Background

Advances in information communications technology (ICT) provide opportunities for enhanced diabetes care. Knowledge of the more acceptable communication modalities in patients of different ages will help to inform the direction of future innovations.

In the context of type 2 diabetes, the definition of therapeutic inertia should include the failure not only to intensify therapy, but also to deintensify treatment when appropriate and should be distinguished from appropriate inaction in cases justified by particular circumstances. Therapy should be intensified when glycemic control deteriorates to prevent long periods of hyperglycemia, which increase the risk of complications. Strategic plans to overcome therapeutic inertia must include actions focused on patients, prescribers, health systems, and payers. Therapeutic inertia affects the management of glycemia, hypertension, and lipid disorders, all of which increase the risk for cardiovascular diseases. Thus, multifactorial interventions that act on additional therapeutic goals beyond glycemia are needed.

Therapeutic inertia is a prevalent problem in people with type 2 diabetes in primary care and affects clinical outcomes. It arises from a complex interplay of patient-, clinician-, and health system–related factors. Ultimately, clinical practice guidelines have not made an impact on improving glycemic targets over the past decade. A more proactive approach, including focusing on optimal combination agents for early glycemic durability, may reduce therapeutic inertia and improve clinical outcomes.

Factors contributing to therapeutic inertia related to patients’ medication experiences include concerns about side effects and out-of-pocket costs, stigmatization for having diabetes, confusion about frequent changes in evidence-based guidelines, low health literacy, and social determinants of health. A variety of solutions to this multifactorial problem may be necessary, including integrating pharmacists into interprofessional care teams, using medication refill synchronization programs, maximizing time with patients to discuss fears and concerns, being cognizant of language used to discuss diabetes-related topics, and avoiding stigmatizing patients. Managing diabetes successfully is a team effort, and the full commitment of all team members (including patients) is required to achieve desired outcomes through an individualized approach.

Diabetes educators can be challenged by therapeutic inertia, as has been documented with other health care providers. There are many contributing factors related to the educators themselves, their patients, and the health care system in which they operate. To address this potentially significant barrier to quality patient care, diabetes educators can adopt numerous strategies to maximize their impact and address the factors contributing to therapeutic inertia in their practices.

Many people with diabetes do not achieve individualized treatment targets. Therapeutic inertia, the underuse of effective therapies in preventing serious clinical end points, is a frequent, important contributor to this failure. Clinicians, patients, health systems, payors, and producers of medications, devices, and other products for those with diabetes all play a role in the development of therapeutic inertia and can all help to reduce it.

Background and objectives

The effects of active case finding (ACF) models that mobilise community networks for early identification and treatment of tuberculosis (TB) remain unknown. We investigated and compared the effect of community-based ACF using a seed-and-recruit model with one-off roving ACF and passive case finding (PCF) on the time to treatment initiation and identification of bacteriologically confirmed TB.

Recent advances in cough research suggest a more widespread use of cough-provocation tests to demonstrate the hypersensitivity of the cough reflex arc. Cough-provocation tests with capsaicin or acidic aerosols have been used for decades in scientific studies. Several factors have hindered their use in everyday clinical work: i.e. lack of standardisation, the need for special equipment and the limited clinical importance of the response. Cough-provocation tests with hypertonic aerosols (CPTHAs) involve provocations with hypertonic saline, hypertonic histamine, mannitol and hyperpnoea. They probably act via different mechanisms than capsaicin and acidic aerosols. They are safe and well tolerated and the response is repeatable. CPTHAs can assess not only the sensitivity of the cough reflex arc but also the tendency of the airway smooth muscles to constrict (airway hyper-responsiveness). They can differentiate between subjects with asthma or chronic cough and healthy subjects. The responsiveness to CPTHAs correlates with the cough-related quality of life among asthmatic subjects. Furthermore, the responsiveness to them decreases during treatment of chronic cough. A severe response to CPTHAs may indicate poor long-term prognosis in chronic cough. The mannitol test has been stringently standardised, is easy to administer with simple equipment, and has regulatory approval for the assessment of airway hyper-responsiveness. Manual counting of coughs during a mannitol challenge would allow the measurement of the function of the cough reflex arc as a part of clinical routine.

Management of cystic fibrosis has been revolutionised by the introduction of cystic fibrosis transmembrane conductance regulator (CFTR) modulators. These compounds treat the underlying molecular basis of the disease by increasing activity of defective CFTR channels, which improves many clinical parameters and enhances patient quality of life [1]. Next-generation modulators, also known as triple combination therapy, promise to be highly efficacious in up to 90% of patients [2] and will likely dramatically change the landscape of cystic fibrosis disease. Studies examining individuals before and after initiation of CFTR modulators have revealed novel functions of CFTR and shown that CFTR modulators do not reverse all disease manifestations [3–5]. Thus, knowledge of the post-modulator cystic fibrosis disease state is crucial for understanding what continued therapies will be needed for people with cystic fibrosis and what new challenges may arise.

Inhaled corticosteroid/long-acting β₂-agonist combination therapy is a recommended treatment option for patients with chronic obstructive pulmonary disease (COPD) and increased exacerbation risk, particularly those with elevated blood eosinophil levels. SOPHOS (NCT02727660) evaluated the efficacy and safety of two doses of budesonide/formoterol fumarate dihydrate metered dose inhaler (BFF MDI) versus formoterol fumarate dihydrate (FF) MDI, each delivered using co-suspension delivery technology, in patients with moderate-to-very severe COPD and a history of exacerbations.

In this phase 3, randomised, double-blind, parallel-group, 12–52-week, variable length study, patients received twice-daily BFF MDI 320/10 µg or 160/10 µg, or FF MDI 10 µg. The primary endpoint was change from baseline in morning pre-dose trough forced expiratory volume in 1 s (FEV₁) at week 12. Secondary and other endpoints included assessments of moderate/severe COPD exacerbations and safety.

The primary analysis (modified intent-to-treat) population included 1843 patients (BFF MDI 320/10 µg, n=619; BFF MDI 160/10 µg, n=617; and FF MDI, n=607). BFF MDI 320/10 µg and 160/10 µg improved morning pre-dose trough FEV₁ at week 12 versus FF MDI (least squares mean differences 34 mL [p=0.0081] and 32 mL [p=0.0134], respectively), increased time to first exacerbation (hazard ratios 0.827 [p=0.0441] and 0.803 [p=0.0198], respectively) and reduced exacerbation rate (rate ratios 0.67 [p=0.0001] and 0.71 [p=0.0010], respectively). Lung function and exacerbation benefits were driven by patients with blood eosinophil counts ≥150 cells·mm^–3. The incidence of adverse events was similar, and pneumonia rates were low (≤2.4%) across treatments.

SOPHOS demonstrated the efficacy and tolerability of BFF MDI 320/10 µg and 160/10 µg in patients with moderate-to-very severe COPD at increased risk of exacerbations.

Background

COPD patients account for a large proportion of lung transplants; lung transplantation survival benefit for COPD patients is not well established.

Introduction

Immunotherapy has become the standard of care in advanced non-small cell lung cancer (NSCLC). We aimed to quantify the economic impact, in France, of anti-PD-1 therapy for NSCLC.

Background

We aimed to investigate the epidemiological and clinical features, and medical care-seeking process of patients with the 2019 coronavirus disease (COVID-19) in Wuhan, China, to provide useful information to contain COVID-19 in other places with similar outbreaks of the virus.

ABSTRACT

Interspecific hybridization can drive evolutionary adaptation to novel environments. The Saccharomycotina clade of budding yeasts includes many hybrid lineages, and hybridization has been proposed as a source for new pathogenic species. Candida orthopsilosis is an emerging opportunistic pathogen for which most clinical isolates are hybrids, each derived from one of at least four independent crosses between the same two parental lineages. To gain insight into the transcriptomic aftermath of hybridization in these pathogens, we analyzed allele-specific gene expression in two independently formed hybrid strains and in a homozygous strain representative of one parental lineage. Our results show that the effect of hybridization on overall gene expression is rather limited, affecting ~4% of the genes studied. However, we identified a larger effect in terms of imbalanced allelic expression, affecting ~9.5% of the heterozygous genes in the hybrids. This effect was larger in the hybrid with more extensive loss of heterozygosity, which may indicate a tendency to avoid loss of heterozygosity in these genes. Consistently, the number of shared genes with allele-specific expression in the two independently formed hybrids was higher than random expectation, suggesting selective retention. Some of the imbalanced genes have functions related to pathogenicity, including zinc transport and superoxide dismutase activities. While it remains unclear whether the observed imbalanced genes play a role in virulence, our results suggest that differences in allele-specific expression may add an additional layer of phenotypic plasticity to traits related to virulence in C. orthopsilosis hybrids.

IMPORTANCE How new pathogens emerge is an important question that remains largely unanswered. Some emerging yeast pathogens are hybrids originated through the crossing of two different species, but how hybridization contributes to higher virulence is unclear. Here, we show that hybrids selectively retain gene regulation plasticity inherited from the two parents and that this plasticity affects genes involved in virulence.

ABSTRACT

The clostridial neurotoxins (CNTs) comprise tetanus toxin (TT) and botulinum neurotoxin (BoNT [BT]) serotypes (A to G and X) and several recently identified CNT-like proteins, including BT/En and the mosquito BoNT-like toxin Pmp1. CNTs are produced as single proteins cleaved to a light chain (LC) and a heavy chain (HC) connected by an interchain disulfide bond. LC is a zinc metalloprotease (cleaving soluble N-ethylmaleimide-sensitive factor attachment protein receptors [SNAREs]), while HC contains an N-terminal translocation domain (HCN) and a C-terminal receptor binding domain (HCC). HCN-mediated LC translocation is the least understood function of CNT action. Here, β-lactamase (βlac) was used as a reporter in discovery-based live-cell assays to characterize TT-mediated LC translocation. Directed mutagenesis identified a role for a charged loop (⁷⁶⁷DKE⁷⁶⁹) connecting α15 and α16 (cis-loop) within HCN in LC translocation; aliphatic substitution inhibited LC translocation but not other toxin functions such as cell binding, intracellular trafficking, or HCN-mediated pore formation. K⁷⁶⁸ was conserved among the CNTs. In molecular simulations of the HCN with a membrane, the cis-loop did not bind with the cell membrane. Taken together, the results of these studies implicate the cis-loop in LC translocation, independently of pore formation.

IMPORTANCE How protein toxins translocate their catalytic domain across a cell membrane is the least understood step in toxin action. This study utilized a reporter, β-lactamase, that was genetically fused to full-length, nontoxic tetanus toxin (βlac-TT) in discovery-based live-cell assays to study LC translocation. Directed mutagenesis identified a role for K⁷⁶⁸ in LC translocation. K⁷⁶⁸ was located between α15 and α16 (termed the cis-loop). Cellular assays showed that K⁷⁶⁸ did not interfere with other toxin functions, including cell binding, intracellular trafficking, and pore formation. The equivalent K⁷⁶⁸ is conserved among the clostridial neurotoxin family of proteins as a conserved structural motif. The cis-loop appears to contribute to LC translocation.

ABSTRACT

The prevailing paradigm in obstetrics has been the sterile womb hypothesis. However, some are asserting that the placenta, intra-amniotic environment, and fetus harbor microbial communities. The objective of this study was to determine whether the fetal and placental tissues of rhesus macaques harbor bacterial communities. Fetal, placental, and uterine wall samples were obtained from cesarean deliveries without labor (~130/166 days gestation). The presence of bacteria in the fetal intestine and placenta was investigated through culture. The bacterial burden and profiles of the placenta, umbilical cord, and fetal brain, heart, liver, and colon were determined through quantitative real-time PCR and DNA sequencing. These data were compared with those of the uterine wall as well as to negative and positive technical controls. Bacterial cultures of fetal and placental tissues yielded only a single colony of Cutibacterium acnes. This bacterium was detected at a low relative abundance (0.02%) in the 16S rRNA gene profile of the villous tree sample from which it was cultured, yet it was also identified in 12/29 background technical controls. The bacterial burden and profiles of fetal and placental tissues did not exceed or differ from those of background technical controls. By contrast, the bacterial burden and profiles of positive controls exceeded and differed from those of background controls. Among the macaque samples, distinct microbial signals were limited to the uterine wall. Therefore, using multiple modes of microbiologic inquiry, there was not consistent evidence of bacterial communities in the fetal and placental tissues of rhesus macaques.

IMPORTANCE Microbial invasion of the amniotic cavity (i.e., intra-amniotic infection) has been causally linked to pregnancy complications, especially preterm birth. Therefore, if the placenta and the fetus are typically populated by low-biomass microbial communities, current understanding of the role of microbes in reproduction and pregnancy outcomes will need to be fundamentally reconsidered. Could these communities be of benefit by competitively excluding potential pathogens or priming the fetal immune system for the microbial bombardment it will experience upon delivery? If so, what properties (e.g., microbial load and community membership) of these microbial communities preclude versus promote intra-amniotic infection? Given the ramifications of the in utero colonization hypothesis, critical evaluation is required. In this study, using multiple modes of microbiologic inquiry (i.e., culture, quantitative real-time PCR [qPCR], and DNA sequencing) and controlling for potential background DNA contamination, we did not find consistent evidence for microbial communities in the placental and fetal tissues of rhesus macaques.

Molar element ratio analysis of element concentrations consists of four basic tools that provide substantial insight into the lithogeochemistry (and mineralogy) of rocks under examination. These tools consist of: (1) conserved element ratio analysis; (2) Pearce element ratio analysis; (3) general element ratio analysis; and (4) lithogeochemical mineral mode analysis. Conserved element ratio analysis is useful in creating a chemostratigraphic model for the host rocks to mineral deposits, whereas Pearce element ratio analysis and general element ratio analysis are primarily used to identify mineralogical and metasomatic controls on rock compositions and to investigate and quantify the extent of the material transfers that formed the host rocks and mineralization. Lithogeochemical mineral mode analysis converts element concentrations into mineral concentrations using a matrix-based change-of-basis operation, allowing lithogeochemical data to be interpreted in terms of mineral modes. It can be used to provide proper names to rocks, an important activity for an exploration geologist because of the implications that rock names have on genetic processes and mineral deposit models.

This paper provides a review of the theoretical foundations of each of these four tools and then illustrates how these techniques have been used in a variety of exploration applications to assist in the search for, evaluation and planning of, and the mining of mineral deposits. Examples include the evaluation of total digestion lithogeochemical datasets from mineral deposits hosted by igneous and sedimentary rocks and formed by hydrothermal and igneous processes. In addition, this paper illustrates a more recent geometallurgical application of these methods, whereby the mineral proportions determined by lithogeochemical mineral mode analysis are used to predict rock properties and obtain the ore body knowledge critical for resource evaluation, mine planning, mining and mine remediation.

Thematic collection: This article is part of the Exploration 17 collection available at: https://www.lyellcollection.org/cc/exploration-17

Multi-element geochemical surveys of rocks, soils, stream/lake/floodplain sediments and regolith are typically carried out at continental, regional and local scales. The chemistry of these materials is defined by their primary mineral assemblages and their subsequent modification by comminution and weathering. Modern geochemical datasets represent a multi-dimensional geochemical space that can be studied using multivariate statistical methods from which patterns reflecting geochemical/geological processes are described (process discovery). These patterns form the basis from which probabilistic predictive maps are created (process validation). Processing geochemical survey data requires a systematic approach to effectively interpret the multi-dimensional data in a meaningful way. Problems that are typically associated with geochemical data include closure, missing values, censoring, merging, levelling different datasets and adequate spatial sample design. Recent developments in advanced multivariate analytics, geospatial analysis and mapping provide an effective framework to analyse and interpret geochemical datasets. Geochemical and geological processes can often be recognized through the use of data discovery procedures such as the application of principal component analysis. Classification and predictive procedures can be used to confirm lithological variability, alteration and mineralization. Geochemical survey data of lake/till sediments from Canada and of floodplain sediments from Australia show that predictive maps of bedrock and regolith processes can be generated. Upscaling a multivariate statistics-based prospectivity analysis for arc-related Cu–Au mineralization from a regional survey in the southern Thomson Orogen in Australia to the continental scale, reveals a number of regions with a similar (or stronger) multivariate response and hence potentially similar (or higher) mineral potential throughout Australia.

Thematic collection: This article is part of the Exploration 17 collection available at: https://www.lyellcollection.org/cc/exploration-17

This paper focuses on handheld and top-of-hole techniques which have appeared since 2007 or have undergone major improvements, and discusses their benefits, challenges and pitfalls, why we use them and what to expect from them. There is an ongoing need to be innovative with the way we undertake mineral exploration. Recent technological advances that have been applied to successful mineral exploration include on-site or portable instruments, on-site laboratory technologies, various core scanners, and technologies for fluid analysis. Portable or field technologies such as pXRF, pXRD, pNIR-SWIR, µRaman and LIBS aid in obtaining chemical and mineralogical information. Spectral gamma tools, a well-known technology, recently took advantage of improved ground and airborne (drone) instruments, to complement hyperspectral imagery. At mine and exploration sites, top-of-hole sensing technologies, such as Lab-at-Rig® and various core scanners (both spectral- and XRF-based) have become useful tools to analyse metres of core as it is being drilled. Fluid analyses are not as common as analyses of solid materials, but there are advances in such technologies as anodic stripping voltammetry, polarography and ion-exchange electrodes aiming for analysis of commodity or environmentally important elements.

Field-portable geochemical techniques and on-site technologies now offer instant response and flexibility for most exploration tasks. By providing relevant data within minutes, they allow safer field decisions and focus on the most promising finds, while saving valuable resources in sampling grids or drilling. More efficient laboratory analysis programs are supported by sample screening and homogeneity checking on-site. Field analyses are not always as accurate as laboratory ones, but most of the time can be correlated with them, enabling reliable decisions. The level of confidence in field-made decisions needs to be compared between later and less numerous laboratory analyses, and less precise but more abundant and immediate field analyses. It may be demonstrated that, in many cases, the fit–for-purpose nature of the latter allows a better confidence level. Quality compromises associated with field analyses can be reduced by the application of better sample preparation and quality assurance/quality control (QA/QC) procedures. Most of the further development of on-site chemical analysis is expected to be based on its integration with lab methods and on sound QA/QC practice, allowing a precise evaluation of its confidence level and uncertainties. Mineralogical analyses are constrained by our ability to interpret the data in near-real time but offer promising approaches in both surface and drilling exploration campaigns.

Thematic collection: This article is part of the Exploration 17 collection available at: https://www.lyellcollection.org/cc/exploration-17

Among the emerging techniques to detect the real footprint of buried ore deposits is isotope tracing. Novel and automated preparation systems such as continuous flow isotope ratio mass spectrometry, off-axis integrated cavity output spectroscopy for isotopic compositions of selected molecules, multi-collector inductively coupled-plasma mass spectrometry (ICP-MS), triple quadrupole ICP-MS, laser ablation ICP-MS, and a multitude of inline preparation systems have facilitated the use of isotopes as tracers in mineral exploration, as costs for isotope analyses have decreased and the time required for the analyses has improved. In addition, the isotope systems being used have expanded beyond the traditional light stable and Pb isotopes to include a multitude of elements that behave differently during processes that promote the mobilization of elements during both primary and secondary dispersion. Isotopes are also being used to understand barren areas that lack a critical process to form an ore deposit and to reveal precise redox mechanisms. The goal is to be able to use isotopes to reflect a definitive process that occurs in association with the deposit and not in barren systems, and then to relate these to something that is easier to measure, namely elemental concentrations. As new generations of exploration and environmental scientists are becoming more comfortable with the application of isotopes to effectively trace processes involved in geoscience, and new technologies for rapid and inexpensive analyses of isotopes are continually being developed, novel applications of isotope tracing are becoming more mainstream.

Thematic collection: This article is part of the Exploration 17 collection available at: https://www.lyellcollection.org/cc/exploration-17

There is a pressing need for new exploration tools to target and vector towards mineralization in covered terrains. Groundwater provides a valuable and under-utilized geochemical sampling medium, and represents an important and cost-effective tool to expose covered terrains to systematic exploration. For Au exploration, researchers agree the best hydrogeochemistry pathfinder is dissolved Au itself, with additional potential from other pathfinders (albeit non-unique) such as As, Ag, W and Mo. Despite Au's relatively low solubility, with rigorous field protocols and appropriate analytical methods, explorers can respond to dissolved Au directly with robust parts per trillion (ppt)-level analyses.

Even with ppt-level analyses, a practical implication of Au's low solubility is that a deposit's dissolved Au signature is generally weaker than seen in other more mobile pathfinders, producing a smaller detectable footprint, which must be considered when designing exploration programmes. Using purpose-drilled groundwater sampling bores, explorers can collect groundwater samples at the density required to respond to dissolved Au where existing borehole coverage is otherwise insufficient. In addition to its use at the regional scale, with even tighter sample density, hydrogeochemistry also shows promise at the project scale, allowing the 3D modelling of pathfinder dispersion.

For hydrogeochemistry to be widely adopted for Au exploration, explorers need confidence in ppt-level dissolved Au analyses, and the context to understand their significance. This paper aims to address these topics and provide a straightforward starting point for Au explorers interested in applying hydrogeochemistry by: (i) summarizing examples of regional sampling programmes and more focused case studies to illustrate how covered Au deposits create measurable dissolved Au footprints distinguishable from background; and (ii) sharing examples of dissolved Au analyses that are being integrated into exploration at the regional and project scales.

As seen in the results, the distributions of dissolved Au in the regional- and project-scale programmes show remarkably similar and easy to interpret high-contrast, low-frequency anomalies against relatively low backgrounds. These are desirable attributes of any geochemical pathfinder. When combined with the benefits of hydrogeochemistry v. other geochemical exploration tools (e.g. groundwater can create larger footprints requiring fewer samples to detect, and groundwater can recharge from depth to reflect deeper mineralization), dissolved Au is a powerful pathfinder ideally suited for Au exploration in covered terrains.

While this paper focuses on the use of dissolved Au, additional pathfinders can provide valuable information, including indications of lithological changes, hydrothermal alteration and different styles of mineralization, as well as opportunities to use secondary pathfinders when sample density or local conditions may not result in detectable dissolved Au signatures.

Thematic collection: This article is part of the Exploration 17 collection available at: https://www.lyellcollection.org/cc/exploration-17

In the past decade, significant research efforts have been devoted to mineral chemistry studies to assist porphyry exploration. These activities can be divided into two major fields of research: (1) porphyry indicator minerals (PIMs), which are used to identify the presence of, or potential for, porphyry-style mineralization based on the chemistry of magmatic minerals such as zircon, plagioclase and apatite, or resistate hydrothermal minerals such as magnetite; and (2) porphyry vectoring and fertility tools (PVFTs), which use the chemical compositions of hydrothermal minerals such as epidote, chlorite and alunite to predict the likely direction and distance to mineralized centres, and the potential metal endowment of a mineral district. This new generation of exploration tools has been enabled by advances in and increased access to laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS), short-wave length infrared (SWIR), visible near-infrared (VNIR) and hyperspectral technologies. PIMs and PVFTs show considerable promise for exploration and are starting to be applied to the diversity of environments that host porphyry and epithermal deposits globally. Industry has consistently supported development of these tools, and in the case of PVFTs encouraged by several successful blind tests where deposit centres have successfully been predicted from distal propylitic settings. Industry adoption is steadily increasing but is restrained by a lack of the necessary analytical equipment and expertise in commercial laboratories, and also by the ongoing reliance on well-established geochemical exploration techniques (e.g. sediment, soil and rock chip sampling) that have aided the discovery of near-surface resources over many decades, but are now proving less effective in the search for deeply buried mineral resources and for those concealed under cover.

Thematic collection: This article is part of the Exploration 17 collection available at: https://www.lyellcollection.org/cc/exploration-17

There have been several advances in inductively coupled plasma-mass spectrometer (ICP-MS) analytical technologies in the last decade. Collision/reaction cell ICP-MS and triple quadrupole ICP-MS techniques can produce lower detection limits for select elements that experience interferences with a standard quadrupole (e.g. Se and As). Triple quadrupole ICP-MS, in particular, can eliminate virtually all polyatomic or isobaric interferences for highly accurate measurements of some element isotopes systematics that are of great interest in mineral exploration, namely Pb/Pb. Laser ablation ICP-MS has become more popular as an effective analytical tool to measure mineral grain trace elements, which could assist in vectoring to mineralization or exploration drill targets. The ablation of a spot on a Li-borate fused glass disk paired with XRF analysis has also gained popularity as an alternative to total whole rock characterization packages that employ several separate digestions and analytical methods. While there have been several advancements in ICP-MS technologies in exploration geochemistry, they have not been widely accepted or implemented. This slow adaptation could be due to the extended recession in the mining industry between 2012 and 2017. It is also possible that standard ICP-MS data (i.e. no collision/reaction cell) is still fit for purpose. This stands in stark contrast to implementation of ICP-MS in the previous decade (1997–2007), which was transformational for the industry.

Consideration of all elements from large multi-element ICP-MS analytical suites for mineral exploration can be an extremely powerful tool in the exploration toolkit. The discovery of the White Gold District, Yukon, is a prime example of how the utilization of soil geochemical data, when plotted spatially, can vector to gold mineralization. The presence of Au + As + Sb soil anomalies were key to delineating mineralization, especially when accompanied by publicly available geological, geographical and geophysical data. Additionally, elements and element ratios not typically considered in Au exploration, including Ni and U, were utilized to determine the lithological and structural controls on mineralization. The availability of multi-element ICP-MS data was also useful in the discovery of the Cascadero Copper Taron Caesium deposit. Ore-grade Cs was discovered only because Cs was included in the multi-element ICP-MS exploration geochemistry suite. Before the availability of ICP-MS, it is unlikely that this deposit would have been discovered.

Thematic collection: This article is part of the Exploration 17 collection available at: https://www.lyellcollection.org/cc/exploration-17

It is important to identify, assess, and address current barriers to implementation of post-approval changes that are intended to ensure continued (uninterrupted) operations and drive innovation and continual improvement in a maximally efficient, agile, and flexible pharmaceutical manufacturing sector. Leveraging the International Conference for Harmonisation Quality Guideline Q10 provides regulatory relief when it comes to addressing changes related to excipients, specifically excipient supplier's name and address changes, which will ensure a sustainable, reliable global supply and the availability of high quality product to patients through the entire commercial lifecycle of a product without extensive regulatory oversight.

Extractables and leachables (E&L) are identified and quantified so that their impact on patient safety can be established and assessed. The uncertainty in the impact assessment is affected by the uncertainty in the substance's experimentally determined identity and concentration. Thus, these experimentally determined quantities must be reported not only in terms of their absolute result but also in terms of the uncertainty in the result, which is based on the amount and rigor of the information on which the result is based. In this way, the impact assessment can be tempered to account for the uncertainty in its input data. To facilitate the assignment and reporting of uncertainty, classification hierarchies are proposed and discussed for both identification and quantitation. Both hierarchies establish levels or degrees of identification and quantitation based on the uncertainty of the result and contain descriptions of the quality and quantity of information required to achieve a certain level within the hierarchy. The minimal levels that must be achieved to support impact assessment are also established.

For manufacturers of both sterile and nonsterile pharmaceuticals, there is an expectation that the manufacturing process is performed in a manner that prevents extraneous contamination so that the products are provided in a safe, integral, pure, and unadulterated form. As part of that process, cleaning and disinfection are an absolute necessity. Although cleaning and disinfection support control of microbial contamination through preventive and corrective action, specific compendia methods do not currently exist. The intent of this paper is to provide a general guidance on how to perform disinfectant efficacy validation and implementation. This includes how to make sure the concepts are understood, how to interpret facility data and utilize it to demonstrate control awareness for your facilities, and how to leverage the data to reduce redundancies in validation or verification. This paper represents the thoughts and best practices of the authoring team and their respective companies and provides an efficient way to qualify disinfectants without impacting the quality of the study. If you choose to follow the recommendations in this paper, you must ensure that the appropriate rationale is sound and the scientific data is documented. It is the belief of the authoring team that only then will this approach meet regulatory requirements.

This technology review, written by a small group of pharmaceutical microbiologists experienced in cell therapies, discussed a risk-based approach to microbiological contamination detection and control during gene and cell therapy production. Topics discussed include a brief overview of cell therapies, a risk analysis related to donor selection, cell collection and infectious agent testing, cell transformation and expansion, packaging, storage, and administration, and cell therapy microbial contamination testing and release.

Glass is the favorite material for parenteral packaging because of its physico-chemical properties. Type I borosilicate glass is worldwide use at this scope, but it may have some issues related to breakage, corrosion and delamination that might compromise the drug quality, safety and efficacy. These issues can be mitigated and avoided starting from the appropriate selection of the most suitable raw material at the early stage of the glass container design. In this study, Type I borosilicate glass vials manufactured using two glass tubes having different chemical compositions, were studied and compared in terms of their resistance to corrosion. Testing design was applied with the aim to select the best practice approach comparing different storage simulation conditions: ageing treatment through autoclaving and stability testing (real-time and accelerated). Clear differences were found between the different glass types in terms of hydrolytic and corrosion resistance that highlighted the relation between chemical composition and glass chemical durability. Non-negligible differences were also observed using different storage conditions.

A vial-capping process for lyophilization stopper configurations was previously quantified using residual seal force (RSF). A correlation between RSF and container closure integrity (CCI) was established, and component positional offsets were identified to be the primary source of variability in RSF measurements.

To gain insight into the effects of stopper geometry on CCI, serum stoppers with the same rubber formulation were investigated in this study. Unlike lyophilization stoppers that passed CCI (per helium leak testing) even with RSF of 0 N owing to their excellent valve seal, serum stoppers consistently failed CCI when RSF was <15.8 N. When the plug was removed, both types of stoppers exhibited a comparable critical lower RSF limit (19–20 N), below which CCI could not be maintained. When CCI was retested at later time points (up to 6 mo), some previously failed vials passed CCI, suggesting that CCI improvement might be related to rubber relaxation (viscous flow), which can fill minor imperfections on the vial finish.

To confirm component positional offsets are the primary sources of RSF variability, a novel quantification tool—micro-computed tomography (micro-CT)—was used in this study. Micro-CT provided images for quantification of positional offsets of the cap and stopper that directly correlated with RSF fluctuations. Serum stoppers and lyophilization stoppers are comparable in RSF variations, although lyophilization stoppers are more robust in CCI. The use of micro-CT provides a nondestructive and innovative tool in quantitatively analyzing component features of capped vials that would otherwise be difficult to investigate.

Technologies allowing genetic sequencing of the human microbiome are opening new realms to discovery. The host microbiota substantially impacts immune responses both in immune-mediated inflammatory diseases (IMIDs) and in tumors affecting tissues beyond skin and mucosae. However, a mechanistic link between host microbiota and cancer or IMIDs has not been well established. Here, we propose T helper 17 (T_H17) lymphocytes as the connecting factor between host microbiota and rheumatoid or psoriatic arthritides, multiple sclerosis, breast or ovarian cancer, and multiple myeloma. We theorize that similar mechanisms favor the expansion of gut-borne T_H17 cells and their deployment at the site of inflammation in extraborder IMIDs and tumors, where T_H17 cells are driving forces. Thus, from a pathogenic standpoint, tumors may share mechanistic routes with IMIDs. A review of similarities and divergences in microbiota-T_H17 cell interactions in IMIDs and cancer sheds light on previously ignored pathways in either one of the two groups of pathologies and identifies novel therapeutic avenues.

Although enteroviruses are associated with a wide variety of diseases and conditions, their mode of replication is well conserved. Their genome is carried as a single, positive-sense RNA strand. At the 5' end of the strand is an approximately 90-nucleotide self-complementary region called the 5' cloverleaf, or the oriL. This noncoding region serves as a platform upon which host and virus proteins, including the 3B, 3C, and 3D virus proteins, assemble in order to initiate replication of a negative-sense RNA strand. The negative strand in turn serves as a template for synthesis of multiple positive-sense RNA strands. Building on structural studies of individual RNA stem-loops, the structure of the intact 5' cloverleaf from rhinovirus has recently been determined via nuclear magnetic resonance/small-angle X-ray scattering (NMR/SAXS)-based methods, while structures have also been determined for enterovirus 3A, 3B, 3C, and 3D proteins. Analysis of these structures, together with structural and modeling studies of interactions between host and virus proteins and RNA, has begun to provide insight into the enterovirus replication mechanism and the potential to inhibit replication by blocking these interactions.

The capacity of Listeria monocytogenes to adapt to environmental changes is facilitated by a large number of regulatory proteins encoded by its genome. Among these proteins are the uncharacterized LysR-type transcriptional regulators (LTTRs). LTTRs can work as positive and/or negative transcription regulators at both local and global genetic levels. Previously, our group determined by comparative genome analysis that one member of the LTTRs (NCBI accession no. WP_003734782) was present in pathogenic strains but absent from nonpathogenic strains. The goal of the present study was to assess the importance of this transcription factor in the virulence of L. monocytogenes strain F2365 and to identify its regulons. An L. monocytogenes strain lacking lysR (the F2365lysR strain) displayed significant reductions in cell invasion of and adhesion to Caco-2 cells. In plaque assays, the deletion of lysR resulted in a 42.86% decrease in plaque number and a 13.48% decrease in average plaque size. Furthermore, the deletion of lysR also attenuated the virulence of L. monocytogenes in mice following oral and intraperitoneal inoculation. The analysis of transcriptomics revealed that the transcript levels of 139 genes were upregulated, while 113 genes were downregulated in the F2365lysR strain compared to levels in the wild-type bacteria. lysR-repressed genes included ABC transporters, important for starch and sucrose metabolism as well as glycerolipid metabolism, flagellar assembly, quorum sensing, and glycolysis/gluconeogenesis. Conversely, lysR activated the expression of genes related to fructose and mannose metabolism, cationic antimicrobial peptide (CAMP) resistance, and beta-lactam resistance. These data suggested that lysR contributed to L. monocytogenes virulence by broad impact on multiple pathways of gene expression.

IMPORTANCE Listeria monocytogenes is the causative agent of listeriosis, an infectious and fatal disease of animals and humans. In this study, we have shown that lysR contributes to Listeria pathogenesis and replication in cell lines. We also highlight the importance of lysR in regulating the transcription of genes involved in different pathways that might be essential for the growth and persistence of L. monocytogenes in the host or under nutrient limitation. Better understanding L. monocytogenes pathogenesis and the role of various virulence factors is necessary for further development of prevention and control strategies.

Background

People with pulmonary fibrosis often experience a protracted time to diagnosis, high symptom burden and limited disease information. This review aimed to identify the supportive care needs reported by people with pulmonary fibrosis and their caregivers.

An aberrant bi-apical Follicucullus specimen (Albaillellaria, Radiolaria) has been discovered from an upper Guadalupian (Middle Permian) chert block of the Kamiaso Unit of the Mino terrane, central Japan. If this specimen was formed with double malformation, it would be the oldest record of this phenomenon in radiolarians and the first record of its kind in Albaillellaria.

Despite the importance of the Bering Sea for subarctic oceanography and climate, relatively little is known of the foraminifera from the extensive Aleutian Basin. We report the occurrence of modern deep-water agglutinated foraminifera collected at seven sites cored during Integrated Ocean Drilling Program (IODP) Expedition 323 in the Bering Sea. Assemblages collected from core-top samples contained 32 genera and 50 species and are described and illustrated here for the first time. Commonly occurring species include typical deep-water Rhizammina, Reophax, Rhabdammina, Recurvoides and Nodulina. Assemblages from the northern sites also consist of accessory Cyclammina, Eggerelloides and Glaphyrammina, whilst those of the Bowers Ridge sites consist of other tubular genera and Martinottiella. Of the studied stations with the lowest dissolved oxygen concentrations, the potentially Bering Sea endemic Eggerelloides sp. 1 inhabits the northern slope, which has the highest primary productivity, and the potentially endemic Martinottiella sp. 3 inhabits Bowers Ridge, which has the lowest oxygen concentrations but relatively low annual productivity. Martinottiella sp. 3, with open pores on its test surface, has previously been reported in Pliocene to Recent material from Bowers Ridge. Despite relatively small sample sizes, ecological constraints may imply that the Bering Sea experienced high productivity and reduced oxygen at times since at least the Pliocene. We note the partially endemic nature of the agglutinated foraminiferal assemblages, which may at least in part be due to basin restriction, the geologically long time period of reduced oxygen, and high organic carbon flux. Our results indicate the importance of gathering further surface sample data from the Aleutian Basin.

An exceptionally well-preserved specimen of the articulated rhodophyte Permocalculus, compared with P. tenellus sensu Elliott, 1955, is described from fine-grained Upper Permian limestones of the Khuff Formation of Saudi Arabia. Longitudinal medullary and sheaf-like cortical filaments extend through the uniserial series of elongate-globular, concave- and convex-terminating, interlocking segments for which they are interpreted to have functioned in articulation. The filaments tend to splay and branch laterally into the cortex where they terminate at the pores. At the terminal aperture, the filaments extend as bifurcating and possibly trifurcating branches and may serve as the origin of a new segment. Numerous elongate-globular chambers, up to five in each row and intimately involved with the filaments, are developed in the outer medulla and are considered to represent reproductive sporangia. The specimen is considered to have occupied predominantly low-energy, normal to slightly elevated salinity, shallow conditions within the subtidal regime of a lagoon.

ABSTRACTBackground:Some opportunities to routinely capture and improve respectful maternity care (RMC) during facility-based childbirth include quality improvement (QI) initiatives, community-based monitoring efforts through community score cards (CSC), and performance-based financing (PBF) initiatives. But there is limited guidance on which types of RMC indicators are best suited for inclusion in these initiatives. We sought to provide practical evidence-based recommendations on indicators that may be used for routine measurement of RMC in programs.Methods:We used a rapid review approach, which included (1) reviewing existing documents and publications to extract RMC indicators and identify which have or can be used in facility-based QI, CSCs, and PBF schemes; (2) surveying RMC and maternal health experts to rank indicators, and (3) analyzing survey data to select the most recommended indicators.Results:We identified 49 indicators spanning several domains of RMC and mistreatment including dignified/nondignified care, verbal and physical abuse, privacy/confidentiality, autonomy/loss of autonomy, supportive care/lack thereof, communication, stigma, discrimination, trust, facility environment/culture, responsiveness, and nonevidence-based care. Based on the analysis of the survey data, we recommend 33 indicators (between 2 and 6 indicators for each RMC domain) that may be suited for incorporation in both facility-based QI and CSC-related monitoring efforts.Conclusion:Integrating RMC indicators into QI and CSC initiatives, as well as in other maternal and neonatal health programs, could help improve RMC at the facility and community level. More research is needed into whether RMC can be integrated into PBF initiatives. Integration of RMC indicators into programs to improve quality of care and other health system outcomes will facilitate routine monitoring and accountability around experience of care. Measurement and improvement of women's experiences will increase maternal health service utilization and improve quality of care as a means of reducing maternal and neonatal morbidity and mortality.

ABSTRACTThe Standard Days Method (SDM), a modern fertility awareness-based family planning method, has been introduced in 30 countries since its development in 2001. It is still unclear to what extent the SDM was mainstreamed within the family planning method mix, particularly in low- and middle-income country (LMIC) settings, where the SDM had been introduced by donors and implementing partners. This review of implementation science publications on the SDM in LMICs first looked at community pilot studies of the SDM to determine the acceptability of the method; correct use and efficacy rates; demographics of users; and changes to contraceptive prevalence rates and family planning behaviors, especially among men and couples. Then, we examined the status of the SDM in the 16 countries that had attempted to scale up the method within national family planning protocols, training, and service delivery. At the community level, evidence demonstrated a high level of acceptability of the method; efficacy rates comparable to the initial clinical trials; diversity in demographic characteristics of users, including first-time or recently discontinued users of family planning; increased male engagement in family planning; and improved couple's communication. Nationally, few countries had scaled up the SDM due to uneven stakeholder engagement, lackluster political will, and competing resource priorities. Results of this review could help policy makers determine the added value of the SDM in the contraceptive method mix and identify potential barriers to its implementation moving forward.

ABSTRACTBackground:Female sex workers (FSWs) in Cameroon commonly have unmet need for contraception posing a high risk of unintended pregnancy. Unintended pregnancy leads to a range of outcomes, and due to legal restrictions, FSWs often seek unsafe abortions. Aside from the high burden of HIV, little is known about the broader sexual and reproductive health of FSWs in Cameroon.Methods:From December 2015 to October 2016, we recruited FSWs aged ≥18 years through respondent-driven sampling across 5 Cameroonian cities. Cross-sectional data were collected through a behavioral questionnaire. Modified-robust Poisson regression was used to approximate adjusted prevalence ratios (aPR) for TOP and current use of effective nonbarrier contraception.Results:Among 2,255 FSWs (median age 28 years), 57.6% reported history of unintended pregnancy and 40.0% reported prior TOP. In multivariable analysis, TOP history was associated with current nonbarrier contraceptive use (aPR=1.23, 95% confidence interval [CI]=1.07, 1.42); ever using emergency contraception (aPR=1.34, 95% CI=1.17, 1.55); >60 clients in the past month (aPR=1.29, 95% CI= 1.07, 1.54) compared to ≤30; inconsistent condom use with clients (aPR=1.17, 95% CI=1.00, 1.37); ever experiencing physical violence (aPR=1.24, 95% CI=1.09, 1.42); and older age. Most (76.5%) women used male condoms for contraception, but only 33.2% reported consistent condom use with all partners. Overall, 26.4% of women reported currently using a nonbarrier contraceptive method, and 6.2% reported using a long-acting method. Previous TOP (aPR=1.41, 95%CI=1.16, 1.72) and ever using emergency contraception (aPR=2.70, 95% CI=2.23, 3.26) were associated with higher nonbarrier contraceptive use. Recent receipt of HIV information (aPR=0.72, 95% CI=0.59, 0.89) and membership in an FSW community-based organization (aPR=0.73, 95% CI=0.57, 0.92) were associated with lower use nonbarrier contraceptive use.Conclusions:Experience of unintended pregnancies and TOP is common among FSWs in Cameroon. Given the low use of nonbarrier contraceptive methods and inconsistent condom use, FSWs are at risk of repeat unintended pregnancies. Improved integration of client-centered, voluntary family planning within community-led HIV services may better support the sexual and reproductive health and human rights of FSWs consistent with the United Nations Declaration of Human Rights.

ABSTRACTBackground:A significant number of girls are married as children, which negatively impacts their health, education, and development. Given the sheer numbers of girls at risk of child marriage globally, the challenge to eliminate the practice is daunting. Programs to prevent child marriage are typically small-scale and overlook the costs and scalability of the intervention.Implementation:This study tested and costed different approaches to preventing child marriage in rural Burkina Faso and Tanzania. The approaches tested were community dialogue, provision of school supplies, provision of a livestock asset, a model including all components, and a control arm. A quasi-experimental design was employed with surveys undertaken at baseline and after 2 years of intervention. We examined the prevalence of child marriage and school attendance controlling for background characteristics and stratified by age group. Programmatic costs were collected prospectively.Results:Among those in the community dialogue arm in Burkina Faso, girls aged 15 to 17 years had two-thirds less risk (risk ratio [RR]=0.33; 95% confidence interval [CI]=0.19, 0.60) of being married and girls aged 12 to 14 years had a greater chance of being in school (RR=1.18; 95% CI=1.07,1.29) compared to the control site. In Tanzania, girls aged 12 to 14 years residing in the multicomponent arm had two-thirds less risk of being married (RR=0.33; 95% CI=0.11, 0.99), and girls 15 to 17 in the conditional asset location had half the risk (RR=0.52; 95% CI=0.30, 0.91). All the interventions tested in Tanzania were associated with increased risk of girls 12 to 14 years old being in school, and the educational promotion arm was also associated with a 30% increased risk of girls aged 15 to 17 years attending school (RR=1.3; 95% CI=1.01, 1.67). Costs per beneficiary ranged from US$9 to US$117.Conclusion:The study demonstrates that minimal, low-cost approaches can be effective in delaying child marriage and increasing school attendance. However, community dialogues need to be designed to ensure sufficient quality and intensity of messaging. Program managers should pay attention to the cost, quality, and coverage of interventions, especially considering that child marriage persists in the most hard-to-reach rural areas of many countries.

ABSTRACTIntroduction:We evaluated a 2-way short message service (SMS) communication platform to improve continuation of pre-exposure prophylaxis (PrEP) for HIV prevention among Kenyan women who initiated PrEP within routine maternal child health (MCH) and family planning clinics.Methods:We adapted an existing SMS platform (Mobile WACh [mWACh]) to send PrEP-tailored, theory-based SMS and allow clients to communicate with a remote nurse. Women who did not have HIV and who were initiating PrEP at 2 MCH/family planning clinics in Kisumu County, Kenya, from February to October 2018, were offered enrollment into the mWACh-PrEP program; SMS communication was free. We evaluated acceptability, satisfaction, and implementation metrics. In a pre/postevaluation, we compared PrEP continuation at 1-month postinitiation among women who initiated PrEP in the period before (n=166) versus after mWACh-PrEP implementation, adjusting for baseline differences.Results:Of the 334 women who were screened for enrollment into the mWACh-PrEP program; 193 (58%) were eligible and of those, 190 (98%) accepted enrollment. Reasons for ineligibility (n=141) included no phone access (29%) and shared SIM cards (25%). Median age was 25 years (interquartile range=22–30), and 91% were MCH clients. Compared to women who initiated PrEP in the month before mWACh-PrEP implementation, women who enrolled in mWACh-PrEP were more likely to return for their first PrEP follow-up visit (40% vs. 53%; adjusted risk ratio [aRR]=1.26; 95% confidence interval [CI]= 1.06, 1.50; P=.008) and more likely to continue PrEP (22% vs. 43%; aRR=1.75; 95% CI=1.21, 2.55; P=.003). Among those who returned, 99% reported successful receipt of SMS through the mWACh-PrEP system and 94% reported that mWACh-PrEP helped them understand PrEP better. Concerns about PrEP use, how it works, and side effects accounted for the majority (80%) of issues raised by participants using SMS.Conclusions:Two-way SMS expanded support for PrEP and opportunities for dialogue beyond the clinic and enabled women to ask and receive answers in real time regarding PrEP, which facilitated its continued use.

ABSTRACTBackground:The focused assessment with sonography for HIV-associated tuberculosis (TB) (FASH) ultrasound protocol has been increasingly used to help clinicians diagnose TB. We sought to quantify the diagnostic utility of FASH for TB among individuals with HIV in Malawi.Methods:Between March 2016 and August 2017, 210 adults with HIV who had 2 or more signs and symptoms that were concerning for TB (fever, cough, night sweats, weight loss) were enrolled from a public HIV clinic in Lilongwe, Malawi. The treating clinicians conducted a history, physical exam, FASH protocol, and additional TB evaluation (laboratory diagnostics and chest radiography) on all participants. The clinician made a final treatment decision based on all available information. At the 6-month follow-up visit, we categorized participants based on clinical outcomes and diagnostic tests as having probable/confirmed TB or unlikely TB; association of FASH with probable/confirmed TB was calculated using Fisher's exact tests. The impact of FASH on empiric TB treatment was determined by asking the clinicians prospectively about whether they would start treatment at 2 time points in the baseline visit: (1) after the initial history and physical exam; and (2) after history, physical exam, and FASH protocol.Results:A total of 181 participants underwent final analysis, of whom 56 were categorized as probable/confirmed TB and 125 were categorized as unlikely TB. The FASH protocol was positive in 71% (40/56) of participants with probable/confirmed TB compared to 24% (30/125) of participants with unlikely TB (odds ratio=7.9, 95% confidence interval=3.9,16.1; P<.001). Among those classified as confirmed/probable TB, FASH increased the likelihood of empiric TB treatment before obtaining any other diagnostic studies from 9% (5/56) to 46% (26/56) at the point-of-care. For those classified as unlikely TB, FASH increased the likelihood of empiric treatment from 2% to 4%.Conclusion:In the setting of HIV coinfection in Malawi, FASH can be a helpful tool that augments the clinician's ability to make a timely diagnosis of TB.