The effects of mechanical disturbance from traditional ground-based logging and site preparation on volcanic ash soil and associated tree growth were investigated by using two study approaches in a retrospective study. This research was conducted on volcanic ash soils within previously harvested units in the Blue Mountains of northeast Oregon and southwest Washington. We assessed soil and tree attributes and their association with higher and lower levels of soil disturbance. The two approaches were independent efforts that yielded very different results.

Soils are fundamental to a healthy and functioning ecosystem. Therefore, forest land managers can greatly benefit from a more thorough understanding of the ecological impacts of fire and fuel management activities on the vital services soils provide. We present a summary of new research on fire effects and soils made possible through the Joint Fire Science Program and highlight management implications where applicable. Some responses were consistent across sites, whereas others were unique and may not easily be extrapolated to other sites. Selected findings include (1) postfire soil water repellency is most likely to occur in areas of high burn severity and is closely related to surface vegetation; (2) although wildfire has the potential to decrease the amount of carbon stored in soils, major changes in land use, such as conversion from forest to grasslands, present a much greater threat to carbon storage; (3) prescribed fires, which tend to burn less severely than wildfires and oftentimes have minor effects on soils, may nonetheless decrease species richness of certain types of fungi; and (4) early season prescribed burns tend to have less impact than late season burns on soil organisms, soil carbon, and other soil properties.

Rehabilitation and timber-salvage activities after wildfire require rapid planning and rational decisions. Identifying areas with high risk for erosion and soil productivity losses is important. Moreover, allocation of corrective and mitigative efforts must be rational and prioritized. Our logic-based analysis of forested soil polygons on the Okanogan-Wenatchee National Forest was designed and implemented with the Ecosystem Management Decision Support (EMDS) system to evaluate risks to soil properties and productivity associated with moderate to severe wildfire and unmitigated use of ground-based logging equipment. Soil and related data are from standard National Cooperative Soil Surveys. We present results from one national forest management unit, encompassing 6,889 soil polygons and 69 438 ha. In the example area, 36.1 percent and 46.0 percent of the area were classified as sensitive to impacts from severe wildfire and unmitigated use of logging equipment, respectively, and there was a high degree of correspondence between the map of units sensitive to wildfire and the map of units sensitive to heavy equipment. We discuss options for extending the current model and considerations for validating key model components.

Research Highlights: Consuming more than half a tablespoon of olive oil daily was associated with a 15% lower risk of having any type of cardiovascular disease and a 21% lower risk of having coronary heart disease. Replacing one teaspoon of butter, ...

The City of Cedar Rapids Thursday morning issued a drinking water boil order for portions of southwest Cedar Rapids. A rupture in a water main feeding the Bowling Street Booster Station and C Street...

Like everyone, U.S. oil companies have been hit hard by the pandemic, and they are looking for relief. . Oil companies have requested special access to a $600 billion lending facility at the Federal Reserve, and the administration seems keen to deliver. The president just announced that the Secretary of Energy and Secretary of the Treasury would make funds available, and the Department of Energy is also floating a $7 billion plan to pay drillers to leave oil in the ground.

Unfortunately, at least one faction of the industry — a group of refiners that traditionally profit when crude feedstocks are cheap — is angling for much more than a financial bailout. They are using the pandemic as cover to cannibalize markets vital to U.S. biofuel producers and farmers.

Their plan, outlined in letter from several oil-patch governors, would require the Environmental Protection Agency (EPA) to halt enforcement of the Renewable Fuel Standard (RFS). It would allow refiners to stop offering biofuel blends at the fuel pump, eliminating the market for U.S. ethanol and biodiesel and decimating demand for billions of bushels of corn and soybeans used to make renewable motor fuel.

With half the nation’s 200-plus biofuel plants already offline, thousands of rural workers facing layoffs, and millions of U.S. farmers on financial life support, the destruction of the RFS would be an economic death knell for rural America.

It’s hard to imagine why refiners would expect the Trump administration to take the request seriously. The misguided plan would inflict incredible collateral damage on our economy, our energy security, and to the President’s prospects with rural voters. Notably, the courts rejected similar abuse in 2016. Even former EPA Administrator Scott Pruitt, who scorned American farmers, rejected a similar plan back in 2017.

Nevertheless, refiners saw the current health crisis as a political opportunity and went for a kill. Fortunately, farm state champions are pushing back. Governors from Kansas, Iowa, Nebraska, South Dakota and Minnesota condemned the oil-backed plan. They wrote, “Using this global pandemic as an excuse to undercut the RFS is not just illegal; it would also sever the economic lifeline that renewable fuels provide for farmers, workers and rural communities across the Midwest.”

Aside from the sheer audacity, the refinery-backed plan also suffers from a major flaw — it wouldn’t change the economic situation of a single refinery. They claim that lifting the RFS would eliminate the costs associated with biofuel credits known as RINs, which are used to demonstrate compliance with the nation’s biofuel targets. Refiners that refuse to produce biofuel blends can purchase RINs from those that blend more ethanol or biodiesel into the fuel mix. In turn, when they sell a gallon of fuel, that RIN price is reflected in their returns. The oil industry’s own reports show that “there is no economic harm to RIN purchasers, even if RIN prices are high, because those costs are recouped in the gasoline blend stock and diesel.”

Even in a fictional scenario where costs aren’t automatically recouped, a detailed EPA analysis found that “all obligated parties, including the small refiners subject to the RFS program, would be affected at less than 1 percent of their sales (i.e., the estimated costs of compliance with the rule would be less than 1 percent of their sales) even when we did not consider their potential to recover RIN costs — with the estimated cost-to-sales percentages ranging from -0.04 percent (a cost savings) to 0.006 percent.”

Clearly, a 0.006 percent savings isn’t going to protect any refinery jobs, but refineries are betting that DC policymakers don’t know the difference between RINs values and compliance costs. They open one side of a ledger and hope that no one asks to see the next page.

Meanwhile, the nation’s biggest oil lobby, American Petroleum Institute, is calling on the EPA to simply cut 770 million gallons of biofuel out of the 2020 targets. Earlier this year, regulators approved a modest bump in biofuels to addresses a small fraction of the four billion gallons lost to secretive EPA refinery exemptions. The courts have since sided against the handouts, but the EPA has refused to implement the decision. Now, API says the agency should rip away the few gallons clawed back by U.S. farmers. It’s a baseless argument with one goal: blocking competition at the fuel pump.

Keep in mind, collapsing demand for motor fuel is just as hard on the nation’s biofuel producers. RFS targets enforced by the EPA are based on a percentage of each gallon sold — so if refiners make less fuel, their obligations under the law shrink at an equal rate. Meanwhile, biofuel producers across the heartland are closing their doors, as even their modest 10 percent share of the market has been cut in half.

Biofuel advocates are focused on their own survival. Iowa Sen. Chuck Grassley summed it up, saying “[T]here ought to be parity for all liquid fuels. So I look forward to working with (Agriculture) Secretary (Sonny) Perdue to make sure that our biofuels industry gets through this crisis so that we can continue to use America’s (home) grown energy in our gas tanks.”

Parity makes sense, but refinery lobbyists want more. The Trump EPA should reject the latest anti-biofuel pitch because it’s bad policy, but more than that, it’s an insulting attempt to capitalize on a health crisis to make an end run around the truth.

Former Missouri Sen. Jim Talent spearheaded the Renewable Fuel Standard in 2005. He currently serves as co-chair of Americans for Energy Security and Innovation.

The City of Cedar Rapids Thursday morning issued a drinking water boil order for portions of southwest Cedar Rapids.

A rupture in a water main feeding the Bowling Street Booster Station and C Street Water Tower caused a loss of pressure, which created the potential for bacteria contamination to occur, according to a news release.

The two affected areas are bounded by these streets:

• For the first area, Schaeffer Drive SW east to C Street SW and 19th Avenue SW south to Highway 30.

• For the second area, Sixth Street SW east to J Street SW and 29th Avenue south to 36th Avenue SW.

The city is advising affected residents to:

1) Bring water to a boil

2) Let it rapidly boil for at least 1 minute

3) Allow to cool completely before consuming

The boil order should be lifted or extended by 1 p.m. Sunday, after repairs are complete, pressure is restored, flushing has occurred, chlorine levels have been monitored and two consecutive sets of bacteria samples have been collected for analysis, the city stated.

Water is safe to consume in all other areas of Cedar Rapids.

Print Peppermint is one of the most refreshingly creative online printers on the internet at the moment. Their endless range of high-end business cards with unique special finishes like: foil stamping, die-cutting, embossing, letterpress, and edge painting, coupled with a meticulously curated family of thick premium papers make them a rather deadly force. Move over Moo and […]

The post Giveaway: 500 Holographic Raised Foil Business Cards – 100% Free appeared first on WebAppers.

A modeling framework for evaluating the impact of weather conditions on farming and harvest operations applies real-time, field-level weather data and forecasts of meteorological and climatological conditions together with user-provided and/or observed feedback of a present state of a harvest-related condition to agronomic models and to generate a plurality of harvest advisory outputs for precision agriculture. A harvest advisory model simulates and predicts the impacts of this weather information and user-provided and/or observed feedback in one or more physical, empirical, or artificial intelligence models of precision agriculture to analyze crops, plants, soils, and resulting agricultural commodities, and provides harvest advisory outputs to a diagnostic support tool for users to enhance farming and harvest decision-making, whether by providing pre-, post-, or in situ-harvest operations and crop analyzes.

The present invention relates to an improved process for fractionating triglyceride oil. The process according to the present invention attains a reproducible crystallization by introducing a controlled temperature profile and ensuing crystal development that reduce the amount of entrapped olein inside the crystals or crystal aggregates. The process of the present invention may be used to fractionate vegetable oils such as palm oil or its blends with other palm oil products or edible vegetable oils.

A process for producing bio-oil from municipal solid waste, the process including: a) liquifying municipal solid waste, to obtain a mixture containing an oily phase containing bio-oil, a solid phase, and a first aqueous phase; b) treating the first aqueous phase from a) with an adsorbing material, to obtain a second aqueous phase; c) fermenting the second aqueous phase from b), to obtain a biomass; d) subjecting the biomass obtained in c) to the liquification a). The bio-oil obtained is advantageously used in the production of biofuels for motor vehicles or for the generation of electric energy or heat.

Provided herein are processes for preparing estolides and estolide base oils from fatty acid reactants utilizing catalysts. Further provided herein are processes for preparing carboxylic esters from at least one carboxylic acid reactant and at least one olefin.

A method for producing a high viscosity, low volatiles blown stripped oil blend is provided. The method may include the steps of: (i) obtaining an oil blend of corn stillage oil and soybean oil having a weight ratio of corn stillage oil to soybean oil of from about 1:2 to 3:1; (ii) heating the oil blend to at least 90° C.; (iii) passing air through the heated oil blend to produce a blown oil having a viscosity of at least 50 cSt at 40° C.; and (iv) stripping the blown oil from step (iii) to reduce an acid value of the blown oil to less than 5.0 mg KOH/gram.

The invention relates to the use of a conjugated seed oil modified with an activated vinyl monomer via a Deils-Alder reaction to generate a modified reactive diluent used to enhance the physical properties of coating systems. In one embodiment, a reactive diluent containing tung oil modified by the addition of an acrylate monomer is mixed with an auto-oxidative alkyd, a metal drier package, and a wetting agent to achieve cross-linked films exhibiting improved tensile strength, tensile modulus, cross-link density, and glass transition temperature, among other physical parameters.

Methods are provided for refining natural oil feedstocks and producing dibasic esters and/or dibasic acids. The methods comprise reacting a terminal olefin with an internal olefin in the presence of a metathesis catalyst to form a dibasic ester and/or dibasic acid. In certain embodiments, the olefin esters are formed by reacting the feedstock in the presence of a metathesis catalyst under conditions sufficient to form a metathesized product comprising olefins and esters, separating the olefins from the esters in the metathesized product, and transesterifying the esters in the presence of an alcohol to form a transesterified product having olefin esters.

A method for manufacturing a refined fat or oil, including: carrying out a first steam treatment of bringing a fat or oil into contact with water vapor; and subsequently carrying out a second steam treatment of bringing the fat or oil having a temperature lower by 10° C. or more than a temperature of the fat or oil in the first steam treatment into contact with water vapor in the presence of an organic acid.

A process for the production of bio-oil from solid urban waste, comprising the following steps: a) subjecting said solid urban waste to liquefaction, obtaining a mixture including an oily phase consisting of bio-oil, a solid phase and an aqueous phase; b) subjecting the aqueous phase obtained in the liquefaction step a) to fermentation, obtaining a fermented biomass; c) feeding the fermented biomass obtained in the fermentation step b) to the liquefaction step a). The bio-oil (or bio-crude) thus obtained can be advantageously used in the production of biofuels which can be used as such or mixed with other motor vehicle fuels. Alternatively, this bio-oil (or bio-crude) can be used as such (biocombustible) or mixed with fossil combustibles (combustible oil, coal, etc.) for the generation of electric energy or heat.

Methods and related systems efficiently and effectively recover a significant amount of valuable, useable oil from byproducts formed during a dry milling process used for producing ethanol. The method may include forming a concentrate from the byproduct and recovering oil from the concentrate. The step of forming the concentrate may comprise evaporating the byproduct using a multi-stage evaporator, as well as recovering the oil before the final stage of the evaporator. Further, the step of recovering oil from the concentrate may comprise using a centrifuge and, in particular, a disk stack centrifuge. Other aspects include related methods and subsystems for recovering oil.

Methods and systems are provided that apply cavitation to a grain-based liquid medium processing stream of an oil separation process in order to achieve increased yields. Ultrasonic sources can be used in generating the cavitation. Typically, the oil processing system is a downstream process of an alcohol (such as ethanol) production facility utilizing a dry grind, a modified dry grind or a wet mill alcohol production process.

The present invention provides a method for performing regeneration of a decolorization capacity of waste clay that has been used for purification of fats and oils, and production of a thermally recyclable compound as a biofuel from oily ingredients in the waste clay at the same time in a convenient manner. That is, a method for producing purified fats and oils of the invention includes: a method for producing regenerated clay including the steps of mixing waste clay that has been used for purification of fats and oils, lower alcohol, and an acidic catalyst; and performing extraction of oily ingredients from the waste clay, and an esterification reaction between the fats and oils and/or a free fatty acid in the oily ingredients and the lower alcohol at the same time so as to regenerate a decolorization capacity of the waste clay; regenerated clay that is produced by the method for producing the regenerated clay; and a process of decolorizing the fats and oils using the regenerated clay.

The present invention relates to a composition for cosmetics including a polyglycerol fatty acid ester, which is an ester of polyglycerol having an average degree of polymerization of 4 to 100 with a fatty acid having 2 to 18 carbon atoms, has a hydroxyl value equal to or less than 15 mgKOH/g, and has a specific gravity at 20° C. of 0.96 to 1.15; a cosmetic which includes the composition for cosmetics; a method for producing an oil-in-water emulsion cosmetic which includes mixing the composition for cosmetics; and a two-separate-layer-type cosmetic, which comprises the composition for cosmetics. The present invention relates to the composition for cosmetics which can be appropriately used in producing a cosmetic giving a highly excellent feel in using and having a very good texture, a cosmetic showing a very high stability over time as an emulsion, and a two-separate-layer-type cosmetic.

The present invention relates to a composition for cosmetics including a polyglycerol fatty acid ester, which is an ester of polyglycerol having an average degree of polymerization of 4 to 100 with a fatty acid having 2 to 18 carbon atoms, has a hydroxyl value equal to or less than 15 mgKOH/g, and has a specific gravity at 20° C. of 0.96 to 1.15; a cosmetic which includes the composition for cosmetics; a method for producing an oil-in-water emulsion cosmetic which includes mixing the composition for cosmetics; and a two-separate-layer-type cosmetic, which comprises the composition for cosmetics. The present invention relates to the composition for cosmetics which can be appropriately used in producing a cosmetic giving a highly excellent feel in using and having a very good texture, a cosmetic showing a very high stability over time as an emulsion, and a two-separate-layer-type cosmetic.

Novel compounds of formula (1) wherein: A is especially a linear or branched divalent alkylene radical having between 1 and 10 carbon atoms, and Y is especially a hydrogen atom.

This invention relates to an improved process for the preparation of green fatty acid methyl esters (FAME; commonly called as biodiesel) from different triglyceride oils using mixed metal oxides derived from layered double hydroxides (referred here as LDHs) as reusable solid heterogeneous base catalysts. This process uses very low alcohohoil molar ratio and catalyst and/or products are easily separable after the reaction through simple physical processes. The properties of thus obtained biodiesel meet the standard biodiesel values and can directly be used as transport fuel.

A method for lowering content of a sterol in a highly unsaturated fatty acid-concentrated oil in a method to concentrate a highly unsaturated fatty acid by using a lipase reaction, may include removing the free form of the sterol from a raw material oil that includes a highly unsaturated fatty acid-containing glyceride prior to performing the lipase reaction; and thereafter concentrating the highly unsaturated fatty acid in the glyceride by using a lipase that is less reactive for the highly unsaturated fatty acid.

Disclosed is a process for reducing the amount of sterol in a sterol-containing microbial oil composition, including distilling, under short path distillation conditions, a sterol-containing microbial oil wherein said distillation produces a distillate fraction containing the sterol and a triacylglycerol-containing fraction having a reduced amount of the sterol when compared to the amount of sterol in the sterol-containing microbial oil composition that has not been subjected to short path distillation.

Disclosed are oil-extended olefin block copolymer compositions with precipitated silica. The precipitated silica reduces oil-bleed while maintaining composition softness.

An ion-conductive thermoplastic compositions contains a partially acetalated polyvinyl alcohol, at least one support electrolyte and at least one plasticizer. The partially acetalated polyvinyl alcohol contains two different acetal units. Electrochromic laminated glass systems produced using the ion-conductive compositions and a method for producing the systems are also provided.

Disclosed are oil-extended olefin block copolymer compositions with microcrystalline wax. The microcrystalline wax reduces oil-bleed while maintaining composition softness.

Provided is a method of producing an α-olefin polymer including a step of polymerizing one or more kinds of α-olefins each having 6 to 20 carbon atoms with a catalyst obtained by using a specific transition metal compound. By the method, an α-olefin polymer having a viscosity suitable for use in a lubricating oil can be produced on an industrial scale with ease, and further, the characteristics of the product can be widely changed through the control of reaction conditions.

A method for preparing fuel components from crude tall oil. Feedstock containing tall oil including unsaturated fatty acids is introduced to a catalytic hydrodeoxygenation to convert unsaturated fatty acids, rosin acids and sterols to fuel components. Crude tall oil is purified in a purification by washing the crude tall oil with washing liquid and separating the purified crude tall oil from the washing liquid. The purified crude tall oil is introduced directly to the catalytic hydrodeoxygenation as a purified crude tall oil feedstock. An additional feedstock may be supplied to the catalytic hydrodeoxygenation.

The present invention relates to a method for the degradation of pollutants in water and/or soil. More specific, the present invention relates to a method for the on-site decontamination or re-mediation of water and/or soil which are contaminated with organic compounds. Moreover, the invention relates to a method for forming a barrier against the spreading of a contamination with pollutants within the water and/or soil, especially within groundwater (aquifer). Further, the invention relates to means for use in these methods, and to the production of such means.

A composition and method demulsify a produced emulsion from anionic surfactants and polymer (SP) and alkali, surfactants, and polymer (ASP). The produced emulsion is demulsified into oil and water. In one embodiment, the composition includes a surfactant. The surfactant comprises a cationic surfactant, an amphoteric surfactant, or any combinations thereof.

Oil-water dispersions and emulsions derived from petroleum industry operations are demulsified and clarified using anionic polymers. Formation of such oil-water dispersion and emulsions is inhibited and mitigated using the anionic polymers. The anionic polymers comprise: A) 2-80% by weight of at least one C3-C8 α,β-ethylenically unsaturated carboxylic acid monomer; B) 15-80% by weight of at least one nonionic, copolymerizable α,β-ethylenically unsaturated monomer; C) 1-50% by weight of one or more of the following monomers: C1) at least one nonionic vinyl surfactant ester; or C2) at least one nonionic, copolymerizable α,β-ethylenically unsaturated monomer having longer polymer chains than monomer B), or C3) at least one nonionic urethane monomer; and, optionally, D) 0-5% by weight of at least one crosslinker.

Provided is an oil-in-water silicone emulsion composition that has a low silicone oligomer content, and that can form, even without the use of an organotin compound as a curing catalyst, a cured film that exhibits satisfactory strength and satisfactory adherence to a substrate, through the removal of water fraction. An oil-in-water silicone emulsion composition comprising (A) 100 mass parts of a polyorganosiloxane that contains in each molecule at least two groups selected from the group consisting of a silicon-bonded hydroxyl group, alkoxy group, and alkoxyalkoxy group, (B) 0.1 to 200 mass parts of a colloidal silica, (C) 0.1 to 100 mass parts of an aminoxy group-containing organosilicon compound that has in each molecule an average of two silicon-bonded aminoxy groups, (D) 1 to 100 mass parts of an ionic emulsifying agent, (E) 0.1 to 50 mass parts of a non-ionic emulsifying agent, and (F) 10 to 500 mass parts of water.

Methods employing detergent compositions effective for reducing soil redeposition and accumulation on hard surfaces are disclosed. The detergent compositions employ phosphinosuccinic acid adducts in combination with an alkalinity source and gluconic acid or salts thereof, copolymers of acrylic acid and maleic acids or salts thereof, sodium hypochlorite, sodium dichloroisocyanurate or combinations thereof.

A persistent-mode High Temperature Superconductor (HTS) shim coil is provided having at least one rectangular shaped thin sheet of HTS, wherein the thin sheet of HTS contains a first long portion, a second long portion parallel to first long portion, a first end, and a second end parallel to the first end. The rectangular shaped thin sheet of high-temperature superconductor has a hollow center and forms a continuous loop. In addition, the first end and the second end are folded toward each other forming two rings, and the thin sheet of high-temperature superconductor has a radial build that is less than 5 millimeters (mm) and able to withstand very strong magnetic field ranges of greater than approximately 12 Tesla (T) within a center-portion of a superconducting magnet of a superconducting magnet assembly.

An inductive fault current limiter (1), has a normally conducting primary coil assembly (2) with a multiplicity of turns (3), and a superconducting, short-circuited secondary coil assembly (4). The primary coil assembly (2) and the secondary coil assembly (4) are disposed at least substantially coaxially with respect to each other and at least partially interleaved in each other. The secondary coil assembly (4) has a first coil section (4a) disposed radially inside the turns (3) of the primary coil assembly (2) and a second coil section (4b) disposed radially outside the turns (3) of the primary coil assembly (2). The fault current limiter has an increased inductance ratio.

A composition of matter comprising an interpenetrating polymer network of a combination of a silanol-containing polysiloxane phase and a silylated triglyceride oil phase. The two phases are mixed and covalently bound to each other via siloxane crosslinks. A method for producing interpenetrating polymer networks. The method comprises providing triglycerides from oils or fats and reacting the triglycerides with a reactive silane to form a silylated triglyceride oil. The silylated triglyceride oil and a silanol terminated polysiloxane are emulsified with water in a predetermined ratio. Thereafter, crosslinking agents are added and the water is removed from the emulsions providing siloxane crosslinks between the two intimately mixed immiscible phases.

Aqueous glyphosate formulations comprising a surfactant derived from metathesized natural oil feedstocks are disclosed. The formulations comprise a glyphosate salt, water, and a surfactant derived from a metathesis-derived C10-C17 monounsaturated acid, octadecene-1,18-dioic acid, or their ester derivatives. The surfactant is selected from C10 or C12 amine oxides, C10 or C12 quats, C10, C12, or C16 amidoamines, C10 or C12 amidoamine oxides, C10 imidazoline quats, C10 or C12 amidoamine quats, C10, C12, or C16 betaines, C16 amidoamine betaines, C18 diamidoamines, C18 diamidoamine oxides, C18 diamidoamine diquats, C18 diamidoamine oxide quats, C18 diamidoamine oxide betaines, Cis diamidoamine monobetaines, C18 diamidoamine monobetaine quats, C18 ester amidoamine quats, and amidoamines and their oxidized or quaternized derivatives made from self- or cross-metathesized palm or soybean oil. The surfactants noted above impart substantial stability to highly concentrated glyphosate formulations at, above, and below room temperature and perform as well or better than commercial alternatives.

A centrifuge includes a vacuum pump machine configured of an auxiliary vacuum pump and an oil diffusion pump for exhausting gas inside a rotary chamber to outside, in which a rotor rotates at high speed. In the centrifuge, a thermistor for detecting a temperature of oil and an oil surface inside a boiler of the oil diffusion pump is provided inside the boiler, and power of a heater is adjusted with the temperature detected by the thermistor, so that a degree of vacuum inside the rotary chamber is stably reduced from atmospheric pressure to a high vacuum state. Besides, when the heater does not heat, a current is carried through the thermistor for self-heating, and it is determined from variation in a resistance value whether the oil exists or not at a position at which the thermistor 8 is placed.

A method and system for desalting a fuel having a salt therein is disclosed. A jet of superheated steam is provided at a selected pressure and fuel is drawn into the jet of superheated steam to form a mixture of the fuel and the superheated steam. The mixture is injected into a centrifuge to desalt the fuel.

A syringe piston used in fat transplantation is structured such that free oil is easily separated from suctioned fat by a syringe piston having a filter and naturally discharged through the rear side thereof. The syringe piston without a shaft, used in fat transplantation, disposed in a syringe-shaped cylindrical vessel, includes a piston body without the shaft, a packing coupled with an outer surface of the piston body to seal between the piston body and the syringe-shaped cylindrical vessel, a free oil discharging hole communicated with the front side and the rear side of the piston body, an opening and closing device for opening and closing the free oil discharging hole, and a filtering device disposed in a passage through which free oil is discharged to filter fat and pass the free oil.

A non-drip applicator that allows easy lubrication and seasoning of barbecue grilling grates or griddle cooking surfaces in an easy, fire safe, and efficient manner is described and claimed. The tool includes a body, an applicator, and, optionally, an irrigation system. The applicator may retain a supply of cooking oil therein, or cooking oil may be transferred to the applicator via the irrigation system. The application of pressure to the applicator by pressing it against the grill cooking elements causes cooking oil to be transferred from the applicator to the cooking elements. The applicator may be rotatably connected to the tool body, allowing the user to oil the grill by rolling the applicator along the grill cooking elements.

The present invention provides a process for producing a hydrocarbon oil by performing a Fischer-Tropsch synthesis reaction using a reactor for a Fischer-Tropsch synthesis including a reaction apparatus having a slurry containing catalyst particles and a gaseous phase located above the slurry to obtain a hydrocarbon oil, wherein the Fischer-Tropsch reaction is performed while controlling a temperature of the slurry so that a difference T2−T1 between the average temperature T1 of the slurry and a temperature T2 at the liquid level of the slurry in contact with the gaseous phase is 5 to 30° C.

A method and an apparatus is disclosed that uses a gas lift tubing arrangement to produce synthetic hydrocarbon related products. Using the Fischer Tropsch process as an example, the tubing is packed with a suitable catalyst and then hydrogen and carbon monoxide are injected into the top of the tubing in a fashion similar to a gas lift process. As the gases travel past the catalyst, synthetic hydrocarbons are formed and heat is rejected. The synthetic hydrocarbons and water flow out of the bottom of the tubing and travel up the annulus to the surface. In some embodiments, this process is carried out in a producing well or a in producing riser. In a producing well or a producing riser, the production from the well which flows up the annulus cools the synthetic hydrocarbon derived products. In additional and alternate embodiments, this process can be used in non-flowing wells.

A method and an apparatus is disclosed that uses a gas lift tubing arrangement to produce synthetic hydrocarbon related products. Using the Fischer Tropsch process as an example, the tubing is packed with a suitable catalyst and then hydrogen and carbon monoxide are injected into the top of the tubing in a fashion similar to a gas lift process. As the gases travel past the catalyst, synthetic hydrocarbons are formed and heat is rejected. The synthetic hydrocarbons and water flow out of the bottom of the tubing and travel up the annulus to the surface. In some embodiments, this process is carried out in a producing well or a in producing riser. In a producing well or a producing riser, the production from the well which flows up the annulus cools the synthetic hydrocarbon derived products. In additional and alternate embodiments, this process can be used in non-flowing wells.

Systems and methods for subsurface secondary and/or tertiary oil recovery optimization based on either a short term, medium term or long term optimization analysis of selected zones, wells, patterns/clusters and/or fields.

A coiling parameterization tool includes a processor and a display for displaying values of lumen volume, packing and coiling parameters for filling a lumen in relation to a desired packing. The processor is configured to detect a change in one of the displayed values and, in response to the change, to automatically evaluate, change and display remaining values displayed on the display.