Aim/Purpose: To prepare students with both theoretical knowledge and practical skills in the field of wireless communications. Background: Teaching wireless communications and networking is not an easy task because it involves broad subjects and abstract content. Methodology: A pedagogical method that combined lectures, labs, assignments, exams, and readings was applied in a course of wireless communications. Contribution: Five wireless networking labs, related to wireless local networks, wireless security, and wireless sensor networks, were developed for students to complete all of the required hands-on lab activities. Findings: Both development and implementation of the labs achieved a successful outcome and provided students with a very effective learning experience. Students expressed that they had a better understanding of different wireless network technologies after finishing the labs. Recommendations for Practitioners: Detailed instructional lab manuals should be developed so that students can carry out hands-on activities in a step-by-step fashion. Recommendation for Researchers: Hands-on lab exercises can not only help students understand the abstract technical terms in a meaningful way, but also provide them with hands-on learning experience in terms of wireless network configuration, implementation, and evaluation. Impact on Society: With the help of a wireless network simulator, students have successfully enhanced their practical skills and it would benefit them should they decide to pursue a career in wireless network design or implementation. Future Research: Continuous revision of the labs will be made according to the feedback from students. Based on the experience, more wireless networking labs and network issues could be studied in the future.

Location: Electronic Resource- 

IEEE / Institute of Electrical and Electronics Engineers Incorporated

IEEE / Institute of Electrical and Electronics Engineers Incorporated

A wireless communication system including a sender apparatus having a plurality of transmitting antennas that performs MIMO transmission of a plurality of data blocks; and a receiver apparatus that receives the plurality of data blocks. The sender apparatus transmits a process number via a control channel different from a data channel to the receiver apparatus, and wherein when the MIMO diversity transmission is performed, the receiver apparatus performs HARQ processing in the received data blocks based on not a process number which prevents the data blocks from competing but the received process number from the sender apparatus.

A method of generating a code sequence in a wireless communication system is disclosed. More specifically, the method includes recognizing a desired length of the code sequence, generating a code sequence having a length different from the desired length, and modifying the length of the generated code sequence to equal the desired length. Here, the step of modifying includes discarding at least one element of the generated code sequence or inserting at least one null element to the generated code sequence.

A method of interacting with data at a wireless communication device is provided. The wireless communication device has access to a first set of capabilities. Data is received at the wireless communication device via a wireless transmission. The data represents visual content that is viewable via a display device. A graphical user interface, including a delayed action selector, is provided via the display device. An input is received within a limited period of time after displaying the delayed action selector. The input is associated with a command to delay execution of an action with respect to the data until the wireless communication device has access to a second set of capabilities. The action is not supported by the first set of capabilities but is supported by the second set of capabilities. An indication of receipt of the input is provided at the wireless communication device.

Vehicle event recorder systems are arranged to be in constant communication with remote servers and administrators via mobile wireless cellular networks. Vehicle event recorders equipped with video cameras capture video and other data records of important events relating to vehicle use. These data are then transmitted over special communications networks having very high coverage space but limited bandwidth. A vehicle may be operated over very large region while maintaining continuous communications connections with a remote fixed server. As such, systems of these inventions may be characterized as including a mobile unit having: a video camera; a microprocessor; memory; an event trigger; and mobile wireless transceivers, and a fixed network portion including: mobile wireless cellular network, a protocol translation gateway, the Internet and an application-specific server.

An apparatus and method control a connection between peripheral devices in a control server of a wireless communication system providing an IP-based communication service. The method for controlling the connection between peripheral devices includes registering at least one device in a group list classified by user identification information. The method also includes, if a control node including a user identifier of the group list requests a control of any one device included in the group list, checking an IP address of the device that is requested to be controlled by the control node. The method further includes sending a control command of the control node using the IP address.

A medical device, comprising first and second components coupled via a first wireless link; and a third component coupled to the first device via a second wireless link. The device implements a communication scheme in which transmissions via the second wireless link occur during a time period that is interleaved between periods including transmissions via the first link.

A method for operating a base station in a wireless communication system in order to support a plurality of characteristics is provided. The method includes allocating resource periods for respective characteristics, transmitting system information including information on the characteristics, transmitting a reference signal with the characteristic corresponding to the relevant resource period through at least one of the resource periods, and receiving feedback information determining channel qualities for all of the characteristics.

[Problem] To provide a wireless station, a determination apparatus, a wireless communication system, a determination method, and a storage medium which can carry out appropriate interference causing control in a secondary system adaptively to an actual environment with no change in a configuration of a primary system. [Means to solve the problem] A wireless station includes a determination means to determine at least one monitoring station measuring a wireless signal, which is transmitted by the wireless station and which causes interference to another system, out of plural wireless stations of a wireless communication system to which the wireless station belongs.

A wireless communication device is configured for performing uplink transmission power control. The wireless communication device includes a processor and instructions stored in memory. The wireless communication device performs uplink transmission power control for multiple regulated frequency bands or component carriers. The wireless communication device determines a total transmission power for at least one component carrier and allocates transmission power to at least one antenna.

A method and system are provided for controlling uplink transmission power in a wireless communication system. At least one of a plurality of downlink carriers and a plurality of uplink carriers are aggregated, and the plurality of downlink carriers and the plurality of uplink carriers are mapped between a User Equipment (UE) and a network in the wireless communication system. A message relating to uplink carrier transmission power is received at the UE from the network via a downlink carrier. Uplink transmission power of one or more uplink carriers is controlled in accordance with the message and aggregation and mapping of at least one of the downlink carrier and the one or more uplink carriers.

A wireless communication system is provided that includes a wireless communication device in wireless communication with a base station and mobile stations. The wireless communication device includes first and second transceivers coupled to each other. The first transceiver is coupled to an antenna and is operable to communicate with the base station, which is also in wireless communication with other wireless communication devices. The second transceiver is coupled to another antenna and is in wireless communication with the plurality of mobile stations. The first transceiver receives a first signal from the base station intended for a one of the mobile stations, and in response the second transceiver transmits the first signal to the mobile station. The second transceiver receives a second signal from the mobile station intended for the base station, and in response the first transceiver transmits the second signal to the base station.

The invention relates to a method for configuring a mobile device capable of reproducing, for a user, multimedia content previously provided by a remote content server. The invention relates to using a client installed on said electronic device to relay authentication requests between a card, preferably complying with the provisions of the Mobile Commerce Extension standard, and an authentication server that is accessible via an access point.

A system administrator of a wireless LAN 100 manipulates a personal computer PC1 to change a WEP key. The personal computer PC1 authenticates a memory card MC as genuine under management of the system administrator. In the case of the authenticated memory card MC, changed setting information, as well as a previous WEP key before the change of the setting information, is written into the memory card MC. The system administrator then inserts this memory card MC into a memory card slot of a printer PRT1. The printer PRT1 authenticates the memory card MC as genuine under management of the system administrator. In the case of the authenticated memory card MC, the setting information is updated. This arrangement effectively relieves the user's workload in setting wireless communication devices, while ensuring the sufficiently high security.

A secret key generation apparatus and method are provided. The secret key generation apparatus includes at least one antenna, amplification/phase controllers, a transceiver, and a random signal controller. The antenna receives a wireless signal from a counterpart terminal that performs wireless communication. The amplification/phase controllers control the amplification gain and phase of the wireless signal that is received via at least one antenna. The transceiver measures the status of a wireless channel using the wireless signal having the controlled amplification gain and phase, determines parameters based on results of the measurement, and generates a secret key based on results of the determination. The random signal controller controls the amplification/phase controllers so that the amplification gain and phase are adjusted whenever the transceiver generates a secret key.

A wireless communication terminal includes a communication status measurement element for measuring communication status data representing a communication status of the self terminal at the time of wireless communications; a reference data storage element for storing respective pieces of preset reference data representing communication statuses of a terminal which can be measured at respective locations at the time of wireless communications, in association with respective pieces of location data identifying the respective locations, and a location specifying element for comparing the communication status data measured by the communication status measurement element with the respective pieces of reference data stored in the reference data storage element, and based on the comparison result, specifying a location corresponding to the location data associated with a particular piece of reference data as a location of the self terminal.

Techniques for determining time of arrivals (TOAs) of signals in a wireless communication network are described. Each cell may transmit (i) synchronization signals on a set of contiguous subcarriers in the center portion of the system bandwidth and (ii) reference signals on different sets of non-contiguous subcarriers distributed across the system bandwidth. A UE may determine TOA for a cell based on multiple signals transmitted on different sets of subcarriers. The UE may perform correlation for a first signal (e.g., a synchronization signal) from the cell to obtain first correlation results for different time offsets. The UE may perform correlation for a second signal (e.g., a reference signal) from the cell to obtain second correlation results for different time offsets. The UE may combine the first and second correlation results and may determine the TOA for the cell based on the combined correlation results.

In order to transmit a large amount of data in series at a time with a MIMO communication scheme while avoiding deterioration of decoding characteristics due to change over time by a channel matrix, a wireless communication system uses an open-loop type and a closed-loop type of MIMO communication modes in combination and switches to the open-loop MIMO communication mode in response to the information that the amount of data to be transmitted at a time has exceeded a predetermined amount of bits or a predetermined transmission time during data transmission under the closed-loop MIMO communication mode. By discontinuing useless closed-loop MIMO communication and switching to the open-loop MIMO communication mode that is better than Zero-forcing, the decoding characteristics are prevented from simply becoming deteriorated.

A wireless communication system for agricultural vehicles, in which each vehicle has a global positioning system (GPS), a multi-channel transmitter/receiver module having a limited communication range, and a signal processor connected to the transmitter/receiver module. The transmitter is controlled by the signal processor to transmit on a predetermined communication channel a signal comprising a unique vehicle identifier and a signal indicating the current positional coordinates of the vehicle. The signal processor also analyzes the signals received from other vehicles within the communication range and determines from the identifier and the positional coordinates data when another vehicle is ready to perform a joint operation with the vehicle. Prior to initiation of a joint operation, the communication system is switched to a different communication channel.

A transmission device for transmitting a signal in a wireless communication system is provided. The transmission device includes: a serial-to-parallel converter configured to convert an input serial bit stream into a parallel bit stream having three bits; and a phase rotation symbol mapper configured to map the parallel bit stream to a symbol having phase rotation characteristics, wherein when the parallel bit stream includes first to third bits, the phase rotation symbol mapper maps the second and third bits to a complex variable and sequentially maps a real number part and an imaginary number part of the complex variable to the front part and the rear part of a symbol in this order or to the rear part and the front part of the symbol in this order.

A semiconductor package device comprises a radio frequency power transistor having an output port operably coupled to a single de-coupling capacitance located within the semiconductor package device. The single de-coupling capacitance is arranged to provide both high frequency decoupling and low frequency decoupling of signals output from the radio frequency power transistor.

An apparatus for assigning a plurality of access nodes of a wireless communication network to control areas includes a processing apparatus. The processing apparatus is configured to assign each access node in the plurality of access nodes to a control area of a plurality of control areas and to determine a first control phase. The first control phase is a period of time during which the assignment of access nodes to control areas remains constant. The processing apparatus is configured to, when changing from the first control phase to a following second control phase, reassign at least a subset of access nodes which were assigned during the first control phase to a first control area to a second control area and reassign at least a subset of access nodes which were assigned during the first control phase to a third control area to the first control area.

A method for transmitting uplink (UL) data requiring low latency in a wireless communication system according to the present invention, the method performed by a user equipment comprises transmitting contention PUSCH resource block (CPRB) indication information used for identifying a particular UE and/or particular data to an eNB; transmitting UL data to the eNB through CPRB resources of a contention based PUSCH (CP) zone; and receiving a hybrid automatic retransmit request (HARQ) response with respect to the UL data from the eNB through a physical hybrid ARQ indicator channel (PHICH).

A system, apparatus and method is disclosed for multiband wireless communication. Frequency bands and/or transmission formats are identified as available within a range for wireless communication. The system evaluates signal quality metrics for each frequency band and selects a communication method based on the evaluation. Multiple frequency bands and communication methods can be utilized by the system such that a combination of licensed, unlicensed, semilicensed, and overlapped frequency bands can be simultaneously used for communication. The system monitors communications and can report link performance for adaptive control of the selected communication methods.

In one embodiment, a server of a first wireless communication network receives a wireless communication originated by a terminal of the first wireless communication network, the wireless communication containing a current geographic location of the terminal as determined by the terminal. The server may then determine acceptable communication parameters for the terminal to communicate on the first wireless communication network, e.g., based on preventing transmission by the terminal that might interfere with operation of one or more unintended receivers. The server then generates an instruction message for the terminal based on the acceptable communication parameters, and transmits the instruction message toward the terminal to cause the terminal to only continue transmitting according to acceptable communication parameters.

The present invention relates to a wireless communication system, and a method for determining a resource for device-to-device communication by a user equipment is disclosed. A method for determining a resource for device-to-device communication according to an embodiment of the present invention may comprise the steps of: receiving, from an eNode B (eNB), configuration information related to a resource pool configured for each level; selecting the resource pool of the device-to-device communication on the basis of the configuration information; and selecting a resource for the device-to-device communication in the resource pool. Herein, the resource pool may be configured to have two or more levels.

In one embodiment, a device of a first wireless communication network determines a link budget from a terminal in the first communication network to an unintended receiver for a communication from the terminal to an intended receiver in the first wireless communication network, based on the communication being configured with initial communication parameters. The device also determines whether one or more adjusted communication parameters would result in reducing a received power at the unintended receiver being below a link budget threshold, while still satisfying a receive sensitivity of the intended receiver. If so, the device causes the terminal to transmit the communication using the adjusted communication parameters. In one embodiment, the device is the terminal, and causing comprises transmitting as the terminal. In another embodiment, the device is a server of the first communication network, and causing comprises instructing the terminal to transmit the communication using the adjusted communication parameters.

According to one embodiment, a wireless communication device includes: a receiver that configured to receives a first frame; and a transmitter that configured to transmits a second frame including a first identifier and acknowledgement information on the first frame, the first identifier being extracted from a predetermined field of the first frame and being different from a source address of the first frame.

Provided are a device-to-device (D2D) operation method carried out by a terminal in an RRC connection state in a wireless communication system, and a terminal using the method. The method is characterized by: determining whether a radio resource control (RRC) connection establishment process is problematic; and transmitting a D2D signal using an exception resource, when the RRC connection establishment process is determined to be problematic.

Provided are a device-to-device (D2D) operation method carried out by a terminal in an RRC connection state in a wireless communication system, and a terminal using the method. The method is characterized by: determining whether a communication link with a base station is problematic; and transmitting a D2D signal using an exception resource, when the communication link with the base station is determined to be problematic.

Provided is a network self-healing method in which, when a link between a parent device and a child device breaks down in a wireless communication network of a cluster-tree structure in which a main communication device (referred to an access point (AP)) manages network operation, routers that are devices capable of having their child devices, and end devices that are devices incapable of having their child devices are associated with each other in a parent-child device relationship, the link is restored. When a router becomes an orphan device, the router makes network re-association in a cluster unit while maintaining synchronized operation with its child devices, and thus time, energy and signaling burden for network self-healing is largely reduced.

A system includes a voltage-controlled oscillator (VCO) to generate an output signal based on an input voltage and a multi-stage delay network to receive the output signal from the VCO. Each stage of the delay network produces a phase-shifted output signal. The system includes a multi-stage digital-to-analog converter (DAC) network, where each stage of the DAC network is associated with a corresponding stage of the delay network. Each stage of the DAC network receives the phase-shifted output signal from its corresponding stage of the delay network and generates a weighted output signal based on the received phase-shifted output signal. The DAC network combines the weighted output signal of each stage. A weighting factor for each stage of the DAC network is selected to reduce harmonic content of the combination of weighted output signals.

A wireless access control system may include a remote access wireless communications device and a lock assembly to be mounted on a door. The lock assembly may include a lock, a door position sensor, interior and exterior directional antennas, lock wireless communications circuitry, a touch sensor, and a lock controller. The lock controller may be configured to unlock the lock based upon the touch sensor, determine when the door is closed after being opened based upon the door position sensor, determine whether the remote access wireless device is in an interior or an exterior based upon the directional antennas, switch the lock to the locked position when the door is closed and when the remote access wireless device is in the interior, and not switch the lock to the locked position when the door is closed and when the remote access wireless device is in the exterior.

A wireless access control system may include a remote access wireless communications device and a lock assembly to be mounted on a door. The lock assembly may include a lock, a door position sensor, interior and exterior directional antennas, lock wireless communications circuitry, and a lock controller. The lock controller determine whether the lock is manually unlocked, determine when the door is closed after being opened based upon the door position sensor, and determine whether the remote access wireless device is in an interior or an exterior based upon the directional antennas. The lock controller may also switch the lock to the locked position when the door is closed and when the remote access wireless device is in the exterior, and not switch the lock to the locked position when the door is closed and when the remote access wireless device is in the interior.

An antenna having a passive antenna element that is integrated in a wireless communication chassis, is naturally in resonance, and is galvanically coupled to ground, and a passive indirect antenna element feed that is non-galvanically coupled to the antenna element. If the chassis is foldable, a parasitic element may be located opposite an antenna element feed when the foldable chassis is in at least one of a closed mode and a tablet mode.

A transmission apparatus includes a first metal plate including a first surface, a second surface opposite to the first surface, and a first through hole penetrating from the first surface to the second surface, the first metal plate; a first board being disposed on the first surface side of the first metal plate, the first board including a first patch antenna positioned inside the first through hole; and a second board being disposed on the second surface side of the first metal plate, the second board including a second patch antenna positioned inside the first through hole and opposed to the first patch antenna, wherein an interval between the first patch antenna and the second patch antenna is set in accordance with a distance for wireless communicating between the first patch antenna and the second patch antenna in a near field.

A waveguide device includes a first electrically conductive member having a first electrically conductive surface; a second electrically conductive member having a second electrically conductive surface which opposes the first electrically conductive surface; and a ridge-shaped waveguide member on the second electrically conductive member. The second electrically conductive member has a throughhole which splits the waveguide member into first and second ridges. The first and second ridges each have an electrically conductive end face, the end faces opposing each other via the throughhole. The opposing end faces and the throughhole together define a hollow waveguide. The hollow waveguide is connected to a first waveguide extending between the waveguide face of the first ridge and the first electrically conductive surface, and to a second waveguide extending between the waveguide face of the second ridge and the second electrically conductive surface.

A slot array antenna includes: a first conductive member having a first conductive surface and a plurality of slots therein, the slots being arrayed in a first direction and in a second direction which intersects the first direction; a second conductive member having a second conductive surface which opposes the first conductive surface; a plurality of waveguide members arrayed between the first and second conductive members along a direction which intersects the first direction, each waveguide member having an conductive waveguide face which extends along the first direction so as to oppose at least one of the slots; and an artificial magnetic conductor in a subregion which is within a region between the first and second conductive members but outside of a subregion containing the waveguide members. Neither an electric wall nor an artificial magnetic conductor exists in a space between two adjacent waveguide faces among the waveguide members.

Andrea Goldsmith, a global leader in the development of wireless systems, has been awarded the Marconi Prize, the highest honor in telecommunications research. She is the first woman to win the prize, now in its 45th year.

Exports of Kcs - Wireless Communication Machine in South Korea decreased to 807000 USD THO in April from 1208000 USD THO in March of 2020. Exports of Kcs - Wireless Communication Machine in South Korea averaged 2192558.14 USD THO from 2006 until 2020, reaching an all time high of 3981000 USD THO in October of 2008 and a record low of 807000 USD THO in April of 2020. This page includes a chart with historical data for South Korea Exports of Kcs - Wireless Communication Machine.

Online Resource

Online Resource