This research seeks to analyse the project success factors related to project managers’ traits. The context of the research entails a ‘United Nations’ type of organization. Critical success factors from previous recent studies were adopted for this research. Nineteen factors were adopted and a survey methodology approach was followed. Sixty six participants completed the survey. Exploratory factor analysis results revealed the existence of two constructs: project manager engagement, and project manager certification. The total number of factors representing these two constructs after the factor reduction exercise is nine. Our findings indicate that the capacity for a project manager to communicate and lobby for the project to create and sustain positive perceptions, is the most important factor; whereas project manager credentials are viewed as not important for his/her success. The results may seem counter-intuitive, however, in the context of United Nations Organizations, consideration of their political, cultural and international nature reveals that the results apply.

It can be argued that public organizations, in order to provide the public with sufficient services in the current, highly competitive and continuously evolving environment, require changes. The changes that become necessary are often related to the implementation of information systems (IS). Moreover, when organizations are faced with changes, a change management (CM) process needs to be put in place. CM theories that are currently available to practitioners and academics are often contradictory; they mostly lack empirical evidence and are supported by unchallenged hypotheses concerning the nature of the contemporary CM. The aim of this paper is, therefore, to identify critical success factors (CFSs) for CM in IS projects. In order to reach this aim an explanation of changes in public organizations and the nature of CM are presented. Following this, a framework of CFSs for CM in IS projects are identified based on the literature review. The paper also examines two IS projects and uses them to demonstrate CFSs influencing CM in IS projects in Polish pubic organizations. A discussion of the research findings is provided and the paper concludes with a presentation of the study’s contributions and limitations as well as the stream of future work.

Universities have traditionally been leaders in the field of knowledge production, research, and societal development. They are expected to be drivers of innovation, thereby contributing to the development of a learning society. The array of challenges facing universities in Nigeria and other developing countries forces one to question their levels of innovation. While knowledge management has been identified as a strategy for driving innovative processes in business organizations, there is a paucity of literature on its application in Nigerian universities. This paper, therefore, proposes a conceptual model which Nigerian universities could adopt, in order to drive innovation and performance. As the paper is conceptual in nature, a literature survey was conducted to examine the concept of knowledge management and its application in higher education institutions. Findings from the literature informed the development of a conceptual model describing ways in which universities can adopt knowledge management practices and strategies in order to drive innovation and improve performance. The conceptual model proposed in this paper could serve as a basis for empirical investigations on knowledge management processes in universities. The paper concludes that, while knowledge management has the potential for improving performance within universities, the proposed model must be subjected to empirical validation for further amendments and improvements.

Efficient knowledge and information management is essential for companies to prosper in the rapidly changing global environment. This article presents challenges of a large Finnish multinational company relating to their current knowledge and information management practices and systems. The focus is on New Product Introduction (NPI) process. The study is based on interviews and facilitated workshops in the Research and Development (R&D) and Production departments. Furthermore, the identified challenges are reflected to the findings presented in knowledge and information management literature. The results gained from the company case study were well in line with the findings in the literature. Three main topics, which can be generalized to cause challenges for knowledge and information management in most companies, were recognized: 1) Issues related to human behavior, individual characteristics and capabilities, different backgrounds, and professional vocabulary; 2) Codifying tacit knowledge into explicit information, which can be saved to company information system; 3) Lack of interoperability between different information systems. The study provides the management of the case company, and other similar organizations, focus points while seeking for better knowledge and information management. From a scientific perspective, the main contribution of this article is to give practical examples of how the theoretical findings presented in literature manifest themselves in real industrial practices.

Knowledge management research applied to the development of real-time research capability, or capability to solve societal problems in hours and days instead of years and decades, is perhaps increasingly important, given persistent global problems such as the Zika virus and rapidly developing antibiotic resistance. Drawing on swarm intelligence theory, this paper presents an approach to real-time research problem-solving in the form of a framework for understanding the complexity of real-time research and the challenges associated with maximizing collaboration. The objective of this research is to make explicit certain theoretical, methodological, and practical implications deriving from new literature on emerging technologies and new forms of problem solving and to offer a model of real-time problem solving based on a synthesis of the literature. Drawing from ant colony, bee colony, and particle swarm optimization, as well as other population-based metaheuristics, swarm intelligence principles are derived in support of improved effectiveness and efficiency for multidisciplinary human swarm problem-solving. This synthesis seeks to offer useful insights into the research process, by offering a perspective of what maximized collaboration, as a system, implies for real-time problem solving.

For more than two decades, knowledge management (KM) has been examined in the literature and considered a basic factor in business management. The purpose of this article is to explore the ability of knowledge management to achieve small and medium-sized enterprise (SME) innovation and business performance. Data analysis procedures of PLS-SEM was used to analyze the data based on responses from the owners of 903 companies in industry, construction, services, and trade in the Region of Murcia (Spain) through a self-directed survey. The results show that KM has a significant influence on innovation but the influence on the level of performance of SMEs is insignificant. However, training employees as part of KM showed no significant influence on innovation in SMEs. It is important for leaders and managers to have greater openness to changes in the implementation and proper execution of KM. This work contributes primarily to the development of the literature on knowledge management and its relationship with innovation and business performance.

Aim/Purpose: This paper aims to present an example of the application of a Knowledge Man-agement (KM) framework to automotive original component manufacturers (OEMs). The objective is to explore KM according to the four pillars of a selected KM framework. Background: This research demonstrates how a framework, namely the George Washington University’s Four Pillar Framework, can be used to determine the KM status of the automotive OEM industry, where knowledge is complex and can influence the complexity of the KM system (KMS) used. Methodology: An empirical study was undertaken using a questionnaire to gather quantitative data. There were 38 respondents from the National Association of Automotive Component and Allied Manufacturers (NAACAM) and suppliers from three major automotive OEMs. The respondents were required to be familiar with the company’s KMS. Contribution: Currently there is a limited body of research available on the KM implementation frameworks for the automotive industry. This study presents a novel approach to the use of a KM framework to reveal the status of KM in automotive OEMs. At the time of writing, the relationship between the four pillars and the complexity of KMS had not yet been determined. Findings: The results indicate that there is a need to improve KM in the automotive OEM industry. According to the relationships investigated, the four pillars, namely leadership, organization, technology and learning, are considered important for KM, regardless of the level of KMS complexity, Recommendations for Practitioners: Automotive OEMs need to ensure that the KM aspects are established and should be periodically evaluated by using a KM framework such as the George Washington University’s Four Pillar Framework to identify KM weaknesses. Recommendation for Researchers: The establishment and upkeep of a successful KM environment is challenging due to the complexity involved with various influencing aspects. To ensure that all aspects are considered in KM environments, comprehensive KM frameworks, such as the George Washington University’s Four Pillar Framework, need to be applied. Impact on Society: The status of KM management and accessibility of knowledge in organizations needs to be periodically examined, in order to improve supplier and OEM knowledge sharing. Future Research: Although the framework used provides a process for KM status determination, this study could be extended by investigating a methodology that includes KMS best practice and tools. This study could be repeated at a national and international level to provide an indication of KM practice within the entire automotive industry.

Aim/Purpose: This study aims to investigate the relationship between the knowledge management (KM) process and the performance of construction companies. The ultimate goal is to promote better efficiency and competitive advantage in the construction industry by making the best use of knowledge. Background: While attention to KM is currently on the rise, as shown by the number of studies conducted, research on KM in the construction industry of Indonesia is still very rare. However, organizational learning as the implementation of KM provides an opportunity to improve the construction industry, and thus there is an urgency to conduct research on this topic. Methodology: This study lasted for three months and used the survey method, with 100 questionnaires distributed to contractors of grade 6 and 7 on the islands of Java and Borneo in Indonesia. A total of 54 returned questionnaires were deemed complete and eligible for further analysis. Data analysis was performed using the structural equation modeling method with partial least squares (SEM PLS). Contribution: This study helps to measure the relationship value of the KM process and company performance. Findings: The results of this study indicate that the process of KM has a significant and positive influence on company performance, and there is a positive interaction in the process of KM and company performance as well. Recommendations for Practitioners: Construction companies need to perceive that activities undertaken in a construction project should always be assumed to be a KM process in order to make strategic and effective decisions that can result in improvements to customers, finance, internal business, learning, and growth. Recommendation for Researchers: Research on the KM process and information technology needs to be developed more, so that construction companies can apply this knowledge to explore problems and create solutions, resulting in methods to facilitate efficiency and effectiveness. Impact on Society: This paper helps to understand that KM activities provide initial benefits and guidance for companies that want to apply KM. Future Research: Innovative and new ideas to cultivate the KM process in the construction industry need to be explored and developed to improve the implementation.

Aim/Purpose: The objective of this study was to assess the interrelationships among knowledge management infrastructure, knowledge management process, intellectual capital, and organization performance. Background: Although knowledge management capability is extensively used by organizations, reaching their maximum financial and non-financial performances has not been fully researched. Therefore, organizations need to optimize their performance by exploiting knowledge management capability through the accumulation of intellectual capital, where the new competitiveness is shifting from tangible to intangible resources. Methodology: This study adopted a positivist philosophy and deductive approach to accomplish the main goal of this research. Moreover, this research employed a quantitative approach since this study is concerned with causal relationship between variables. A questionnaire-based survey was designed to evaluate the research model using a convenience sample of 134 employees from the food industry sector in Jordan. Surveyed data was examined following the structural equation modeling procedures. Contribution: This study highlighted the potential benefits of applying the knowledge management capabilities, intellectual capital, and organizational performance to the food industrial sector in Jordan. Future research suggestions are also provided. Findings: Results indicated that knowledge management infrastructure had a positive effect on knowledge management process. In addition, knowledge management process impacted positively intellectual capital and organization performance and mediated the relationship between knowledge management infrastructure and intellectual capital. However, knowledge management infrastructure did not positively associate to organization performance. Recommendations for Practitioners: The current model is designed to help managers and decision makers to improve their management capabilities as well as their organization financial and non-financial performance through exploiting the organizational knowledge management infrastructure and intellectual capital approaches. Recommendation for Researchers: Our findings can be used as a base of knowledge to conduct further studies about knowledge management capabilities, intellectual capital, and organization performance following different criteria and research procedures. Impact on Society: The designed model highlights a significant organizational performance approach that can influence Jordanian food industrial sector positively. Future Research: The current designed research model can be applied and assessed further in other sectors including banking and industrial sectors across developed and developing countries. Also, we suggest that in addition to focusing on knowledge management process and intellectual capital as mediating variables, future research could test our findings in a longitudinal study and examine how to affect financial and non-financial performance.

Aim/Purpose: This study investigates the research profile of the papers published in Interdisciplinary Journal of Information, Knowledge, and Management (IJIKM) to provide silhouette information of the journal for the editorial team, researchers, and the audience of the journal. Background: Information and knowledge management is an interdisciplinary subject. IJIKM defines intersections of multiple disciplinary research communities for the interdisciplinary subject. Methodology: A quantitative study of categorical content analysis was used for a thematic analysis of IJIKM. One hundred fifty nine (159) papers published since the inauguration of the journal in 2006 were coded and analyzed. Contribution: The study provides synopsized information about the interdisciplinary research profile of IJIKM, and adds value to the literature of information and knowledge management. Findings: The analysis reveals that IJIKM disseminates research papers with a wide range of research themes. Among the research themes, Organizational issues of knowledge/information management, Knowledge management systems/tools, Information/knowledge sharing, Technology for knowledge/information management, Information/knowledge application represent the five main research streams of IJIKM. The total number of papers on organizational issues of knowledge/information management increased from 16% to 28% during the past 6 years. Statistical method was the most common research methodology, and summarization was the most common research design applied in the papers of IJIKM. The paper also presents other patterns of participant countries, keywords frequencies, and reference citations. Recommendations for Practitioners: Innovation is the key to information and knowledge management. Practitioners of information and knowledge management can share best practices with external sectors. Recommendation for Researchers: Researchers can identify opportunities of cross-disciplinary research projects that involve experts in business, education, government, healthcare, technology, and psychology to advance knowledge in information and knowledge management. Impact on Society: Information and knowledge management is still a developing field, and readers of this paper can gain more understanding of the dissemination of the literature of information and knowledge management involved in all relevant disciplines. Future Research: A longitudinal study could follow up in the future to provide updated and comparative information of the research profile of the journal.

Aim/Purpose: Two research objectives were addressed in this study. The first objective was to determine the effect of knowledge management orientation behaviour on business performance, and the second objective was to investigate the mediating effect of market orientation in the relationship between knowledge management orientation behaviour and business performance. Background: In business strategic perspective, the idea of knowledge management has been discussed widely. However, there is a lack of study exploring the notion of knowledge management orientation especially in the perspective of Indonesia’s creative economy sector. Methodology: One hundred and thirty one participants were involved in this study. They were economy creative practitioners in Indonesia. Data were analysed by using Partial Least Squares. Contribution: Upon the completion of the research objectives, this study contributes to both theoretical and practical perspectives. From a theoretical standpoint, this study proposes a conceptual model explaining the relationship among knowledge management orientation behaviour, market orientation, and business performance in Indonesia’s creative economy sector. As this study found a significant effect of knowledge sharing in market orientation and market orientation in business performance, the study showed the mediation role of market orientation in the relationship between knowledge sharing and business performance. From a practical perspective, this study implies a guideline for business practitioners in enhancing business through the application of knowledge management orientation behaviour. Findings: The results show that organizing memory, knowledge absorption, and knowledge receptivity has a direct significant effect on business performance. However, in affecting business performance, knowledge sharing must be mediated by market orientation. Recommendations for Practitioners: Based on the results of the study, practitioners should enhance their behaviour in implementing knowledge management in terms of increasing business performance. In addition, it is suggested that business practitioners must be market driven, as market orientation was found to have an important role in affecting business performance. Recommendation for Researchers: Future researchers might integrate other constructs such as innovation, marketing capabilities, or organizational learning with this current conceptual model to have more comprehensive insight about the relationship between knowledge management orientation and business performance. Impact on Society: This study suggests that business practitioners must have knowledge management driven behaviour as well as market orientation to enhance the performance of their business. Future Research: Future research might add other variables to make the conceptual model more comprehensive and also replicate this study into different industrial settings.

Aim/Purpose: This research aims to develop an information technology (IT) maturity model for incident management (IM) process that merges the most known IT frameworks’ practices. Our proposal intends to help organizations overcome the current limitations of multiframework implementation by informing organizations about frameworks’ overlap before their implementation. Background: By previously identifying frameworks’ overlaps it will assist organizations during the multi-framework implementation in order to save resources (human and/or financial). Methodology: The research methodology used is design science research (DSR). Plus, the authors applied semi-structured interviews in seven different organizations to demonstrate and evaluate the proposal. Contribution: This research adds a new and innovative artefact to the body of knowledge. Findings: The proposed maturity model is seen by the practitioners as complete and useful. Plus, this research also reinforces the frameworks’ overlap issue and concludes that some organizations are unaware of their actual IM maturity level; some organizations are unaware that they have implemented practices of other frameworks besides the one that was officially adopted. Recommendations for Practitioners: Practitioners may use this maturity model to assess their IM maturity level before multi-framework implementation. Moreover, practitioners are also incentivized to communicate further requirements to academics regarding multi-framework assessment maturity models. Recommendation for Researchers: Researchers may explore and develop multi-frameworks maturity models for the remaining processes of the main IT frameworks. Impact on Society: This research findings and outcomes are a step forward in the development of a unique overlapless maturity model covering the most known IT frameworks in the market thus helping organizations dealing with the increasing frameworks’ complexity and overlap. Future Research: Overlapless maturity models for the remaining IT framework processes should be explored.

Aim/Purpose: The purpose of this study is to investigate the relationship between knowledge management (KM) and organizational innovation (OI). It also enriches our understanding of the mediating effect of organizational learning (OL) in this relationship. Background: KM’s relationship with OL and OI has been tackled extensively in developed countries’ literature. Nowadays, the challenges of developing countries lie in the process of knowledge application. This study attempts to develop a new managerial knowledgeable tool and present a theoretical model and empirical analysis of the relationship between KM and innovation in Jordan, a developing country. To the knowledge of the author, no attempt has been taken to investigate this relationship in any Jordanian sector. Methodology: The sample of this study consists of 457 managers representing strategic, tactical, and operational levels randomly selected from 56 manufacturing companies in Jordan. A questionnaire-based survey has been developed based on KM, OL and OI literature to collect data. A structural equation modeling (SEM) approach was applied to investigate the proposed research model. Contribution: This study contributes to the literature in different ways. First, it asserts that OL assists in improving OI in manufacturing organization of developing countries. Second, it highlights the substantial benefits of applying KM, OL and OI in manufacturing companies in Jordan. Furthermore, it enhances the relationship between KM and innovativeness’ literature by providing empirical evidence, suggesting that OL is as important as KM to advance organizational innovation. Most importantly, it identifies the problem of a developing economy which is not promoting OL or taking care of it as much as they attended to KM in their organizational practices. Findings: Study findings indicate that the relationship between KM and OI is significantly positive. Results also reveal that the relationship between KM and organizational learning is significantly positive. Empirical results emerging from this study indicate that there is partial mediation to support the relationship between OL and OI. Recommendations for Practitioners: This study suggests that managers ought to recognize that organizational learning is equally important to KM. This entails that OL should be utilized within organizations to achieve organizational innovation. Moreover, managers ought to comprehend their importance and encourage their employees to adopt knowledge from various sources; which, if implemented correctly, will enhance the OL environment. Recommendation for Researchers: The research model can be used or applied in different manufacturing and service sectors across the globe. The findings of the current study can serve as a foundation to perform different studies to understand KM processes and recognize its antecedence. Impact on Society: This study presents insights on how to apply KM, OL and OI methodologies in Jordanian manufacturing companies to achieve a competitive advantage; hence, positively influencing society. Future Research: Future research may include conducting a similar study in the context of developed countries and developing countries which allows for comparison. Also, future research may examine the impact of KM on organizational performance applying both OL and OI as mediating variables.

Aim/Purpose: This research aims to examine the role of Knowledge Management (KM) infrastructure (technological, structural, and cultural) in enhancing job satisfaction in the context of developing countries, as exemplified by Jordan. Background: Despite the presence of job satisfaction studies conducted in educational institutions across the world, knowledge management issues have not been taken into consideration as influencing factors. Methodology: A total of 168 responses to a questionnaire survey were collected from the academic staff at Zarqa University in Jordan. Multiple regression analysis was conducted to test the research hypotheses. Contribution: This study offers deeper understanding about the role that knowledge management infrastructure plays in enhancing job satisfaction from a developing country perspective. The proposed model is tested the first time in Jordan. Findings: Results of the current study revealed that there are significant positive impacts of technological and cultural KM infrastructures on job satisfaction, whereas structural KM infrastructure does not have a significant impact on job satisfaction. Also, the results revealed significant gender difference in perception of the impact of knowledge management infrastructure on job satisfaction. On the other hand, an ANOVA test found no significant difference in the impact of knowledge management infrastructure on job satisfaction among groups by age, experience, and academic rank. Recommendation for Researchers: Our findings can be used as a base of knowledge for further studies about knowledge management infrastructure and job satisfaction following different criteria and research procedures. Future Research: The current model can be applied and assessed further in other sectors, including public universities and other services sectors in developed and developing countries.

Aim/Purpose: This study aimed to examine the effect of marketing knowledge management (MKM) on bank performance via the mediating role of the Fintech innovation in Jordanian commercial banks. Background: An extensive number of studies found a significant relationship between Marketing knowledge management and bank performance (e.g., Akroush & Al-Mohammad, 2010; Hou & Chien 2010; Rezaee & Jafari, 2015; Veismoradi et al., 2013). However, there remains a lack of clarity regarding the relationship between marketing knowledge management (MKM) and bank performance (BP). Furthermore, the linkage between MKM and BP is not straightforward but, instead, includes a more complicated relationship. Therefore, it is argued that managing marketing knowledge management assets and capabilities can enhance performance via the role of financial innovation as a mediating factor on commercial banks; to date, however, there is no empirical evidence. Methodology: Based on a literature review, knowledge-based theory, and financial innovation theory, an integrated conceptual framework has been developed to guide the study. A quantitative approach was used, and the data was collected from 336 managers and employees in all 13 Jordanian commercial banks using online and in hand instruments. Structural equation modeling (SEM) was used to analyze and verify the study variables. Contribution: This article contributes to theory by filling a gap in the literature regarding the role of marketing knowledge management assets and capabilities in commercial banks operating in a developing country like Jordan. It empirically examined and validated the role of Fintech innovation as mediators between marketing knowledge management and bank performance Findings: The main findings revealed that marketing knowledge management had a significant favorable influence on bank performance. Fintech innovation acted as partial mediators in this relationship. Recommendations for Practitioners: Commercial banks should be fully aware of the importance of knowledge management practices to enhance their financial innovation and bank performance. They should also consider promoting a culture of practicing knowledge management processes among their managers and employees by motivating and training to promote innovations. Recommendation for Researchers: The result endorsed Fintech innovation’s mediating effect on the relationship between the independent variable, marketing knowledge management (assets and capabilities), and the dependent variable bank performance, which was not addressed before; thus, it needs further validation. Future Research: The current designed research model can be applied and assessed further in other sectors, including banking and industrial sectors across developed and developing countries. It would also be of interest to introduce other variables in the study model that can act as consequences of MKM capabilities, such as financial and non-financial performance measures

Aim/Purpose: This study aimed to investigate the impact of innovation management and learning orientation as the mechanisms playing the role of an intermediate relationship between entrepreneurial leadership and organisational performance of small and medium enterprises (SMEs) in Kuwait. Background: SMEs are currently among the principal economic instruments in most industrialised and developing countries. The contribution of SMEs can be viewed from various perspectives primarily related to the crucial role they play in developing entrepreneurial activities, employment generation, and improving innovativeness. Developing countries, including Kuwait and other countries, in the Gulf Cooperation Council (GCC), have recognised the key role played by SMEs as a strong pillar of growth. Consequently, many governments have formulated policies and programmes to facilitate the growth and success of SMEs. Unfortunately, the organisational performance of SMEs in developing countries, particularly in Kuwait, remains below expectations. The lagged growth could be due to a lack of good managerial practices and increasing competition that negatively impact their performance. Numerous researchers discovered the positive effect of entrepreneurial leadership on SMEs’ performance. However, a lack of clarity remains regarding the direct impact of entrepreneurial leadership on SMEs’ performance, especially in developing countries. Therefore, the nexus between entrepreneurial leadership and organisational performance is still indecisive and requires further studies. Methodology: This study adopted a quantitative approach based on a cross-sectional survey and descriptive design to gather data within a specific period. The data were collected by distributing a survey questionnaire to Kuwaiti SMEs’ owners and Chief Executive Officers (CEOs) via online and on-hand instruments. A total of 384 useable questionnaires were obtained. Moreover, the partial least square-structural equation modelling (PLS-SEM) analysis was performed to test the hypotheses. Contribution: The current study contributed to the existing literature by developing a moderated mediation model integrating entrepreneurial leadership, innovation management, and learning orientation. The study also investigated their effect on the organisational performance of SMEs. The study findings also bridged the existing significant literature gap regarding the role of these variables on SMEs’ performance in developing countries, particularly in Kuwait, due to the dearth of studies linking these variables in this context. Furthermore, this study empirically confirmed the significant effect of innovation management and learning orientation as intermediate variables in strengthening the relationship between entrepreneurial leadership and organisational performance in the settings of Kuwait SMEs, which has not been verified previously. Findings: The study findings showed the beneficial and significant impact of entrepreneurial leadership and innovation management on SME’s organisational performance. The relationship between entrepreneurial leadership and SMEs’ organisational performance is fundamentally mediated by innovation management and moderated by learning orientation. Recommendations for Practitioners: The present study provides valuable insights and information regarding the factors considered by the government, policymakers, SMEs’ stakeholders, and other authorities in the effort to increase the organisational performance level and facilitate the growth of SMEs in Kuwait. SMEs’ owners or CEOs should improve their awareness and knowledge of the importance of entrepreneurial leadership, innovation management, and learning orientation. These variables will have beneficial effects on the performance and assets to achieve success and sustainability if adopted and managed systematically. This study also recommends that SMEs’ entrepreneurs and top management should facilitate supportive culture by creating and maintaining an organisational climate and structure that encourages learning behaviour and innovation mindset among individuals. The initiative will motivate them towards acquiring, sharing, and utilising knowledge and increasing their ability to manage innovation systemically in all production processes to adapt to new technologies, practices, methods, and different circumstances. Recommendation for Researchers: The study findings highlighted the mediating effect of innovation management on the relationship between entrepreneurial leadership (the independent variable) and SMEs’ organisational performance (the dependent variable) and the moderating effect of learning orientation in the same nexus. These relationships were not extensively addressed in SMEs of developing countries and require further validation. Impact on Society: This study aims to influence the management strategies and practices adopted by entrepreneurs and policymakers who work in SMEs in developing countries. The effect will be reflected in the development of their firms and the national economy in general. Future Research: Future research should investigate the conceptual research framework against the backdrop of other developing economies and in other business settings to generalise the results. Future investigation should seek to establish the effect of entrepreneurial leadership style on other mechanisms, such as knowledge management processes, which could function with entrepreneurial leadership to improve SMEs’ performance efficiently. In addition, future studies may include middle and lower-level managers and employees, leading to more positive outcomes.

Aim/Purpose: ******************************************************************************************** After its investigation, the Research Ethics, Integrity, and Governance team at RMIT University found that the primary author of this paper breached the Australian Code and/or RMIT Policy and requested that the article be retracted. ********************************************************************************************* This paper aimed to examine the impact of knowledge management on firm innovativeness of multinational enterprises (MNEs) via the mediating role of innovative culture in Malaysia. Background: Inadequate management practices and growing competition among MNEs operating in developing nations, notably in Malaysia, have hindered their organizational success. Although several studies have shown that knowledge management has a substantial impact on MNEs’ success, it is not apparent if innovation at the company level has a direct impact on their performance. Thus, there is no definitive evidence between knowledge management with business innovativeness and organizational success. Methodology: This study adopted a quantitative approach based on a cross-sectional survey and descriptive design to gather the data in a specific period. A convenient sampling approach was used to select 296 respondents from Malaysia-dependent MNEs of different industries. One of the advantages of this study methodology is that the sample targeted many fields. Afterward, SPSS AMOS 24.0 software package analysis was performed to test the hypotheses. Contribution: The study contributes to knowledge management and firm innovativeness literature through advancing innovative culture as a mediating factor that accounts for the link between these two constructs, especially from an emerging economy perspective. The research findings also offer managerial implications for organizations in their quest to improve firm innovativeness. Findings: The results support that innovative culture significantly affects MNEs’ performance. Innovative culture enhances the capability of MNEs to be innovative that finally leads to the superior performance of firm innovativeness. Recommendations for Practitioners: According to this research, companies that exhibit an innovative culture, the acquisition of new information, the conversion of tacit knowledge into explicit knowledge, the application of knowledge, and the safeguarding of knowledge, all have a positive effect on their innovativeness. This means that for organizations to run an innovative MNE in Malaysia, a creative culture must be fostered since the current study has shown how it is seen as a catalyst that facilitates learning, transformation, and implementation of relevant knowledge. Recommendation for Researchers: Future studies should be carried out in other sectors aside from the manufacturing sector using the same scales used to measure knowledge management. Furthermore, a comparative analysis of knowledge management and firm innovativeness using innovative culture as a mediator should be researched in other developing economies. Impact on Society: While the main aim of this study was to better understand how and why MNEs operate the way they do, it had an indirect impact on the business and political tactics taken by CEOs and managers working in MNEs in developing countries, as this research has shown. Future Research: Future research should employ the methodology presented in this study and pursue this in other sectors, such as emerging and developed nations’ major businesses, to validate the results and further generalize the conclusions. Other methods should also be incorporated to investigate the other dimensions of MNEs’ performance, including market orientation, technology orientation, and entrepreneurial orientation.

Aim/Purpose: The study attempts to analyse the influences of knowledge management capacity on company performance and supply chain practices. It also examines whether supply chain practices significantly and positively impact company performance. Background: Knowledge management capacity is an essential tactical resource that enables the integration and coordination among supply chain stakeholders, but research examining the link between knowledge management capacity and supply chain practices and their impacts on company performance remains scarce. Methodology: The study uses correlation analysis and factor analysis to confirm the theoretical framework’s validity and structural equation modelling to test hypotheses. The data are obtained from 115 halal food firms in China (with a response rate of 82.7%). Contribution: This study’s findings contribute to the Social Capital Theory by presenting the impacts of different supply chain practices on company performance. The findings also suggest the impact of intangible resources on enhancing company performance, contributing to the Resource-based View Theory. These results are a crucial contribution to both academicians and corporate managers working in the Halal food industry. Managers can apply these findings to discover and adopt knowledge management capacity with practical anticipation that these concepts will align with their company strategies. Also, the research motivates managers to concentrate their knowledge management on enhancing companies’ supply chain practices to achieve improved company performance. Findings: This study is an initial effort that provides empirical evidence regarding the relationships among supply chain, knowledge management, and company performance from the perspective of China’s halal food industry. The results prove that knowledge management capacity is the supply chains’ primary success determinant and influencer. Besides, knowledge management capacity positively influences company performance, and supply chain practices directly influence company performance. Recommendations for Practitioners: Managers can apply these study findings to determine and increase knowledge management capacity with practical anticipation that these concepts will align with their company strategies. Also, the research motivates managers to concentrate their knowledge management on enhancing companies’ supply chain practices to achieve improved company performance. Recommendation for Researchers: The study presents a new theoretical framework and empirical evidence for surveying halal food businesses in China. Impact on Society: These results are a significant contribution to the research field and industry focusing on halal foods. Future Research: First, this research focuses only on halal food businesses in China; thus, it is essential to re-examine the hypothesized relations between the constructs in other Chinese business segments and regions. Next, the effect of variables and practices on the theorized framework should be taken into account and examined in other industries and nations.

Aim/Purpose: The aim of this study is to develop a research model derived from relevant literature to guide empirical efforts. Background: Companies struggle to innovate, which is essential for improving their performance, surviving in competition, and growing. A number of studies have discussed company innovation capability, stating that innovation capability is influenced by several variables such as cooperation and knowledge management. Therefore, further research is necessary to identify factors playing a role in enhancing innovation capability. Methodology: This study is based on systematic literature review. The stages are: (1) research scope review, (2) comprehensive online research, (3) journal quality assessment, (4) data extraction from journals, (5) journal synthesis, and (6) comprehensive report. The online research used Google Scholar database, by browsing titles, abstracts, and keywords to locate empirical research studies in peer-reviewed journals published in 2010-2020. Furthermore, 62 related articles were found, of which 38 articles were excluded from further analysis and 24 articles were selected because they were more related to the topic. Contribution: The results of this study enrich the research in the field of knowledge management, cooperation, and innovation capability by developing a conceptual framework of innovation capability. The proposed theoretical model may be fundamental in addressing the need of a research model to guide further empirical efforts. Findings: This study provides a research model derived from systematically reviewing relevant literature. The proposed theoretical model was done by incorporating the aspects of knowledge management, cooperation, and innovation capability. The model shows that knowledge management and cooperation are essential aspects of innovation capability. Furthermore, this study also provides the dimensions and sub dimensions of each variable that was established after synthesizing the literature review. Recommendations for Practitioners: Business practitioners can use the identified predictors of innovation capability and the dimensions of each variable to explore their company’s innovation capability. They can also take the relevant variables into consideration when making policies regarding innovation. Recommendation for Researchers: The theoretical model proposed in this study needs validation with further empirical investigation. Impact on Society: Readers of this paper can obtain an understanding that knowledge management and cooperation are essential aspects to consider in enhancing innovation capability. Future Research: Future studies should explore other dimensions of knowledge management and cooperation through alternative approaches and perspectives.

Aim/Purpose: This study examined the relationship between critical success factors (CSFs), perceived benefits, and usage intention of Mobile Knowledge Management Systems (MKMS) via an integrated Technology Acceptance Model (TAM) and Information Systems Success Model (ISSM). Background: This study investigates the CSFs (i.e., Strategic Leadership, Employee Training, System Quality, and Information Quality) that impact the usage intention of KMS in mobile contexts which have been neglected. Since users normally consider the usefulness belief in a system before usage, this study examines the role of perceived benefits as a mediator between the CSFs and usage intention. Methodology: A survey-based research approach in the Malaysian semiconductor industry was employed via an integrated model of TAM and ISSM. At a response rate of 59.52%, the findings of this study were based on 375 usable responses. The data collected was analyzed using the Partial Least Squares with SmartPLS 3.0. Contribution: This study contributes to the body of knowledge in the areas of mobile technology acceptance and knowledge management. Specifically, it helps to validate the integrated model of TAM and ISSM with the CSFs from knowledge management and information system. In addition, it provides the would-be adopters of MKMS with valuable guidelines and insights to consider before embarking on the adoption stage. Findings: The findings suggest that Employee Training and Information Quality have a positive significant relationship with Perceived MKMS Benefits. On the contrary, Strategic Leadership, System Quality, and Perceived User-friendliness showed an insignificant relationship with Perceived MKMS Benefits. Additionally, Employee Training and Information Quality have an indirect relationship with MKMS Usage Intention which is mediated by Perceived MKMS Benefits. Recommendations for Practitioners: The findings are valuable for managers, engineers, KM practitioners, KM consultants, MKMS developers, and mobile device producers to enhance MKMS usage intention. Recommendation for Researchers: Researchers would be able to conduct more inter-disciplinary studies to better understand the relevant issues concerning both fields – knowledge management and mobile computing disciplines. Additionally, the mediation effect of TAM via Perceived Usefulness (i.e., perceived MKMS benefits) on usage intention of MKMS should be further investigated with other CSFs. Future Research: Future studies could perhaps include other critical factors from both KM and IS as part of the external variables. Furthermore, Perceived Ease of Use (i.e., Perceived User-friendly) should be tested as a mediator in the future, together with Perceived Usefulness (i.e., perceived MKMS Benefits) to compare which would be a more powerful predictor of usage intention. Moreover, it may prove interesting to find out how the research framework would fit into other industries to verify the findings of this study for better accuracy and generalizability.

Aim/Purpose: This study examines the impact of decision-making, crisis management, and decision-making on sustainability through the mediation of open innovation in the energy sector. Background: Public companies study high-performance practices, requiring overcoming basic obstacles such as financial crises that prevent the adoption and development of sustainability programs. Methodology: Due to the COVID-19 pandemic, which has led to the closure of businesses in Iraq, a survey was distributed. To facilitate responses, free consultations were offered to help complete the questionnaire quickly. Of the 435 questionnaires answered, 397 were used for further analysis. Contribution: The impact of crises that impede the energy sector from adopting sustainable environmental regulations is investigated in this study. Its identification of specific constraints to open innovation leads to the effectiveness of adopting environmentally friendly policies and reaching high levels of sustainable performance. Findings: The impacts of risk-taking, crisis management, and decision-making on sustainability have been explored. Results show that open innovation fully mediates the relationship between the factors of risk-taking, crisis management, decision-making, and sustainability. Recommendations for Practitioners: The proposed model can be used by practitioners to develop and improve sustainable innovation practices and achieve superior performance. Recommendation for Researchers: Researchers are recommended to conduct in-depth studies of the phenomenon based on theoretical and empirical foundations, especially in light of the relationship between crisis management, decision-making, and risk-taking and their impact on sustainability based on linear and non-compensatory relationships. Impact on Society: This study provides a reference for organizations with similar cultural backgrounds in adopting sustainable practices to minimize pollution in the Iraqi context. Future Research: A more in-depth study can be performed using a larger sample, which not only includes the energy industry but also other industries.

Aim/Purpose: This research aims to analyze the effect of human resource management on humanitarian operations performance, using humanitarian organizations in Malaysia as a case. Background: Humanitarian organizations need to develop and continue effective on-the-job human resource management, such as training and development and managing employee performance to enhance the performance of their humanitarian operations. Methodology: The sampling technique that was conducted is probability sampling. In particular, the technique is called stratified sampling. This technique is chosen because it is involving the division of a population into a smaller group, called “strata”. The questionnaire survey was distributed to humanitarian organizations in Malaysia to collect research data, and PLS-SEM analysis was conducted to validate the conceptual model. Contribution: This research focuses on the effect of human resource management on humanitarian operations performance in humanitarian organizations with consistent training to ensure successful humanitarian operations. Findings: The results of PLS-SEM analysis confirmed that Training and Employee Development, Recruitment and Employee Selection, and Communicative Management Style are significantly correlated with humanitarian operations performance, giving 75.7% variations which means that these human resource management are critical factors for increasing humanitarian operations performance in Malaysian humanitarian organizations. Recommendations for Practitioners: This research will enhance humanitarian operations performance for humanitarian organizations, in-line policies outlined under the Malaysia National Security Council Directive No. 20, and benefit the field of disaster management. Recommendation for Researchers: This research can be used by the authorized individual involved in humanitarian operations to satisfy the needs of the victims, which ultimately contributes to the performance of these humanitarian organizations. Impact on Society: This research highlighted the human resource management that is vital for humanitarian organizations, which will increase humanitarian operations performance in an organization. Future Research: This study is conducted in the context of humanitarian organizations in Malaysia. It is unclear whether the key findings of this study can be generalized. Therefore, it is suggested that, in future research, the current research model should be extended to include different countries for validation.

Aim/Purpose: The purpose of this study is to identify the key determinants hindering Knowledge Transfer (KT) practices for Information Technology Project Managers (ITPMs) Background: The failure rate of IT projects remains unacceptably high worldwide, and KT between project managers and team members has been recognized as a significant issue affecting project success. Therefore, this study tries to identify the determinants of KT within the context of IT projects for ITPMs. Methodology: A systematic review of the literature (SLR) was employed in the investigation. The SLR found 28 primary studies on KT for ITPMs that were published in Scopus and Web of Science databases between 2010 and 2023. Contribution: Social Cognitive Theory (SCT) was used to build a theoretical framework where the determinants were categorized into Personal factors, Environmental (Project organizational) factors, and other factors, such as Technological factors influencing ITPMs (Behavioral factors), to implement in KT practices. Findings: The review identified 11 key determinants categorized into three broad categories: Personal factors (i.e., motivation, absorptive capability, trust, time urgency), Project Organizational factors (i.e., team structure, leadership style, reward system, organizational culture, communication), and Technological factors (i.e., project task collaboration tool and IT infrastructure and support) that influence implementing KT for ITPMs Recommendations for Practitioners: The proposed framework in this paper can be used by project managers as a guide to adopt KT practices within their project organization. Recommendation for Researchers: The review showed that some determinants, such as Technological factors, have not been adequately explored in the existing KT model in the IT projects context and can be integrated with other relevant theories to understand how a project manager’s knowledge can be transferred and retained in the organization using technology in future research. Impact on Society: This study emphasizes the role of individual actions and project organizational and technological matters in shaping the efficacy of KT within project organizations. It offers insight that could steer business owners or executives within project organizations to closely observe the behavior of project managers, thereby securing successful project outcomes. Future Research: The determinant list provided in this paper is acquired from extensive SLR and, therefore, further research should aim to expand and deepen the investigation by validating these determinants from experts in the field of IT and project management. Future studies can also add other external technological determinants to provide a more comprehensive KT implementation framework. Similarly, this research does not include determinants identified directly from the industry, as it relies solely on determinants found in the existing literature. Although a comprehensive attempt has been made to encompass all relevant papers, there remains a potential for overlooking some research in this process.

Aim/Purpose: The aim of this research paper is to suggest a comprehensive model that incorporates the technology acceptance model with the task-technology fit model, information quality, security, trust, and managerial support to investigate the intended usage of big data analytics (BDA) in banks and insurance companies. Background: The emergence of the concept of “big data,” prompted by the widespread use of connected devices and social media, has been pointed out by many professionals and financial institutions in particular, which makes it necessary to assess the determinants that have an impact on behavioral intention to use big data analytics in banks and insurance companies. Methodology: The integrated model was empirically assessed using self-administered questionnaires from 181 prospective big data analytics users in Moroccan banks and insurance firms and examined using partial least square (PLS) structural equation modeling. The results cover sample characteristics, an analysis of the validity and reliability of measurement models’ variables, an evaluation of the proposed hypotheses, and a discussion of the findings. Contribution: The paper makes a noteworthy contribution to the BDA adoption literature within the finance sector. It stands out by ingeniously amalgamating the Technology Acceptance Model (TAM) with Task-Technology Fit (TTF) while underscoring the critical significance of information quality, trust, and managerial support, due to their profound relevance and importance in the finance domain. Thus showing BDA has potential applications beyond the finance sector. Findings: The findings showed that TTF and trust’s impact on the intention to use is considerable. Information quality positively impacted perceived usefulness and ease of use, which in turn affected the intention to use. Moreover, managerial support moderates the correlation between perceived usefulness and the intention to use, whereas security did not affect the intention to use and managerial support did not moderate the influence of perceived ease of use. Recommendations for Practitioners: The results suggest that financial institutions can improve their adoption decisions for big data analytics (BDA) by understanding how users perceive it. Users are predisposed to use BDA if they presume it fits well with their tasks and is easy to use. The research also emphasizes the importance of relevant information quality, managerial support, and collaboration across departments to fully leverage the potential of BDA. Recommendation for Researchers: Further study may be done on other business sectors to confirm its generalizability and the same research design can be employed to assess BDA adoption in organizations that are in the advanced stage of big data utilization. Impact on Society: The study’s findings can enable stakeholders of financial institutions that are at the primary stage of big data exploitation to understand how users perceive BDA technologies and the way their perception can influence their intention toward their use. Future Research: Future research is expected to conduct a comparison of the moderating effect of managerial support on users with technical expertise versus those without; in addition, international studies across developed countries are required to build a solid understanding of users’ perceptions towards BDA.

Aim/Purpose: This study analyzes health professionals’ information security behavior (ISB) as health information system (HIS) users concerning associated information security controls and risks established in a public hospital. This work measures ISB using a complete measuring scale and explains the relevant influential factors from the perspectives of Protection Motivation Theory (PMT) and General Deterrence Theory (GDT) Background: Internal users are the primary source of security concerns in hospitals, with malware and social engineering becoming common attack vectors in the health industry. This study focuses on HIS user behavior in developing countries with limited information security policies and resources. Methodology: The research was carried out in three stages. First, a semi-structured interview was conducted with three hospital administrators in charge of HIS implementation to investigate information security controls and threats. Second, a survey of 144 HIS users to determine ISB based on hospital security risk. Third, a semi-structured interview was conducted with 11 HIS users to discuss the elements influencing behavior and current information security implementation. Contribution: This study contributes to ISB practices in hospitals. It discusses how HIS managers could build information security programs to enhance health professionals’ behavior by considering PMT and GDT elements. Findings: According to the findings of this study, the hospital has implemented particular information security management system (ISMS) controls based on international standards, but there is still room for improvement. Insiders are the most prevalent information security dangers discovered, with certain working practices requiring HIS users to disclose passwords with others. The top three most common ISBs HIS users practice include appropriately disposing of printouts, validating link sources, and using a password to unlock the device. Meanwhile, the top three least commonly seen ISBs include transferring sensitive information online, leaving a password in an unsupervised area, and revealing sensitive information via social media. Recommendations for Practitioners: Hospital managers should create work practices that align with information security requirements. HIS managers should provide incentives to improve workers’ perceptions of the benefit of robust information security measures. Recommendation for Researchers: This study suggests more research into the components that influence ISB utilizing diverse theoretical foundations such as Regulatory Focus Theory to compare preventive and promotion motivation to enhance ISB. Impact on Society: This study can potentially improve information security in the healthcare industry, which has substantial risks to human life but still lags behind other vital sector implementations. Future Research: Future research could look into the best content and format for an information security education and training program to promote the behaviors of healthcare professionals that need to be improved based on this ISB measurement and other influential factors.

Aim/Purpose: Given the increasingly important role of knowledge and human resources for firms in developing and emerging countries to pursue innovation, this paper aims to study and explore the potential intermediating roles of knowledge donation and collection in linking high-involvement human resource management (HRM) practice and innovation capability. The paper also explores possible moderators of market turbulence in fostering the influences of knowledge-sharing (KS) behaviors on innovation competence in terms of incremental and radical innovation. Background: The fitness of HRM practice is critical for organizations to foster knowledge capital and internal resources for improving innovation and sustaining competitive advantage. Methodology: The study sample is 309 respondents and Structural Equation Model (SEM) was used for the analysis of the data obtained through a questionnaire survey with the aid of AMOS version 22. Contribution: This paper increases the understanding of the precursor role of high-involvement HRM practices, intermediating mechanism of KS activities, and the regulating influence of market turbulence in predicting and fostering innovation capability, thereby pushing forward the theory of HRM and innovation management. Findings: The empirical findings support the proposed hypotheses relating to the intermediating role of KS in the HRM practices-innovation relationship. It spotlights the crucial character of market turbulence in driving the domination of knowledge-sharing behaviors on incremental innovation. Recommendations for Practitioners: The proposed research model can be applied by leaders and directors to foster their organizational innovation competence. Recommendation for Researchers: Researchers are recommended to explore the influence of different models of HRM practices on innovation to identify the most effective pathway leading to innovation for firms in developing and emerging nations. Impact on Society: This paper provides valuable initiatives for firms in developing and emerging markets on how to leverage the strategic and internal resources of an organization for enhancing innovation. Future Research: Future studies should investigate the influence of HRM practices and knowledge resources to promote frugal innovation models for dealing with resource scarcity.

Aim/Purpose: The aim of this study is to develop and evaluate a comprehensive model that predicts students’ engagement with and intent to continue using mobile-Learning Management Systems (m-LMS). Background: m-LMS are increasingly popular tools for delivering course content in higher education. Understanding the factors that affect student engagement and continuance intention can help educational institutions to develop more effective and user-friendly m-LMS platforms. Methodology: Participants with prior experience with m-LMS were employed to develop and evaluate the proposed model that draws on the Technology Acceptance Model (TAM), Task-Technology Fit (TTF), and other related models. Partial Least Squares-Structural Equation Modeling (PLS-SEM) was used to evaluate the model. Contribution: The study provides a comprehensive model that takes into account a variety of factors affecting engagement and continuance intention and has a strong predictive capability. Findings: The results of the study provide evidence for the strong predictive capability of the proposed model and supports previous research. The model identifies perceived usefulness, perceived ease of use, interactivity, compatibility, enjoyment, and social influence as factors that significantly influence student engagement and continuance intention. Recommendations for Practitioners: The findings of this study can help educational institutions to effectively meet the needs of students for interactive, effective, and user-friendly m-LMS platforms. Recommendation for Researchers: This study highlights the importance of understanding the antecedents of students’ engagement with m-LMS. Future research should be conducted to test the proposed model in different contexts and with different populations to further validate its applicability. Impact on Society: The engagement model can help educational institutions to understand how to improve student engagement and continuance intention with m-LMS, ultimately leading to more effective and efficient mobile learning. Future Research: Additional research should be conducted to test the proposed model in different contexts and with different populations to further validate its applicability.

Aim/Purpose: The use of digital technology, such as an electronic records management system (ERMS), has prompted widespread changes across organizations. The organization needs to support its operations with an automation system to improve production performance. This study investigates ERMS’s potentiality to enhance organizational performance in the oil and gas industry. Background: Oil and gas organizations generate enormous electronic records that lead to difficulties in managing them without any system or digitalization procedure. The need to use a system to manage big data and records affects information security and creates several problems. This study supports decision-makers in oil and gas organizations to use ERMS to enhance organizational performance. Methodology: We used a quantitative method by integrating the typical partial least squares (SEM-PLS) approach, including measurement items, respondents’ demographics, sampling and collection of data, and data analysis. The SEM-PLS approach uses a measurement and structural model assessment to analyze data. Contribution: This study contributes significantly to theory and practice by providing advancements in identity theory in the context of big data management and electronic records management. This study is a foundation for further research on the role of ERMS in operations performance and Big Data Management (BDM). This research makes a theoretical contribution by studying a theory-driven framework that may serve as an essential lens to evaluate the role of ERMS in performance and increase its potentiality in the future. This research also evaluated the combined impacts of general technology acceptance theory elements and identity theory in the context of ERMS to support data management. Findings: This study provides an empirically tested model that helps organizations to adopt ERMS based on the influence of big data management. The current study’s findings looked at the concerns of oil and gas organizations about integrating new technologies to support organizational performance. The results demonstrated that individual characteristics of users in oil and gas organizations, in conjunction with administrative features, are robust predictors of ERMS. The results show that ERMS potentiality significantly influences the organizational performance of oil and gas organizations. The research results fit the big ideas about how big data management and ERMS affect respondents to adopt new technologies. Recommendations for Practitioners: This study contributes significantly to the theory and practice of ERMS potentiality and BDM by developing and validating a new framework for adopting ERMS to support the performance and production of oil and gas organizations. The current study adds a new framework to identity theory in the context of ERMS and BDM. It increases the perceived benefits of using ERMS in protecting the credibility and authenticity of electronic records in oil and gas organizations. Recommendation for Researchers: This study serves as a foundation for future research into the function and influence of big data management on ERMS that support the organizational performance. Researchers can examine the framework of this study in other nations in the future, and they will be able to analyze this research framework to compare various results in other countries and expand ERMS generalizability and efficacy. Impact on Society: ERMS and its impact on BDM is still a developing field, and readers of this article can assist in gaining a better understanding of the literature’s dissemination of ERMS adoption in the oil and gas industry. This study presents an experimentally validated model of ERMS adoption with the effect of BDM in the oil and gas industry. Future Research: In the future, researchers may be able to examine the impact of BDM and user technology fit as critical factors in adopting ERMS by using different theories or locations. Furthermore, researchers may include the moderating impact of demographical parameters such as age, gender, wealth, and experience into this study model to make it even more robust and comprehensive. In addition, future research may examine the significant direct correlations between human traits, organizational features, and individual perceptions of BDM that are directly related to ERMS potentiality and operational performance in the future.

Aim/Purpose: This research aims to design a website-based group decision support system (DSS) user interface to support an integrated and sustainable waste management plan in Jagatera. The main focus of this research is to design a group DSS to help Jagatera prioritize several waste alternatives to be managed so that Jagatera can make the right decisions to serve the community. Background: The Indonesian government and various stakeholders are trying to solve the waste problem. Jagatera, as a waste recycling company, plays a role as a stakeholder in managing waste. In 2024, Jagatera plans to accept all waste types, which impacts the possibility of increasing waste management costs. If Jagatera does not have a waste management plan, this will impact reducing waste management services in the community. To solve this problem, the group DSS assists Jagatera in prioritizing waste based on aspects of waste management cost. Methodology: Jagatera, an Indonesian waste recycling company, is implementing a group DSS using the soft system methodology (SSM) method. The SSM process involves seven stages, including problem identification, problem explanation using rich pictures, system design, conceptual model design, real-life comparison, changes, and improvement steps. The final result is a prototype user interface design addressing the relationship between actors and the group DSS. The analytical hierarchy process (AHP) method prioritized waste based on management costs. This research obtained primary data from interviews with Jagatera management, a literature review regarding the group DSS, and questionnaires to determine the type of waste and evaluate user interface design. Contribution: This research focuses on determining waste handling priorities based on their management. It contributes the DSS, which uses a decision-making approach based on management groups developed using the SSM and AHP methods focused on waste management decisions. It also contributes to the availability of a user interface design from the DSS group that explains the interactions between actors. The implications of the availability of DSS groups in waste recycling companies can help management understand waste prioritization problems in a structured manner, increase decision-making efficiency, and impact better-quality waste management. Combining qualitative approaches from SSM to comprehend issues from different actor perspectives and AHP to assist quantitative methods in prioritizing decisions can yield theoretical implications when using the SSM and AHP methods together. Findings: This research produces a website-based group DSS user interface design that can facilitate decision-making using AHP techniques. The user interface design from the DSS group was developed using the SSM approach to identify complex problems at waste recycling companies in Indonesia. This study also evaluated the group DSS user interface design, which resulted in a score of 91.67%. This value means that the user interface design has met user expectations, which include functional, appearance, and comfort needs. These results also show that group DSS can enhance waste recycling companies’ decision-making process. The results of the AHP technique using all waste process information show that furniture waste, according to the CEO, is given more priority, and textile waste, according to the Managing Director. Group DSS developed using the AHP method allows user actors to provide decisions based on their perspectives and authority. Recommendations for Practitioners: This research shows that the availability of a group DSS is one of the digital transformation efforts that waste recycling companies can carry out to support the determination of a sustainable waste management plan. Managers benefit from DSS groups by providing a digital decision-making process to determine which types of waste should be prioritized based on management costs. Timely and complete information in the group DSS is helpful in the decision-making process and increases organizational knowledge based on the chosen strategy. Recommendation for Researchers: Developing a group DSS for waste recycling companies can encourage strategic decision-making processes. This research integrates SSM and AHP to support a comprehensive group DSS because SSM encourages a deeper and more detailed understanding of waste recycling companies with complex problems. At the same time, AHP provides a structured approach for recycling companies to make decisions. The group DSS that will be developed can be used to identify other more relevant criteria, such as environmental impact, waste management regulations, and technological capabilities. Apart from more varied criteria, the group DSS can be encouraged to provide various alternatives such as waste paper, metal, or glass. In addition to evaluating the group DSS’s user interface design, waste recycling companies need to consider training or support for users to increase system adoption. Impact on Society: The waste problem requires the role of various stakeholders, one of which is a waste recycling company. The availability of a group DSS design can guide waste recycling companies in providing efficient and effective services so that they can respond more quickly to the waste management needs of the community. The community also gets transparent information regarding their waste management. The impact of good group DSS is reducing the amount of waste in society. Future Research: Future research could identify various other types of waste used as alternatives in the decision-making process to illustrate the complexity of the prioritization process. Future research could also identify other criteria, such as environmental impact, social aspects of community involvement, or policy compliance. Future research could involve decision-makers from other parties, such as the government, who play an essential role in the waste industry.

Aim/Purpose: The rise of modern artificial intelligence (AI), in particular, machine learning (ML), has provided new opportunities and directions for knowledge management (KM). A central question for the future of KM is whether it will be dominated by an automation strategy that replaces knowledge work or whether it will support a knowledge-enablement strategy that enhances knowledge work and uplifts knowledge workers. This paper addresses this question by re-examining and updating a critical argument against KM by the sociologist of science Steve Fuller (2002), who held that KM was extractive and exploitative from its origins. Background: This paper re-examines Fuller’s argument in light of current developments in artificial intelligence and knowledge management technologies. It reviews Fuller’s arguments in its original context wherein expert systems and knowledge engineering were influential paradigms in KM, and it then considers how the arguments put forward are given new life in light of current developments in AI and efforts to incorporate AI in the KM technical stack. The paper shows that conceptions of tacit knowledge play a key role in answering the question of whether an automating or enabling strategy will dominate. It shows that a better understanding of tacit knowledge, as reflected in more recent literature, supports an enabling vision. Methodology: The paper uses a conceptual analysis methodology grounded in epistemology and knowledge studies. It reviews a set of historically important works in the field of knowledge management and identifies and analyzes their core concepts and conceptual structure. Contribution: The paper shows that KM has had a faulty conception of tacit knowledge from its origins and that this conception lends credibility to an extractive vision supportive of replacement automation strategies. The paper then shows that recent scholarship on tacit knowledge and related forms of reasoning, in particular, abduction, provide a more theoretically robust conception of tacit knowledge that supports the centrality of human knowledge and knowledge workers against replacement automation strategies. The paper provides new insights into tacit knowledge and human reasoning vis-à-vis knowledge work. It lays the foundation for KM as a field with an independent, ethically defensible approach to technology-based business strategies that can leverage AI without becoming a merely supporting field for AI. Findings: Fuller’s argument is forceful when updated with examples from current AI technologies such as deep learning (DL) (e.g., image recognition algorithms) and large language models (LLMs) such as ChatGPT. Fuller’s view that KM presupposed a specific epistemology in which knowledge can be extracted into embodied (computerized) but disembedded (decontextualized) information applies to current forms of AI, such as machine learning, as much as it does to expert systems. Fuller’s concept of expertise is narrower than necessary for the context of KM but can be expanded to other forms of knowledge work. His account of the social dynamics of expertise as professionalism can be expanded as well and fits more plausibly in corporate contexts. The concept of tacit knowledge that has dominated the KM literature from its origins is overly simplistic and outdated. As such, it supports an extractive view of KM. More recent scholarship on tacit knowledge shows it is a complex and variegated concept. In particular, current work on tacit knowledge is developing a more theoretically robust and detailed conception of human knowledge that shows its centrality in organizations as a driver of innovation and higher-order thinking. These new understandings of tacit knowledge support a non-extractive, human enabling view of KM in relation to AI. Recommendations for Practitioners: Practitioners can use the findings of the paper to consider ways to implement KM technologies in ways that do not neglect the importance of tacit knowledge in automation projects (which neglect often leads to failure). They should also consider how to enhance and fully leverage tacit knowledge through AI technologies and augment human knowledge. Recommendation for Researchers: Researchers can use these findings as a conceptual framework in research concerning the impact of AI on knowledge work. In particular, the distinction between replacement and enabling technologies, and the analysis of tacit knowledge as a structural concept, can be used to categorize and analyze AI technologies relative to KM research objectives. Impact on Society: The potential of AI on employment in the knowledge economy is a major issue in the ethics of AI literature and is widely recognized in the popular press as one of the pressing societal risks created by AI and specific types such as generative AI. This paper shows that KM, as a field of research and practice, does not need to and should not add to the risks created by automation-replacement strategies. Rather, KM has the conceptual resources to pursue a (human) knowledge enablement approach that can stand as a viable alternative to the automation-replacement vision. Future Research: The findings of the paper suggest a number of research trajectories. They include: Further study of tacit knowledge and its underlying cognitive mechanisms and structures in relation to knowledge work and KM objectives. Research into different types of knowledge work and knowledge processes and the role that tacit and explicit knowledge play. Research into the relation between KM and automation in terms of KM’s history and current technical developments. Research into how AI arguments knowledge works and how KM can provide an enabling framework.

Aim/Purpose: This research aims to develop a smart agricultural knowledge management framework to empower emergent farmers and extension officers (advisors to farmers) in developing countries as part of a smart farming lab (SFL). The framework utilizes knowledge objects (KOs) to capture information and knowledge of different forms, including indigenous knowledge. It builds upon a foundation of established agricultural knowledge management (AKM) models and serves as the cornerstone for an envisioned SFL. This framework facilitates optimal decision support by fostering linkages between these KOs and relevant organizations, knowledge holders, and knowledge seekers within the SFL environment. Background: Emergent farmers and extension officers encounter numerous obstacles in their knowledge operations and decision-making. This includes limited access to agricultural information and difficulties in applying it effectively. Many lack reliable sources of support, and even when information is available, understanding and applying it to specific situations can be challenging. Additionally, extension offices struggle with operational decisions and knowledge management due to agricultural organizations operating isolated in silos, hindering their access to necessary knowledge. This research introduces an SFL with a proposed AKM process model aimed at transforming emergent farmers into smart, innovative entities by addressing these challenges. Methodology: This study is presented as a theory-concept paper and utilizes a literature review to evaluate and synthesize three distinct AKM models using several approaches. The results of the analysis are used to design a new AKM process model. Contribution: This research culminates in a new AKM process framework that incorporates the strengths of various existing AKM models and supports emergent farmers and extension officers to become smart, innovative entities. One main difference between the three models analyzed, and the one proposed in this research, is the deployment and use of knowledge assets in the form of KOs. The proposed framework also incorporates metadata and annotations to enhance knowledge discoverability and enable AI-powered applications to leverage captured knowledge effectively. In practical terms, it contributes by further motivating the use of KOs to enable the transfer and the capturing of organizational knowledge. Findings: A model for an SFL that incorporates the proposed agricultural knowledge management framework is presented. This model is part of a larger knowledge factory (KF). It includes feedback loops, KOs, and mechanisms to facilitate intelligent decision-making. The significance of fostering interconnected communities is emphasized through the creation of linkages. These communities consist of knowledge seekers and bearers, with information disseminated through social media and other communication integration platforms. Recommendations for Practitioners: Practitioners and other scholars should consider implementing the proposed AKM process model as part of a larger SFL to support emergent farmers and extension officers in making operational decisions and applying knowledge management strategies. Recommendation for Researchers: The AKM process model is only presented in conceptual form. Therefore, researchers can practically test and assess the new framework in an agricultural setting. They can also further explore the potential of social media integration platforms to connect knowledge seekers with knowledge holders. Impact on Society: The proposed AKM process model has the potential to support emergent farmers and extension officers in becoming smart, innovative entities, leading to improved agricultural practices and potentially contributing to food security. Future Research: This paper discusses the AKM process model in an agrarian setting, but it can also be applied in other domains, such as education and the healthcare sector. Future research can evaluate the model’s effectiveness and explore and further investigate the semantic web and social media integration.

There is a need to emphasise and educate future business leaders on emerging technologies' disruptive and transformative impact on business processes. Allen (2020) suggests the need for a digital mindset and tech literacy in business management education. In our study, we define cyber literacy and cyber ethical mindset emphasising the importance of informing future leaders in business schools about the ethical dilemmas arising while using these emerging technologies. Additionally, we highlight various ethical pitfalls of using technologies enabling disruption (TED). Further, we contribute to the understanding of cyber literacy, cyber ethics and business ethics, how to incorporate cyber ethics into the management curriculum, and why there is a need to integrate cyber ethics into management education.

Since the development of Open Educational Resources (OERs), different models regarding the usage of these resources in education have appeared in the literature. Wiley’s 4-Rs model is considered to be one of the leading models. Research based on Wiley’s model shows that using materials without making changes is the most common use. Compared to the extensive literature regarding OER usage in education, the literature barely deals with OER usage by instructional designers or training managers in corporations. The purpose of this research is to examine the OER usage of these two stakeholders, distinguishing between Little and Big OER repositories, in which Little OER repositories such as YouTube and Wikipedia aren’t necessarily designed to fulfill educational purposes. Findings show that these stakeholders almost use only Little repositories and that their usage level is higher than what is documented in the literature: they mostly Revise–modify the form of the resource, and Remix–combine different resources to create new ones. These differences can be explained by the fact that materials from Little OER repositories are raw materials, requiring further editing and adjustment. Significant differences between instructional designers’ and training managers’ usage of OERs were found regarding the Reuse level of resources from internal repositories and the Google Images repository, and the frequency of this Reuse.

There is a growing interest in the assessment of tangible skills and competence. Specifically, there is an increase in the offerings of competency-based assessments, and some academic institutions are offering college credits for individuals who can demonstrate adequate level of competency on such assessments. An increased interest has been placed on competency-based computer simulations that can assist learners to gain tangible skills. While computer simulations and competency-based projects, in general and particularly in management, have demonstrated great value, there are still limited empirical results on their benefits to e-learners. Thus, we have developed a quasi-experimental research, using a survey instrument on pre- and post-tests, to collect the set of 12 management skills from e-learners attending courses that included both competency-based computer simulations and those that didn’t. Our data included a total of 253 participants. Results show that all 12 management skills measures demonstrated very high reliability. Our results also indicate that all 12 skills of the competency-based computer simulations had higher increase than those that didn’t. Analyses on the mean increases indicated an overall statistically significant difference for six of the 12 management skills enhancements between the experimental and control groups. Our findings demonstrate that overall computer simulations and competency-based projects do provide added value in the context of e-learning when it comes to management skills.

The characteristics of successful MOOCs were explored in this study. Thousands of student reviews regarding five xMOOCs (Massive Open Online Course) in the fields of software, science, and management were extracted from the Coursetalk website and analyzed by quantitative and qualitative methods using the Garrison, Anderson, and Archer (2000) Community of Inquiry (CoI) model. The 14 characteristics found to contribute to the success of MOOCs (e.g., teacher, atmosphere, exercise) were partitioned into the teaching, social, and cognitive presence elements. In addition, cluster analysis revealed five types of learners, based on the characteristics they mentioned for course success: atmosphere, exercise, teacher, exam, and unspecified. This divides learners into groups that may prefer social, cognitive, or teaching presence. The findings of this study negate the perception that xMOOCs mostly contain teaching presence elements. This research contributes to the understanding of characteristics that contribute to successful MOOCs and sheds light on the students, too. Listening to the voices of the students and the types of characteristics that they chose to mention, enables further exploration of their preferences and expectations regarding MOOCs and, accordingly, to future adaptation between students’ preferences and MOOC characteristics.

Aim/Purpose: This paper presents some of the issues that academia faces in both the detection of plagiarism and the aftermath. The focus is on the latter, how academics and educational institutions around the world can address the challenges that follow the identification of an incident. The scope is to identify the need for and describe specific strategies to efficiently manage plagiarism incidents. Background: Plagiarism is possibly one of the major academic misconduct offences. Yet, only a portion of Higher Education Institutes (HEIs) appear to have well developed policies and procedures aimed at dealing with this issue or to follow these when required. Students who plagiarize and are not caught pose challenges for academia. Students who are caught pose equal challenges. Methodology: Following a literature review that identifies and describes the extent and the seriousness of the problem, procedures and strategies to address the issue are recommended, based on the literature and best practices. Contribution: The paper alerts academics regarding the need for the establishment of rigorous and standardized procedures to address the challenges that follow the identification of a plagiarism incident. It then describes how to streamline the process to improve consistency and reduce the errors and the effort required by academic staff. Recommendations for Practitioners: To ensure that what is expected to happen takes place, HEIs should structure the process of managing suspected plagiarism cases. Operationalization, workflow automation, diagrams that map the processes involved, clear in-formation and examples to support and help academics make informed and consistent decisions, templates to communicate with the offenders, and data-bases to record incidents for future reference are strongly recommended. Future research: This paper provides a good basis for further research that will examine the plagiarism policy, the procedures, and the outcome of employing the procedures within the faculties of a single HEI, or an empirical comparison of these across a group of HEIs. Impact on Society: Considering its potential consequences, educational institutions should strive to prevent, detect, and deter plagiarism – and any type of student misconduct. Inaction can be harmful, as it is likely that some students will not gain the appropriate knowledge that their chosen profession requires, which could put in danger both their wellbeing and the people they will later serve in their careers.

Aim/Purpose: The purpose of this study was to gain an understanding of faculty and student perceptions of the importance of resource, interpersonal, information, systems, and technology management competencies in the hospitality industry Background: The increasing complexity and technological dependency of the diverse hospitality and tourism sector raises the skill requirements needed, and expected, of new hires making education and competency development a strategic priority. Identifying the skills needed for hospitality graduates to succeed in a sector that is continuously being impacted by digitalization and globalization must be a continual process predicated on the desire to meet ever-changing industry needs. This study seeks to update and further explore an investigation started a decade ago that examined the skills and competencies valued by hiring managers in the hospitality industry. Methodology: The Secretary’s Commission on Achieving Necessary Skills (SCANS), comprised of representatives from business, labor, education, and government, developed the framework, of workplace competencies and foundation skills used in this study. This research used a survey methodology for data collection and descriptive and inferential statistical methods during the analyses. The data for this study were collected from faculty, staff, hospitality industry stakeholders, and students of a Department of Hospitality & Tourism Management located at a small eastern Historically Black University (HBU). An electronic survey was sent to169 respondents and a total of 100 completed surveys were received for an overall return rate of 59%. Contribution: This study provides research on a population (first-generation minority college students) that is expanding in numbers in higher education and that the literature, reports as being under-prepared for academic success. This paper is timely and relevant and can be used to inform hospitality educators so that they can best meet the needs of their students and the companies looking to hire skilled graduates. Findings: The findings of this study indicate there is inconsistent agreement among academicians and students regarding the importance of SCANS-specific competencies in hospitality graduates. At the same time, there is no argument that industry skills will be critical in the future of hospitality graduates. Overwhelmingly, participating students and faculty found all of the SCANS competencies important with the highest ranked competencies being interpersonal skills, which, given the importance of teamwork, customer service skills, leadership, and working with cultural diversity in the hospitality industry, was expected. Additionally, participating students indicated their strong agreement that internships are effective at building professional skills. Finally, the hospitality students included in this study who were enrolled in a skill-based curriculum were confident that their program is preparing them with the necessary skills and competencies that they will need for their future careers. Recommendations for Practitioners: Higher education hospitality programs should be exploring the skills valued by industry, teaching faculty, and the students to see if they are being satisfied. Recommendation for Researchers: This research should be expanded to additional institutions across the United States as well as abroad. This particular research protocol is easily replicated and can be duplicated at both minority and majority serving institutions enabling greater comparisons across groups. Impact on Society: Several reports identify gaps in the 21st century skills required for the workplace and the effectiveness of higher education in preparing graduates for the workforce. This study helps to propel this discussion forward with relevant findings and a research methodology that is easily replicable. Future Research: A follow-up study of employers is currently being conducted.