In this paper we study manifolds $M_{Sigma}$ with fibered singularities, more specifically, a relevant space $Riem^{psc}(X_{Sigma})$ of Riemannian metrics with positive scalar curvature. Our main goal is to prove that the space $Riem^{psc}(X_{Sigma})$ is homotopy invariant under certain surgeries on $M_{Sigma}$.

Spiking neural networks (SNNs) are considered as a potential candidate to overcome current challenges such as the high-power consumption encountered by artificial neural networks (ANNs), however there is still a gap between them with respect to the recognition accuracy on practical tasks. A conversion strategy was thus introduced recently to bridge this gap by mapping a trained ANN to an SNN. However, it is still unclear that to what extent this obtained SNN can benefit both the accuracy advantage from ANN and high efficiency from the spike-based paradigm of computation. In this paper, we propose two new conversion methods, namely TerMapping and AugMapping. The TerMapping is a straightforward extension of a typical threshold-balancing method with a double-threshold scheme, while the AugMapping additionally incorporates a new scheme of augmented spike that employs a spike coefficient to carry the number of typical all-or-nothing spikes occurring at a time step. We examine the performance of our methods based on MNIST, Fashion-MNIST and CIFAR10 datasets. The results show that the proposed double-threshold scheme can effectively improve accuracies of the converted SNNs. More importantly, the proposed AugMapping is more advantageous for constructing accurate, fast and efficient deep SNNs as compared to other state-of-the-art approaches. Our study therefore provides new approaches for further integration of advanced techniques in ANNs to improve the performance of SNNs, which could be of great merit to applied developments with spike-based neuromorphic computing.

By Sci Dev Net Advances in printed solar cell technology promise clean renewable energy, opening possibilities for 1.3 billion people still without electric power in developing countries. The technology, which only requires the use of existing industrial-size printers, can produce … Continue reading →

There are no legal skirmishes in Ford v Ferrari.…

[IMAGE-1] Harrison Ford has gone full Grizzly Adams and Buck the canine hero is fully CGI, 100-percent digital, not a scrap of real fur or dog farts about him. There is so much about this new umpteenth film version of Jack London's classic novel The Call of the Wild that is ready-made for meme-iriffic snarking.…

On any other week, you can rely on the Inlander for information on live shows happening in Spokane and North Idaho, and to read about the artists and music festivals that we think are worth your time.…

By Johnny Diaz The New York Times Company…

Injection molded articles and process of forming the same are described herein. The processes generally include providing a polyolefin including one or more propylene heterophasic copolymers, the polyolefin having an ethylene content of at least 10 wt. % based on the total weight of the polyolefin; contacting the polyolefin with a polylactic acid and a reactive modifier to form a compatiblized polymeric blend, wherein the reactive modifier is produced by contacting a polypropylene, a multifunctional acrylate comonomer, and an initiator under conditions suitable for the formation of a glycidyl methacrylate grafted polypropylene (PP-g-GMA) having a grafting yield in a range from 1 wt. % to 15 wt. %; and injection molding the compatibilized polymeric blend into an article.

A long-fiber-reinforced resin composition including (A) a long-fiber-reinforced thermoplastic resin pellet including a thermoplastic resin, a modified polyolefin-based resin modified with an unsaturated carboxylic acid or its derivative and reinforcing fiber and satisfying (A-1) the melt index of the thermoplastic resin is 100-250 g/10 min, (A-2) the relaxation time λ of the thermoplastic resin is 0.1 (sec) or less, (A-3) the content of the reinforcing fiber is 40-70 wt %, and (A-4) the content of the modified polyolefin-based resin is 1-5 wt %; and (B) a polyolefin-based resin satisfying (B-1) the melt index of the polyolefin-based resin is 20-70 g/10 min, and (B-2) the relaxation time λ of the polyolefin-based resin is 0.23 (sec) or less; wherein the content of reinforcing fiber contained in (A) is 20-60 wt % relative to the total amount of the fiber-reinforced resin composition.

A molding composition formulation includes a thermoset cross-linkable 12 to 45 micron polymeric resin. Hollow glass microspheroids are present from 2 to 12 total weight percent. An article formed from such a composition is further strengthened by the addition of a surface activating agent bonded to the surface of the glass microspheroids. Conventional particulate fillers when added to an inventive formulation provide enhanced performance when the filler particle has a size sufficiently small to insert within adjacent microspheroid interstitial voids. An unsaturated polyester resin so formed is particularly well suited for the formation of sheet molding compound formulations.

The invention relates to a method for producing thermoplastic molding compounds, comprising: A) 40 to 99 wt % of at least one thermoplastic polymer, B) 1 to 60 wt % of a flame-proofing agent component containing an expandable graphite, and C) 0 to 60 wt % of further additives, by melt-mixing components A), B) and C) in a screw-type extruder, wherein the screw-type extruder, along the feed direction, comprises, in the following order, at least one dosing zone, a plastifying zone, a homogenizing zone, a second dosing zone, and a discharge zone, in that the dosing takes place into the screw-type extruder having the length L, wherein the length L is defined as the section starting with the first dosing unit for adding components A, B and/or C and ending, in the feed direction, at the discharge opening, a melt is generated after adding components A, B and C in the range of 0 liter to 0.15 liter in a first method step in the presence of component B1), and in a second method step, after the addition of component B1) in the range of 0.5 liter to 0.95 liter, component B1) is mixed into said melt, wherein said method offers technical advantages.

Disclosed is an epoxy resin composition used for encapsulation of a semiconductor containing an epoxy resin (A), a curing agent (B), an inorganic filler (C) and a mold releasing agent, in which the mold releasing agent contains a compound (D) having a copolymer of an α-olefin having 28 to 60 carbon atoms and a maleic anhydride esterified with a long chain aliphatic alcohol having 10 to 25 carbon atoms.

A UV curable silicone rubber composition is provided. The composition does not undergo curing failure, foaming, and other undesirable conditions even if a water-containing inorganic filler such as zeolite were added. A UV curable silicone rubber composition comprising (A) 100 parts by weight of an organopolysiloxane having at least 2 alkenyl groups per molecule represented by the average compositional formula (I): R1aSiO(4-a)/2 (I) (wherein R1 is independently a substituted or unsubstituted monovalent hydrocarbon group, and a is a positive number of 1.95 to 2.05); (B) 1 to 300 parts by weight of an inorganic filler having a water content of at least 0.5% by weight; (C) 0.1 to 50 parts by weight of an organohydrogenpolysiloxane having at least 2 silicon-bonded hydrogen atoms per molecule; and (D) a catalytic amount of a photoactive platinum complex curing catalyst.

Methods and systems for managing data loads on a cluster of processors that implement an iterative procedure through parallel processing of data for the procedure are disclosed. One method includes monitoring, for at least one iteration of the procedure, completion times of a plurality of different processing phases that are undergone by each of the processors in a given iteration. The method further includes determining whether a load imbalance factor threshold is exceeded in the given iteration based on the completion times for the given iteration. In addition, the data is repartitioned by reassigning the data to the processors based on predicted dependencies between assigned data units of the data and completion times of a plurality of the processers for at least two of the phases. Further, the parallel processing is implemented on the cluster of processors in accordance with the reassignment.

A cleansing composition for cosmetic or household use may include an ampholytic polymer; a crosslinked cationic polymer; a surfactant component selected from the group consisting of anionic surfactants, amphoteric surfactants, cationic surfactants, nonionic surfactants, and zwitterionic surfactants; and an aqueous and/or organic carrier.

A method for inhibiting the crystal growth rate of an amide compound present in a molten polyolefin-based resin and a method for producing a polyolefin-based resin molded article are provided. A phenol compound is incorporated into an amide compound-containing polyolefin-based resin such that a weight ratio, amide compound:phenol compound, is 60:40 to 10:90.

The present invention is: a curable resin composition comprising a thermoplastic resin (A), a curable monomer (B), and a photoinitiator (C), the thermoplastic resin (A) including an aromatic ring in its molecule, and having a glass transition temperature (Tg) of 140° C. or more, and the photoinitiator (C) having an absorbance at 380 nm of 0.4 or more when measured in a 0.1 mass % acetonitrile solution; a curable resin formed article obtained by forming the curable resin composition; a cured resin formed article obtained by curing the curable resin formed article; a laminate comprising at least one layer that is formed of a cured resin obtained by curing the curable resin composition. The present invention provides: a cured resin formed article that exhibits excellent heat resistance, includes only a small amount of residual low-boiling-point substance (e.g., solvent and curable monomer), and has small in-plane retardation, a method for producing the same, a curable resin composition and a curable resin formed article that are useful as a raw material for producing the cured resin formed article, and a laminate that includes a layer formed of a cured resin.

A centrifuge concentrator bowl has feed deposited onto a base of the bowl and includes a plurality of recesses at axially spaced positions along a peripheral wall of the bowl. The peripheral wall is formed of a rigid metal skeleton frame of rings and upstanding support members on which is molded a urethane liner material to form an integral structure with the rings located at ribs between the recesses. A fluidization water injection system includes an outer container on the bowl, which also acts as a clamping assembly and a plurality of liquid entry openings through the peripheral wall at the base of the recesses allowing flexing of the peripheral wall in response to changes in pressure in the fluidizing liquid. The bowl is formed of separate sections defined by a bottom concave base section and the cast skeleton wall all clamped together to allow replacement of the separate parts.

Methods, systems, and apparatus, including computer program products, for determining energy indicator values for a plurality of thermoplastic materials. An energy indicator value represents expected energy requirements for performing an injection of the material in a mold cavity. An injection of each of a plurality of thermoplastic materials in a first modeled mold cavity is simulated. A respective value of a first expected energy parameter is determined for each of the plurality of thermoplastic materials based on the simulated injections. A respective energy indicator is determined, for each of the plurality of thermoplastic materials, based at least on the corresponding value of the first expected energy parameter. The respective energy indicator value of one or more of the plurality of thermoplastic materials is presented.

Disclosed is a mold hanger for supporting a bottle mold in a blow molding station, the mold hanger comprising a piston and piston sleeve fully contained within the mold hanger configured to push a moveable insert into the mold. Also disclosed is a method of retrofitting an original rotatable blow molding module having multiple existing blow molding stations, each existing mold hanger defining an existing outer envelope. The disclosed method may include providing an improved mold hanger substantially contained within the respective existing outer envelope and including low-profile drive mechanisms configured opposably to drive moveable inserts into the mold. Further disclosed is a method of manufacturing a blow molded bottle with a deep pinch grip, the method including providing within a mold hanger a drive mechanism to drive a moveable insert into the mold. A bottle made by such methods is also disclosed.

Disclosed herein is an injection molding apparatus. That apparatus includes an axially extending bar shaped support bar and an inner mold that has a plurality of internal parts surrounding the support bar and is axially divided into a plurality of parts in which one or more corresponding parts in the inner parts have an inner circumferential surface width the same or larger than an outer circumferential surface width. The apparatus further includes an outer mold that has a plurality of axially divided external parts surrounding the inner mold and has a space between the inner circumferential surface of the outer mold and the outer circumferential surface of the inner mold.

A tool (1000) includes a mold defining a cavity (1002). The cavity can be for receiving a glass layer (402). A floating core insert (1001) can be placed in the cavity to apply a preloading force against a first major face of the glass layer, preclude an overmolding operation on the first major face, and allow overmolding only on minor faces of the glass layer when polymeric material (1100) is injected into runners (1018,1019,1020) of the tool.

A method for producing a resin molding die (13) for molding a first substrate (2) having a flow path (2b) and a through-hole (2a), wherein a base die (10) having a concave part (10b) corresponding to the flow path (2b) and a through-hole (10a) corresponding to through-hole (2a) and deeper than the concave part (10b) is prepared, the base die (10) is subjected to electroforming with a first material and is then subjected to electroforming with a second material which is different from the first material, and a protruding part for forming through-hole (10a) by removing the first material that was electrodeposited on through-hole (10a) is formed. The first material has a smaller electroforming stress than the second material, the first material exerts a higher adhesiveness with regard to the base die than the second material, and the second material is harder than the first material.

An injection molding machine includes an ejector unit configured to eject a molding product from a mold and a mold release force sensor configured to detect a force to release the molding product from the mold.

An injection molding machine includes an ejector unit configured to eject a molding product from a mold. The ejector unit includes a support provided on a platen to which the mold is attached, a slidable base configured to slide relative to the support, a transmission mechanism supported by the support and configured to convert an input into an output corresponding to the distance between the support and the slidable base and transmit the output to the slidable base, a drive source configured to cause the transmission mechanism to operate, an ejection member configured to move together with the slidable base, and an adjustment mechanism configured to adjust the position of the slidable base relative to the ejection member.

A molding apparatus for making a continuous molded article or continuous series of molded articles generally includes a pair of spaced-apart molding assemblies, which cooperatively generate a movable mold having a dynamic mold-cavity therein, each of the molding assemblies including a series of movable mold segments, which are adapted to fit together to form a portion of the dynamic mold-cavity, a drive mechanism for conveying the mold segments along a path, and a dispenser for dispensing a moldable, expandable material into the dynamic mold-cavity.

The present utility model provides a mold set used for dumpling or dumpling-like food product formation comprising a pair of jaws, the closure of which is configured to clamp a dough pad over a filling thereby forming a raw product of the dumpling or dumpling-like food product, wherein the jaws in a closed condition can be driven to simulate the human action of compressing a filling pocket of the dumpling or dumpling-like food product.

An injection molding system is disclosed that utilizes a melt channel wherein at least a portion of the melt channel has a noncircular cross-section for balancing shear in a melt stream of moldable material that flows therethrough. The noncircular cross-section of the melt channel portion may be, for e.g., capsule-shaped, extended egg-shaped, oval, teardrop-shaped, or peanut-shaped. A flow splitter is also disclosed that is positioned offset from a central axis of an upstream melt channel to protrude between inlets of respective downstream melt channels, where the upstream melt channel splits into the downstream melt channels, to thereby create a narrower inlet into one of the downstream melt channels and a wider inlet into the other of the downstream melt channels.

An actuator for an injection molding tool includes a housing, a plunger and a slide member. The housing includes an aperture extending therethrough and a first recess extending through an open end of the aperture. The plunger is slidably received in the aperture and is movable therein relative to the housing between first and second positions. The plunger may include a second recess formed therein that cooperates with the first recess to define a cavity when the plunger is in the first position. The slide member slidably engages the plunger for movement relative to the plunger between an extended position in which the slide member extends into the cavity and a retracted position in which the slide member is retracted out of the cavity.

Provided is a technology with which, when producing a resin molded article, the inside of which is provided with an insert component such as a terminal fitting, it is possible to prevent the insert component from being exposed at an inappropriate position, and to ensure the desired positional accuracy. In an injection molding device, the accuracy of the position of a terminal is improved by allowing a core-back mold to move after a terminal, which is an insert component, has been inserted in a terminal tip holding section of a slide mold. By allowing the core-back mold to move by only a prescribed amount prior to injection molding, a resin wall is formed between the core-back mold and the terminal. The inappropriate exposure and shorting of and the adhesion of foreign substances to, and the like, the terminal can thus be prevented.

A unitary elastic mold and cutter combination configured to mold and cut moldable material is disclosed herein. The mold and cutter combination comprises an elastic mold cavity having an elastic bottom wall with an embossed inner surface and an elastic sidewall extending from and unitary with a perimeter of the bottom wall. An elastic cutting blade extends from and is unitary with the sidewall of the mold cavity and is configured to cut moldable material and maintain a substantially consistent perimeter upon cutting. The cutting blade comprises a cutting edge disposed between an inner cutting blade surface and an outer cutting blade surface. The mold and cutter combination may have an elasticity sufficient to release molded material therefrom by hand stretching, wherein the cutting edge, inner cutting blade surface, and the inner surface of the sidewall of the mold cavity are stretched by an amount sufficient to release the molded material.

A molding apparatus for making a continuous molded article generally includes a pair of spaced-apart molding assemblies, which cooperatively generate a movable mold having a dynamic mold-cavity therein, each of the molding assemblies including a series of movable mold segments, which are adapted to fit together to form a portion of the dynamic mold-cavity, a drive mechanism for conveying the mold segments along a path, and a dispenser for dispensing a moldable, expandable material into the dynamic mold-cavity.

In a gas turbine engine that includes a compressor and a combustor, wherein the combustor includes a primary fuel injector within a fuel nozzle and a secondary fuel injector that is upstream of the fuel nozzle and configured to inject fuel into a flow annulus of the combustor, a method for detecting a flame holding condition about a fuel injector. The method may include the steps of: detecting an upstream pressure upstream of the secondary fuel injector; detecting a downstream pressure downstream of the secondary fuel injector; determining a measured pressure difference between the upstream pressure and the downstream pressure; and comparing the measured pressure difference to an expected pressure difference.

A microphone holder for mounting a microphone on a drum includes a vertical plate having an inner side surface which is adapted to face the drum, and a microphone connecting device, a clip member, and a positioning plate connected fixedly to the vertical plate. The microphone connecting device is adapted to hold the microphone thereon. The clip member clamps a vertical bolt that interconnects a drum body and a drum skin frame. The positioning plate is disposed above the clip member, and has a horizontal top plate section with a bottom surface that is adapted to abut against an upper end of the vertical bolt, and two vertical side plate sections which extend respectively and integrally from two opposite sides of the top plate section, and which are adapted to flank a projection on the drum skin frame through which the vertical bolt extends so as to prevent rotation of the clip member on the vertical bolt.

A holding body includes a fastening layer which has a fastening surface configured to fasten a flexible grinding device. The fastening layer includes an air- and dust-permeable material and is substantially full-surface. The fastening layer includes a textile material. The holding body also includes a supporting body which has a supporting surface configured to support a holding surface of the fastening layer. The supporting body is air- and dust-permeable and includes an open-cell foam. A grinding system includes such a holding body and such a flexible grinding device.

Flat-surfaced workpieces such as semiconductor wafers or sapphire disks are attached to a rotatable floating workpiece holder carrier that is supported by a pressurized-air flexible elastomer sealed air-chamber device and is rotationally driven by a lug-pin device. The rotating wafer carrier rotor is restrained by a set of idlers that are attached to a stationary housing to provide rigid support against abrading forces. The abrading system can be operated at the very high abrading speeds used in high speed flat lapping with raised-island abrasive disks. The range of abrading pressures is large and the device can provide a wide range of torque to rotate the workholder. Vacuum can also be applied to the elastomer chamber to quickly move the wafer away from the abrading surface. Internal constraints limit the axial, lateral and circumferential motion of the workholder. Wafers can be quickly attached to the workpiece carrier with vacuum.

A machine tool having a turning function and a milling function includes a spindle, a spindle housing supporting the spindle in a rotatable manner, a main clamp provided at the spindle, an auxiliary clamp provided at the spindle housing, and a double arm with a first gripper and a second gripper. The auxiliary clamp clamps a tool holder together with the main clamp during fixing a fixed tool. The double arm exchanges a tool holder grasped at the first gripper for another tool holder grasped at the second gripper by rotating and sliding movements. The auxiliary clamp is arranged at a position not interfering with the double arm that moves during exchanging tool holders. By such a configuration, a machine tool achieving a clamping force sufficient to withstand the load during a turning process, and that allows tool exchange in a short period of time, and a tool holder employed in such a machine tool, can be provided.

There is provided a tool holding and conveying chain adapted to securely lock and position a tool pot, i.e., a connecting pin, to a pin hole of either an outer or inner link plate so that the tool pot does not to turn and to achieve steady and smooth attachment and removal of a tool in and out of the tool pot with a simple attachment structure. The tool pot has a pair of positioning flat portions formed by cutting a link plate attaching outer circumferential region of the tool pot and the outer link plate has a pair of positioning cooperative flat portions formed so as to bulge out of an inner circumference to a center of a pin hole. The positioning flat portions of the tool pot is fitted into and locked by the positioning cooperative flat portions when the tool pot is attached in the link plate.

A carriage is moved in a direction including a Y axis component in order to move a turning process tool that is attached to a tool spindle along a horizontal line that is perpendicular to a Z axis, and thus, a turning process is carried out on a workpiece which is attached to a workpiece spindle.

A toolholder assembly includes a toolholder body having a coolant passage and a cutting insert seated within a recess of the body. The cutting insert includes an insert orifice extending between a top face and a bottom face that aligns with the coolant passage. A lock pin includes a lock pin orifice that aligns with and is in fluid communication with the coolant passage of the body. The lock pin orifice has an outlet port to allow the fluid to flow through the lock pin orifice and exit through the outlet port. A lock pin ring includes a coolant port in fluid communication with the outlet port of the lock pin to effectively discharge cooling fluid in the direction of a cutting area of the cutting insert.

A cutting tool used for grooving and turning operations where a cutting insert is resiliently securable in a holder blade. The cutting insert includes an insert central lower surface located between, and recessed with respect to, two insert lower component surfaces, each having an insert lower abutment surface. At least one of the two insert lower component surfaces includes an insert inner curved ramp extending from its insert lower abutment surface to the adjacent insert lower intermediate surface and at least the other of the two insert lower component surfaces includes an insert outer curved ramp extending from its insert lower abutment surface to an adjacent end surface.

In order to newly provide a folder that facilitates insertion of a document fastener into a narrow slit and that is improved in durability by making use of a property of a document fastener whose folded state can be kept due to resin, the document fastener is so arranged to comprise a plate material (a) made of resin having a body part (11) extending longitudinally and a pair of folded pieces (12) extending from the body part (11), wherein a thickness of both end portions (14) of the plate material (a) is formed to be thinner than a thickness of other portions of the plate material (a), a boundary (13) between the body part (11) and the folded piece (12) is made to be foldable, and the folded state on the boundary (13) can be kept by making use of the properties of the resin itself.

A sheet holder for holding a sheet of paper and exposing an edge of the sheet, has a press for holding the paper sheet and exposing the edge, and a lever for operating the press. The lever is movable between a released position for placing of the edge of the paper sheet in the press and a holding position for operating the press. There is also an abutment for abutment by the edge of the paper sheet to position the edge relative to the press while the lever is in the released position. The abutment is associated with the lever for moving away from the edge of the paper sheet when the lever moves towards the holding position, thereby exposing the edge of the paper sheet.

The present invention relates to a diesel oxidation catalyst comprising a carrier substrate, and a first washcoat layer disposed on the substrate, the first washcoat layer comprising palladium supported on a support material comprising a metal oxide, gold supported on a support material comprising a metal oxide, and a ceria comprising compound, as well as a process for the preparation of such catalyst.

A vibration damper, including a cover plate with an annular portion, and a spring portion including spring retaining portions forming respective spaces and a spring blocking portions including respective protrusion segments and respective tab segments including respective portions of an edge of the cover plate and having a same first thickness. The damper includes springs at least partially located in the respective spaces, and having respective longitudinal ends, and a second cover plate or output flange connected to the cover plate. The springs are arranged to transmit torque to the cover plate. The respective protrusion segments have a same second thickness and include respective protrusions. Respective first portions of the longitudinal ends of the springs are engaged with the respective protrusions. Respective second portions of the longitudinal ends of the springs are engaged with the respective tab segments.

The flexible glove holder (1) includes a flat structure (13) with three branches (2, 3 and 4) forming an S-shape on which the glove is wound. The holder (1) is then pushed into the opening of the glove box. This rapid action method makes it possible to avoid knotting the gloves when they must be drawn toward the outside for an operation within the box and also allows the implementation of biological protection on the opening of the glove box as well as a protection of the agents against radiation.

A liquid crystalline polyester composition containing at least 100 parts by weight of liquid crystalline polyester (A) and 10 to 100 parts by weight of talc (B). The talc (B) has a ratio (a1/a2) of oil absorption (a1) ml/100 g to specific surface area (a2) m2/g in a range of 14.0 to 26.0 (ml·g)/(100 g·m2) and has a number-average particle diameter of 10 to 30 μm.

An optical disc device according to the present invention performs, in parallel, a first control to convey a first tray in the first optical disc drive group from the disc replacing position to the recording and reproducing position, and a second control to convey a second tray in the second optical disc drive group 40R from the recording and reproducing position to the disc replacing position. The second tray is opposed to the first tray.

A holding portion includes at least three pressing members which are operable to press an inner peripheral of a hole formed on the medium. The pressing members are movable between first positions where the pressing members do not come in contact with the inner peripheral and second positions where the pressing members come in contact with and press the inner peripheral. Each of the pressing members is adapted to interlockingly move with each other when moving toward the first positions and to press the inner peripheral independently from the other members when positioning the second positions.

Provided is an objective lens driving unit that prevents an electrical short circuit between very closely spaced second terminals in the objective lens driving unit. The objective lens driving unit is capable of being used in a slim-type optical disc drive.