To protect both cabbies and passengers during the Covid-19 pandemic, some taxi operators in the city have installed plastic sheets in their vehicles to separate the driver and rear seats.

B'luru: Partitions to shield cabbies, passengers

In a recently completed survey of more than 3,000 fish species in 44 countries around the world marine biologists have discovered that communities with a […]

The post Discovery: Biodiversity shields fish communities from warming appeared first on Smithsonian Insider.

Planting vegetation to protect coasts from natural disasters, such as tsunamis and cyclones, may damage native ecosystems, according to a new study. As there is also questionable evidence on the effectiveness of these 'bioshields', the study suggested a re-think on coastal vegetation policy and research.

The post Speaker manufacturer produces face shields the hi-fi way appeared first on The Lead SA.

There cannot have been many successful run chases in the history of the Watford Observer Fourteen14 Shield that started and ended with a six, less so with both shots being struck by members of the same family. But that was what happened on Tuesday as Watford Haidery capitalised on a blistering early onslaught to secure their place in Wednesday’s final against Abbots Langley with a five-wicket victory over West Herts A.

A destructive display of batting power propelled Watford Haidery to their first Watford Observer Fourteen14 Shield triumph for 30 years as holders Abbots Langley were swept aside by more than 100 runs in last night’s final.

With cases of the flu reaching epidemic levels, it is critical businesses maintain a healthy work environment.

Popularized in 2017, the windshield phenomenon is used to describe the lack of insects on a windshield after a drive, a sign of a dwindling bug population.

The “significant” breaches meant some customers did not get annual review statements for up to six years.

Connect Connector-Terminal Block Conversion Units (XW2[]) to I/O Units for Programmable Controllers with one touch.(XW2Z (Standard-type))

RxBioLabs has started production of CimexiShield the only topical Bed Bug repellent for skin and features 2 types of Bed Bug Relief for travel.

Don't you miss last year, when we were killing each other with weapons rather than airborne droplets? When mass shootings and home invasions dominated the news, a company called Battenshield rolled out their design for a virtually unbreakable door barricade.

It's not the greatest-looking thing in the world, but I will say the functionality of the design is clever, along with half of the installation. The system with the battens simply hangs on the door.

What I'd worry more about is the ability of the average homeowner to install the brackets (particularly over trim with a wavy cross-section) and get the lags driven into the studs.

Interestingly enough, the system was designed by a former SWAT officer whose role was, you guessed it, the "entry team member" who breaches doors.

A glass ceramic as cooktop for induction heating having improved colored display capability and heat shielding is provided. The cooktop includes a transparent, dyed glass ceramic plate having high-quartz mixed crystals as a predominant crystal phase. The glass ceramic contains none of the chemical refining agents arsenic oxide and/or antimony oxide and has a transmittance values greater than 0.4% at at least one wavelength in the blue spectrum between 380 and 500 nm, a transmittance >2% at 630 nm, a transmittance of less than 45% at 1600 nm, and a light transmittance of less than 2.5% in the visible spectrum.

A self-shield open magnetic resonance imaging superconducting magnet comprises five pairs of coils: shim coils, first main magnetic coils, second main magnetic coils, third main magnetic coils, and shielding coils. The five pairs of coils are symmetric about the center. The shim coils are arranged closest to the center point; the first main magnetic coils, the second main magnetic coils, the third main magnetic coils, and the shielding coils are arranged in sequence outside. The first main magnetic coils are connected with reverse current. The second and third main magnetic coils are connected with positive current for providing the main magnetic field strength. The shim coils are connected with positive current for compensating the magnetic field in the central region. The shielding coils are connected with reverse current for creating a magnetic field opposite to the main magnetic field for compensating the stray magnetic field in the space.

An implantable medical device (IMD) can include a cardiac pacemaker or an implantable cardioverter-defibrillator (ICD). Various portions of the IMD, such as a device body, a lead body, or a lead tip, can be provided to reduce or dissipate a current and heat induced by various external environmental factors. According to various embodiments, features can be incorporated into the lead body, the lead tip, or the IMD body to reduce the creation of an induced current, or dissipate the induced Current and heat created due to an induced current in the lead. For example, an IMD can include at least one outer conductive member and a first electrode. The first electrode can be in electrical communication with the at least one outer conductive member. The first electrode can dissipate a current induced in the at least one outer conductive member via a first portion of the anatomical structure.

A driveline shield system having a cap disposed to releasably engage a bearing mounted adjacent a drive shaft. The cap supports a tubular guard or shield in a coaxial position relative to the drive shaft. One or more lugs on the bearing are disposed to seat in corresponding slots formed in the cap. When the lugs are seated in the slots, rotation of the cap relative to the bearing causes the bearing and the cap to engage one another. A U-shaped clip is pivotally mounted to the cap and rotatable between a first position in which the clip extends into the slot and secures the lugs in engagement with the cap and a second release position in which the clip is retracted from the slot, thereby permitting relative rotation between the cap and bearing.

Approaches to improving hard disk drive far track interference problems include utilizing a wrap-around shield having recessed high magnetic moment layer(s). Embodiments include tapering the high-moment portion away from the air bearing surface (ABS) in the cross-track direction away from the write pole, thereby reducing exposure of high moment layers at the ABS to reduce the risk of unwanted track erasure away from the main pole. Embodiments include positioning the high magnetic moment layers in their entirety away from the ABS, such as with a laminate structure of high magnetic moment and low magnetic moment materials laid down in a direction away from the pole tip trailing edge.

A method and system provide a magnetic transducer having an air-bearing surface (ABS). The method provides a first read sensor stack and defines a first read sensor in a stripe height direction from the first read sensor stack. The stripe height direction is perpendicular to the ABS. A shield is provided on the first read sensor stack and in a down track direction from the first read sensor stack. A second read sensor stack is provided. The shield is between the first read sensor and the second read sensor stack in the down track direction. Both the first read sensor and the second read sensor are defined from the first read sensor stack and from the second read sensor stack, respectively, in a cross-track direction. The cross-track direction is substantially perpendicular to the down track direction and substantially perpendicular to the stripe height direction.

A two-dimensional magnetic recording (TDMR) read head has upper and lower read sensors wherein the lower read sensor has its magnetization biased by side shields of soft magnetic material. The center shield between the lower and upper sensors may be an antiparallel structure (APS) with two ferromagnetic layers separated by an antiparallel coupling (APC) layer. The center shield has a central region and two side regions, but there is no antiferromagnetic (AF) layer in the central region. Instead the two side regions of the upper ferromagnetic layer in the APS are pinned by AF tab layers that are electrically isolated from the upper sensor. The upper ferromagnetic layer and the APC layer in the APS may also be located only in the side regions. The thickness of the center shield can thus be made thinner, which reduces the free layer to free layer spacing.

Disclosed herein is a method for preparing a near infrared shielding fiber. The method includes the steps of preparing and compounding a composition, then pelletizing the compounded composition to obtain the near-infrared shielding masterbatch, and melt spinning the near-infrared shielding masterbatch into the near-infrared shielding fiber. The composition includes at least one metallic ionic compound powder in an amount of about 1-25 wt %, a cross-linking agent in an amount of about 0.1-2 wt %, a thermoplastic polymer in an amount of about 67-98.7 wt %, a cross-linking initiator in an amount of about 0.1-1 wt %, and a dispersing agent in an amount of about 0.1-2 wt %.

The scroll refrigeration compressor includes a sealed casing, stationary and moving volutes including spiral wraps engaged in one another and defining the variable-volume compression chambers, a delivery chamber defined by the plate of the stationary volute and the sealed casing, a heat shield disposed in the delivery chamber and dividing the delivery chamber into a first volume defined by the plate of the stationary volute and the heat shield and a second volume defined by the heat shield and the sealed casing, and at least one flow passage arranged to communicate the first and second volumes. The compressor further includes at least one bypass passage arranged to communicate the first volume with an intermediate compression chamber, and at least one bypass valve disposed in the first volume and movable between closing and opening positions for closing and opening the corresponding bypass passage.

A windshield wiper arm bracket includes a pair of side walls. Each of said side walls include at least one centrally located pin arm receiving hole formed therein. The bracket also includes a post attaching the pair of side walls together. The post is for receiving a pin arm adaptor thereon. The bracket also includes an attachment arm formed on a bottom of each of the pair of side walls. The attachment arms are for connecting the bracket to a windshield wiper assembly. An adaptor for a windshield wiper arm bracket includes a top portion and a web portion. The web portion includes a central aperture formed therein. The central aperture includes a first portion for receiving a post of the windshield wiper arm bracket and a second aperture for receiving a pin arm of a windshield wiper arm.

Provided is a liquid crystal display including, on an insulation substrate having a polygonal display area and a peripheral area surrounding the display area a first signal line, a second signal line crossing the first signal line, a plurality of switching elements connected to the first signal line and the second signal line and disposed in the display area, a plurality of pixel electrodes each connected to the switching element and disposed in the display area, and a shielding conductor disposed in the peripheral area and extending along at least one side of the polygonal display area.

A system, method and apparatus for providing additional radiation shielding to a ventilated cask for holding high level radioactive materials. The invention utilizes a tubular shell that is ancillary to the ventilated cask that circumscribes the ventilated cask to add radiation shielding protection while improving heat removal by natural convective air flow. Because the tubular shell and cask are non-unitary and slidably separable from one another, crane lifting capacity is not affected. In one aspect, the invention is an apparatus for providing additional radiation shielding to a cask holding high level radioactive materials comprising: a tubular shell extending from an open bottom end to an open top end, the tubular shell having an inner surface that forms a cavity about a longitudinal axis; a plurality of primary apertures forming passageways through the tubular shell and circumferentially arranged in a spaced-apart manner about the tubular shell; a plurality of secondary apertures forming passageways through the tubular shell and circumferentially arranged in a spaced-apart manner about the tubular shell; and an annular seal coupled to the tubular shell and extending from the inner surface of the tubular shell; wherein the secondary apertures are located at an axial height above the annular seal and the primary apertures are located at an axial height below the annular seal.

A gas-insulated type circuit breaker including a housing defining a gas volume for a dielectric insulation gas; a first arcing contact member and a second arcing contact member, wherein the first arcing contact member and the second arcing contact member are movable relative to each other along an axis; a first nominal contact member and a second nominal contact member, wherein the first nominal contact member and the second nominal contact member are movable relative to each other along the axis; and a first nominal contact shielding arrangement including an inner shield member and an outer shield member, wherein the inner shield member and the outer shield member are arranged coaxially about the axis. The first nominal contact member is arranged co-axially between the inner shield member and the outer shield member, and is movable relative to the inner shield member and to the outer shield member.

A port shield assembly includes a cup, a fitting, and a retaining pin. The cup includes a top with a hole, a sidewall, a cavity defined by the top and the sidewall, and a side port in the side wall. The fitting includes a body with a first end and a second end, a flange at the first end, and a central bore extending from the first end. The fitting also includes a port that communicates with the central bore, and a cross bore near the second end. The fitting extends through the hole of the cup and a retaining pin is disposed in the cross bore to retain the cup between the first end and the second end of the fitting.

An assembly for shielding an aircraft from electromagnetic energy may include a window mounting configured to be conductively coupled to an aperture in a fuselage of an aircraft. The window mounting may include a window pane having an electromagnetically-reflective coating for reflecting electromagnetic energy. The window pane may remain electrically isolated from the fuselage prior to the electromagnetic energy exceeding a frequency of approximately 1 GHz. The window mounting may further include a capacitive gasket capacitively coupling the window pane to the fuselage after the frequency of the electromagnetic energy reflected by the window pane exceeds approximately 1 GHz.

According to one embodiment, a windshield attachment device for coupling a windshield to a body includes a fastener portion, a bolt, and an elastomeric load isolator. The fastener portion has an opening therethrough. The bolt is configured to extend through the opening of the fastener portion and couple the fastener portion to the body. The elastomeric load isolator surrounds at least a portion of the fastener portion and separating the fastener portion from the windshield.

A variable length light shield is disclosed for an electro-optical sensor within a nose cone. The light shield includes a base, a telescopic shade supported by the base, and a ring rotatably supported about the base. The light shield also includes a guide tube disposed proximate the ring with an end extending away from the ring about a side of the telescopic shade. The light shield further includes an extension spring supported by the guide tube with an end coupled to the telescopic shade. Additionally, the light shield includes a cable extending through the guide tube and the extension spring, with one end of the cable coupled to the ring and another end of the cable coupled to the telescopic shade. The extension spring is configured to exert a force on the telescopic shade to extend the telescopic shade. Rotation of the ring causes retraction of the telescopic shade.

A shield for a fluid dispenser includes a mount structure and a fluid-deflecting structure defining an interior flow passage. The mount structure is configured to be attached to an actuator of a fluid dispenser. Fluid dispensers and fluid dispenser systems are also disclosed.

A reductant delivery unit (10) includes a fluid injector (12) and a flange (20) coupled with the fluid injector. An exhaust boss (28) has a surface (39) defining a through-hole (40) that communicates with a vehicle's exhaust flow path. The flange is coupled to a mounting surface such that the outlet of the fluid injector communicates with the exhaust flow path so as to control injection of urea solution into the exhaust gas flow path. A gasket (32) is sandwiched between the flange and the mounting surface. The gasket has a surface (37) defining a through-hole (38) therein that communicates with the through-hole in the exhaust boss to permit the urea solution to pass from the fluid outlet to the exhaust flow path. Gasket shielding structure (44) covers the surface defining the through-hole in the gasket to prevent the urea solution from contacting the gasket.

A scalpel handle for holding a blade having a cutting edge includes a handle member and a blade shield for covering the blade cutting edge. The blade shield is connected to the handle member for pivotal movement relative thereto between a blade-covering condition and an out-of-the-way condition, and a movable shield latch mechanism is capable of releasably locking the blade shield in its blade-covering condition. A finger-operable actuator mechanism is mounted upon the handle member for movement between first and second conditions, and a spring is interposed between the actuator mechanism and the handle member. During a first phase of movement of the actuator mechanism from its first to its second condition, the shield latch mechanism unlocks the blade shield from its locked blade-covering condition, and during a second phase of movement, the blade shield is moved from its blade-covering condition to its out-of-the-way condition.

The invention relates to carrying cases for wireless devices including cell phones, wireless tablets and laptop PC's which provide EMF shielding for the user. The wireless devices are inserted into a case comprising EMF shielding material and a cover including shielding material is flipped thereover to provide further radiation protection. The case involves several embodiments such as a flat flip case, a fixed bent edging flip case and a flexible folding edge flip case. A flip type case shielded cover added to existing wireless device open faced skin covers. Another embodiment of the invention involves a wireless device pocket shield wherein a shielded insulation envelope having a wireless device placed therein is dropped into an apparel pocket.

A method for controlling thermal cycling of a faraday shield in a plasma process chamber is provided. The method includes: performing a first plasma processing operation on a first wafer in the plasma process chamber; terminating the first plasma processing operation; performing a first wafer transfer operation to transfer the first wafer out of the chamber; and, during the first wafer transfer operation, applying power to a TCP coil under a plasma limiting condition.

A shield apparatus is mounted on the header of an agricultural implement which includes a rotatable collecting member to direct collected material rearwardly towards a rear discharge opening. The shield apparatus includes a panel member and a mounting bracket assembly which supports the panel member above the rear discharge opening of the header spanning in a lateral direction transversely to the forward working direction such that the panel member extends from a rear edge rearward of the collecting member to a front edge which is spaced forward and upwardly in relation to the rear edge. The shield apparatus ensures that material thrown upwardly above the rear of the header frame is redirected downwardly into the rear discharge opening of the header for collection by the implement in the usual manner. The shield apparatus does not interfere with the visibility of the operator when the panel member is clear.

The present application is directed to gas generators comprising a fuel mixture and a catalyst. The catalyst is contained in a self-regulated reactor or buoy, and selectively opens and closes to produce a gas in accordance with the demand for gas. This fuel mixture is generally a solution formed by dissolving a solid fuel component in a liquid fuel component. The mixing preferably occurs before the first use, and more preferably occurs immediately prior to the first use. The inventive gas generators preferably further comprises a starting mechanism that isolates the solid fuel from the liquid fuel or vice versa before the first use. In one embodiment, the starting mechanism further comprises a catalyst shield mechanism that isolates the catalyst in the reactor or buoy from the liquid and/or the solid fuel prior to the first use.

An electrical assembly has a lead frame with a plurality of elongated conductor sets and an insulative housing. Each conductor set has two differential signal pair conductors between a first ground conductor and a second ground conductor. A slot extends through the insulative housing and at least partially exposes the first ground conductor of a first conductor set and the second ground conductor of a second conductor set. A first ground shield has a first tab bent inward that extends into the slot from a first side of the lead frame. A second ground shield has second tab bent inward that extends into the slot from a second side of the lead frame. A conductive medium is provided in the slot to electrically connect the first tab, the second tab, the first ground conductor and the second ground conductor.

The invention relates to a shielded connector for a motor vehicle. The connector comprises at least one casing shielding element. The shielding element includes a cable outlet portion provided with a plurality of resilient tabs that are integral with the shielding element. The tabs include a contact zone in electrical contact with a ferrule crimped to a shielding braid of a cable. The contact zone is maintained pressed against the shielding braid by means of a removable clamping ring.

A formable structure comprises a first material having a first level of viscosity and a second material having a second level of viscosity, wherein the second material is formed to hold at least a portion of the first material in a particular position or a particular shape. The first material can be configured to function as a thermal interface between two or more hardware components. The second material can be configured to have a higher viscosity than the first material. In one illustrative example, the second material can include a light-activated resin that is configured to harden when exposed to one or more treatments. By the use of the first material and second material, the techniques disclosed herein are adaptable to gaps having a wide range of sizes, which is difficult to do with traditional thermal interface materials. The second material can also function as an EMI shield.

A composite shield comprises a panel including an outer thin metallic strike surface layer, a highly strain rate hardening polymer layer and an inner structural armor plate layer. The structural armor plate layer has a multiplicity of traversing ports. The traversing ports have sufficient lateral area to allow deformation of the thin metallic strike surface layer and highly strain rate hardening polymer layer through the structural armor plate layer on the occurrence of explosive blast.

A needle tip for an injection device includes a body having a front portion, a back portion configured to be removably connected to the pre-loaded injection device, and a wall separating the front and back portions. A hollow needle has a first piercing portion projecting back from the separating wall and a second piercing portion projecting forward from the separating wall. A safety shield that is axially movable relative to the body at least between an initial position, a retracted position, and a post use locking position. This Abstract is not intended to define the invention disclosed in the specification, nor intended to limit the scope of the invention in any way.

The heat shield assembly includes an inner-most layer that is directly engagable with an exhaust component and is of a non-ceramic material with a first heat capacity and a first thermal conductivity. The heat shield assembly additionally includes an insulating layer that surrounds the inner-most layer and is of a material that has a second heat capacity which is lower than the first heat capacity and has a second thermal conductivity which is lower than the first thermal conductivity. The direct engagement of the inner-most layer with the exhaust component allows heat to be easily transferred between the exhaust component and the inner-most layer.

In this podcast, Thomas Domville introduces us to AdGuard Pro for iOS. AdGuard Pro is More than just ad blocking in Safari! It’s the most effective adblock browser plugin with data tracking prevention. With AdGuard Pro you can select different DNS service providers, which opens new possibilities: faster and more reliable internet access both for Wi-Fi and cellular connections, parental control, protection from phishing and malware and shielding your DNS traffic against interception and snooping. Add to this the Privacy module that detects trackers in real time and lets you decide which to block and which to let through. And all this on top of the excellent ad blocking in Safari, which has already proven to be of an unrivaled quality by the free AdGuard for iOS version.

‎AdGuard Pro — adblock on the App Store
https://itunes.apple.com/us/app/adguard-pro-adblock/id1126386264?mt=8

Faculty, staff and some students with the College of Engineering and Technology at Western Carolina University are using 3D printers at the college's Rapid Center to develop visors for face shields for use by healthcare workers in the fight against the COVID-19 pandemic. Patrick Gardner, Director of the WCU Rapid Center, was i nterviewed in this Friday Feature piece. The interview first aired on April 17, 2020. Posted by Host and Producer of The Friday Feature- Paul Foster, WNCW Senior Producer, News Director, and Morning Edition Regional Host

Authorities reveal the residents of a Sunshine Coast aged care facility were trapped inside as a dangerous bushfire approached this week, but they were kept safe by a protective ring of firefighters.