquid in which the liquid moves. The light reflective particles highlight the movement of the liquid, such that the movement of the liquid is visible to an observer. A wick may be mounted within the candle base mixture and a container may contain the candle base mixture. A fragrance and/or dye are optional ingredients of the candle.

The invention relates to encapsulation structures for OLED displays, wherein the structure provides sufficient barrier properties against oxygen and moisture as well as anti-reflection properties. The structure includes a layer comprising a photo-aligned substance which in a synergistic manner controls both barrier and anti-reflection properties.

Measuring system for measuring the properties of an organic material, e.g. meat, comprising a light source unit emitting light within at least one chosen range of wavelengths, the light source unit being coupled to a light guide in a ferrule being adapted to be introduced into said material, the system also comprising detector means for being adapted to receive light within said at least two wavelength ranges comprised within said emitted range of wavelengths, having passed through a chosen length in said material, and analyzing means for evaluating the condition of the material based on the measured absorption in the material in said at least two ranges of wavelengths

Measurements are taken of moisture, BTU/lb (British Thermal Units per pound), ash, forms of sulfur, volatile material, grindability, and absorption properties of any of a wide variety of mine-run solid fuels. Using that information, a dry electromagnetic process technology has been developed that can be controlled and monitored to selectively alter and enhance metallurgical solid fuel properties. Specific changes include altering the mechanical structure and chemical composition of solid fuels such as coal, coal coke or petroleum coke, increasing the BTU/lb to optimum levels, decreasing all forms of sulfur, and decreasing ash, while maintaining the BTU/lb of the fuels. A new family of solid fuel designer coals not found in nature can be produced via these methods and apparatus.

A fabric having moisture management properties is disclosed. The fabric can also be made to be fire resistant. The fabric is particularly well suited for being used as an inner lining in protective garments. The fabric contains first yarns and second yarns. The first yarns extend in a first direction and the second yarns extend in the second direction. The yarns are woven together such that the first yarns form a pattern of shapes. The pattern of shapes concentrate the FR cellulose fibers and provide channels for carrying away moisture and improving the moisture management properties of the fabric.

As the drought continues grazing families are confronted with decisions about whether to sell their stock and land. Some are taking a risk on buying a second property, carting livestock and young children hundreds of kilometres to keep their businesses alive.

Generations of Australia's prime breeding cows are heading to slaughterhouses as a lack of water and feed sees more producers opt to "cash in and get out".

The Aboriginal Land Council of Tasmania says more private landowners are investigating handing their land back to Aboriginal people, to protect it from development and "to do the right thing".

Researchers from the Massachusetts Institute of Technology (MIT) have used fine-scale 3D bioprinting to grow cells that are highly uniform in shape and size, and potentially with certain functions.

A team of engineers at Tufts University has developed a series of 3D printed metamaterials with unique microwave or optical properties.

A program supporting the homeless with a mentor once they're housed is being hailed as a way to reduce the number of people sleeping rough.

(United States Fifth Circuit) - Appeals court affirmed district court's decision that the federal tax lien was enforceable even though it had errors on the document. The appeals court held that even with the errors there was adequate notice of the lien, because it conformed to the IRS code.

(United States Fifth Circuit) - Affirmed. The district court properly dismissed a suit brought by a man whose state court award in a Takings Clause suit against state officials was unsatisfying to him. The State was entitled to sovereign immunity.

(United States Seventh Circuit) - Held that two riders seriously injured while horseback riding in Wisconsin could not pursue negligence claims against trail and stable operators, because their causes of action were barred by Wisconsin's equine-immunity statute, which blocks recovery for most injuries that result from an inherent risk of equine activities. Affirmed summary judgment and judgment on the pleadings against the riders, respectively.