Have you ever thought of a handy utility to specify all necessary transmission line parameters to decide upon the stackup?   

Starting SPB 23.1, a handy feature Transmission Line Calculator, is built into Allegro X Advanced Package Designer (Allegro X APD). This feature will require either an SiP Layout license or can be accessed through SiP Layout Bundle. 

From the Analyze dropdown menu in the 23.1 Allegro X APD toolbar, you can choose Transmission Line Calculator. 

You can use this calculator to help decide constraints and stackup for laminate-based PCB or Packages. You can calculate the correct stackup material and width/spacing to meet any requirements that may be later entered in a constraint. This is truly a calculated number and not a true field solver. 

The different types of calculations that the Transmission Line Calculator can provide are Microstrip, Embedded microstrip, Stripline, CPW (Coplanar), FGCPW (frequency-dependent Coplanar), Asymmetric stripline, Coupled microstrip (Differential Pair), Coupled stripline (Differential Pair), and Dual striplines. 

This feature is important for customers relying on fabricators/spreadsheets to provide this information or need to test a quick spacing/width as per the impedance value. 

Let us know your comments on this new feature in 23.1 Allegro X APD. 

The Thumb Loop system is designed to meet the maximum wind energy potential of Michigan�s Thumb region as well as contribute to regional system reliability and facilitate wholesale market competition.

FAIRFAX - Drivers on I-66 between Route 7 (Leesburg Pike) and Route 243 (Nutley Street) should expect delays and plan to use alternate routes during...

A multiple-segment transmission line in a hard disk drive enables a wider optimization range of the slope, duration and amplitude of the transmission line overshoot (TLO) wave shape. There is a first segment with two traces for connection to the write driver circuitry, an end segment with two traces for connection to the write head and at least two intermediate segments. The number of traces in a segment is different from the number of traces in the segments to which the segment is immediately connected. There is an even number of traces in each segment and the traces in each segment are interleaved. The number of segments and the number of traces in each segment can be selected to achieve the desired impedance levels for the different segments to achieve the desired wave shape for the TLO. All of the traces on the transmission line are preferably coplanar.

A transmission line is provided in which a first portion of the transmission line is configured to be connected to a source, and a second portion of the transmission line is configured to be connected to a load. A capacitive element is coupled to the transmission line and is configured to compensate for an impedance difference between the load and at least one of the source or the transmission line, at a frequency within a frequency bandwidth of the load. A difference between an internal capacitance of the first portion of the transmission line and the second portion of the transmission line substantially matches the capacitance of the capacitive element.

An attenuation reduction control structure for high-frequency signal transmission lines of a flexible circuit board includes an impedance control layer formed on a surface of a substrate. The impedance control layer includes an attenuation reduction pattern that is arranged in an extension direction of the high-frequency signal transmission lines of the substrate and corresponds to bottom angle structures of the high-frequency signal transmission lines in order to improve attenuation of a high-frequency signal transmitted through the high-frequency signal transmission lines. An opposite surface of the substrate includes a conductive shielding layer formed thereon. The conductive shielding layer is formed with an attenuation reduction pattern corresponding to top angle structures of the high-frequency signal transmission lines.

A signal conditioning apparatus can include a coaxial cable having at least one slot formed therein. A conductive film can be applied to the coaxial cable so as to cover each slot. A device mounting surface can be formed within the slot and a protection device can be mounted on the device mounting surface. A housing consisting of one or more interlockable portions can be coupled to the coaxial cable.

Happy New Year! Have you tried the new Transmission Line Library (rfTlineLib) yet? In case you missed it, rfTlineLib was introduced in IC 6.1.6 ISR1 plus MMSIM 12.1.1 -or- MMSIM13.1. You may wonder....Why should I use the new rfTlineLib ? Well...(read more)

The US$1.6 billion Northern Pass transmission line that could tap into 1,096 MW from Canada’s largest hydropower producer, HydroQuebec, was approved Dec. 7, by a 6-0 vote of New Hampshire’s Site Evaluation Committee [SEC].
 

The Thumb Loop system is designed to meet the maximum wind energy potential of Michigan’s Thumb region as well as contribute to regional system reliability and facilitate wholesale market competition.

Silchar-Aizwal Transmission Line

Direct Current Transmission Lines

Single Circuit Transmission Line

Transmission Lines Project

Transmission Lines