We utilize recent results on the exact block error probability of Gaussian random codes in additive white Gaussian noise to analyze Gaussian random coding for massive multiple-access at finite message length. Soft iterative interference cancellation is found to closely approach the performance bounds recently found in [1]. The existence of two fundamentally different regimes in the trade-off between power and bandwidth efficiency reported in [2] is related to much older results in [3] on power optimization by linear programming. Furthermore, we tighten the achievability bounds of [1] in the low power regime and show that orthogonal constellations are very close to the theoretical limits for message lengths around 100 and above.

In a temporal network causal paths are characterized by the fact that links from a source to a target must respect the chronological order. In this article we study the causal paths structure in temporal networks of human face to face interactions in different social contexts. In a static network paths are transitive i.e. the existence of a link from $a$ to $b$ and from $b$ to $c$ implies the existence of a path from $a$ to $c$ via $b$. In a temporal network the chronological constraint introduces time correlations that affects transitivity. A probabilistic model based on higher order Markov chains shows that correlations that can invalidate transitivity are present only when the time gap between consecutive events is larger than the average value and are negligible below such a value. The comparison between the densities of the temporal and static accessibility matrices shows that the static representation can be used with good approximation. Moreover, we quantify the extent of the causally connected region of the networks over time.

While the exact definition and implementation of accountability depend on the specific context, at its core accountability describes a mechanism that will make decisions transparent and often provides means to sanction "bad" decisions. As such, accountability is specifically relevant for Cyber-Physical Systems, such as robots or drones, that embed themselves into a human society, take decisions and might cause lasting harm. Without a notion of accountability, such systems could behave with impunity and would not fit into society. Despite its relevance, there is currently no agreement on its meaning and, more importantly, no way to express accountability properties for these systems. As a solution we propose to express the accountability properties of systems using Structural Causal Models. They can be represented as human-readable graphical models while also offering mathematical tools to analyze and reason over them. Our central contribution is to show how Structural Causal Models can be used to express and analyze the accountability properties of systems and that this approach allows us to identify accountability patterns. These accountability patterns can be catalogued and used to improve systems and their architectures.

In recent years, all-neural end-to-end approaches have obtained state-of-the-art results on several challenging automatic speech recognition (ASR) tasks. However, most existing works focus on building ASR models where train and test data are drawn from the same domain. This results in poor generalization characteristics on mismatched-domains: e.g., end-to-end models trained on short segments perform poorly when evaluated on longer utterances. In this work, we analyze the generalization properties of streaming and non-streaming recurrent neural network transducer (RNN-T) based end-to-end models in order to identify model components that negatively affect generalization performance. We propose two solutions: combining multiple regularization techniques during training, and using dynamic overlapping inference. On a long-form YouTube test set, when the non-streaming RNN-T model is trained with shorter segments of data, the proposed combination improves word error rate (WER) from 22.3% to 14.8%; when the streaming RNN-T model trained on short Search queries, the proposed techniques improve WER on the YouTube set from 67.0% to 25.3%. Finally, when trained on Librispeech, we find that dynamic overlapping inference improves WER on YouTube from 99.8% to 33.0%.

[IMAGE-1]After having their school year totally disrupted by the coronavirus pandemic, a return to some semblance of normalcy come summer is all many school-age kids and their families are looking forward to. For many, this anticipation includes annual summer camp traditions, from sleep-away adventures on the lake to fun-filled day camps for arts, learning or team sports.…

Agencies, local authorities and national governments do not agree on who should be quarantined or what that should actually look like. Here’s what we do know. By Maya Miller, Caroline Chen and Joshua Kaplan ProPublica People who have been exposed to the coronavirus are being given incomplete or misleading information about whether they should quarantine themselves, exposing major gaps in the public health response to the pandemic and illuminating disagreement among officials about how useful the tactic even is at this point in the disease’s spread.…

[IMAGE-1] Before smartphones and Instagram, there were influencers, and they could be as shallow, overconfident and pejorative as they are today. This new adaptation of Jane Austen's Emma — the feature debuts of photographer and music-video director Autumn de Wilde and Man Booker Prize-winning novelist turned screenwriter Eleanor Catton — brings that sort of modern frisson to its retelling of the tale of a very rich young woman who amuses herself by interfering in the romantic lives of those around her.…

An embodiment of the present invention relates to a method for treating spent caustic soda generated from an oil refinery process, a petrochemical process, etc. through a process in which a series of treatment steps are integrated, wherein the method can constitute a process under mild conditions excluding high temperature and/or high pressure conditions and can be advantageous to a post treatment process since the amount of by-products is small.

Various embodiments of the present invention provide systems and methods for data processing. As an example, a data processing circuit is disclosed that includes a data detector circuit. The data detector circuit includes an anti-causal noise predictive filter circuit and a data detection circuit. In some cases, the anti-causal noise predictive filter circuit is operable to apply noise predictive filtering to a detector input to yield a filtered output, and the data detection circuit is operable to apply a data detection algorithm to the filtered output derived from the anti-causal noise predictive filter circuit.

An electronic device for using pause to manage resources is described. The electronic device includes a processor and instructions stored in memory. The electronic device monitors a pause duration and determines whether to perform a resource management operation based on the pause duration. The electronic device performs the resource management operation based on the pause duration.

According to one embodiment, a method comprises evaluating messages between nodes of a distributed computing environment. Based on timing relationships of the messages, probability of causal links between pairs of messages determined. Based on the determined probability, at least one causal path comprising a plurality of causal links is inferred. Further, an overall probability that the inferred causal path is accurate is determined. In certain embodiments, the overall probability is output for the corresponding causal path to provide an indication of the confidence of the accuracy of such inferred causal path.

An automated emergency power supply system (EPSS) and testing solution that records generator load values and engine exhaust temperature values to evaluate whether an EPSS test satisfies legislated test criteria. The EPSS test is carried out under software control, which initiates a test by instructing an automatic transfer switch (ATS) to change its status to a test status, causing the essential loads to be powered by a generator instead of a main utility power source. Power monitors record the ATS and generator status during the test as well as electrical parameter data from the ATS and generator and exhaust temperature data and other engine parameter data from the generator. When the test is concluded, the ATS is instructed to return the status to normal so that power delivery is resumed from the main power source. The electrical and engine parameter data is analyzed and compared against legislated test criteria to determine a pass/fail result of the EPSS test.

A burner for an exhaust aftertreatment system may include a housing assembly and an ignition device. The housing assembly may include an inner shell surrounded by intermediate and outer shells. The inner shell may at least partially define a combustion chamber. The housing assembly may include an airflow passage having an opening extending through the outer shell. The airflow passage may extend between the outer shell and the intermediate shell as well as between the intermediate shell and the inner shell. The airflow passage may provide fluid communication between the opening and the combustion chamber. The ignition device may be at least partially disposed within the housing assembly and may ignite fuel received from a fuel source and air received from the airflow passage to produce a flame in the combustion chamber. The airflow passage may be in a heat transfer relationship with the flame in the combustion chamber.

A magnetized nut for fastening a compressor wheel of an exhaust turbocharger to a turbo shaft. The nut has a base body made of a non-magnetic material forming a hollow space for accommodating a magnetic material, and a method for the production of the magnetized nut. In order to provide a magnetized nut that is produced in a simple and cost-effective manner and ensures as equal a distribution of mass as possible with regard to the rotational axis of the nut, the magnetic material is introduced into the hollow space using injection molding.

A laminated body composed of a holding member and an inner cylinder is arranged between a heat generation element, which is electrically energized to generate heat, and a case which covers the heat generation element, and the inner cylinder has an upstream side end portion extended to a more upstream side than an upstream side end face of said heat generation element and an upstream side end face of said holding member to form an extension portion, which is formed with a protruding portion protruding to an inner side in a diametrical direction. A flow of an exhaust gas, which flows backwards after colliding with the heat generation element, will be obstructed by said protruding portion. As a result, the backflow exhaust gas stops flowing into a gap between the case and the inner cylinder.

Techniques and devices for measuring polarization crosstalk in birefringence optical media including polarization maintaining fiber.

A method for filling sausages with a paste-like substance by means of a filling machine and to a filling machine for performing this method, including a sensor unit capable of determining at least one parameter that varies differently for different paste-like substances as a function of time. Depending on the at least one determined parameter, a controller determines whether a measure to be implemented on one or more wearing parts is necessary, the wearing parts wearing out at different times depending on the different paste-like substances.

A lower limit value setting unit (52) variably sets a lower limit value (Vth) of a target voltage (Vh*) in a range of a voltage that is higher than the maximum value of voltages (Vb1, Vb2) of power storage devices and is not affected by a dead time provided for converters, based on temperatures (Tb1, Tb2) and required electric powers (Pb1*, Pb2*). A maximum value selection unit (53) sets the maximum value among the voltages (Vb1, Vb2) of the power storage devices and required voltages (Vm1*, Vm2*) of motor-generators, as the target voltage. A target voltage limiting unit (54) compares the target voltage with the lower limit value (Vth), and if the target voltage is lower than the lower limit value (Vth), the target voltage limiting unit (54) sets the lower limit value (Vth) as the target voltage (Vh*).

The invention relates to an optical resonator, laser apparatus and a method of generating a laser beam inside an optical resonator. The optical resonator (100) includes an optical cavity (102) and an optical element (104.1, 104.2) at either end thereof, operable to sustain a light beam (108) therein, characterized in that each optical element (104.1, 104.2) is a phase-only optical element operable to alter a mode of the beam (108) as it propagates along the length of the optical resonator (100), such that in use the beam (108) at one end of the optical resonator (100) has a Gaussian profile while the beam (108) at the other end of the optical resonator (100) has a non-Gaussian profile.

For a flap assembly, in particular an exhaust gas flap assembly, with the flap mounted on both sides via bearing devices in the housing, the disclosure describes a design in which a bearing body is supported radially against an annular collar of the bearing device and, by way of the annular collar, is held braced in a radially spring-loaded manner in a predefined radial position.

An exhaust system for a compression ignition engine comprising an oxidation catalyst for treating carbon monoxide (CO) and hydrocarbons (HCs) in exhaust gas from the compression ignition engine, wherein the oxidation catalyst comprises: a platinum group metal (PGM) component selected from the group consisting of a platinum (Pt) component, a palladium (Pd) component and a combination thereof; an alkaline earth metal component; a support material comprising a modified alumina incorporating a heteroatom component; and a substrate, wherein the platinum group metal (PGM) component, the alkaline earth metal component and the support material are disposed on the substrate.

The invention relates to a method for cleaning exhaust gases, in which an exhaust gas and a sorbent are combined in a fluidized bed reactor. In a subsequent filter system, solid matter is segregated, and thereafter, up to 99 per cent of the sorbent is re-channeled into the fluidized bed reactor, wherein the gas is subjected to a rotation around the flow axis in the fluidized bed reactor.

An emissions recycling system is used on a vehicle towing an agricultural implement to enrich the fertility of the soil. The system includes an exhaust collector for collecting exhaust emissions from the internal combustion engine of the towing vehicle and an exhaust distribution system for injecting at least a portion of the exhaust emissions collected by the exhaust collector into the ground worked by the ground working tools of the agricultural implement. Fertility of the soil is enriched by bioactivity within the soil's micro flora which consumes the greenhouse gas and emissions.

An electro-catalytic honeycomb for controlling exhaust emissions, which adopts to purify a lean-burn exhaust, comprises a honeycomb structural body, a solid-oxide layer and a cathode layer. The honeycomb structural body includes an anode, a plurality of gas channels, and a shell. The anode is formed as a backbone, the gas channels are formed inside the backbone for passing the exhaust, and the shell covers an outer surface of the anode. The solid-oxide layer is adhered to an inner surface of the anode and connects the shell so as to encapsulate the anode. The cathode layer is adhered to a tube wall of the solid-oxide layer and has an oxidizing environment. The anode has a reducing environment. The reducing and the oxidizing environment facilitate an electromotive force to occur between the anode and the cathode layer to promote a decomposition of nitrogen oxides of the exhaust into nitrogen and oxygen.

An elastic longitudinal net (1) for longitudinal food products, especially cold meat products, is formed as a sleeve having at least one longitudinal main warp (21) of a tightening chain weave having at least one substantially inextensible thread (213, 214), and at least one weft (3) having at least one elastic fiber and circumferential sections (31), the ends of which are interweaved substantially perpendicularly between the substantially inextensible fiber and longitudinal sections (32) existing between neighboring circumferential sections (31) and running in a concurrent manner relative to and weaved with at least one main warp (21). The longitudinal sections are interweaved through at least one main warp (21) substantially perpendicularly relative to its longitudinal axis, passing through loops (215, 216) of the at least one substantially inextensible thread (213, 214) of the main warp, forming a serpentine run having at least two external loops (321).

An exhaust connection coupler and a method for manufacturing a braid cover incorporated therein are provided. The method of manufacturing comprises the steps of providing a tubular sleeve formed of braided wire filaments and forming at least one end of the sleeve into shape using a forming die such that the at least one end of the cover includes a circumferential neck portion having a diameter smaller than the diameter of a body portion of the cover. In the method, the sleeve may be pressed between male and female forming dies in order to create the cover's desired shape, which can include a shoulder extending radially outwardly from the cover's neck portion and meeting the cover's body portion at a corner.

A seal assembly for a nozzle in a gas turbine engine includes a connector having a first hinge portion for attaching to the nozzle, a flat portion for sealing against a wall of the engine; and a first hinge for attaching the connector to the flat portion wherein the connector is adapted to rotate relative to the nozzle and the flat portion is adapted to rotate relative to the connector.

In one implementation, a substance removal apparatus may include a collection unit and a removal unit. The collection unit may have a structure forming a channel and an inlet to receive an exhaust from a print system. The removal unit may separate a substance from the exhaust and transfer heat from the exhaust to the print system. The removal unit may include a heat exchanger and an impaction mechanism.

The exhaust gas treatment apparatus has a sealed vessel which is vertically partitioned into two spaces by a partition. A portion of the sealed vessel lower than the partition is an absorbing liquid storage portion, and a portion of the sealed vessel upper than the partition is an exhaust gas introducing portion. The partition is provided with a large number of sparger pipes so that the sparger pipes reach inside an absorbing liquid stored in the absorbing liquid storage portion. The partition is provided with a single gas riser in communication with a space upper than the absorbing liquid in the absorbing liquid storage portion. An upper end of the gas riser passes through a top plate portion of the sealed vessel and protrudes upward.

An air filtration and exhaust system is described. The system comprises a microcontroller, a power supply, and a series of sensors that detect the presence of airborne contaminants such as ultra fine particles, smoke, natural gas and radon gas. In the presence of these airborne contaminants, the system is designed to inactivate and prevent operation of nearby food preparation appliances. Once these contaminants have been safely removed, the operation of these appliances is restored. In addition, the ventilation system may be equipped with a purification subassembly, which safely and efficiently removes such containments from the area. The system may also comprise an alarm that is activatable in the presence of these contaminants.

Exhaust capture and containment are enhanced by means of automatic or manual side skirts, a sensitive breach detector based on interference effects, a combination of vertical and horizontal edge jets, and/or corner jets that are directed to the center diagonally from corners. Associated control functions are described.

Disclosed herein is a sintered composition comprising iron; about 0.05 to about 1 wt % molybdenum; about 3 to about 4.5 wt % silicon; about 0.05 to about 0.5 wt % chromium; about 0.011 to about 0.015 wt % magnesium; all weight percents being based on the total weight of the composition; the composition being devoid of carbon except for trace amounts; and wherein the composition is sintered. Disclosed herein too is a method comprising blending a powdered composition that comprises iron; about 0.05 to about 1 wt % molybdenum; about 3 to about 4.5 wt % silicon; about 0.05 to about 0.5 wt % chromium; about 0.011 to about 0.015 wt % magnesium; all weight percents being based on the total weight of the composition; the composition being devoid of carbon except for trace amounts; compacting and sintering the composition.

Various embodiments of the invention provide a low nickel austenitic stainless steel alloy composition including about 0.6% to about 0.8% by weight carbon; about 16% to about 18% by weight chromium; about 4.5% to about 5.5% by weight nickel; about 2.0% to about 5.0% by weight manganese; about 0.8% to about 1.2% by weight tungsten; about 0.8% to about 1.2% by weight molybdenum; about 0.65% to about 0.85% by weight niobium; about 0.3% to about 1.0% by weight silicon; balance iron and unavoidable impurities, wherein percentages are based on the overall weight of the composition. The invention further provides articles, such as turbine housings, prepared using the inventive alloys.

The invention relates to a low-nickel austenitic stainless steel with high resistance to delayed cracking and the use of the steel. The steel contains in weight % 0.02-0.15% carbon, 7-15% manganese, 14-19% chromium, 0.1-4% nickel, 0.1-3% copper, 0.05-0.3% nitrogen, the balance of the steel being iron and inevitable impurities, and the chemical composition range in terms of the sum of carbon and nitrogen contents (C+N) and the measured Md3o-temperature is inside the area defined by the points ABCD which have the following values Point Md30° C. C+N % A−80 0.1 B+7 0.1 C−40 0.40 D−80 0.40.

The present invention is directed to recombinant thraustochytrids that grow on sucrose and cell cultures comprising the recombinant thraustochytrids as well as methods of producing cell cultures, biomasses, microbial oils, compositions, and biofuels using the recombinant thraustochytrids.

An exhaust gas recirculation device is provided. The device recirculates, from an exhaust system to an intake system, a part of exhaust gas from a plurality of cylinders of a multi-cylinder engine as EGR gas. The device includes a single EGR pipe extending from the exhaust system toward the intake system, an EGR manifold branching from a downstream end portion of the EGR pipe toward each cylinder, and an EGR valve for adjusting an EGR gas amount. The EGR manifold has one or more common EGR passages having a single pipe portion and branched pipe portions, and one or more independent EGR passages. Each shape of the common and independent EGR passages is set so that a communicating path in the EGR manifold communicating an arbitrary cylinder with a cylinder where combustion is performed subsequently thereto has the same volume for any cylinder combination having the adjacent combustion order.

A method of ensuring the safety of exhaust of a water heater includes the following steps: A. start the blower and detect a rotational speed of a motor thereof; B. determine a first range based on the detected rotational speed; C. start the blower and detect the rotational speed of the motor when the water heater is restarted again; D. keep supplying gas to the burner for combustion when the rotational speed detected in step C is within the first range. During operation, a second range is determined by detecting the rotational speed of the motor after an outlet water temperature reaches a corresponding constant temperature range; the rotational speed is continuously detected, and the gas supply is stopped if the detected rotational speed is out of the second range. Thereby, the result of the method would be more accurate regardless of the actual installed status of the exhaust pipe.

A first photoresist pattern and a second photoresist pattern are formed over a substrate. The first photoresist pattern is separated from the second photoresist pattern by a gap. A chemical mixture is coated on the first and second photoresist patterns. The chemical mixture contains a chemical material and surfactant particles mixed into the chemical material. The chemical mixture fills the gap. A baking process is performed on the first and second photoresist patterns, the baking process causing the gap to shrink. At least some surfactant particles are disposed at sidewall boundaries of the gap. A developing process is performed on the first and second photoresist patterns. The developing process removes the chemical mixture in the gap and over the photoresist patterns. The surfactant particles disposed at sidewall boundaries of the gap reduce a capillary effect during the developing process.

A process for advantageously efficiently treating a sulfureous combustible effluent stream by recovering the sulfur in elemental form comprises a step of combustion of the sulfureous combustible effluent stream with an oxidant gas in excess, and then a step of post-combustion of the effluents from the combustion step with an acidic gas. The stream of the post-combustion effluents, free of chemical compounds that are harmful to the efficacy of the Claus catalysts, is treated in a Claus unit, which performs the recovery of the sulfur in elemental form.

Embodiments of the invention provides a decoder for decoding a signal received through a transmission channel in a communication system, said signal carrying information symbols selected from a given alphabet and being associated with a signal vector, said transmission channel being represented by a channel matrix, wherein said decoder comprises: a sub-block division unit (301) configured to divide the received signal vector into a set of sub-vectors in correspondence with a division of a matrix related to said channel matrix;a candidate set estimation unit (305) for recursively determining candidate estimates of sub-blocks of the transmitted signal corresponding to said sub-vectors, each estimate of a given sub-block being determined from at least one candidate estimate of the previously processed sub-blocks,wherein said candidate set estimation unit is configured to determine a set of candidate estimates for at least one sub-block of the transmitted signal by applying at least one iteration of a decoding algorithm using the estimates determined for the previously processed sub-blocks, the number of candidate estimates determined for said sub-block being strictly inferior to the cardinal of the alphabet and superior or equal to two, the decoder further comprising a signal estimation unit (306) for calculating an estimate of the transmitted signal from said candidate estimates determined for said sub-blocks.

An antenna array includes a plurality of patch antennas including a plurality of layers. Each of the plurality of layers are separated by a distance and each support a portion of the plurality of patch antennas. A plurality of connectors are each associated with one of the plurality of layers and supply a signal for transmission by the associated layer. A feed network on each of the plurality of layers provides a connection between a connector associated with the layer and the portion of the patch antennas located on the layer. Each layer transmits a signal having a different orthogonal function applied thereto that multiplexes each of the signals having a different orthogonal function applied thereto onto a single transmission beam. A parabolic reflector reflects the single transmission beam from the plurality of layers of the antenna array.

Methods and apparatus for treating an exhaust gas in a foreline of a substrate processing system are provided herein. In some embodiments, a method for treating an exhaust gas in an exhaust conduit of a substrate processing system includes: flowing an exhaust gas and a reagent gas into an exhaust conduit of a substrate processing system; injecting a non-reactive gas into the exhaust conduit to maintain a desired pressure in the exhaust conduit for conversion of the exhaust gas; and forming a plasma from the exhaust gas and reagent gas, subsequent to injecting the non-reactive gas, to convert the exhaust gas to abatable byproduct gases.

A pollution mitigation system is disclosed. The system can include a valve forming a passage the valve installable to form an orifice in a storm drain retention chamber that passes storm water into a conduit of a storm water management system. The valve having a stem connected to a closure member that can plug the orifice. The valve can have a spring loaded actuator that can move the closure member into a closed position. The system can also include a node such as a wireless sensor node or a mote that has sensors, a transceiver, an antenna, a microcontroller, memory, an energy source and at least one output to control movement of the closure member via the preloaded actuator. The node can have an output that provides the stimulus to the preloaded actuator to cause the preloaded actuator to move the closure member to a position that obstructs the passage in response to either the sensor or a transmission from a mobile telephone such as a cell phone or a smartphone.

The invention relates to the field of virology. The invention provides an isolated essentially mammalian negative-sense single-stranded RNA virus (MPV) within the subfamily Pneumovirinae of the family Paramyxoviridae and identifiable as phylogenetically corresponding to the genus Metapneumovirus and components thereof.

Coming on the heels of the AB5 trauma, the coronavirus lockdown poses an extra economic threat. The COVID-19 pandemic has affected all facets of life in California and the world.…

A gas separation process for treating exhaust gases from combustion processes. The invention involves routing a first portion of the exhaust stream to a carbon dioxide capture step, while simultaneously flowing a second portion of the exhaust gas stream across the feed side of a membrane, flowing a sweep gas stream, usually air, across the permeate side, then passing the permeate/sweep gas back to the combustor.

In a method of reducing pollutants of a combustion engine, exhaust gas, generated by a cylinder of the combustion engine, is fed to an exhaust gas aftertreatment system as a function of a predefined condition solely via a first exhaust channel which communicates with a first one of first and second exhaust valves of the cylinder. The first exhaust channel is hereby coated, at least in part, by a thermally insulating layer selected such that a heat input is transmitted to the exhaust gas aftertreatment system which heat input is greater than a heat input in a second exhaust channel communicating with a second one of the first and second exhaust valves. The predefined condition is defined as a function of a coolant temperature of the combustion engine.

An exhaust treatment system comprising a first oxidation catalyst to oxidise nitrogen and/or carbon compounds in an exhaust stream and a first dosage device downstream of said first oxidation catalyst to supply a first additive. A first reduction catalyst device is arranged downstream of said first dosage device for reduction of nitrogen oxides using said first additive, and for the generation of heat, through at least one exothermal reaction with said exhaust stream. A particulate filter arranged downstream of said first reduction catalyst device to catch soot particles and a second dosage device, arranged downstream of said particulate filter to supply a second additive. A second reduction catalyst device is arranged downstream of said second dosage device for reduction of nitrogen oxides in said exhaust stream, through the use of at least one of said first and said second additive.

An exhaust apparatus for a diesel engine rapidly burns an unburned deposit in an upstream exhaust catalyst with heat of a heater. The exhaust apparatus includes a downstream exhaust cleaner, an upstream exhaust catalyst provided in an exhaust passage, upstream of the downstream exhaust cleaner, a heater disposed at an exhaust inlet of the upstream exhaust catalyst, and an engine starter apparatus. A control unit controls the power supply to the heater and an engine start process is performed by the engine starter apparatus. A start command unit is connected to the control unit. When the engine has been stopped and then the start command unit gives the control unit a start command, the control unit powers the heater without performing an engine start process, thereby keeping the engine stopped for a predetermined period of time after the start command has been given, and subsequently performing the engine start process.

A catalytic converter for an internal combustion engine includes a tubular member which defines a volume within which a catalytic converter substrate is located, the volume communicates with an inlet portion for receiving exhaust gas emissions and with a first outlet portion for discharging emissions after catalytic conversion. The catalytic converter may also include a pipe member within the tubular member, which connects the inlet portion with the volume and guides emissions from the inlet portion in a first direction. The pipe member opens into a deflector member which deflects emissions into the volume in a second direction, and the catalytic converter includes a second outlet portion connected to the deflector member and a valve to control gas flow through the second outlet portion to guide emissions away from the pipe member and out of the catalytic converter prior to reaching the catalytic converter substrate when the valve is open.