The pullback in gold continues to play out since the post-election period. The precious metal is now down for a fifth straight day in what is already easily its worst weekly showing so far this year. It has more or less been a case of waiting for said pullback to reach some key technical levels on the charts. And we're just about there already in trading today.

The 100-day moving average (red line) is the key technical focus right now and that is seen at roughly $2,543. The last time gold actually had a brush against the key level was all the way back in February. And the last time that gold traded back below either that or its 200-day moving average (blue line) was all the way back in October last year.

That underscores the breathtaking momentum that has been in play for gold all through this year so far.

As such, this makes the 100-day moving average an even more important technical juncture now. A break there will not only signify a break in the bullish bias in gold. However, it could set off another wave of selling that leads to an even bigger pullback.

Traders love key levels like these and USD/JPY is a good example of that when it broke its own 100-day moving average back in late July as well. The drop there of course owed to a myriad of other factors but the technical consideration certainly exacerbated things. And it could also be the case for gold when we get there in the sessions ahead.

I'm still an advocate for gold in the bigger picture of things. However, I would say dip buyers will need to be patient to let this correction run its course before coming back in. From earlier this week: Gold pullback might prove to be timely for dip buyers

Fundamental Overview

The US CPI yesterday came in line with expectations leading to a bit of a “sell the fact” reaction in the US Dollar.

The bullish momentum picked up a bit later though as Fed’s Logan delivered a hawkish comment saying that “models show that Fed funds could be very close to neutral” basically implying a lot more cautious approach on rate cuts in 2025.

The market is viewing all of this in light of the recent US election as Trump’s policies are likely to spur growth and potentially keep inflation above target for longer, making the Fed’s job of bringing inflation back to target a bit harder.

USDJPY Technical Analysis – Daily Timeframe

On the daily chart, we can see that USDJPY finally extended the rally into new highs helped by a hawkish comment from Fed’s Logan. There’s no strong technical resistance now at least until the 160.00 handle.

If we get a pullback, the buyers will likely lean on the trendline with a defined risk below it to position for a rally into the 160.00 handle. The sellers, on the other hand, will want to see the price breaking lower to start targeting a drop back into the 152.00 support.

USDJPY Technical Analysis – 4 hour Timeframe

On the 4 hour chart, we can see that we have a minor upward trendline defining the current bullish momentum. If we get a pullback, the buyers will likely lean on it to position for new highs, while the sellers will look for a break lower to target a break below the major trendline.

USDJPY Technical Analysis – 1 hour Timeframe

On the 1 hour chart, there’s not much else we can add as from a risk management perspective, the buyers will have a better setup around the trendline, while the sellers are better to wait for a technical break lower instead of trying to catch the top. The red lines define the average daily range for today.

Upcoming Catalysts

Today we have the US PPI and the US Jobless Claims figures. Tomorrow, we conclude the week with the US Retail Sales data.

See the video below

Fundamental Overview

The US CPI yesterday came in line with expectations leading to a bit of a “sell the fact” reaction in the US Dollar.

The bullish momentum picked up a bit later though as Fed’s Logan delivered a hawkish comment saying that “models show that Fed funds could be very close to neutral” basically implying a lot more cautious approach on rate cuts in 2025.

The market is viewing all of this in light of the recent US election as Trump’s policies are likely to spur growth and potentially keep inflation above target for longer, making the Fed’s job of bringing inflation back to target a bit harder.

AUDUSD Technical Analysis – Daily Timeframe

On the daily chart, we can see that AUDUSD broke through the recent low around the 0.6537 level and extended the drop into the 0.6460 level as the US Dollar restarted its run on stronger US data. The natural target should be around the 0.6362 level.

From a risk management perspective, the sellers will have a better risk to reward setup around the trendline. The buyers, on the other hand, will want to see the price breaking higher to start targeting a rally into the top of the yearly range around the 0.69 handle.

AUDUSD Technical Analysis – 4 hour Timeframe

On the 4 hour chart, we can see that we have another minor downward trendline defining the current bearish momentum. If we were to get a pullback, the sellers will likely lean on the trendline with a defined risk above it to position for a drop into new lows. The buyers, on the other hand, will want to see the price breaking higher to start targeting a bigger pullback into the major trendline.

AUDUSD Technical Analysis – 1 hour Timeframe

On the 1 hour chart, there’s not much more we can add although we can see that we have a minor resistance zone around the 0.65 handle. If the price gets there, we can expect the sellers to pile in for move lower, while the buyers will look for a break higher. The red lines define the average daily range for today.

Upcoming Catalysts

Today we have the US PPI and the US Jobless Claims figures. Tomorrow, we conclude the week with the US Retail Sales data.

For more details please see attached the Request for pre-qualification.

Related Stories

• Life-Cycle Support and Technical Consultative Services for the OSCE Integrated Notification Application (INA) Software
• Request for pre-qualification in relation to the planned tender for the provision of Life-Cycle Support and Technical Consultative Services for the Organization for Security and Co-operation in Europe (OSCE) Conflict Prevention Centre (CPC) Integrated Not
• Selection of Microsoft-designated Large Account Reseller (LAR) for provision of Microsoft Software and Related Services

Computer Help and fast Technical support from trained technicians computer tech support fast computer technical support computer help with errors computer technical solutions

What do all those wine terms mean? Part 2

What do all those technical wine terms mean? Part 1

Dan Fallows is stepping down as Aston Martin's technical director, two-and-a-half years after taking over the role.

The paper describes the development of four learning modules that focus on technical details of how a person’s privacy might be compromised in real-world scenarios. The paper shows how students benefited from the addition of hands-on learning experiences of privacy and data protection to the existing information technology courses. These learning modules raised students’ awareness of potential breaches of privacy as a user as well as a developer. The demonstration of a privacy breach in action helped students to design, configure, and implement technical solutions to prevent privacy violations. The assessment results demonstrate the strength of the technical approach.

Aim/Purpose: This paper investigates the changing paradigms for technical skills that are needed by Data Engineers in 2018. Background: A decade ago, data engineers needed technical skills for Relational Database Management Systems (RDBMS), such as Oracle and Microsoft SQL Server. With the advent of Hadoop and NoSQL Databases in recent years, Data Engineers require new skills to support the large distributed datastores (Big Data) that currently exist. Job demand for Data Scientists and Data Engineers has increased over the last five years. Methodology: This research methodology leveraged the Pig programming language that used MapReduce software located on the Amazon Web Services (AWS) Cloud. Data was collected from 100 Indeed.com job advertisements during July of 2017 and then was uploaded to the AWS Cloud. Using MapReduce, phrases/words were counted and then sorted. The sorted phrase / word counts were then leveraged to create the list of the 20 top skills needed by a Data Engineer based on the job advertisements. This list was compared to the 20 top skills for a Data Engineer presented by Stitch that surveyed 6,500 Data Engineers in 2016. Contribution: This paper presents a list of the 20 top technical skills required by a Data Engineer.

Aim/Purpose: A vital business activity within socio-technical enterprises is tacit knowledge externalization, which elicits and explicates tacit knowledge of enterprise employees as external knowledge. The aim of this paper is to integrate diverse aspects of externalization through the Enterprise Ontology model. Background: Across two decades, researchers have explored various aspects of tacit knowledge externalization. However, from the existing works, it is revealed that there is no uniform representation of the externalization process, which has resulted in divergent and contradictory interpretations across the literature. Methodology : The Enterprise Ontology model is constructed step-wise through the conceptual and measurement views. While the conceptual view encompasses three patterns that model the externalization process, the measurement view employs certainty-factor model to empirically measure the outcome of the externalization process. Contribution: The paper contributes towards knowledge management literature in two ways. The first contribution is the Enterprise Ontology model that integrates diverse aspects of externalization. The second contribution is a Web application that validates the model through a case study in banking. Findings: The findings show that the Enterprise Ontology model and the patterns are pragmatic in externalizing the tacit knowledge of experts in a problem-solving scenario within a banking enterprise. Recommendations for Practitioners : Consider the diverse aspects (what, where, when, why, and how) during the tacit knowledge externalization process. Future Research: To extend the Enterprise Ontology model to include externalization from partially automated enterprise systems.

Aim/Purpose: This explanatory study aimed to determine the mediating role of ERP in the relation between the effect of a socio-technical approach and decision-making environment, and firms’ sustainable performance. Background: Although earlier studies have discussed the critical success factors of the failure or success of an ERP system and the extent to which it achieves its desired objectives, the current study focused on the significant impact of socio-technical elements and decision-making environment on the success of the ERP system (i.e., sustainable performance). In addition, the lack of research on ERP as a mediator in the above relationship motivated this study to bridge the literature gap. Methodology: The data was collected using questionnaires distributed to 233 randomly selected employees of three multinational companies (BP, LUKOIL, and Eni) operating in Iraq. The structural equation modeling was employed to test the hypothesized relationships. Contribution: The study contributes to the literature by examining the mediating role of the ERP system in the relationship between socio-technical elements and the decision-making environment, as well as, the moderating role of organizational culture in the relationship between socio-technical elements and ERP systems. Findings: The results showed that ERP is a significant mediator between the linkage of socio-technical elements and the decision-making environment while organizational culture has an insignificant moderating role in the relationship between socio-technical elements and ERP systems. Recommendations for Practitioners: In a developing country like Iraq, there is a need to implement ERP to achieve better sustainable performance through change management and organizational development that ultimately work towards enhancing individual capabilities, knowledge, and training. Recommendation for Researchers: The researchers are recommended to conduct an in-depth study of the phenomenon based on theoretical and empirical grounds, particularly in light of the relationship of socio-technical elements and decision-making environments. Impact on Society: This study provides a reference for organizations with similar cultural backgrounds in using ERP systems to minimize pollution in Iraqi context. Future Research: A more in-depth study can be performed using a bigger sample, which not only includes the oil industry but also the other industries.

This paper identifies areas in the design science research (DSR) subfield of the information systems (IS) discipline where a more detailed consideration of practitioner audiences of socio-technical design artifacts could improve current IS DSR research practice and proposes an initial conceptualization of these audiences. The consequences of not considering artifact audiences are identified through a critical appraisal of the current informing science lenses in the IS DSR literature. There are specific shortcomings in four areas: 1) treating practice stakeholders as a too homogeneous group, 2) not explicitly distinguishing between social and technical parts of socio-technical artifacts, 3) neglecting implications of the artifact abstraction level, and 4) a lack of explicit consideration of a dynamic or evolutionary fitness perspective of socio-technical artifacts. The findings not only pave the way for future research to further improve the conceptualization of artifact audiences, in order to improve the informing power – and thus, impact on practice and research relevance – of IS DSR projects; they can also help to bridge the theory-practice gap in other disciplines (e.g. computer science, engineering, or policy-oriented sociology) that seek to produce social and/or technical artifacts of practical relevance.

Aim/Purpose: The Covid-19 pandemic has created many adverse effects. It overloads the healthcare system, causes deaths, and angers some at anti-covid restrictions. This study examines the feasibility of using technical and technological ideas to overcome these effects. The solution is based on new knowledge about the virus, its nature, formation, and activation in the environment. Background: The rapid spread of a new coronavirus infection is taking place against the background of a lack of time required to create new treatment scenarios for the disease, development, production, and vaccine safety research. In such a situation, it became necessary to gain this time for organizing and conducting events that could reduce the burden on the healthcare system. Methodology: The science that studies the morphology, physiology, genetics, ecology, and evolution of viruses is virology. The modern development of virology is moving towards a more accurate and comprehensive description of the mechanisms of interaction of viruses with the host organism. This contributed to the emergence of genomics, transcriptomics, proteomics, and immunomics. However, in virology, there is no particular discipline that sets itself three fundamental goals: to substantiate a single concept of the emergence of viruses; to study the natural mechanisms of formation of virus molecules in the environment; to describe the natural mechanisms of activation of certain viruses in the environment that cause viral pandemics. As a result, there are many articles among the published scientific articles on viruses dealing with the mechanisms of interaction of viruses with the host organism. However, there are no articles on the natural mechanisms of formation and activation of certain viruses in the environment. In the absence of such specialized articles, we were forced to use the method of systems transdisciplinary generalization of disciplinary knowledge to achieve our article’s purpose. Generalization created new knowledge about the nature of viruses, about the mechanisms of their formation and activation in the environment and cells of biological organisms. It is logical to assume that to synchronize the state of biological objects of all functional ensembles on the planet, it is necessary to create and activate appropriate “technological tools.” We have suggested and proved that RNA viruses play the role of such tools. Piezoelectricity activates viruses. It occurs during the compression and stretching of sedimentary rocks and bases of continental plates in different territories. Contribution: The systems transdisciplinary generalization of the knowledge of scientific disciplines made it possible to edit the concept of viruses, to eliminate stereotypes that arose due to the use of unsuccessful analogies. As a result of this generalization, it was possible to prove that viruses are not intracellular parasites. The virus is a “technological tool” of the planetary organizing component. This “tool” aims to correct the genetic programs of organisms of all functional ensembles (plants, animals, people), which will maintain the state of organisms and the parameters of their metabolism in changing environmental conditions. Findings: The viruses that triggered pandemics in the 20th century and early 21st century are RNA viruses. RNA molecules play the role of “technological tools” that the planetary organizing component uses to carry out short-term and long-term adjustments and constant support of the genetic programs of biological organisms. Therefore, in such a situation, it is advisable to talk not about the fight against the virus but only about eliminating the negative manifestations of the Covid-19 pandemic: reducing the number of people in need of emergency hospitalization, eliminating cases of the acute course of the disease and deaths. It is proposed to use certain technical and technological ideas and solutions to eliminate these negative manifestations. Recommendation for Researchers: This paper recommends that researchers use new interdisciplinary and transdisciplinary approaches. They challenge assumptions and conclusions about the nature of viruses, and the mechanisms of their formation and activation in the environment can initiate. Such new research might describe the mechanisms that form and activate viruses in the environment and the body’s cells. They also might provide practical use of this knowledge to eliminate the multiple speculations and fears that arise against the background of reports of the likely appearance of more deadly viruses and viral infections. Future Research: The results of a systems transdisciplinary generalization of disciplinary knowledge about the nature and purpose of viruses are essential for expanding the horizon of the scientific worldview. Future fundamental research on the mechanisms of objective organizing constituents, a general description given in this article, will contribute to a deeper understanding of chemical and biological evolution mechanisms in which modern humanity is involved. In due time, such an understanding will allow a new look at the existing scenarios of the world socio-economic order, explore and describe new principles of sustainable development of society.

To capture the complexity and diversity of systems with both technical and social features, modelling methods are needed that similarly provide various tools and concepts. Study of developed methods shows that despite all of their advantages and strengths, there is a need for a method that with a holistic approach integrates perspectives, strengths and tools of the developed methods and models with different aspects of socio-technical systems. The main aim of the current study is to design a method for modelling complex socio-technical systems. To achieve this goal, it is necessary to design a method that is based on creativity and existing knowledge base. Therefore, design science research is used as a research strategy to design proposed method. For the first time, design science research in the field of operations research has been used to design a modelling method. This study also presents new tools and concepts for modelling socio-technical systems.

Among web users, there is probably no one who’s never heard about the Intense theme. And all because it is a #1 best-selling website template on the TemplateMonster marketplace. Multipurpose, developed with users in mind, and up-to-date — these …

The post Intense Multipurpose Website Template: Technical Overview appeared first on Template Monster Help.

Issue 72 of the CBD Technical Series is now out focusing on "EARTH OBSERVATION FOR BIODIVERSITY MONITORING : A review of current approaches and future opportunities for tracking progress towards the Aichi Biodiversity Targets". The issue shows how earth observation technologies can and should fit into systems for biodiversity monitoring, as well as demonstrates how these approaches could further improve relevant indicators for the Aichi Biodiversity Targets. It illustrates a clear track from observations done by remote sensing platforms through Essential Biodiversity Variables to biodiversity indicators and ultimately to the assessment of progress towards the Aichi Biodiversity Targets and ultimately in support of evidence-based decision making. EU BON is also featured in this report.

The goal of the CBD Technical Series is to contribute to the dissemination of up-to-date and accurate information on selected topics that are important for the conservation of biological diversity, the sustainable use of its components and the equitable sharing of its benefits. A large and growing body of evidence has clearly established the need to disseminate synthesis publications relevant to CBD objectives and selected reports presented at CBD meetings.

The CBD Technical Series is intended to:

• Foster scientific and technical cooperation;
• Improve communication between the Convention and the scientific community;
• Increase awareness of current biodiversity-related problems and concerns; and
• Facilitate widespread and effective use of the growing body of scientific and technical information on conserving and using biological diversity.

The full report is available here.

Target group: programmers, developers and system engineers. The workshop is open to anybody who might be interested to learn more about the DINA-system.

Preliminary agenda:

• Presentations from all DINA-partners
• APIs, service oriented architecture and road map for distributed development, guidelines and principles on how to build a module and join the DINA-system
• Case studies
• Delivery options: creating installations from hosted environment, virtual machines down to code.

A detailed program will be available by the end of August 2014.

There will be a SETF-meeting for DINA consortium members on the 15th of September.

Welcome to register for the workshop here:

DINA - Technical Workshop 16-18 September, Stockholm

The workshop is an activity within WP 1 Task 1.4

An EU-BON Workshop focusing on the DINA system - "Alpha version of mobilization system – the DINA-system MS141" - was hosted the 16. to 18. September 2014 by the Swedish Museum of Natural History in Stockholm.

Target group: programmers, developers and system engineers, but the workshop was open to anybody who was interested to learn more about the DINA-system.

Content included:

• Presentations from all DINA-partners
• APIs, service oriented architecture and road map for distributed development, guidelines and principles on how to build a module and join the DINA-system
• Case studies
• Delivery options: creating installations from hosted environment, virtual machines down to source code

For program, particpants list, presentations etc please vist the DINA wiki

Target group: programmers, developers and system engineers. The workshop is also open to anybody who might be interested to learn more about the DINA-system.

Preliminary agenda:

• Presentations from all DINA-partners
• APIs, service oriented architecture and road map for distributed development guidelines and principles on how to build a module and join the DINA-system
• Case studies
• Delivery options: creating installations from hosted environment, virtual machines down to code.

Workshop Program.

There will be a SETF-meeting for DINA consortium members on the 15th of September.

Welcome to register for the workshop here:

DINA - Technical Workshop 16-18 September, Stockholm

The workshop is an activity within WP 1 Task 1.4

SBSTTA 19 - Nineteenth meeting of the Subsidiary Body on Scientific, Technical and Technological Advice will take place from 2 to 5 November 2015 in Montreal, Canada.

DINA Technical Comittee will have a workshop in Copenhagen with updates on ongoing module developments and coding sessions.

http://www.dina-project.net/wiki/Physical_TC_meeting_2015

The 4th EU BON roundtable will take place on Thursday, 17 November 2016 at the premises of the Museum fuer Naturkunde in Berlin with the motto "Pathways to sustainability for EU BONs network of collaborators and technical infrastructure".  

One of the key questions will be how to achieve sustainability for the many different products of EU BON, such as tools, software, models and infrastructure after the project ends. It should be discussed how a European Biodiversity Observation Network and its essential components could be sustained after the project will end in May 2017, by which institutions or networks and how the products can be used in the best way for European policy and research needs.  

IMCD, a leading distributor, formulator and solutions provider of speciality chemicals and ingredients, announced June 1 the relocation and opening of the new IMCD Coatings & Construction Laboratory serving customers throughout North America.

The Rainscreen Association in North America announced the launch of the RAiNA Awards, an annual program celebrating outstanding achievements in rainscreen design, innovation and construction. The awards aim to recognize projects that exemplify the highest standards of excellence, technical performance, sustainability and aesthetic design in rainscreen systems across North America.

Technical Glass Products has a new architectural services manager role to support glazing design along the East Coast of the U.S. and in the Ontario and Quebec territories of Canada.

EIMA announced the release of a series of technical bulletins, meticulously crafted by the members of its technical and research advocacy working group. The bulletins are a testament to the commitment and expertise of EIMA in advancing the knowledge and application of Exterior Insulation and Finish Systems.

Several training and education opportunities took place during the Fenestration and Glazing Industry Alliance’s 2024 Fall Conference in Minneapolis, including an informative session on mockup testing in construction, a primer on corrosion, and an educational, hands-on workshop demonstrating proper application of materials common in fenestration installation, as presented by the FGIA Wall Interface Council.

Led by Daniel Sochalski, director of national training, and national sales trainers Jim Pascale and Tim O’Brien, Speco PhD will offer tailored training sessions virtually, in-person, and at major industry events/trade shows.

Camden Door Controls has released two new publications to support its line of industry-leading locking products, including maglocks, strikes, and cabinet locks.

Farbest Brands has hired Joe Rios as Technical Sales Manager, the latest in a slew of strategic organizational changes to support investment in new product lines and ingredients, specifically in hydrocolloids.

The Floor Covering Education Foundation (FCEF), in partnership with the Alabama Community College System (ACCS) Innovation Center, Drake State Community College, and the Industry Task Force, announced the completion of its first pilot cohort for the Flooring Installation Technicians course.

The National Wood Flooring Association (NWFA) has hired Kjell Nymark as its technical advisor.

The Carpet and Rug Institute (CRI) announced the retirement of Richard Turner, director of technical services, and the appointment of Darrell Hagan as the new director of technical and programs. 

Perhaps you've heard of us, perhaps not. Look at your smartphone, digital camera, smart TV, gaming console, or your saved images in the cloud. Guess what, you’ve already got an Arm-based device or are connected to one!

Get a buzz out of learning new technologies? Do you enjoy writing? Arm’s Information Developers and Technical writers work with exciting and results-oriented projects that really impact the technological world. The fresh ideas of undergraduates and people early in their careers can help shape these technologies. People at Arm are diverse, dedicated, and innovative. We'd like you to bring your passion and curiosity to our company, and share your ideas! In return, we'll provide training, coaching, and a challenging environment to start your career. You'll be exposed to technologies that will be the foundation for innovative products for years to come! At Arm, we encourage our undergraduates to strengthen their proficiencies while advancing their education. You can build a career as unique as you are, with your team mates and leaders right there supporting you, even when the world throws us curveballs. 

Arm Information Developers and Technical Writers create different types of technical content, including web content, specifications, tutorials, and multimedia. This content helps our customers and ecosystems to design and develop with Arm products and solutions.

Arm has a range of vacancies for enthusiastic undergraduates with ambitions in writing and technology. You will be part of a larger community of writers, who can guide, train, and give suggestions. We nurture our people, we provide one-to-ones, and a collaborative and friendly working environment. Our leaders are open to sharing their career experiences and also giving feedback for your development.

BGS joins new initiative supporting technical career paths  British Geological Survey

Focused attention by world leaders is needed to address the substantial challenges posed by disposal of spent nuclear fuel from reactors and high-level radioactive waste from processing such fuel for military or energy purposes.