A grassfire was ignited next to a runway at Sydney Airport following a reported engine explosion on a Qantas flight upon takeoff

A significant explosion at Indian Oil Corporation's Mathura refinery injured at least 10 workers, with four in critical condition. Eyewitnesses reported flames visible from afar.

A massive explosion at Indian Oil Corporation's Mathura refinery injured 12 people, prompting an investigation into the incident's cause.

At least 20 people were killed, and 46 others were injured after an explosion occurred at the Quetta Railway Station in Pakistan's Balochistan on Saturday, i.e., November 9.

Gadani is world’s third—largest shipbreaking centres — after Alang and Mumbai — where more than 15,000 workers are directly employed while another two million indirectly earn their livelihoods from it.

Severity of injuries varies, with one victim in critical condition and seven others on ventilator support even as 101 continue to undergo treatment at various hospitals; Kasaragod District Police has announced a Special Investigation Team to probe the incident; district administration said that the additional divisional magistrate has been directed to carry out an inquiry separately into the incident and submit a report.

BJP alleges that low-intensity Chinese-made firecrackers were stored in a shed on temple grounds and the explosion only destroyed shed’s roof, while CPI(M) urges political leaders to avoid blame games during a sensitive time

7 persons among the injured are on ventilator support; Kasaragod District Police has announced a Special Investigation Team (SIT) to probe the incident; the district administration said that the additional divisional magistrate has been directed to carry out an inquiry separately into the incident and submit a report

The strike came hours after the Israeli military announced an expansion of the zone, where it has told Palestinians evacuating from other parts of Gaza to take refuge

Disaster's cause as yet unknown; multiple casualties, says report.

Shoes continue to drop in the investigation into the Trump campaign's possible connections to Russia. Yesterday, speculation that the FBI was looking into the Trump family was confirmed by reports that Jared Kushner, the president's son-in-law and senior advisor, is under scrutiny. More details are emerging about the investigation.

Enter the Washington Post:

Jared Kushner and Russia’s ambassador to Washington discussed the possibility of setting up a secret and secure communications channel between Trump’s transition team and the Kremlin, using Russian diplomatic facilities in an apparent move to shield their pre-inauguration discussions from monitoring, according to U.S. officials briefed on intelligence reports.

Ambassador Sergei Kislyak reported to his superiors in Moscow that Kushner, then President-elect Trump’s son-in-law and confidant, made the proposal during a meeting on Dec. 1 or 2 at Trump Tower, according to intercepts of Russian communications that were reviewed by U.S. officials. Kislyak said Kushner suggested using Russian diplomatic facilities in the United States for the communications.

The meeting also was attended by Michael Flynn, Trump’s first national security adviser.

This story hasn't been confirmed by other publications, so take it with the weight of a single report based on anonymous sources, but having said that: Yikes.

Go read the whole thing.

'I'm trying to understand about Armenia because obviously it has to do with my children,' Scott Disick asked Kim Kardashian, ahead of her trip with sister Kourtney.

The numerous technical and operational breakdowns that contributed to the Deepwater Horizon oil rig explosion and spill from the Macondo well in the Gulf of Mexico suggest the lack of a suitable approach for managing the inherent risks.

To make the world safer against future infectious disease threats, national health systems should be strengthened, the World Health Organization’s emergency and outbreak response activities should be consolidated and bolstered, and research and development should be enhanced, says a new Policy Forum article that appears in the May 19 edition of PLOS Medicine.

The National Academies Committee on Genetically Engineered Crops - Past Experiences and Future Prospects authored an almost 600-page landmark report, released in May 2016. It was perhaps the most comprehensive analysis of genetically engineered crops to date.

Policymakers’ efforts to reduce threats from improvised explosive devices (IEDs) should include greater oversight of precursor chemicals sold at the retail level – especially over the Internet – that terrorists, violent extremists, or criminals use to make homemade explosives, says a new report from the National Academies of Sciences, Engineering, and Medicine.

Biologists use weapons to harass Oregon sea lions into leaving an area populated by endangered salmon and other fish.

Strange, gigantic explosions fueled by solar energy detonate just above the surface of Venus, a new study finds.

A star from a distant galaxy produced the most intense X-ray blast ever.

Astrophysicist is using 3-D images generated by a supercomputer to understand what happens with a supernova explodes.

Authorities are still searching for possible victims after a natural gas explosion outside a popular restaurant sparked.

Tuesday, Jan. 28 marked the 28th anniversary of the destruction of the space shuttle Challenger and loss of the crew.

Chesapeake Energy, which has one of the largest natural gas recovery operations in the country, halts all fracking in the state after a spill on the eve of the

Yes, you read that right.

The collision between these stars in 2083 will be impossible to miss.

The explosion detected in a galaxy 390 million light-years from Earth was 5 times more energetic than anything seen before, but it's no Big Bang.

Mr. Poploskie was recognized as the 2018 Pennsylvania State Athletic Director of the Year for the Philadelphia region

These globally-deployed products, integrated with the company's innovative sensors, enable rapid detection and identification of various threats

Newest real-time strategy mobile game is here. Battle against millions of players worldwide.

A manhole cover assembly configured to behave as a relief valve in an explosion event, opening so that fluid, such as air or explosive gas, may vent from an underground area. The manhole cover assembly may include a manhole cover and a frame, and may be configured to limit movement of the manhole cover with respect to the frame in response to increased pressure on the manhole cover. In one embodiment, the manhole cover may include legs that are configured to enable a range of movement of a portion of the cover such that the cover can be unseated at an angle with respect to the frame to allow fluids to escape from the underground area.

A system for ventilating an explosion hazard region of an aircraft includes a ram-air channel, which has an air inlet for feeding ambient air into the ram-air channel as well as an air outlet. The ram-air channel is devised to feed air to a device that is to be cooled on board the aircraft. A ventilation line has an air inlet for feeding air flowing through the ram-air channel into the ventilation line as well as an air outlet. The ventilation line is devised to feed air to a region of the aircraft that is to be ventilated. An accumulator is disposed between the ram-air channel and the air inlet of the ventilation line and is devised to convert the dynamic pressure of the air flow conveyed through the ram-air channel at least partially into static pressure for regulating flow through the explosion hazard region.

Apparatus and methods for determining the absence or presence of contraband in an object with a fast neutron source for irradiating the object; a detector for measuring γ-rays emitted by the irradiated object from energy state relaxation as a result of neutron capture, typically after the object has been irradiated.

Apparatus and methods are disclosed for rapidly counteracting a transient low-pressure condition, that can occur intermittently in the exhaust section of a power plant or other such industrial facility upstream of exhaust fans as a result of an event that interrupts the generation and/or flow of exhaust gases, using jet nozzles disposed in the exhaust section and connected to a source of pressurized air or other suitable momentum material. By orienting the jet nozzles in a direction generally opposite to the flow of exhaust gas and actuating the system to release a burst of compressed air, for example in the event of a power plant interruption, the low-pressure condition can be ameliorated preventing damage to the exhaust section.

The invention relates to methods for forming an emulsion explosive composition and to methods for sensitizing an emulsion explosive composition. The methods involve the in-situ expansion of organic microspheres during the formation of the emulsion explosive composition.

The present invention is directed to a method for production preformed fabrication casing or associated parts intended to generate fragments initiated by the explosive of contained warhead charges. Molded parts having fragmentation bodies (4, 21, 34) embedded therein are produced by a two-stage powder compaction method followed by sintering together the compacted powder metal. The method described in the present invention defines how in an initial stage the fragmentation bodies (4, 21, 34) are fixed in position using a fixture (2) after which the bodies are covered with powder metal that is then compacted until the powder forms a single molded part (2) after which the fixture is replaced with a secondary quantity of powder that is also compacted to form a self-supporting unit (12) together with the first quantity of powder.

A method is provided for producing a large-calibre explosive projectile having a projectile casing with an ogival front part, which surrounds an internal area filled with a plastic-bonded explosive charge and, at a nose end, has a mouth closed by a nose fuze, wherein an elastic liner is arranged between the explosive charge and the inner wall of the projectile casing. The projectile casing is produced in two parts, such that, in the direction of the longitudinal axis of the projectile casing, a tail-end projectile casing section and an annular front projectile casing section, which contains the mouth, can be connected to one another in the area of the ogival front part, via a screw connection. The liner is introduced into the tail-end projectile casing section and the explosive charge is introduced into the liner before the two projectile casing sections are connected to one another.

A method and system to detect an improvised explosive device is disclosed. In a particular embodiment, the method includes dispersing a mixture containing a fluorescent material uniformly over a ground cover, illuminating the ground cover with wavelengths of visible light or ultraviolet (UV) light causing the fluorescent material to fluoresce in a visible light spectrum, and detecting where the mixture has been disturbed on the ground cover by visually observing inconsistencies in the fluorescent material on the ground cover that is fluorescing to indicate a location of the improvised explosive device. The method also includes that the mixture is adapted to cling to a person, clothes, or any combination thereof, upon contact.

A method of making a liner for a shaped charge or an explosively formed projectile may include making a liner substrate using a 3D additive manufacturing process. At least a portion of the surface of the liner substrate may be surface finished. The surface finished portion may be electroplated with a metal to form a multi-layer liner.

The invention relates to a method of with a projectile (1) comprising a reactive charge (4), combating an explosive-charged weapon unit (7), preferably an enemy shell, so that undesirable harmful effects on the environment are reduced, wherein the projectile (1) is configured to penetrate the surface (8) of the weapon unit (7) upon impact so that a passage (9) is opened into the explosive (10) of the weapon unit (7), through which passage (9) the reactive charge (4), under the influence of the kinetic energy of the projectile (1), is transferred to the explosive (10) of the weapon unit (7). The method can be deemed to be characterized in that the reactive charge (4), upon contact with the explosive (10) of the weapon unit (7), reacts and starts a hypergolic reaction with the explosive (10). The invention also relates to a projectile (1) for the said method.

The present invention provides a method for explosively destroying munitions in an overpacked container within a sealed detonation chamber, utilizing a plurality of specially shaped linear-shaped charges and/or a combination of special linear-shaped charges in conjunction with an explosively formed projectile, resulting in penetrating both the side wall of the overpacked container and the side wall of the projectile.

Disclosed is a system for detonating a buried explosive device by discharging an electric discharge with at least five joules of energy to detonate the buried explosive device.