https://kottke.org/20/05/pandemic-creativity-edible-versions-of-famous-artworks

We all know about the new coronavirus that has been affecting hundreds of thousands of people worldwide. And while scientists, researchers, and doctors are all working tirelessly to find a cure for this terrible disease, one thing is for sure: staying home is saving lives. The greatest tool that we have right now to help […]

Read More at Check Out These Famous Logos Practicing Social Distancing – McDonald’s, Mercedes, and More

Pictures and video from an action camera can be awesome. But how do you get the best shots? It’s all about the mounting of the camera and we’re going to tell you how to do it. How and where do you mount an action camera? The most popular place to mount an action camera is on a helmet using a Continue Reading

The post How (And Where) To Mount an Action Camera (On Anything!) appeared first on Photodoto.

Tags: Jukebox, music, neural network, OpenAI

I thought we (i.e. me) could use a break, so I made these abstract charts to represent the most popular quotes about hope.

Tags: hope, quote

We present a new mouse cursor designed to facilitate the use of the mouse by people with peripheral vision loss. The pointer consists of a collection of converging straight lines covering the whole screen and following the position of the mouse cursor. We measured its positive effects with a group of participants with peripheral vision loss of different kinds and we found that it can reduce by a factor of 7 the time required to complete a targeting task using the mouse. Using eye tracking, we show that this system makes it possible to initiate the movement towards the target without having to precisely locate the mouse pointer. Using Fitts' Law, we compare these performances with those of full visual field users in order to understand the relation between the accuracy of the estimated mouse cursor position and the index of performance obtained with our tool.

In this paper, we continue our prior work on using imitation learning (IL) and model free reinforcement learning (RL) to learn driving policies for autonomous driving in urban scenarios, by introducing a model based RL method to drive the autonomous vehicle in the Carla urban driving simulator. Although IL and model free RL methods have been proved to be capable of solving lots of challenging tasks, including playing video games, robots, and, in our prior work, urban driving, the low sample efficiency of such methods greatly limits their applications on actual autonomous driving. In this work, we developed a model based RL algorithm of guided policy search (GPS) for urban driving tasks. The algorithm iteratively learns a parameterized dynamic model to approximate the complex and interactive driving task, and optimizes the driving policy under the nonlinear approximate dynamic model. As a model based RL approach, when applied in urban autonomous driving, the GPS has the advantages of higher sample efficiency, better interpretability, and greater stability. We provide extensive experiments validating the effectiveness of the proposed method to learn robust driving policy for urban driving in Carla. We also compare the proposed method with other policy search and model free RL baselines, showing 100x better sample efficiency of the GPS based RL method, and also that the GPS based method can learn policies for harder tasks that the baseline methods can hardly learn.

Forty years ago, Mount St. Helens in southwestern Washington was just days away from a devastating eruption. When the mountain finally did blow, after weeks of frequent quakes and ash belching, on the morning of May 18, 1980, it caused the deadliest and most economically destructive volcanic event in U.S. history.…

If you've ever been compelled to visit Chewelah, it has likely been related to a trip to 49 Degrees North.…

Polyamide molding materials for transparent molding parts. The materials comprise transparent copolyamides that contain: (A) 40 to 100 wt % of at least one transparent copolyamide with a glass transition temperature (Tg) of at least 80° C. and not more than 150° C., composed of at least two diamines that are different from each other, wherein the at least two diamines are a mixture of (a) 50 to 90 mol % bis-(4-amino-3-methylcyclohexyl)methane (MACM) and/or bis-(4-amino-3-ethylcyclohexyl)methane (EACM) and/or bis-(4-amino-3,5-dimethylcyclohexyl)methane (TMACM) and b) 10 to 50 mol % aliphatic diamine having 9 to 14 carbon atoms, in particular decandiamine, particularly preferably at least 20 mol % decandiamine, each relative to the total amount of diamines, and of one or more aliphatic dicarboxylic acids, having 6 to 36 carbon atoms, (B) 0 to 60 wt % of at least one further polymer, (C) 0 to 10 wt % of additives, the sum of the components (A), (B) and (C) totaling 100% by weight.

To provide a glass ceramic body wherein the deterioration of the reflectance due to black coloration is suppressed, and the unevenness of the firing shrinkage is suppressed. A glass ceramic body comprising a glass matrix and alumina particles dispersed therein, wherein the glass matrix is not crystallized, a ceramic part composed of the dispersed alumina particles has an α-alumina crystal structure and a crystal structure other than the α-alumina crystal structure.

A method of adjusting a speed of a mobile machine is provided. Image data of a location is collected where currently generated sensor data and previously generated sensor data indicate a discontinuity in sensor data. The image data is analyzed to determine if a non-motion blur score for the image data is above a threshold value. Then, a speed of the mobile machine is adjusted based on a determination that the non-motion blur score is above the threshold value.

A technique is provided for post selection location of a mouse pointer icon in a display screen of a computing device. A software tool receives input of the post selection location for the mouse pointer icon. The post selection location defines a default location to move the mouse pointer icon in response to a window action taken on a window displayed in the display screen. In response to the window action in which the mouse pointer icon is initially displayed at a selection location corresponding to the window action, the mouse pointer icon is moved to the post selection location such that the mouse pointer icon is displayed at the post selection location in the display screen.

PCT No. PCT/CH96/00292 Sec. 371 Date May 22, 1998 Sec. 102(e) Date May 22, 1998 PCT Filed Aug. 23, 1996 PCT Pub. No. WO97/08592 PCT Pub. Date Mar. 6, 1997A method by which an elastomer is applied to a model (1) with relief marks to be reproduced. The purpose of the elastomer once set is to form a mold membrane (14) and incorporate within its own material the shape of the marks on the model. The mold membrane is then separated from the model and filled with a setting material, and the mold membrane is applied to a support in order to transfer the marks after preliminary pasting.

A locking system for axially securing a rotor onto a rotatably mounted shaft. The arrangement includes a plurality of locking levers which are each pivotably mounted about axes extending perpendicularly to the shaft between a locking position and an unlocking position in planes containing the axes. The locking levers can each be automatically transferred between an unlocking position and a locking position depending on rotational speed. The locking levers are mounted on the rotor and an annular groove is provided on the shaft and engages with the locking levers in the locking position, wherein the locking levers are prestressed in the unlocking position. Advantageously, the rotor can be both installed and removed without tools by merely placing the rotor onto or removing the rotor from the shaft, in each case depending on rotational speed.

An intracorporeal autonomous active medical device having a capsule body and a base. The capsule body includes a body portion and a lid portion, and the capsule body contains therein electronic circuitry containing the active elements of the autonomous medical device, and a power supply. The capsule body also includes a fastening system on an exterior surface of the capsule body that is configured to correspond with a fastening mechanism on the base configured to be anchored to a tissue wall. The fastening mechanism provides selective engagement between the capsule body and the base.

An implantable head-mounted unibody peripheral neurostimulation system is provided for implantation in the head for the purpose of treating chronic head pain, including migraine. The system may include an implantable pulse generator (IPG) from which multiple stimulating leads may extend sufficient to allow for adequate stimulation over multiple regions of the head, preferably including the frontal, parietal and occipital regions. A lead may include an extended body, along which may be disposed a plurality of surface metal electrodes, which may be sub-divided into a plurality of electrode arrays. A plurality of internal metal wires may run a portion of its length and connect the IPG's internal circuit to the surface metal electrodes. The IPG may include a rechargeable battery, an antenna, and an application specific integrated circuit. The IPG may be capable of functional connection with an external radiofrequency unit for purposes that may include recharging, diagnostic evaluation, and programming.

A mounting assembly for mounting a transducer to a plumbing fixture is provided. The mounting assembly includes a bracket configured to be affixed to an exterior wall of the plumbing fixture. The mounting assembly further includes a shield defining an internal cavity and configured to be removably coupled to the bracket. The shield is configured to be coupled to the transducer and to enclose at least a portion of the transducer within the internal cavity.

The invention relates to a method and a device for producing a moulded body having microstructures from moulding material. The method for producing a moulded body having microstructures on a carrier out of moulding material is effected by inputting a moulding material into a container (10) comprising a mould cavity (14), wherein at least one micro-structured mould (12) is provided in the mould cavity. Furthermore, the centrifugation of a container (10) is carried out until the moulding material has completely entered into the structure of the mould (12). Thereafter, the curing of the moulding material is carried out to form a moulded body having microstructures, which is then removed from the mould (12) and the container (10). A container (10) is provided into which the mould (12) has been inserted, and the container (10) is connectable to a centrifuge wherein the container (10) comprises a mould cavity for receiving the moulding material wherein the mould cavity (14) comprises at least one micro-structured mould (12).

A fastener for quick-mounting a cymbal to an upright cymbal support rod comprising a pair of half-round sleeve members arranged in face-to-face relationship forming a cylindrical surface therebetween for grasping the cymbal mounting rod; a tab extending upward from each sleeve member including means for pivoting said members near said tabs so that, by squeezing said tabs together, said sleeve members are pivoted away from each other; a pair of split flange members, one attached to the lower end of each sleeve member, spaced apart from said tab, arranged in co-planar alignment when said members are in adjacent contact to form a planar compression surface for pressing toward a cymbal placed on the cymbal mounting rod; and, means for biasing said sleeve members into full contact about the cymbal mounting rod threaded end to hold the cymbal on the rod.

A microphone holder for mounting a microphone on a drum includes a vertical plate having an inner side surface which is adapted to face the drum, and a microphone connecting device, a clip member, and a positioning plate connected fixedly to the vertical plate. The microphone connecting device is adapted to hold the microphone thereon. The clip member clamps a vertical bolt that interconnects a drum body and a drum skin frame. The positioning plate is disposed above the clip member, and has a horizontal top plate section with a bottom surface that is adapted to abut against an upper end of the vertical bolt, and two vertical side plate sections which extend respectively and integrally from two opposite sides of the top plate section, and which are adapted to flank a projection on the drum skin frame through which the vertical bolt extends so as to prevent rotation of the clip member on the vertical bolt.

The invention relates to an apparatus for mounting a percussion instrument onto a stand. The apparatus comprises a support portion and a retaining portion, the support portion comprising a support member arranged for attachment to the stand and including a shaft, the retaining portion comprising a gripping member having a pair of elements spaced apart from each other and one or more spreader means arranged to urge the spaced apart elements away from each other, wherein the support and retaining portions are adapted to mount the percussion instrument therebetween, the shaft engageable with the retaining portion, the elements of the gripping member normally biased to a first position that is capable of retaining the shaft between the elements in a locked position in the said retaining portion, the elements movable to a second position in which the retaining portion can be received on or removed from the first position on the shaft, the elements movable from the first position to the second position by activation of the or each spreader means.

A fastening assembly includes a connecting member, a mounting member mounted to the connecting member, and a sliding member. The mounting member includes a first fixing portion. The sliding member is slidably received in the mounting member and the connecting member. The sliding member includes a first end exposed out of the first fixing portion, and a second end slidably received in the connecting member. The second end of the sliding member is operable to be extended out of or substantially coplanar with an end of the connecting member. The fastening assembly can be utilized to mount a heat sink to a board.

There is provided a component mounting apparatus, which includes: a nozzle which sucks a component; a nozzle supporting member, on which the nozzle is installed, which moves in a vertical direction with respect to an upper surface of a substrate on which the component sucked at the nozzle is mounted; an optical system which captures an image of a leading edge portion of the nozzle where the component is sucked in a component mounting operation, from a side direction, such that an optical axis of the optical system is inclined at a predetermined angle with respect to a sucking surface of the nozzle; and an analyzer which analyzes the image of the leading edge portion to determine whether a sucking state of the component sucked by the nozzle is normal or abnormal.

An optical transceiver of one embodiment includes a transmitter optical subassembly to transmit an optical signal, a receiver optical subassembly to receive an optical signal, a mother board, a daughter board, and a housing. The mother board mounts electronic circuits that electrically communicate with the optical transmitter optical subassembly and the receiver optical subassembly. The daughter board mounts other electronic circuits that electrically communicate with the optical transmitter optical subassembly and the receiver optical subassembly. The daughter board has an extra area mounting a portion of the other electronic circuits. The housing defines a space for installing the optical transmitter optical subassembly, the receiver optical subassembly, the mother board, and the daughter board. The extra area is disposed outside the space.

A system and method for mounting a section onto a substrate, the system comprising: a fluid channel including: a fluid channel inlet that receives the section, processed from a bulk embedded sample by a sample sectioning module positioned proximal the fluid channel inlet, a section-mounting region downstream of the fluid channel inlet, and a fluid channel outlet downstream of the section-mounting region; a reservoir in fluid communication with the fluid channel outlet; and a manifold, fluidly coupled to the reservoir, that delivers fluid from the reservoir to the fluid channel inlet, thereby transmitting fluid flow that drives delivery of the section from the fluid channel inlet toward the section-mounting region.

A pharmacy automation system having a robot having a hardware device and a software for internal mapping is configured to carry out at least the following different interactions: the robot communicates autonomously with a physician or an assistant directly or via an intermediary; the robot interacts with an inventory of goods and browses the inventory of goods to determine if a prescribed medication is available in the pharmacy; if the prescribed medication is available in the pharmacy, the robot interacts with a medication dispenser, using the internal mapping to fill a container with the prescribed medication, and store the container; when a patient or a proxy arrives to pick up the prescribed medication, the robot checks and approves an identification of the patient or the proxy; and hands the container with the prescribed medication over to the patient or proxy.

Provided are a home network system and a method for an autonomous mobile robot to travel along a shortest travel route. The home network system capable of home automation includes a plurality of beacons for sensing a user located in a cell coverage area and for transmitting resulting sensing information of the user; an autonomous mobile robot for executing travel to reach the user based on provided travel route information; and a home server for calculating a travel route along which the autonomous mobile robot can easily reach the user based on the sensing information of the user transmitted from the beacons, and for providing the travel route to the autonomous mobile robot. Therefore, the autonomous mobile robot may reach the user by the shortest travel route and thus reducing energy loss.

A working apparatus has: a working equipment for doing works on a structure; an operation mechanism adapted to actively move the working equipment relative to the structure; and an adhering/traveling module coupled to the operation mechanism and adapted to adhere to the structure so as to have the weight of the working apparatus borne by the structure and travel/move on the structure for positioning. With this arrangement, the working apparatus can perform accurate positioning operations in a narrow environment and complex scanning operations by means of various pieces of the working equipment such as inspection sensors, and can secure a large working area within a short period of time and reduce the overall working hours.

Provided is a zinc-plated steel sheet for hot pressing having outstanding surface characteristics, comprising: a steel foundation plate comprising a metal surface diffusion layer of which the Gibbs free energy reduction per mole of oxygen during oxidation is less than that of Cr; an aluminum-rich layer containing at least 30 wt. % of aluminum formed on the surface diffusion layer, and a zinc plating layer formed on the aluminum-rich layer. In this way, a metal having a low affinity for oxygen is coated to an effective thickness prior to annealing and thus the creation of annealing oxides at the surface of the steel sheet is suppressed and a uniform zinc plating layer is formed, and alloying of the zinc plating layer is promoted during press-processing heat treatment. Cracking in the steel foundation plate during hot press molding is prevented.

A sensor for monitoring a plant population in front of a harvester and a transfer process of the crop from the harvester to a transport vehicle is arranged on an unmanned aircraft. The aircraft moves in the vicinity of the harvester in the harvesting mode and communicates in a wireless fashion with a control unit that controls an actuator for influencing an operating parameter of the harvester and/or the transport vehicle (in real time based on signals of the sensor in the harvesting mode.

Deboning machines and methods of operating deboning machines are provided. In one aspect, a deboning machine includes a housing, a bearing supported by the housing, a separation chamber supported by the housing and including perforations defined through the separation chamber from an interior surface to an exterior surface, an auger including a shaft and a flute formed about the shaft with the auger extending through the separation chamber and the flute adapted to be positioned a working distance from the interior surface of the separation chamber. The deboning machine also includes a retainer rotatably supported by the bearing with the auger extending through the retainer, a nut rotatably coupled to a threaded portion of the auger and rotation of the moves the flute relative to the separation chamber to establish the working distance between the flute and the interior surface of the separation chamber.

The aim of the invention is to further develop a bevel friction ring gearing. The invention thus relates to a bevel friction ring gearing in which the friction ring can be displaced by means of an adjusting device that comprises a guide on which an adjusting bridge for the friction ring is arranged in a free axially displaceable manner. The adjusting device comprises a worm-gear drive that engages with the guide.

Disclosed is a pencil-type case for allowing pressing a pressure button to discharge liquid content out to a content brush. The container for dispensing a preset quantity of liquid content accommodated in a main body by pressing a pressure button. The container includes: main body including content case to accommodate content in outer body and having pushing member; pumping member including: folding link driven by pressure button; check valve preventing content from flowing backward when content is introduced into cylinder tube via content-introducing hole formed in cylinder tube, and piston pumping content out to content brush of content brush body; and content brush body including: content-introducing tube in which check valve is installed; cam surface adjusting stroke of folding link; and content brush provided at leading end to discharge content of content-introducing tube.

A structure for mounting a clip for a writing implement which has a barrel extending along a longitudinal axis. The structure includes a fastening member made of plastic material integral with the barrel and having a proximal wall and a distal wall with respect to the barrel, the proximal and distal walls being arranged opposite each other and overall extending in substantially parallel respective planes in order to form between them a recess having an open insertion end. The clip includes a fastening portion having a substantially uniform thickness and is suitable for mounting in the recess by the open insertion end.

The invention provides storage enclosure, comprising an enclosure housing; one or more drawers slidably arranged within the enclosure housing, wherein each drawer has a pivotably mounted midplane having storage media coupled thereto wherein the storage media are coupled to both sides of the pivotably mounted midplane.

A mounting flange for attaching an HVAC air diffuser terminal in an opening in a floor or other mounting surface. The mounting flange includes a trim ring and a flange clip. The flange clip is adjustably and movably received in a slot defined a side of the trim ring. A pawl on the flange clip engages with ratchets defined in a surface of the trim ring adjacent to the slot to maintain the flange clip in selected position relative the underside of a floor. The air diffuser terminal is secured in the floor opening between gripping surfaces on the flange clip and the trim ring. An optional screw operably connects the flange clip with the trim ring so that the diffuser may be securely tightened in the floor opening.

An injection-molding method for selectively manufacturing molded parts with and without a breakthrough is disclosed. A molded part with a breakthrough is manufactured by positioning a mold core in a mold cavity, whereas a molded part without breakthrough is manufactured by removing the mold core at least partly from the mold cavity. The mold cavity delimited by a nozzle-side mold platen and an ejector-side mold platen. The mold core is movable relative to at least one of the mold platens, in particularly the nozzle-side mold platen, in an advance direction, where the mold core is closer to the nozzle-side mold platen and an opposite withdrawal direction. At least one protective measure is provided for protecting the inner surface facing the mold cavity of the respective mold platen, in particularly the nozzle-side mold platen, from adverse mechanical effects during movement of the mold core in the advance direction.

The invention relates to a method for producing a plastics material article, said method including the extruding of a tube-shaped parison and the re-forming of the parison into a hollow body within a blow mold by applying differential pressure. The method includes initially a first expanding and partial shaping of the parison with the blow mold not completely closed. Then at least one opening is provided on the circumference of the pre-expanded parison. In a further step at least one part to be built-in is introduced through the opening into the interior of the partially shaped plastics material article. In a final step the blow mold is closed completely and the blow molding of the plastics material article is completed.

Method of manufacturing a fibre-reinforced composite moulding, the method comprising the steps of: (a) disposing at least one layer of fibrous reinforcing material within a mould; (b) disposing at least one pre-preg layer adiacent to the fibrous reinforcing material, the pre-preg layer comprising fibrous reinforcement at least partially impregnated with uncured first resin material, to form a laminar assembly of the at least one layer of fibrous reinforcing material and the at least one pre-preg layer within the mould; (c) applying a vacuum to the assembly; (d) infusing a flowable uncured second resin material, under the vacuum, into the at least one layer of fibrous reinforcing material; and (e) curing the first and second resin materials at least partially simultaneously to form the fibre-reinforced composite moulding which comprises at least one first structural portion formed from the fibrous reinforcement and the cured first resin material bonded to at least one second structural portion formed from the at least one layer of fibrous reinforcing material and the cured second resin material.

An injection tool for the production of components by an injection-molding method, the injection tool including several cavities for shaping one respective product, an injection nozzle for injecting plastic materials for each cavity, and an actuating device. The injection nozzle has an injection channel which can be closed by a nozzle needle in order to control the injection process. The actuating device is arranged to move the nozzle needle in an axial direction between a first end position and a second end position, with an adjustable stop being provided which defines the first end position.

A cutting tool has a tool shank and a replaceable cutting head resiliently secured to the tool shank by an interference fit between a male fixation member of the cutting head and a female fixation member of the tool shank. The male fixation member has a resilience slit. In each cross section of the cutting tool taken perpendicular to an axis of rotation of the cutting tool through mutual abutment regions, the cross sectional profiles of the mutual abutment regions are arcuate sectors.

A surface mounting varistor for high voltages and current pulses without any risk of burning a mounting board is provided. A covering material for a varistor 1 has a duplex (two layer) structure made from a first mold layer 13 and a second mold layer 15, and a leg with a predetermined height is formed on the bottom of the covering material. As a result, a space (void) formed between a varistor element 2 and a mounting board 20 when the varistor 1 is mounted on the board 20 allows avoidance of the risk of burning the board 20, even if the varistor short-circuits.

A surface-mountable over-current protection device comprises one PTC material layer, first and second connecting conductors, first and second electrodes and an insulating layer. The PTC material layer has a resistivity less than 0.2 Ω-cm, and comprises crystalline polymer and conductive filler dispersed therein. The first and second connecting conductors are capable of effectively dissipating heat generated from the PTC material layer. The first and second electrodes are electrically connected to first and second surfaces of the PTC material layer through the first and second connecting conductors, respectively. The dissipation factor depending on the ratio of the total area of the electrodes and the conductors to the area of the PTC material layer is greater than 0.6. At 25° C., the value of the hold current of the device divided by the product of the area of the PTC material layer and the number of the PTC material layer is greater than 1A/mm2.

A surface mountable over-current protection device having upper and lower surfaces comprises a PTC device, first and second electrodes, and first and second circuits. The PTC device comprises a PTC material layer and first and second conductive layers. The PTC material layer is disposed between the conductive layers and comprises crystalline polymer and conductive filler dispersed therein. The first electrode comprises a pair of first metal foils, whereas the second electrode comprises a pair of second metal foils. The first circuit connects the first electrode and conductive layer, and has a first planar line extending horizontally. The second circuit connects the second electrode and conductive layer, and has a second planar line extending horizontally. At least one of the planar lines has a thermal resistance sufficient to mitigate heat dissipation by which the over-current protection device undergoes a test at 25° C. and 8 amperes can trip within 60 seconds.

A surface-mountable over-current protection device comprises a PTC material layer, first and second conductive layers, first and second electrodes, first and second electrically conductive connecting members. The PTC material layer has a resistivity less than 0.18 Ω-cm. The conductive layers are in contact with opposite surfaces of the PTC material layer. The first electrode comprises pair of first metal foils and is insulated from the second conductive layer. The second electrode comprises a pair of second metal foils and is insulated from the first conductive layer. The first electrically conductive connecting member connects to the first metal foils and conductive layer. The second electrically conductive connecting member connects to the second metal foils and conductive layer. The first electrically conductive connecting member comprises 40%-100% by area of the first lateral surface, and the second electrically conductive connecting member comprises 40%-100% by area of the second lateral surface.

A surface mountable over-current protection device comprises one PTC material layer, first and second conductive layers, first and second electrodes, and an insulating layer. The PTC material layer comprises crystalline polymer and conductive filler dispersed therein. The first and second conductive layers are disposed on first and second planar surfaces of the PTC material layer, respectively. The first and second electrodes are electrically connected to the first and second conductive layers. The insulating layer is disposed between the first and the second electrodes for insulation. At the melting point of the crystalline polymer, the CTE of the crystalline polymer is greater than 100 times the CTE of the first or second conductive layer, and the first and/or second conductive layers has a thickness which is large enough to obtain a resistance jump value R3/Ri less than 1.4.

A mounting apparatus includes a supporting board, a first adjusting member including a rotating board and a fixing plate, a second adjusting member to install a display device. The rotating board includes a tab, is mounted on the supporting board, and is rotatable about an axis perpendicular to the supporting board. The second adjusting member is mounted to the fixing plate and is rotatable about an axis perpendicular to the fixing plate. A first sliding block is slidably mounted to the supporting board. A second sliding block is slidably mounted to the rotating plate. The first and second sliding blocks each define a slanted groove. A pin protrudes from each of the tab and the second adjusting member to be slidably received in the slanted grooves. The first sliding block is slid to rotate the first adjusting member, the second sliding blocks is slid to rotate the second adjusting members.

A mounting apparatus for a solid state disk includes a bracket and a latching module. The bracket includes a connecting pole and a supporting member mounted to the connecting pole. The latching module is installed to the supporting member, and comprises a latching member. The supporting member includes a position pole mounted to the connecting pole and a supporting bar perpendicularly extending out from the position pole. The position pole defines a latching slot facing the supporting bar for positioning an end of the solid state disk. The supporting bar defines a guiding slot facing the latching slot for receiving a side of the solid state disk. The latching member is to latch onto the solid state disk.