This morning hundreds of ladybirds were flying through the air and massing on the white walls of the house. I managed to get a few clear macro photographs.

The sun was shining and the ladybirds seemed to be attracted to anything white. I stuck a white T-shirt on and headed outside. Pretty soon I was covered in them and could pluck them from my shirt to get some close ups using my little Canon IXUS 60.

At some point a ladybird took off just before I tried to photograph it and I decided I’d try to capture that moment. A few minutes later I’d worked out that I could prompt one of the insects to walk up my finger like the stem of a flower, that they’d take off when they reached the tip, and that they took up a distinct posture just before their wing-case shot open.

The speed at which they prepare to take off, open their wings, and fly away is so quick that I just had to take the shot as soon as I saw a ladybird get into the “take-off position” and hope that I reacted fast enough to get a picture of the open wing-case.

Over the weekend two new HTML5 elements – summary and figcaption – were added to the draft specification. The introduction of summary and figcaption marks the acceptance that new elements are needed to act as captions or legends for the details and figure elements. The addition of the figcaption element finally begins to clear up the difficulty in marking-up figure element captions and looks to cement the place of the figure element in the HTML5 specification. The summary element does much the same for the details element but the very nature of the details element itself means that its future is not yet clear.

The figcaption element

This new element acts as the optional caption or legend for any content contained within its parent figure element.

If there is no figcaption element within a figure element then there is no caption for the rest of its content. If there is a figcaption element then it must be the first or last child of the figure element and only the first figcaption element (should there be more than one child figcaption of the parent figure element) represents a caption.

The figure element is used to mark up any self-contained content that may be referenced from the main flow of a document but could also be removed from the primary content (for example, to an appendix) without affecting its flow. This makes it suitable for various types of content ranging from graphs and data tables to photographs and code blocks.

<p><a href="#fig-ftse">Figure 1</a> shows the extent of the collapse in the markets and how recovery has been slow.</p>

<figure id="fig-ftse">
  <figcaption>Figure 1. The value of the FTSE 100 Index from 1999&ndash;2009.</figcaption>
  <img src="ftse-100-index-graph.jpg" alt="The index hit a record high at the end of 1999 and experienced two significant drops in the following last decade.">
</figure>

<p>This latest financial crisis hasn't stopped Alex from writing music and his latest track is actually worth listening to.</p>

<figure>
  <audio src="what-am-i-doing.mp3" controls></audio>
  <figcaption><cite>What am I doing?</cite> by Alex Brown</figcaption>
</figure>

The creation of the figcaption element is an important step forward for the HTML5 draft specification as it finally provides a reliable means to markup the caption for content that is best marked up as a figure. Previous attempts to use the legend element, the caption element, and the dt and dd elements had failed due to a lack of backwards compatibility when it came to styling these elements with CSS.

The summary element

This new element represents a summary, caption, or legend for any content contained within its parent details element.

The summary element must be the first child of a details element and if there is no summary element present then the user agent should provide its own. The reason for this is because the details element has a specific function – to markup additional information and allow the user to toggle the visibility of the additional information. Although it is not specified in the specification, it is expected that the summary element will act as the control that toggles the open-closed status of the contents of the parent details element.

<details>
  <summary>Technical details.</summary>
  <dl>
    <dt>Bit rate:</dt> <dd>190KB/s</dd>
    <dt>Filename:</dt> <dd>drum-and-bass-mix.mp3</dd>
    <dt>Duration:</dt> <dd>01:02:34</dd>
    <dt>File size:</dt> <dd>78.9MB</dd>
  </dl>
</details>

The introduction of the summary element seems to secure the future of the details element and the new behaviour that it affords, for now. When user agents begin to add support for the details element you won’t need JavaScript, or even CSS, to have expanding or collapsing sections in an HTML document.

The future of the details element

There will continue to be some debate over the inclusion of behaviour in an HTML specification especially given the widespread use of JavaScript to provide the expand-collapse functionality that details describes.

The details element writes some quite significant behaviour into an HTML document and I can see it being abused to provide generic expand-collapse functionality throughout a document. It is also not entirely clear what purpose the details element actually serves other than being an attempt to bypass the need for JavaScript or CSS to expand or collapse sections of a document.

There has been a general softening of the rough distinction between content, presentation, and behaviour. JavaScript libraries are being used to patch holes in browser CSS and HTML5 support, the CSS3 modules introduce plenty of behaviour that was previously only possibly with JavaScript, and the HTML5 specification is also introducing functionality and behaviour that previously required the use of JavaScript.

The future survival of the details element, and the behaviour associated with it, may well depend on browser implementations and author applications over the coming months.

This is a quick experiment that reproduces an image from I Love Typography using semantic HTML, CSS 2.1, a little CSS3. Along the way, I learnt about a few modern browser bugs and inconsistencies.

• See the demo: CSS typography experiment.
• See the bugs: Some new CSS 2.1 and CSS3 bugs in modern browsers.

I came across an image on I Love Typography that I thought could be reproduced using only semantic HTML and CSS.

The idea was to reproduce the image from simple markup, and to rely as much as possible on what can be achieved with CSS.

This is the HTML I ended up using.

<p>I love <strong>typography</strong> <em>a lot</em></p>

This is the CSS that controls the presentation of that content.

body {
  padding: 0;
  margin: 0;
  font-family: Times New Roman, serif;
  background: #000;
}

p {
  position: relative;
  width: 1100px;
  padding: 100px 0 0;
  margin: 0 auto;
  font-size: 175px;
  font-weight: bold;
  line-height: 1.2;
  letter-spacing: -13px;
  color: #0caac7;
  transform: rotate(-20deg);
}

/* "i" */
p:first-letter {
  float: left;
  margin: -137px -20px 0 0;
  font-size: 880px;
  line-height: 595px;
  text-transform: lowercase;
}

/* "love" */
p:first-line {
  font-size: 200px;
}

/* "typography" */
p strong {
  display: block;
  margin: -80px 0 0;
  font-weight: normal;
  letter-spacing: -2px;
  text-transform: capitalize;
}

p strong:first-letter {
  margin-right: -30px;
  color: #fff;
}

/* "a lot" */
p em {
  position: absolute;
  z-index: 10;
  top: 100px;
  left: 147px;
  width: 136px;
  overflow: hidden;
  padding-left: 64px;
  font-size: 200px;
  font-style: normal;
  text-transform: lowercase;
  color: #fff;
}

p em:first-letter {
  float: left;
  margin: 130px 0 0 -55px;
  font-size: 80px;
  font-style: italic;
  line-height: 20px;
  color: #fff;
}

/* create the heart shape */
p:before,
p:after {
  content: "";
  position: absolute;
  z-index: 1;
  top: 225px;
  left: 120px;
  width: 75px;
  height: 50px;
  background: #000;
  transform: rotate(45deg);
  border-radius: 25px 0 0 30px;
}

p:after {
  left: 138px;
  transform: rotate(-45deg);
  border-radius: 0 25px 30px 0;
}

/* hide the tip of the "t" from "a lot" */
p strong:before {
  content: "";
  position: absolute;
  z-index: 11;
  top: 205px;
  left: 341px;
  width: 7px;
  height: 7px;
  background: #000;
  border-radius: 7px;
}

The final CSS typography experiment approximates the original image in all modern browsers that support the CSS3 properties of border-radius and transform.

Some browsers render type (especially after rotational transformations) better than others. Note that all the screenshots are taken from browsers running on Windows Vista OS.

Browser bugs and inconsistencies

I’ve put together a small test page to highlight some new CSS 2.1 and CSS3 bugs in modern browsers. It includes two new CSS 2.1 bugs in Internet Explorer 8.

Using SVG is currently the best way to create icon libraries for apps. Icons built with SVG are scalable and adjustable, but also discrete, which allows them to be incrementally loaded and updated. In contrast, icons built as fonts cannot be incrementally loaded or updated. This alone makes SVG icons the better choice for high-performance apps that rely on code-splitting and incremental deploys.

This post describes how to make a package of React components from a library of SVG icons. Although I’m focusing on React, making any other type of package is also possible. At Twitter I used the approach described here to publish the company’s SVG icon library in several different formats: optimized SVGs, plain JavaScript modules, React DOM components, and React Native components.

Using the icons

The end result is a JavaScript package that can be installed and used like any other JavaScript package.

yarnpkg add @acme/react-icons

Each icon is available as an individually exported React component.

import IconCamera from '@acme/react-icons/camera';

This allows your module bundler to package only the icons that are needed, and icons can be efficiently split across chunks when using code-splitting. This is a significant advantage over icon libraries that require fonts and bundle all icons into a single component.

// entire icon library is bundled with your app
import Icon from '@acme/react-icons';
const IconCamera = <Icon name='camera' />;

Each icon is straightforward to customize (e.g., color and dimensions) on a per-use basis.

import IconCamera from '@twitter/react-icons/camera';
const Icon = (
  <IconCamera
    style={{ color: 'white', height: '2em' }}
  />
);

Although the icons render to SVG, this is an implementation detail that isn’t exposed to users of the components.

Creating components

Each React component renders an inline SVG, using path and dimensions data extracted from the SVG source files. A helper function called createIconComponent means that only a few lines of boilerplate are needed to create a component from SVG data.

import createIconComponent from './utils/createIconComponent';
import React from 'react';
const IconCamera = createIconComponent({
  content: <g><path d='...'></g>,
  height: 24,
  width: 24
});
IconCamera.displayName = 'IconCamera';
export default IconCamera;

This is an example of what the createIconComponent function looks like when building components for a web app like Twitter Lite, which is built with React Native for Web.

// createIconComponent.js
import { createElement, StyleSheet } from 'react-native-web';
import React from 'react';

const createIconComponent = ({ content, height, width }) =>
  (initialProps) => {
    const props = {
      ...initialProps,
      style: StyleSheet.compose(styles.root, initialProps.style),
      viewBox: `0 0 ${width} ${height}`
    };

    return createElement('svg', props, content);
  };

const styles = StyleSheet.create({
  root: {
    display: 'inline-block',
    fill: 'currentcolor',
    height: '1.25em',
    maxWidth: '100%',
    position: 'relative',
    userSelect: 'none',
    textAlignVertical: 'text-bottom'
  }
});

Setting the fill style to currentcolor allows you to control the color of the SVG using the color style property instead.

All that’s left is to use scripts to process the SVGs and generate each React component.

Creating icon packages

A complete example of one way to do this can be found in the icon-builder-example repository on GitHub.

The project structure of the example tool looks like this.

.
├── README.md
├── package.json
├── scripts/
    ├── build.js
    ├── createReactPackage.js
    └── svgOptimize.js
└── src/
    ├── alerts.svg
    ├── camera.svg
    ├── circle.svg
    └── ...

The build script uses SVGO to optimize the SVGs, extract SVG path data, and extract metadata. The example packager for React then uses templates to create a package.json and the React icon components shown earlier.

import createIconComponent from './utils/createIconComponent';
import React from 'react';
const ${componentName} = createIconComponent({
  height: ${height},
  width: ${width},
  content: <g>${paths}</g>
});
${componentName}.displayName = '${componentName}';
export default ${componentName};

Additional packagers can be included to build other package types from the same SVG source. When the underlying icon library changes, it only takes a couple of commands to rebuild hundreds of icons and publish new versions of each package.

The Agriculture Produces Market Committee (APMC) in Navi Mumbai on Friday decided to shut all five markets — vegetables, fruits, masala, grain and oni

The NCMC chaired by Cabinet Secretary Rajiv Gauba met on Friday to review the situation arising out of the gas leak

Caudle, Gerrie

Greene, Jeffrey R., author

Ferguson, Matt

Inmon, William H

Schoner, Bernd

Wells, April. author

Bose, Tapan K., author

Frisendal, Thomas. author

Festival of Water (2004 : India International Centre)

Satheesh, Mithun, author

Munson, Chuck, author

Davies, Joseph, 1962-

Wildermuth, Daniel

Grinberg, Alex. author

Kerkhof, Twan van de, author

Interview with Alexander T. Sandhu, MD, MS, author of Association Between Offering Limited Left Ventricular Ejection Fraction Echocardiograms and Overall Use of Echocardiography

Interview with Neelam A. Vashi, MD, author of Selfies—Living in the Era of Filtered Photographs

Interview with Brooke Nickel and Juan Brito, MD, MSc, authors of Effect of a Change in Papillary Thyroid Cancer Terminology on Anxiety Levels and Treatment Preferences: A Randomized Crossover Trial

Interview with Rajendra S. Apte, MD PhD, and Gregory P Van Stavern, MD, authors of Association of Preclinical Alzheimer Disease With Optical Coherence Tomographic Angiography Findings

Interview with Roxana Cobo, MD, author of Superiorly Pediculated Superficial Musculoaponeurotic System Ligament Flap to Control the Supratip

Interview with Keith A. Josephs, MD, MST, MSc, author of Association of Apolipoprotein E ε4 With Transactive Response DNA-Binding Protein 43

Interview with Benjamin K. Poulose, MD MPH, author of Evaluation of Wound Photography for Remote Postoperative Assessment of Surgical Site Infections

Interview with Anthony D'Amico, MD, PhD, author of Surgery vs Radiotherapy in the Management of Biopsy Gleason Score 9-10 Prostate Cancer and the Risk of Mortality

Interview with Guido Beldi, Consultant Surgeon, author of Effectiveness of Prophylactic Intraperitoneal Mesh Implantation for Prevention of Incisional Hernia in Patients Undergoing Open Abdominal Surgery: A Randomized Clinical Trial

Interview with David A. Palma, MD, PhD, author of Measuring the Integration of Stereotactic Ablative Radiotherapy Plus Surgery for Early-Stage Non–Small Cell Lung Cancer: A Phase 2 Clinical Trial

Interview with Vinay Kumar Rathi, MD, author of Analysis of Venture Capital Investment in Therapeutic Otolaryngologic Devices, 2008-2017

Interview with Nitin Tandon, author of Analysis of Morbidity and Outcomes Associated With Use of Subdural Grids vs Stereoelectroencephalography in Patients With Intractable Epilepsy

Interview with Christopher W. Goodman, MD, author of A Clinical Overview of Off-label Use of Gabapentinoid Drugs

Interview with Quynh-Nhu Nguyen, M.D., author of Single-Fraction Stereotactic vs Conventional Multifraction Radiotherapy for Pain Relief in Patients With Predominantly Nonspine Bone Metastases: A Randomized Phase 2 Trial

Interview with Roberta W. Scherer, PhD, and Craig Formby, PhD, authors of Effect of Tinnitus Retraining Therapy vs Standard of Care on Tinnitus-Related Quality of Life: A Randomized Clinical Trial

Interview with Steven C. Cramer, MD, MMSc, author of Efficacy of Home-Based Telerehabilitation vs In-Clinic Therapy for Adults After Stroke: A Randomized Clinical Trial

Interview with Richard G. Bach, MD, author of Effect of Simvastatin-Ezetimibe Compared With Simvastatin Monotherapy After Acute Coronary Syndrome Among Patients 75 Years or Older: A Secondary Analysis of a Randomized Clinical Trial, and Antonio M. Gotto, MD DPhil, author of Intensive Lipid Lowering in Elderly Patients

Interview with Paaladinesh Thavendiranathan, MD, MSc, FRCPC, FASE, author of Assessment of Prognostic Value of Left Ventricular Global Longitudinal Strain for Early Prediction of Chemotherapy-Induced Cardiotoxicity: A Systematic Review and Meta-analysis

Interview with David J. Pinato, MD, author of Association of Prior Antibiotic Treatment With Survival and Response to Immune Checkpoint Inhibitor Therapy in Patients With Cancer

Interview with Heather Yeo, MD, MHS, and Julie Ann Sosa, MD, MA, authors of Association of Demographic and Program Factors With American Board of Surgery Qualifying and Certifying Examinations Pass Rates

Interview with Aimee S. Payne, MD, PhD, author of Factors Associated With Complete Remission After Rituximab Therapy for Pemphigus