A rotary evaporator comprising a motor, a rotary joint movably inserted to a motor rotor of the motor by a sleeve in an axial direction, a collection flask attached to the rotary joint at one end of the joint, with a condenser attached to the other end of the joint. The condenser is adapted to receive a cooling coil from an immersion cooler. The cooling coil is attached to the base unit of the immersion cooler via an insulated hose. The rotary evaporator is adapted to provide various ways to remove heat from the flask in the water bath, whether by mechanically lowering the water bath, dropping fluid from the bath into an underlying reservoir, or raising and lowering the rotary evaporator out of the bath. Where the rotary evaporator is raised and lowered, the immersion cooler can remain in place if the hose connecting the base unit to the cooling coil is sufficiently long, or the condenser includes a flexible portion that accommodates the upward and downward movement.

Mechanical visbreaking and pyrolysis between counter-rotating coaxial centrifugal impellers in a continuous radial counterflow process minimizes wastewater discharges. In one example, a cataclastic shear retort comminutes, shear thins, and shear heats an axial feed, such as tar sand, oil shale, coal tailings, distillation bottoms, or lignite. Pyrolyzing the feedstock in this shear retort yields a product stream of gases, naphthas, and oils which first mixes with the feedstock and then is axially extracted, while spent solids are simultaneously extruded from the periphery as coked devolatilized residue, such as char sand for upgrading soil to terra preta. Recirculation of shear-heated solids in long residence time within the shear retort brings heat from the spent solids at the periphery to the feedstock without an external heated sand loop. CO2 emissions from combustion to heat water for oil extraction are eliminated.

An evaporative desalination device includes a multi stage vapor generator that generates vapor by passing a hot water supply pipe successively through a plurality of vapor generators to evaporate sea water inside thereof, a multi effect vapor generator that uses vapor in the respective vapor generators as heat source and forms a plurality of evaporator groups which can adjust a number of evaporators disposed inside the respective evaporator groups and produce fresh water according to amounts of supplied vapor to evaporate sea water in the evaporator groups on an outer circumference surface of an evaporation tube by heat of vapor flowing in the evaporation tube, and a discharge unit that condenses vapor in the multi effect generator by sea water to discharge fresh water in liquid state, and returns and supplies portions of discharged sea water to the multi stage vapor generator and the multi effect evaporator.

Disclosed herein is a system comprising an evaporation unit comprising a first heat exchanger in fluid communication with a second heat exchanger; where the first heat exchanger is operative to heat an effluent stream comprising an amine solvent and/or amine byproducts and water and to discharge the effluent stream to the second heat exchanger; where the second heat exchanger is operative to convert the effluent stream into a distillate stream and a concentrate stream; and a reverse osmosis unit in fluid communication with the evaporation unit; where the reverse osmosis unit comprises a first reverse osmosis unit that is operative to receive the distillate stream and to separate water from byproducts of the amine solvent such that the water has a purity of greater than 95%, based on the weight of the distillate stream.

Membranes for membrane distillation include at least one hollow fiber porous hydrophobic membrane, the at least one membrane including carbon nanotubes incorporated into the pore structure of the membrane. Membrane distillation systems may include a heat exchanger operably connected to a hollow fiber membrane module with one or more membranes including carbon nanotubes. Methods of solvent removal, sample preconcentration and desalination employing hollow fiber porous hydrophobic membranes with carbon nanotubes are disclosed.

A device (1) comprises a source (20) for emitting ultraviolet light, an inlet (30) for letting in fluid to the device (1), an outlet (40) for letting out fluid from the device (1), and means (51, 52) for performing a straightening action of a flow of fluid through the device (1). The flow straightening means comprise at least one flow straightening element (51, 52) having inlet openings for letting in fluid at one side and outlet openings for letting out fluid at another side, wherein each inlet opening is in communication with a plurality of outlet openings, and wherein the element (51, 52) comprises a maze of randomly arranged, interconnected holes. In such a structure, a water element that is moving from one side of the element (51, 52) to another side may take one of various paths, as a result of which variations in inlet conditions can be dampened.

A double drum traction winch supporting a first and second rotatable drum is provided. The circumferential surface of each drum is provided with circumferential grooves perpendicular to the rotational axis of the drum. The grooves of each drum are subdivided in a first set of grooves for guiding a first wire and a second set of grooves for guiding a second wire. The grooves of the first set alternate with grooves of the second set such that the circumferential surface of each drum is provided with multiple grooves of the first group, each interpositioned between two grooves of the second group. Therefore the traction winch is capable of cooperating with a first wire in the first set of grooves or with a second wire in the second set of grooves, wherein both wires differ in type of material and/or cross section and/or maximum tensile strength.

A power winch horizontal-pull clutch device provides dynamic forces from a power source and uses a deceleration device to retard the force transmission to a cable pulley for releasing and rewinding a steel cable on the cable pulley. A connecting slot is formed on a casing of the deceleration device. The deceleration device includes an outer ring body and at least one insert slot formed on an external surface. The power winch includes a clutch device for selectively fixing the connecting slot to the insert slot to transmit the dynamic force from the deceleration device to the cable pulley. The clutch device is a sealed assembly and a control handle is provided for making a horizontal movement to achieve the clutching effect and prevent water, dust or other foreign matters from entering into the clutch device, damaging components, causing failure or malfunction, or clamping an operator's hand or foreign matters.

A tensioning assembly having a drive pulley, a tension pulley and a tension adjustment system is provided. The drive pulley has a first drive pulley channel and a second drive pulley channel. The tension pulley has a first tension pulley channel and a second tension pulley channel. The second tension pulley channel is aligned with the first drive pulley channel. The first drive pulley channel and the second drive pulley channel of the drive pulley and the first tension pulley channel and a second tension pulley channel of the tension pulley are configured and arranged to engage and route an endless looped member. The tension adjustment system is coupled to adjust the distance between the drive pulley and the tension pulley to adjust the tension in the endless looped member in relation to the drive pulley.

An apparatus for repetitively lifting and lowering objects to create visual patterns having a plurality of units each with a motor, a rotary member, a cord attached at its distal end to the circumferential edge of the rotary member, an attaching mechanism affixed to the proximal end of the cord, and an object removably connected to the attaching mechanism. A computer or microprocessor is provided and programmed to selectively rotate the rotary members to move the objects between selected pre-determined positions along a generally vertical path of travel to establish a geometric pattern of repetitive elements.

An apparatuses and methods to release a chain. Apparatuses and methods include an electronic, mechanical, or electro-mechanical actuator system used to rotate a hooking arm. The actuator system includes an extendable piston. In some embodiments, the actuator system is hydraulic. In other embodiments, the actuator system is pneumatic.

A vehicle lift jack is provided. The jack may include: a frame; a lifting arm attached to the frame; a saddle attached to an end of the lifting arm; and a video camera attached to the jack and oriented to capture video footage of an area proximate to the saddle. A method of lifting a vehicle using a jack may be provided. The method may include: positioning the jack under the vehicle; capturing an image of the vehicle; viewing the image; determining the jack is in a desired position with respect to the vehicle; and raising the vehicle with the jack.

Described herein is a safety restraint mechanism for a mast assembly. The safety restraint mechanism comprises a tension line attached to a lever and a winch mechanism such that operation of the winch mechanism translates a carriage assembly along the mast. A cam brake including an engagement profile at a first end thereon is pivotally attached to the lever at a second end. The cam brake is also pivotally attached to the carriage assembly such that the engagement profile pivots into a brake position or a free lift position relative to a tension force acting on the lever. The lever is pivotally attached to the second end and includes a kickstand. The engagement profile having a protruded portion to abut the tubes in a brake position and a relief portion to space the cam brake from the tubes in a free lift position.

An apparatus of the present invention is used for movable objects upwardly and downwardly relative to a fixed surface. The apparatus includes a lifting device presented by a pair of blocks movable relative one and the other. A carriage device is supported by the blocks. The carriage device is connected to object to be lifted relative the fixed surface. An actuator is connected to the blocks. As the actuator moves the blocks relative one and the other, the blocks move above the carriage device relative the fixed surface at various distances lift and lower the objects.

An assembly includes a motor; a second motor; a planetary transmission coupled to the motor and the second motor, and a spool coupled to the transmission. The spool has an interior volume for receiving the motor, the second motor and the transmission, and the motor and the second motor are disposed or disposable entirely within the spool. The motor and the second motor are capable of being operated such that one of the motors is speed controlled, and the other motor is torque controlled.

The invention relates to a fixing element for locking a hinged hand crank on the input shaft of a support winch for semi-trailers, wherein the hand crank is fastened to the input shaft in an articulated manner and can pivot between at least one folded-in rest position and at least one folded-out usage position. According to the invention, said fixing element has a fastening section for fastening to the hand crank and a spring bar connected to the fastening section on which at least one locking section is formed, wherein the locking section reaches over the end face of the input shaft in a form-fitting manner in a folded-out usage position of the hand crank and is simultaneously pulled against said end face of the input shaft.

A foot actuated pivoting lever is provided. The lever may include: a lever member having two ends, one end configured to attach to a mechanism configured to receive an input from the lever member; and a pedal pivotally attached proximate to the other end of the lever member, wherein the pedal is configured to pivot between a first and a second position, wherein in the first position, the pedal lies on top of a section of the lever member and, in the second position, the pedal extends beyond the lever member. A mechanism for actuating a piston may be provided.

The invention relates to a three-armed pivot system, the two upper pivot arms having a V shape and representing part of a parallelogram, and the lower arm being a single, centrally situated pivot arm which represents the second part of the parallelogram. The active cylinder is assisted by a gas spring, and a personal protection safety net covers the gap between the vehicle and the platform, which may optionally be horizontally displaced. The active cylinder has a lift sensor which is connected to the controller, and the offset positioning of the active cylinder with respect to the bracket and of the fastening point to the pivot arm or support produces an improved lifting force.

A field-installable pulling eye and a method for providing and using the same are disclosed. The pulling eye comprises a bolt, a sleeve, and a collet. The sleeve has a hollow interior defining a cavity configured to receive the collet through an open end, and an aperture passing from the exterior of the sleeve to the cavity at the opposite end. The bolt has a head portion and a threaded shaft configured to pass through the aperture and engage a complementary threaded orifice at one end of the collet. The collet has two or more jaws extending from the opposite end that are configured to exert a compression force the terminal end of a conductor inserted between the jaws as the collet is drawn into the cavity of the sleeve by tightening the bolt.

A method and apparatus for transferring the ends of power lines between first and second supports including a frame having a pair of independently operable hoist mechanisms which each include a tension line with an attachment element at the end thereof, with the drums being rotatable by respective ratchet mechanisms for enabling the transfer of the end of a tension line from one support location to a different support location.

A hoist spooling assembly for spooling a cable about a drum while preventing relative movement between the cable and the drum. The hoist spooling assembly evenly delivers force from a roller to the cable while reducing the incidence of spooling problems, including mechanical wear of the cable and formation of loops and kinks in the cable.

The present invention provides an apparatus and method for recovering the core (108) of a subterranean sheathed electrical cable (106), while minimising the impact on the surrounding environment. The apparatus comprises a ram (102) operable to exert a pushing force on the core of a length of the cable, a plurality of linkages, each linkage being configured to be insertable into the cable along its length under the action of the ram to displace the core relative to an outer sheath of the cable, and a puller operable (104) to exert a pulling force on the core to thereby facilitate removal of the displaced core from the outer sheath by action of the pushing/pulling forces. The apparatus and method are found to be particularly suited to the recovery of high-tension copper core cables, while enabling any hydrocarbon (e.g. oil) impregnated inner sheathing to be controllably disposed of without hazard to the environment.

An apparatus for moving an elongate component within or through one of a plurality of sidewalls of a pit, including a gripping arrangement for releasably gripping the elongate component, a lever arm comprising a handle at a first end and the gripping arrangement at the second end, and a frame to which the lever arm is attached, wherein during use the frame is positioned substantially above the pit, and the gripping arrangement hangs downwardly from the frame into the pit.

A load sensitive magnetic clutch device includes: a magnetic pole rotating body having magnetic poles arranged on the circumference thereof and provided with a clutch projection of a claw clutch at an end thereof; a yoke rotating body configured to rotate about an axial center of rotation identical to that of the magnetic pole rotating body; and a high-torque input member configured to rotate about the identical axial center of rotation and having a clutch engaging portion engaging the clutch projection. The clutch projection is formed of a magnetic body. The clutch engaging portion includes a clutch retaining magnetic body configured to attract the clutch projection by a magnetic force. The clutch projection is attracted by the clutch retaining magnetic body by an application of a load torque exceeding a torque which is transferrable between the magnetic pole rotating body and the yoke rotating body.

A system for vertically lifting and lowering a container relative to a supporting surface. The system includes at least two lift mechanisms wherein each mechanism includes a frame attached to the container. An elongated cylinder and piston is associated with each frame so that its axis is substantially vertical. A control circuit selectively connects a power source to each cylinder and piston to move the cylinder and piston between a retracted position in which the piston is spaced upwardly from the supporting surface and an extended position in which a foot on the piston engages the supporting surface and lifts the container upwardly from the supporting surface.

A device, system, and associated methods for appliance lifts are disclosed. The appliance lift sits on the bottom of a cabinet, rolls forward and rotates forward and up using four rotating bars and a gear with spring and damper linking them together. This system consists of a platform dimensioned of a size and shape to support most kitchen counter-top appliances or any other like sized items. The platform is supported by a series of linkages housed in a frame. The frame is then on a moveable track. The entire structure is sized to fit inside the lower section of a standard kitchen cabinet.

A manual marine winch includes a safety knockout override preventing release of winch tension without the handle in stowed position. The winch includes a housing; a rotating drum on the housing; a winch line on the drum; a control for spooling and un-spooling the winch line on the drum, wherein the control includes a handle for selectively tensioning the drum and moveable between a position engaged with the drum and a disengaged stowed position; a tension holding mechanism on the housing comprising a ratchet gear coupled to the drum, a pawl selectively engaged with the ratchet gear, and a knockout configures to selectively disengage the pawl from the gear to allow for release of winch tension; and a safety knockout override coupled to the housing and selectively engaged by the handle and configured to prevent release of winch tension when the handle is not in the stowed position.

A workpiece elevating support device which can be utilized by being installed in a carriage-type conveying apparatus for conveying an automobile body while changing the height thereof in each section in an automobile assembly line. The workpiece elevating support device includes at least two center-folding double link mechanisms arranged in parallel on a base, each of which is composed of a lower parallel link, an intermediate link member, an upper parallel link, and an upper link member. The upper link member is consecutively provided with a workpiece support. There is juxtaposed a lock to hold the center-folding double link mechanisms in an expanding-rising posture, which is taken when the upper link members are vertically raised to a predetermined height.

A tool for removing a spindle and/or elastomeric bearing from a hub generally includes a coupler, an arm, and a weight slidably engaged with the arm. The weight is slidable with respect to the arm along a predetermined stroke that limits the travel of the weight. The coupler may be secured to a spindle, which spindle is in turn secured to a bearing, or the coupler may be secured directly to the bearing. An operator may slide the weight between a first position adjacent the coupler and a second position opposite the coupler to impart kinetic energy to the spindle and/or bearing, thereby removing the bearing from or the bearing installing into a hub, depending on whether the kinetic energy is in an inboard or outboard direction.

An elevator sheave (20) includes a belt guiding surface (26) having a surface profile along at least a portion of the belt guiding surface. The surface profile preferably is defined by an nth order polynomial equation where n is a number greater than 2. In one example, the reference point (40) is a central point along the width of the belt guiding surface (26). In one example, a central portion (42) of the surface profile preferably is aligned to be generally parallel with the central axis (34) of the sheave body. Some examples have curvilinear side portions (44,46) between the central portion (42) and the edges (28,30) of the sheave. Other examples also include second side portions (48,50) that have linear profiles.

Diverting pulley arrangement of an elevator, which includes an axle, at least one diverting pulley that rotates while supported on the axle, a faceplate structure, in relation to which and supported by which the diverting pulley is arranged to rotate on the first side of the faceplate structure, which axle is locked so that it does not rotate in relation to the faceplate structure by the aid of a locking element, which locking element is on the second side of the faceplate structure and supported so that it does not move in relation to the faceplate structure. The locking element is placed against the locking surface included in the axle so that the contact point of the locking element and the locking surface of the axle is at least partly visible.

An apparatus for raising and lowering a carrier for supporting clothes hangers or other hanging articles within a wardrobe closet that includes a tube, brackets for rotatable mounting of the tube, a tubular motor coupled to the tube for rotating the tube, and a base that attaches to a side panel of the wardrobe closet. Two arms each lie on a plane parallel to the base and to the side panel, attach at their ends to the carrier, and are mounted on the base so that they may oscillate and pivot in the plane between two positions, raising and lowering the carrier. At the lowest position the carrier releases from the arms and drop further. Fabric straps are wound onto and unwound from the tube to raise and lower the arms as the tube is rotated. A remote control receiver or programmable device may be used to control operation of the motor.

A dual-purpose hydraulic electric jack comprises a hydraulic lifting mechanism (1, 2), an oil pump (12), an oil tank (9), an oil conveying pipeline and an electric motor (14). The lifting mechanism, the oil pump and the oil tank are all connected with the oil conveying pipeline. A transmission mechanism is arranged between the oil pump and the electric motor. A one-way valve (10) is provided between the oil tank and the oil pump. The oil pump (12) is equipped on one end side of the electric motor (14), and an air pump (15) is equipped on the other end side of the electric motor (14). A transmission mechanism is arranged between the air pump and the electric motor. The air pump is communicated with an air conveying pipeline (35) and the electric motor is equipped with a trigger mechanism for controlling the connection of the electric motor with the transmission mechanism between the electric motor and the air pump or oil pump. The function of the hydraulic electric jack is enhanced greatly and the hydraulic electric jack is convenient to use.

A height adjusting device for a vehicle suspension seat includes: a control valve having an air injection pin and an air discharge pin formed therein; a first push support having one end rotatably coupled to the control valve and pressurizing the air injection pin when rotated in one direction; a second push support having one end rotatably coupled to the control vale, pressurizing the air discharge pin when rotated in one direction, and disposed to correspond to the first push support; a first push rod pressurizing the other end of the first push support so as to rotate the first push support; and a second push rod pressurizing the other end of the second push support so as to rotate the second push support, and disposed to correspond to the first push rod.

A drive device for a belt axis of a winch, to address the problems existing in the conventional drive device for the belt axis of the winch including a short service life and a high cost. The drive device is disposed at the end of the belt axis of the winch. The drive device comprises a stationary seat and a rotary cylinder. The rotary cylinder is provided with a socket for inserting a crowbar. The stationary seat is fixedly connected with the belt axis. The rotary cylinder is axially fixed to the stationary seat. A unidirectional mechanism is provided between the rotary cylinder and the belt axis and operates by means of the engagement of teeth of the ratchet wheel. The belt axis is brought into continuous one-way rotation by using the unidirectional mechanism while the rotary cylinder is turned back and forth.

A three dimensional wire flying system includes a plurality of winches collectively hanging an object and a control unit for controlling the plurality of winches and the main safety device. Each of the plurality of winches includes a drum unit, a wire wound on the drum unit, a motor unit which provides power to the drum unit, a brake module which stops rotation of the drum unit, a limit switch which operates upon detecting a hardware limit state, and a servo-system. Each of the plurality of winches operates to move the object in a three dimensional space in three directions, including an up-down direction, a left-right direction and a forward-backward direction, and each winch provides a multi-level safety protection.

A wireless remote forms a two-way radiofrequency (RF) communication network with a winch control module that allows the wireless remote to control both the winch and additional vehicle accessories through the winch control module. Further accessory control modules allow the control of more accessories utilizing the wireless remote by way of RF communication. Feedback from either the winch control module or the accessory control module is sent back to the wireless remote to allow the operator to view the current operating conditions of the winch or accessories.

A spin stand device has an adjustable base frame to allow width and depth profile adjustments and a multitude of mounting accessories which can account for efficiently painting a body part or item of many different types, makes, models, and years of vehicles; with minimized drying time and greatly reduced painting time due to the variety of positions achievable during the painting process.

Health and usage monitoring systems for aircraft hoist systems are described herein. In some embodiments, a health and usage monitoring system comprises a capacitive load cell and a processing unit for communication with the capacitive load cell, the capacitive load cell comprising a load receiving surface and a capacitive assembly coupled to the load receiving surface, the capacitive assembly comprising parallel electrically conductive plates separated by a reversibly deformable spacer construction wherein the parallel plates comprise aligned apertures providing a passageway through the capacitive assembly for the hoist system cable.

A load sensing transmission device in which when a rotation is transmitted to a sun gear, and planetary gears are rotated, if the rotation of an internally-toothed ring gear disposed at an outer circumference of the planetary gears is restricted in at least one direction, a decelerated rotation is output from a planetary carrier by revolution of the planetary gears. When the internally-toothed ring gear is rotated without being restricted, and simultaneously rotated together with the revolution of the planetary gears the rotation which is not decelerated is output from the planetary carrier. Existence and non-existence of the restriction of the rotation of the internally-toothed ring gear are switched by sensing a load by the load sensing mechanism and performing the engagement and disengagement by an engagement pawl. The rotation of the planetary carrier is output through a plate with slider, load springs, and a plate with cam.

A cable winch device, in particular a cable winch device of a crane with at least one cable winch, with at least one cable, wherein the cable is at least partly wound up on the cable winch and/or can be wound up and/or unwound, and with at least one tilting means by means of which the cable which can at least partly be tilted and/or pivoted about an axis which is substantially parallel to the longitudinal axis of the cable winch. A crane is also disclosed herein.

An assembly for collapsing a self-expanding prosthetic heart valve includes a compression member, a support member and a constricting member. The compression member has a tapered wall between its first open end and its second open end, the tapered wall defining an open space adapted to receive the valve. The support member has a base and a recess adapted to receive an end of the valve. The support member and the compression member are movable toward one another to compress the valve and push it through a relatively small aperture in the second open end of the compression member. The second end of the constricting member is sized to receive the compressed valve from the second open end of the compression member for loading into a delivery device.

A valve device (1) comprising; a body portion (2) having a plurality of openings, a valve seat (6) located within said body portion (2), an end stop (4,8), corresponding to an opening of said body portion (2), said end stop (4,8) comprising a port portion (38,39) through which fluid may flow, and a nozzle (33,35), in fluid communication with said port portion (38,39), said nozzle (33,35) configured for sealing against said valve seat (6) and thereby preventing flow through the valve device (1), the valve device (1) being openable by relative motion of said nozzle (33,35) with respect to said valve seat (6), and adjustment means configured to allow independent adjustment of the location of said nozzle (33,35) with respect to said valve seat (6).

A hydraulic jack attachment for quickly and safely jacking up high clearance objects in an efficient manner. The hydraulic jack attachment generally includes a base support adapted to be positioned underneath an object to be lifted. The base support includes a footing which includes one or more wheels to aid in repositioning the base support. A linkage tube is interlocked with a lifting member and positioned within the base support. A hydraulic jack may be placed into a lower end of the base support via an access opening. When the hydraulic jack is lifted, it will force the linkage tube and lifting tube upwards. A lifting head positioned on the upper end of the lifting tube will press against and force the object upwardly to jack the object up.

An extension has a main extension body with a first extension end and a second extension end, an extension passage is defined there between. An annular extension recess is formed about the extension passage at the first extension end. An annular extension flange is formed about the extension passage at the second extension end. A saddle has a main saddle body with a first saddle end and a second saddle end with a saddle passage defined there between. An annular saddle flange is formed about the saddle passage at the second saddle end. A fastener has an elongate shaft with a first shaft end and a second shaft end. A head is at the first shaft end. A fastening engagement is about the second shaft end. The shaft is configured to be disposed within the saddle passage and the extension passage.

An aerial roller spacer apparatus and related methods thereto are provided. The aerial roller spacer apparatus includes a spacer body. At least one saddle is formed on the spacer body. A spacer arm is connected to the spacer body at a first end, wherein the spacer arm extends away from the spacer body. A roller assembly is positioned proximate to a second end of the spacer arm, wherein the roller assembly has two rotatable roller halves that are removably engagable with one another with at least one fastener. A messenger groove is formed between the two rotatable roller halves.

A direct drive drawworks (100) has a permanent magnet motor (40) with a first set of windings (250) and a second set of windings (252), a shaft (41) extending from the permanent magnet motor (40) such that the permanent magnet motor directly rotates the shaft (41), a drum (43) connected to the shaft (41) away from the permanent magnet motor (40) such that the rotation of the shaft (41) causes a corresponding rotation of the drum (43), and a switch cooperative with the first set of windings and the second set of windings so as to cause the sets of windings to be selectively connected in parallel or in series.

A field-installable pulling eye and a method for providing and using the same are disclosed. The pulling eye comprises a bolt, a sleeve, and a collet. The sleeve has a hollow interior defining a cavity configured to receive the collet through an open end, and an aperture passing from the exterior of the sleeve to the cavity at the opposite end. The bolt has a head portion and a threaded shaft configured to pass through the aperture and engage a complementary threaded orifice at one end of the collet. The collet has two or more jaws extending from the opposite end that are configured to exert a compression force the terminal end of a conductor inserted between the jaws as the collet is drawn into the cavity of the sleeve by tightening the bolt.

This invention discloses mechanical and hydraulic jacks for lifting heavy fireproof and burglary proof file cabinets with their contents inside for transportation to a truck or other destination. This jack can also lift lateral or regular file cabinets with their contents inside for transportation. It discloses a hook assembly which can be extended over the top of the cabinet remote from the jack with a hook to hold the cabinet from tilting. It discloses a lifting assembly with a lifting plate at the front bottom of the jack for inserting under the bottom corners of the cabinet for lifting. A device for tilting the cabinet away from the jack is disclosed to allow the lifting plate to be inserted under the cabinet. A lifting plate on the front bottom of the jack can be extended under the end of a file cabinet which is secured by the hooking assembly.

A cable winch device, particularly a cable winch device for a crane, has at least one cable winch with at least one cable, with the cable wound and/or unwound at least partially on the cable winch. The cable winch can be shifted and/or moved at least partially substantially along the longitudinal axis of the cable winch. A crane, particularly a deep sea crane, has at least one such cable winch device.