About six years ago, a colleague I’ll call Tom, because that’s his name, forwarded me a link to the ‘WASD CODE’; a keyboard focused on the needs of programmers, designed with the help of Stack Overflow’s Jeff Atwood. I had no idea at the time that there were people actually dedicating themselves to creating keyboards beyond the stock fare shipping with computers. As I read and re-read the blurb, I was smitten.

A navigation system having a central device which uses a link shape compression unit to compress information of altitude changes of a road link obtained from a three-dimensional road map, and calculates a geometry parameter based on variation of energy of a vehicle travelling on the road link. An on-board terminal device estimates the vehicle's average travelling pattern by using a travel-pattern-estimation unit based on the geometry parameter calculated by the central device, a link-travelling time estimated from statistically-stored traffic information, and a link length. The on-board terminal device further calculates fuel consumption of the vehicle travelling on each road link based on the estimated travelling pattern and parameters of the vehicle by using a fuel-consumption calculation unit, and then, searches a fuel-efficient route by using the fuel consumption as a link cost. The on-board terminal device has a vehicle-type selector for selecting a type of the vehicle.

Methods, systems, and computer readable media for monitored application of mechanical force to samples using acoustic energy and mechanical parameter value extraction using mechanical response models can be used for determining mechanical property parameters of a sample. An exemplary method includes applying acoustic energy to a sample to apply a mechanical force to the sample, measuring a response by the sample during the application of the acoustic energy, measuring a recovery response of the sample following cessation of the application of the acoustic energy, and determining a value for at least one additional mechanical property parameter of the sample based on the response measured during application of the acoustic energy and the recovery response measured following cessation of the application of acoustic energy.

A lipoaspirate collection device to aid in the collection and processing of human tissue and fluid obtained during liposuction for use in point-of-care cell therapy. The collection device includes a collection body and a collection cap. The collection cap may have a fluid port, a lipoaspirate port, a vacuum port, and a relief valve. Within the central cavity of the collection device, a cone shaped may be positioned such that the apex of the cone is positioned underneath the lipoaspirate inlet through which the lipoaspirate fluid and tissue are introduced.

An abrasive tool including a CMP pad conditioner having a substrate including a first major surface, a second major surface opposite the first major surface, and a side surface extending between the first major surface and the second major, wherein a first layer of abrasive grains is attached to the first major surface and a second layer of abrasive grains is attached to the second major surface. The conditioner further includes a first sealing member extending in a peripheral direction along a portion of the side surface of the substrate.

A coupling means (10) provided with a first member (20) suitable for being fastened to a first rotary part (2) and with a second member (30) suitable for being fastened to a second rotary part (3), the first member (20) being provided with a first diaphragm (22) and the second member (30) being provided with a second diaphragm (32) that is secured to the first diaphragm (22). An emergency torque transmission device comprises at least one bayonet system including a protuberance (50) secured to one member (30) and co-operating with an angled groove (60) secured to the other member (20) by being inserted in the angled groove (60) by a thrust-and-rotation movement, in the absence of said breakage said coupling means (10) including both axial clearances in compression (70') and in translation (70″) and also circumferential clearance between each protuberance (50) and walls defining the corresponding angled groove (60).

In some embodiments, an improved mechanical adhesion of copper metallization to dielectric with partially cured epoxy fillers is presented. In this regard, a substrate build-up film is introduced having epoxy material and a plurality of epoxy microspheres, wherein an interior of the microspheres is not fully cured. Other embodiments are also disclosed and claimed.

Method and apparatus are provided for mechanically processing an organ or organs taken out from slaughtered poultry in a processing device or processing line, which organ or organs form part of an organ package and wherein the organ or organs are separated from the organ package. The organ package is spatially oriented by the processing device without notably breaking tissue connections in the package, and in a preselected order so as to cause the harvesting of organs from the package to occur in a preselected sequence that depends on the location of the organ package in the processing device or processing line.

Method and apparatus are provided for mechanically processing an organ or organs taken out from slaughtered poultry in a processing device or processing line, which organ or organs form part of an organ package and wherein said organ or organs are separated from the organ package. The organ package is spatially oriented by the processing device without notably breaking tissue connections in the package, and in a preselected order so as to cause harvesting of organs from the package to occur in a preselected sequence that depends on the location of the organ package in the processing device or processing line.

According to one aspect of the present disclosure, a surgical instrument is disclosed. The instrument includes a handle portion, a body portion extending distally from the handle portion and defining a first longitudinal axis and a loading unit. The loading unit includes a tool assembly, the loading adapted to be coupled to the body portion. The instrument also includes a sensor tube movably positioned within the body portion, the sensor tube adapted to engage the loading unit and a load switch coupled to a microcontroller. The load switch is adapted to be actuated by the sensor tube when the sensor tube is engaged by the loading unit being inserted into the body portion.

Methods for the fabrication of a Microelectromechanical Systems (“MEMS”) devices are provided, as are MEMS devices. In one embodiment, the MEMS device fabrication method includes forming at least one via opening extending into a substrate wafer, depositing a body of electrically-conductive material over the substrate wafer and into the via opening to produce a via, bonding the substrate wafer to a transducer wafer having an electrically-conductive transducer layer, and forming an electrical connection between the via and the electrically-conductive transducer layer. The substrate wafer is thinned to reveal the via through a bottom surface of the substrate wafer, and a backside conductor is produced over a bottom surface of the substrate wafer electrically coupled to the via.

Disclosed are one-port and two-port voltage-tunable micro-electromechanical capacitors, switches, and filter devices. High aspect-ratio metal micromachining is used to implement very high quality factor (Q) tunable and fixed capacitors, fixed inductors, and low insertion loss tunable and fixed bandpass LC filters. The tunable capacitors can move in the plane of the substrate by the application of DC voltages and achieve greater than 100% of tuning. A combination of low-loss substrate and highest conductivity metal is used to achieve record high Q and low insertion loss at radio frequencies. The disclosed tunable capacitor structure can also be used as a micromechanical switch.

An improved grounding technique for mechanically adjustable rotary capacitors uses a directly grounded bronze sliding contact to effectively and continuously ground the rotating comb-like blades of the capacitor. RF measurements of the continuity and repeatability of the capacitance settings prove the suitability of the modified capacitors for using in pre-calibrated multi-capacitor MHz range impedance tuners.

A mechanical capstan amplifier. The mechanical capstan amplifier (60) having a first tensioner (64) with a first actuating rod (72) extending therefrom. The first tensioner (64) is configured to rotate the first actuating rod (72). The amplifier (60) also includes a drive motor (62) having a drive rod (78) extending therefrom. The drive motor (62) is configured to rotate the drive rod (78). A first cord (66), extending between the first actuating rod (72) and a first load to be moved also extends at least partially around the drive rod (78). Actuation of the first tensioner (64) causes the first cord (66) to tighten around the drive rod (78) and moves the load.

A jointed mechanism including a segment coupled to a joint; and an elongated component coupled to the segment, where applying a pulling force to the elongated component rotates the segment around the joint, elastically deforming the elongated component; wherein the elastic deformation generates an elongated component elastic force sufficient to rotate the segment, in an opposite direction, in absence of the pulling force.

Provided are a method for post-treatment of a carbonaceous material using dehydrocyclization, a carbonaceous material post-treated by the method, and a polymer composite material including the carbonaceous material. More particularly, provided are a method for post-treatment of a carbonaceous material using dehydrocyclization, including subjecting the carbonaceous material to dehydrocyclization at room temperature to heal structural defects in the carbonaceous material, while increasing the effective conjugated length of the carbonaceous material to improve the electrical conductivity thereof, as well as a carbonaceous material post-treated by the method and a polymer composite material including the carbonaceous material.

Mechanically short multi-carriage impedance tuners use meandering slabline structures. The meandering structure reduces the overall tuner length by a factor of 2.5 at 0.4 GHz. The critical issue of slabline bends is addressed with several low loss, low reflection alternatives. A preferred configuration comprises a vertical-horizontal slabline transition. Cable connections are discarded because of reflections and insertion loss. Measured results show acceptable performance. The tuner is mostly interesting for relatively lower microwave frequencies, such as 1 GHz.

An electro-mechanical vend-sensing system includes at least one biased member mounted on a side of the vend space having a first potential voltage. A contact strip with a second potential voltage is positioned beneath the biased member. A controller circuit senses when the biased member contacts the contact strip, which indicates that a article has been appropriately vended to the customer.

Methods are described for mechanically scraping surfaces of boards, such as flooring boards, to impart random-looking scraped profiles therein. An apparatus for mechanically scraping boards to form the scraped board products also is described. A board, such as a flooring board, having a random-looking scraped appearance that includes overlapping multiple scrape patterns is described. Boards, such as flooring boards, having a simulated rustic or distressed appearance made with the methods and apparatus also are described.

A lightweight folding motorized chair with mechanical traction steering and braking. A folding frame supports the traction wheels and the drive system with hinged frame members configured to mechanically fold the control levers, wheels and periphery components into a substantially flat configuration for easy storage in small spaces. A mix of weight saving choices including: structural materials; mechanical traction control system; lithium ion battery; and overall lightweight design keeps the folding motorized chair at a size and weight that a person can lift into the trunk of a car.

Apparatus for performing electron radiation therapy on a breast cancer patient preferably includes an intraoperative electron radiation therapy machine, an intraoperative electron radiation therapy collimator tube connected to the intraoperative electron radiation therapy machine, and a plurality of filters made of a material having substantially the same density as human breast tissue for placement between the machine and the patient to change the energy of a monoenergetic beam after the beam has left the machine, allowing a filter to be chosen to reduce the energy traveling through the tube to a desired amount of energy to treat the patient. A method of controlling the amount of energy to reach a breast cancer patient undergoing electron radiation therapy includes selecting a filter made of a material having substantially the same density as human tissue and placing the filter between an intraoperative electron radiation therapy machine and a breast cancer patient to change the energy of a monoenergetic beam after it has left the machine, the filter being chosen to reduce the energy traveling from the machine to a desired amount of energy to treat the patient.

A mechanical coupling, particularly in a draftgear in rail vehicles, includes a central plate (5) turnably mounted in a coupler head and having a link (7) pivoted in the same, and including a hooking mechanism for detachable hooking up of the central plate and the link in the non coupled position of the coupling, and a releasing device (10) for the automatic detachment of the hooking mechanism upon coupling. The hooking mechanism includes a hooking rod (12) pivotally connected with the central plate, which rod, by a lug (16), clutches a collar (11) arranged in the coupler head and, upon activation of the releasing device, detaches from the collar. A leaf spring (13) is arranged in the coupler head in order to, in abutment against the hooking rod, force the same, under the bias from the spring, to be pressed against the collar in the hooked up and disengaged positions.

An apparatus and method for the actuation of down-hole tools are provided. The down-hole tool that may be actuated and controlled using the apparatus and method may include a reamer, an adjustable gauge stabilizer, vertical steerable tools, rotary steerable tools, by-pass valves, packers, whipstocks, down hole valves, latch or release mechanisms and/or anchor mechanisms.

Mechanical visbreaking and pyrolysis between counter-rotating coaxial centrifugal impellers in a continuous radial counterflow process minimizes wastewater discharges. In one example, a cataclastic shear retort comminutes, shear thins, and shear heats an axial feed, such as tar sand, oil shale, coal tailings, distillation bottoms, or lignite. Pyrolyzing the feedstock in this shear retort yields a product stream of gases, naphthas, and oils which first mixes with the feedstock and then is axially extracted, while spent solids are simultaneously extruded from the periphery as coked devolatilized residue, such as char sand for upgrading soil to terra preta. Recirculation of shear-heated solids in long residence time within the shear retort brings heat from the spent solids at the periphery to the feedstock without an external heated sand loop. CO2 emissions from combustion to heat water for oil extraction are eliminated.

A method of fabricating a mechanical member for aircraft, including a plurality of operations of braiding and depositing layers of braided reinforcing fibers on a mandrel (11) by using braiding machine. Each operation comprises braiding a braided layer and depositing it by moving the mandrel (11) along a central axis of the braiding machine. Each of the various superposed braided layers comprises both longitudinal fibers (12, 12G) that are parallel to a main direction of the mandrel (11), and interlacing fibers that are inclined. At least one operation is configured to form and deposit a braided layer having, in at least one cross-section of the member, a density of longitudinal fibers that differs depending on whether consideration is given to one angular region (S1) or another angular region (S2) of the same extent around the center of gravity (G) of the mandrel (11) in the section under consideration.

An adjustable mechanical vibration limiting and absorbing device for an archery bow including a hollow housing and two groups of elastomer washers provided in the hollow housing with a means for preventing the first group from advancing out of the hollow housing and separating the first group from the second group. In addition, a fastener extends through the center of the first and second groups of elastomer washers and a lock nut and weight are provided on the projecting end of the fastener.

A method for producing individual compacts made of coke and suitable for coke oven chambers by dividing a coal cake in a non-mechanical manner, wherein the coal cake is produced by a compression method according to the prior art and the coal cake is divided by non-mechanical, energy-supplying media, and the non-mechanical media supplying shearing energy are, for example, a laser beam, a high-pressure water jet, an abrasive-solid jet, an ultrasonic beam, a compressed-air jet, or a gas jet. By using the method, coal compacts can be produced from coal cakes without forming dust, without wearing out cutting tools, and with high precision.

A tool is provided for moving a first clamping or gripping member toward or away from a second facing clamping or gripping member, the tool having a double threaded drive shaft coupled to opposed threaded linkage driving members for causing the threaded linkage driving members to be driven toward or away from each other. As the threaded linkage driving members move closer, the resulting angle of the links becomes steeper, thus increasing the mechanical advantage of the clamping tool, enhancing clamping forces. A beneficial result is a clamping apparatus that requires less manual energy than a traditional clamp. Another beneficial result is provided if the same amount of energy is applied to the driveshaft as in a traditional clamp, the resulting clamping force is significantly higher. If the second clamping member is adjustable, it accommodates wide variations in thickness of an object positioned between the first and second clamping members.

A hand-operated cutting tool includes first and second cutting members pivotally connected at a first pivot point, a lever having a longitudinal axis and pivotally connected to the first cutting member at a second pivot point, and a translatable curvilinear pivot connection between the lever and the second cutting member.

An article, system and method related to a magnetomechanical marker used to mark stationary assets. Magnetomechanical markers can be arranged in clusters and associated with stationary assets, including assets buried underground. Markers can be associated with an asset by being attached to the asset, arranged in a particular spatial relationship with the asset, or in any other appropriate way. A portable locating device can be used to generate an alternating magnetic field to activate the magnetomechanical marker and thus locate the asset.

A new method for continuous casting of molten metal is provided that allows one to obtain an intermediate product such as slab, billet wire, etc. before subsequent thermomechanical treatment (e.g. lamination or annealing), such that its chemical composition is modified by the addition of elements in order to give it greater mechanical strength.

A tension release device for compensating mechanical error of a tension device for a sewing machine includes a rotary arm, a tension release shaft, a guiding member, an actuating member, and a micro-adjustment member, the rotary arm is located at one end of the tension release shaft which is inserted through the base, the tension release shaft is coupled to the guiding member, the guiding member is provided with an arc-shaped guiding flange which includes a first end and a second end higher than the first end. On the actuating member is provided a push portion which protrudes toward and is pushed by the guiding flange of the guiding member, a micro-adjustment hole is formed at one end of the actuating member or at the one end of the control shaft, and the micro-adjustment member is screwed in the micro-adjustment hole and extends toward the tension release shaft.

A mechanical rotational drive has a bar-like torsion element, whereby the torsion element is firmly clamped with a first end in a bearing device. The torsion element can be pivoted with a second free end with respect to the clamped end about the longitudinal axis, forming a rotation axis, of the torsion element between a relaxed position and a tensioned position, whereby the length of the torsion element is reduced with respect to the relaxed position when the torsion element is brought into its tensioned position. A device for transmitting a torque into the torsion element or out of the torsion element is provided in the area of the free end, and a damping device is arranged in the axial direction of the torsion element at a fixed distance from the bearing device and adjacent to the free end of the torsion element, and a damping part is provided on the torsion element in the area of the free end of the torsion element, which damping part in the relaxed position is in friction engagement with the damping device and which in the tensioned position is not engaged with the damping device.

An inexpensive apparatus for powering a toy plane including a rubber band motor which is connectable to the plane's propeller and to a winding mechanism, including a gear mechanism which is activated by a handle. As the handle is repeatedly squeezed and released by the user, the motor is wound up. An anti-reversing ratchet is coupled with the motor to prevent unwinding until the user wishes to launch the plane.

A mechanical energy storage system includes a containment vessel, a drive shaft operatively connected to a generator/motor and supported for rotation in the containment vessel. A support structure is attached to the drive shaft and configured for radial extension from a rest position proximate the drive shaft. A resilient member having a mass and extending circumferentially around the drive shaft is connected to free ends of the support structure and configured to store elastic energy when the support structure extends radially from its rest position. Upon rotation of the drive shaft, the resilient member stores both elastic and rotational energy commensurate with its mass and elastic properties.

In accordance with embodiments, there are provided systems and method for In accordance with embodiments, there are provided systems and method for generating mechanical movement that includes a resilient member having an original shape. A bulwark is connected to the resilient member. A system is provided to selectively apply a torsional force to the resilient member using capillary forces to rotate the resilient member with respect to the bulwark. This places the resilient member in a deformed shape. The system also selectively terminates the capillary forces allowing the resilient member to return to the original shape. These and other embodiments are described more fully below.

A micromechanical component is described having a substrate which has at least one stator electrode fixedly mounted with respect to the substrate, a movable mass having at least one actuator electrode fixedly mounted with respect to the movable mass, and at least one spring via which the movable mass is displaceable. The movable mass is structured from the substrate with the aid of at least one separating trench, at least one outer stator electrode spans at least one section of the at least one separating trench and/or of the movable mass, the at least one actuator electrode protrudes between the at least one outer stator electrode and the substrate, and at least one inner stator electrode protrudes between the at least one actuator electrode and the substrate. A related manufacturing method is also described for a micromechanical component.

A method of thermo-mechanically processing a preform composed of tool steel and a tool to modify a workpiece. The preform has a region containing austenite. The method comprises establishing the region at a process temperature between a martensitic start temperature and a stable austenitic temperature. While at the process temperature, the region is deformed to change an outer dimension and to modify the microstructure to a depth of 1 millimeter or more. The tool comprises a member composed of tool steel. The member includes a first region that extends from the outer surface to a depth of greater than 1 millimeter and a second region. The first region includes a plurality of grains having an average misorientation angle greater than about 34°, an average grain size that is at least 10% smaller than the second region, and has a different grain orientation than the second region.

Bimetallic alloys prepared in a ball milling process, such as iron nickel (FeNi), iron palladium (FePd), and magnesium palladium (MgPd) provide in situ catalyst system for remediating and degrading nitro explosive compounds. Specifically, munitions, such as, 2,4,6-trinitrotoluene (TNT), cyclo-1,3,5-trimethylene-2,4,6-trinitramine (RDX), nitrocellulose and nitroglycerine that have become contaminants in groundwater, soil, and other structures are treated on site to remediate explosive contamination.

A removable device for attaching two mechanical parts includes a pin removably locking a first part with respect to a second part, a retainer member on the pin and a resiliently loaded tension member which collaborate to prevent the pin from coming out of its locked position; the removable device further includes at least two inclined surfaces, the general shape of which is that of a projection oriented in the axial direction of the pin, such that when the pin rotates, the retainer member runs along the inclined surfaces and the pin moves between the locked position and unlocked position against a force exerted on the pin along a longitudinal axial direction of the pin exerted by the tension member.

A mechanic's leaning device includes a base, an upper torso support having an adjustable first height above the base, and a combination step and knee support having an adjustable second height above the base which is less than and adjustable relative to the first height. The mechanic's leaning device can be used by mechanics of all sizes for working on a wide variety of vehicles, ranging from very small to very large.

A machine and a method for treating fabrics, comprise in combination a step of inducing substantially vertical vibrations in a quantity of fabric in the form of a substantially compact mass and a simultaneous step of drying the rest of the fabric in opened-out form.

An electromechanical actuator for a movable flight control surface of an aircraft, the actuator comprising an electric motor having an outlet shaft with first and second directions of rotation, a movement transmission arranged to connect the outlet shaft of the motor to the movable flight control surface, and a control unit for controlling the motor. The transmission incorporates a pawl device arranged to oppose the transmission of movement in the first direction of rotation, and the control unit is connected to a pawl declutching member for declutching the pawl and enabling movement to be transmitted in the first direction of rotation.

An apparatus for securing and drawing upon a piece of paper, includes a board having a drawing surface sized to receive the paper. The drawing surface is bounded along its perimeter by a border region. An array of border pieces is fastened securely to the border region, each border piece being aligned relative to the others to establish a precisely sized drawing surface area to accommodate the paper. Each border piece has a length shorter than that of the corresponding edge of the drawing surface.

A mechanical encoder including an assembly, a flexible element, and a signal sensing module is disclosed. The assembly has a plurality of poking/stiring structure that provides poking/stirring function. The flexible element includes a first piezoelectric layer and a second piezoelectric layer. The first piezoelectric layer and the second piezoelectric layer are stacked on each other via an attach material. The flexible element is set up so that the poking/stiring structures stir/poke a first end of the flexible element, so as to output an electrical signal responsive to deformation of the flexible element. The signal sensing module receives the electrical signal to generate a position signal and a direction signal corresponding to the movement of the poking structures.

An electromechanical actuator comprising a body and an electric motor driving at least one motion transmission element connected to the body via a brake device, a mechanical torque limiter with rollers, and a unidirectional transmission member, the brake device including an electrical activator member so that when the activator member is powered, the unidirectional transmission member is released relative to the body, and when the activator member is not powered, the unidirectional transmission member is secured to the body and opposes pivoting of the transmission element in one direction of rotation up to a maximum transmissible torque defined by the torque limiter.

The system and corresponding process includes a system for producing a mechanical image of original audio source media and a system for encoding the mechanical image information into a digital file. A processing system recovers the mechanical image information from the digital file at a receiving end. Audio processing is used to produce the original audio source material without the standard losses associated with digital encoding of audio material

A water separator comprises an axially extending airflow passage, an airflow mixer, a plurality of electric plates of alternating charge, and a mechanical separator. The airflow mixer, the plurality of electric plates, and the mechanical separator are disposed within the airflow passage. The airflow mixer imparts a non-axial flow component on airflow through the airflow passage. The electric plates are situated downstream of the mixer, and create an electric field region within the airflow passage. The mechanical separator is situated at or downstream of the electric field region, and is disposed to separate water droplets from air.

The invention relates to an electromechanical-magnetically integrated braking assistance device, comprising an electrical motor, an oil holder, a braking main cylinder, an assistant force generating portion, and a pedal input rod, an absolute displacement sensor or a relative displacement sensor is connected to the pedal input rod; a lead screw is sleeved over the pedal input rod, and a ball nut is sleeved over the lead screw; a ball nut bushing is fixed to the ball nut by being sleeved over the ball nut; a driven gear is fixed to the ball nut bushing by being sleeved over the ball nut bushing; and the electric motor meshes with the driven gear via a transmission mechanism. An end of the lead screw which passes through the ball nut bushing has an aperture, into which a feedback disc is installed; an end of the feedback disc is connected to an end of an output rod which is coaxially arranged with the lead screw inside the assistant force generating portion, and another end of the output rod extends into the braking main cylinder and is connected to a piston of the braking main cylinder.

An electro-mechanical brake device may include: a driver configured to generate rotary power; a first gear connected to an output shaft of the driver, and the first gear configured to rotate with the output shaft; a second gear installed in a direction crossing the first gear, engaged with the first gear, and configured to rotate with the first gear; a third gear engaged with the second gear and configured to rotate with the second gear, the third gear having a rotating gear bar installed in parallel to the output shaft and configured to rotate with the output shaft; a moving nut engaged with the third gear and configured to move linearly; and a piston installed in a shape covering an outside of the moving nut, and pushed by the moving nut so as to pressurize a brake pad.