Sports brands partnering to bring a higher level of customization to endurance athletes

Velo Optics, L.L.C. is pleased to announce the availability of a unique, high quality eyeglass frame and sunglass line designed by two practicing eye doctors working to create comfortable, classic iconic American eyewear.

San Diego Area Catholic Church Officially Consecrates First Woman Bishop in US History.

Autoglass and Brake have teamed up for a national campaign promoting road safety.

Autoglass is to be preferred supplier of Inchcape Fleet Solutions, providing its expert service to a fleet of over 50,000 vehicles.

SmartBuyGlasses has recently promoted a virtual eye clinic introducing Lens Scanner powered by 6 over 6.

A Unique and Wholly Immersive Theatrical Experience, "Found" Will Run September 25 through October 31, 2019 at The Cell Theatre in NYC

Mr. Freed has been endorsed by Marquis Who's Who as a leader in fine arts and museum administration

SIGONNA specializes in designing and delivering high quality eyeglasses string holders for both professional and day to day usage.

Reef fishing net transformed from "dangerous" to "desirable" ReefCycle sunglasses

Susanne Bruckmüller, research associate at the Universität Erlangen-Nürnberg and coauthor of the HBR article "How Women End Up on the 'Glass Cliff'."

While sheltering-at-home in UPSTATE NEW YORK, GLASSNOTE Head Of Promotion NICK PETROPOULOS sent KCMP (89.3 THE CURRENT)/MINNEAPOLIS PD JIM MCGUINN a song of guitar riffs and an email about … more

St.Michael's Hospital Walkway to Li Ka Shing Knowledge Institute....

The Johnson County Board of Supervisors consists of five at-large members. Recently some people in the rural community have advocated for a board elected from districts within the county. A House Study Bill a few years ago would have required counties with a population greater than 150,000 to elect supervisors from districts, though a similar bill had failed earlier.

While districting a board of supervisors may appear to provide more representation to rural residents, the opposite would result. Currently, any resident anywhere in the county has five supervisors to whom they can communicate their needs. With districts, residents would have only one supervisor representing them.

There are many reasons electing supervisors from districts is not a good idea for Johnson County. But here is why, in fact, it’s a bad idea.

In Johnson County, our current practice for funding projects is determined using a needs assessment approach. This can be seen in our Five-Year Road Plan and works quite well. It is a triage of sorts, with the greatest need addressed first. With districts, it would become necessary to rotate projects based on the district in which it is located rather than the greatest need.

Imagine what might have happened in the 2016 emergency situation on the Highway 965 bridge over the Iowa River! During routine bridge inspections, county engineers determined repairs to that bridge to be our county’s greatest road need. It was an issue of public safety. Our at-large Board of Supervisors approved that project for immediate repairs.

Had we had districts, that project would land within my district and might have been put on hold, waiting for my district to have its turn at a big roads project. Just a couple years later, Swan Lake Road bridge over I-380, also in “my district” was deemed in need of immediate repair. While there is not a lot of traffic on that bridge, it is an essential route for farmers in the area. The closure was inconvenient during one farming season, but is now open and in good repair.

With districts, that bridge, in particular, would still be closed because it would be unfair for one district to have two big bridge repair jobs done before other districts had one done.

There are many other reasons why Johnson County’s Board of Supervisors should continue as an at-large body. Each county should be allowed to determine its own board of supervisors structure.

Lisa Green-Douglass is a candidate in the Democratic primary for Johnson County Board of Supervisors.

In today’s tutorial, we’re going to take a quick look behind the process of creating a pair of reading glasses icon, and see how we can take some simple shapes and turn them into a finished usable product. So, assuming you already have the software running, let’s jump straight into it! Tutorial Details: Reading Glasses […]

The post How to – Create a Pair of Reading Glasses Icon appeared first on Vectips.

Monty Spears didn't know it at the time, but the last time he'd see his father would be through the window at the Life Care Center of Lewiston.…

Formaldehyde-free binder compositions are described that include an aldehyde or ketone, a nitrogen-containing salt of an inorganic acid, and an acidic compound. The acidic compound may be an organic acid, such as maleic acid or citric acid among others. The acidic compound is supplied in quantities that lower the pH of the binder composition to about 5 or less. The binder compositions may be used in methods of binding fiberglass and the resulting fiberglass products have an improved tensile strength due to the addition of the acidic compound.

The object of the present invention is to provide an intermediate film for laminated glass which prevents reductions of transparency and appearance property caused by permeation of moisture and water. The above object is attained by the present invention, i.e., a composition for forming an intermediate film for a laminated glass which comprises ethylene-vinyl acetate copolymer and a compound having alkyleneoxy group. The composition of the present invention enables the formation of an intermediate film for a laminated glass that restrains white spots from occurring by the permeation of moisture and water.

The invention relates to glasses for use in solid laser applications, particularly short-pulsed, high peak power laser applications. In particular, the invention relates to a method for broadening the emission bandwidth of rare earth ions used as lasing ions in solid laser glass mediums, especially phosphate-based glass compositions, using Nd and Yb as co-dopants. The invention further relates to a laser system using a Nd-doped and Yb-doped phosphate laser glass, and a method of generating a laser beam pulse using such a laser system.

Disclosed are a vacuum glass panel and a manufacturing method of the same. The vacuum glass panel according to the present invention includes a first glass plate, a second glass plate facing the first glass plate with a vacuum space therebetween, an edge of the second glass plate being in contact with the first glass plate, and a plurality of spacers disposed between the first glass plate and the second glass plates to separate the first glass plate and the second glass plate from each other. The plurality of spacers are formed of a glass including alumina (Al2O3) particles and silica (SiO2) particles.

Embodiments are directed to glass frits containing phosphors that can be used in LED lighting devices and for methods associated therewith for making the phosphor containing glass frit and their use in glass articles, for example, LED devices.

There is provided a glass for chemical strengthening having a black color tone and excelling in characteristics preferred for the purposes of housing or decoration of an electronic device, that is, bubble quality, strength, and light transmittance characteristics. A glass for chemical strengthening contains, in mole percentage based on following oxides, 55% to 80% of SiO2, 3% to 16% of Al2O3, 0% to 12% of B2O3, 5% to 16% of Na2O, 0% to 4% of K2O, 0% to 15% of MgO, 0% to 3% of CaO, 0% to 18% of ΣRO (where R represents Mg, Ca, Sr, Ba or Zn), 0% to 1% of ZrO2, and 0.1% to 7% of a coloring component having at least one metal oxide selected from the group consisting of oxides of Co, Mn, Fe, Ni, Cu, Cr, V and Bi.

A method for manufacturing a plurality of glass microspheres comprises: melting a batch into a first glass melt in a melter system, processing the first glass melt into a second glass, pulverizing the second glass into a plurality of glass fragments, thermally processing the plurality of glass fragments into a plurality of glass microspheres, providing at least one of a plurality of redox reactions and a plurality of events in at least one of the first glass melt and a melt of the second glass, and the plurality of redox reactions and the plurality of events are induced by a plurality of redox active group (RAG) components.

A glass for a magnetic recording medium substrate permitting the realization of a magnetic recording medium substrate affording good chemical durability and having an extremely flat surface, a magnetic recording medium substrate comprised of this glass, a magnetic recording medium equipped with this substrate, and methods of manufacturing the same. The glass is an oxide glass not including As or F.

A glass ceramic as cooktop for induction heating having improved colored display capability and heat shielding is provided. The cooktop includes a transparent, dyed glass ceramic plate having high-quartz mixed crystals as a predominant crystal phase. The glass ceramic contains none of the chemical refining agents arsenic oxide and/or antimony oxide and has a transmittance values greater than 0.4% at at least one wavelength in the blue spectrum between 380 and 500 nm, a transmittance >2% at 630 nm, a transmittance of less than 45% at 1600 nm, and a light transmittance of less than 2.5% in the visible spectrum.

This optical glass contains, as represented by mol %, 18 to 38% P2O5, 0 to 15% B2O3, 23 to 40% P2O5+B2O3, 4 to 28% Nb2O5, 0 to 20% TiO2, 10 to 30% Nb2O5+TiO2, 15 to 35% Li2O+Na2O+K2O, and 21 to 38% ZnO, but does not contain BaO, WO3, Bi2O3 or SiO2, and the ratio of the mol % of ZnO to the total mol % of Li2O+Na2O+K2O (i.e., ZnO/(Li2O+Na2O+K2O)) is 0.8 to 2.0.

Provided is a light-emitting glass which is applicable to, e.g., white illuminators including a light-emitting diode as a light source, and which emits light of a warm white color when irradiated with near ultraviolet light and combines long-term weatherability with high heat resistance; a light-emitting device containing same and a process for producing same. The light-emitting glass includes, as the base glass, borosilicate or silicate glass having a separated-phase structure, whereby the base glass is efficiently doped with, for example, transition metal ion clusters which emit light of a warm white color upon irradiation with near ultraviolet light. With this glass, it is possible to attain increases in excitation wavelength and emission wavelength. The glass thus emits, based on a multiple scattering effect, high-intensity light of a warm white color upon irradiation with near ultraviolet light.

A highly refractive and highly transparent optical glass is provided. The use of such a glass, optical elements and processes for producing the glass or the optical elements are also provided.

To provide a method for producing a magnetic disk, whereby a magnetic recording layer is formed at a high temperature. A method for producing a magnetic disk, which comprises a step of forming a magnetic recording layer on a glass substrate having a temperature of at least 550° C., wherein the glass substrate comprises, as represented by mol percentage, from 62 to 74% of SiO2, from 6 to 18% of Al2O3, from 2 to 15% of B2O3 and from 8 to 21%, in total, of at least one component selected from MgO, CaO, SrO and BaO, provided that the total content of the above seven components is at least 95%, and further contains less than 1%, in total, of at least one component selected from Li2O, Na2O and K2O, or contains none of these three components.

A plurality of soda-lime glass batch materials are formed into granules that include a core and a shell surrounding the core. The core comprises a first portion of the plurality of glass batch materials, and the shell comprises a remaining portion of the plurality of glass batch materials. These core-shell granules can be melted in a glass furnace to produce molten soda-lime glass in less time and at a lower temperature than conventional soda-lime glass batch preparations.

Provided is an alkali-free glass, which is substantially free of alkali metal oxides, and has a strain point of more than 680° C., an average coefficient of thermal expansion in the temperature range of 30 to 380° C. of 40 to 55×10−7/° C., and a liquidus temperature of less than 1,200° C. Further, the alkali-free glass comprises, as a glass composition in terms of mass %, 55 to 70% of SiO2, 10 to 20% of Al2O3, 0.1 to 4.5% of B2O3, 0 to 1% of MgO, 5 to 15% of CaO, 0.5 to 5% of SrO, and 5 to 15% of BaO.

A photovoltaic cell, for example a thin-film photovoltaic cell, having a substrate glass made of aluminosilicate glass, has a glass composition which has SiO2 and Al2O3 as well as the alkali metal oxide Na2O and the alkaline earth oxides CaO, MgO, and BaO, and optionally further components. The glass composition includes 10 to 16 wt.-% Na2O, >0 to 1 to 10 wt.-% BaO, and the ratio of CaO:MgO is in the range of 0.5 to 1.7. The aluminosilicate glass used is crystallization stable because of the selected quotient of CaO/MgO and has a transformation temperature >580° C. and a processing temperature

To provide a glass ceramic body wherein the deterioration of the reflectance due to black coloration is suppressed, and the unevenness of the firing shrinkage is suppressed. A glass ceramic body comprising a glass matrix and alumina particles dispersed therein, wherein the glass matrix is not crystallized, a ceramic part composed of the dispersed alumina particles has an α-alumina crystal structure and a crystal structure other than the α-alumina crystal structure.

The present invention relates to a chemically strengthened glass for a display device, having a visible light transmittance Tva of 50% or more and less than 91% at a thickness of 1 mm using A light source, and an excitation purity Pe of less than 0.5% at a thickness of 1 mm.

An alumino-borosilicate glass for the confinement, isolation of a radioactive liquid effluent of medium activity, and a method for treating a radioactive liquid effluent of medium activity, wherein calcination of said effluent is carried out in order to obtain a calcinate, and a vitrification adjuvant is added to said calcinate.

A glass composition including SiO2 in an amount from 74.5 to 80.0% by weight, Al2O3 in an amount from 5.0 to 9.5%>> by weight, MgO in an amount from 8.75 to 14.75% by weight, CaO in an amount from 0.0 to 3.0% by weight, Li2O in an amount from 2.0 to 3.25% by weight, Na2O in an amount from 0.0 to 2.0% by weight is provided. Glass fibers formed from the inventive composition may be used in applications that require high strength, high stiffness, and low weight. Such applications include woven fabrics for use in forming wind blades, armor plating, and aerospace structures.

A substrate for p-Si TFT flat panel displays made of a glass having a high low-temperature-viscosity characteristic temperature and manufactured while avoiding erosion/wear of a melting tank during melting through direct electrical heating. The glass substrate comprises 52-78 mass % of SiO2, 3-25 mass % of Al2O3, 3-15 mass % of B2O3, 3-20 mass % of RO, wherein RO is total amount of MgO, CaO, SrO, and BaO, 0.01-0.8 mass % of R2O, wherein R2O is total amount of Li2O, Na2O, and K2O, and 0-0.3 mass % of Sb2O3, and substantially does not comprise As2O3, wherein the mass ratio CaO/RO is equal to or greater than 0.65, the mass ratio (SiO2+Al2O3)/B2O3 is in a range of 7-30, and the mass ratio (SiO2+Al2O3)/RO is equal to or greater than 5. A related method involves melting glass raw materials blended to provide the glass composition; a forming step of forming the molten glass into a flat-plate glass; and an annealing step of annealing the flat-plate glass.

According to one embodiment, a glass container may include a body formed from a Type I, Class B glass composition according to ASTM Standard E438-92. The body may have an inner surface, an outer surface and a wall thickness extending between the outer surface and the inner surface. The body may also include a compressively stressed layer extending into the wall thickness from at least one of the outer surface and the inner surface. A lubricous coating may be positioned on at least a portion of the outer surface of the body, wherein the outer surface of the body with the lubricous coating has a coefficient of friction less than or equal to 0.7.

A tempered glass substrate has a compression stress layer on a surface thereof, and has a glass composition comprising, in terms of mass %, 40 to 70% of SiO2, 12 to 21% of Al2O3, 0 to 3.5% of Li2O, 10 to 20% of Na2O, 0 to 15% of K2O, and 0 to 4.5% of TiO2, wherein the tempered glass substrate has a plate thickness of 1.5 mm or less, and an internal tensile stress in the tempered glass substrate is 15 to 150 MPa.

Provided is an optical glass that has desired optical properties, superior resistance to devitrification, and superior mass productivity. An optical glass is made of a SiO2—Nb2O5—TiO2-based glass having a refractive index (nd) of 1.75 to 1.95 and an Abbe's number (νd) of 15 to 35 and has an operation temperature range (ΔT=(temperature at 100.5 poise)−(liquidus temperature)) of 20° C. or more. The optical glass preferably contains, in percent by mass, 15% to 45% SiO2, 15% to 40% (but excluding 40%) Nb2O5 and 1% to 30% TiO2 as glass components.

An optical glass including B3+, La3+ and Nb5+ as cationic components constituting the glass, wherein the optical glass satisfies the following expressions represented in cation percentages: 10 cat. %≦B3+≦50 cat. %;40 cat. %≦La3+≦65 cat. %;0 cat. %≦Nb5+≦40 cat. %;80 cat. %≦(total amount of B3++La3++Nb5+)≦100 cat. %; and0 cat. %≦Si4+≦10 cat. %;0 cat. %≦Ge4+≦5 cat. %;0 cat. %≦Mg2+≦5 cat. %;0 cat. %≦Ba2+≦10 cat. %;0 cat. %≦Ca2+≦10 cat. %;0 cat. %≦Sr2+≦10 cat. %;0 cat. %≦Zn2+≦20 cat. %;0 cat. %≦W6+≦5 cat. %;0 cat. %≦Zr4+≦5 cat. %;0 cat. %≦Ti4+≦5 cat. %;0 cat. %≦Bi3+≦5 cat. %;0 cat. %≦Ta5+≦10 cat. %;0 cat. %≦(total amount of Y3++Gd3+)≦20 cat. %; and0 cat. %≦(total amount of Yb3++Lu3+)≦10 cat. %.

A manufacturing method of a glass substrate for a magnetic disk is provided whereby nano pits and/or nano scratches cannot be easily produced in polishing a principal face of a glass substrate using a slurry containing zirconium oxide as an abrasive. The manufacturing method of a glass substrate for a magnetic disk includes, for instance, a polishing step of polishing a principal face of a glass substrate using a slurry containing, as an abrasive, zirconium oxide abrasive grains having monoclinic crystalline structures (M) and tetragonal crystalline structures (T).

An LCD is integrated with the cover glass of a wrist watch radio paging receiver which indicates the time data with a dial plate and hands, and a message is displayed on the cover glass by controlling this LCD. In this message display, the parts of the characters indicating the message are made transparent and the remaining parts intercept light. In this manner, message display is made possible by the difference in light transmissivity.

A tool (1000) includes a mold defining a cavity (1002). The cavity can be for receiving a glass layer (402). A floating core insert (1001) can be placed in the cavity to apply a preloading force against a first major face of the glass layer, preclude an overmolding operation on the first major face, and allow overmolding only on minor faces of the glass layer when polymeric material (1100) is injected into runners (1018,1019,1020) of the tool.

Disclosed are an apparatus and a method for monitoring a glass plate polishing state. The apparatus may include a location measuring unit for measuring a location on a glass plate being polished by a polishing machine, a current measuring unit for measuring an electric current flowing into the polishing machine, a memory unit for storing a reference value of the electric current flowing into the polishing machine for each polishing location of the glass plate, and a control unit for determining whether a polishing state is faulty, by comparing a value of the electric current measured by the current measuring unit for each polishing location measured by the location measuring unit with a corresponding reference value of the electric current stored in the memory unit for each polishing location.

Methods of shaping a glass sheet each include a step of removing a first portion of the glass sheet to form a first beveled surface. The methods further include the step of removing a second portion of the glass sheet to form a second beveled surface. The methods still further include the step of removing a third portion of the glass sheet comprising a remainder of an end surface of an edge portion of the glass sheet. In further examples, glass sheets are also provided with a first bevel surface intersecting a first glass-sheet surface and an apex surface, and a second bevel surface intersecting a second glass-sheet surface and the apex surface. The glass sheet exhibits a probability of failure of less than 5% at an edge stress of 135 MPa.

A tool changing device for a cutting head of a machine for cutting flat glass sheets, the tool changing device comprising: a bridge; a carriage for supporting the cutting head, the carriage being slidingly attached to the bridge for translation along the bridge; an electric motor that provides for translational motion of the carriage with respect to the bridge; and a tool supporting slider, which is configured to support a plurality of tools such that the tools can be automatically exchanged between the tool supporting slider and the cutting head, the tool supporting slider coupled, by way of reversible fixing elements to the cutting head supporting carriage during work by the cutting head, and wherein the tool supporting slider is uncoupled from the cutting head supporting carriage during tool changing operations.

An aspect of the present invention relates to glass for a magnetic recording medium substrate, which includes essential components in the form of SiO2, Li2O, Na2O, and one or more alkaline earth metal oxides selected from the group consisting of MgO, CaO, SrO, and BaO, wherein a molar ratio of a content of MgO to a combined content of MgO, CaO, SrO, and BaO (MgO/(MgO+CaO+SrO+BaO)) is equal to or greater than 0.80, and which has a Young's modulus of equal to or greater than 80 GPa, and a glass transition temperature of equal to or greater than 620° C.

In various embodiments, an electrode has a shaft extending from an electrode head and a cooling passage extending from an open end disposed at an attachment end of the shaft to a closed end disposed within the electrode head.

An electric glass hot shop system is described herein that has at least one electrically powered heating unit (e.g., electric furnace, electric glory hole, electric pipe warmer, electric color box, electric annealer, electric crucible kiln) used in the processing of glass.