StarWind, Intel, Mellanox, and Supermicro present the industry's fastest hyperconverged cluster built to demonstrate outstanding hardware utilization efficiency.

Oakland, CA — California’s Office of Administrative Law on March 9 approved a workplace health and safety standard for the state’s hospitality workers, completing a multiyear push by hospitality workers union UNITE HERE.

Washington – OSHA issued a correction and technical amendment to its Hazard Communication Standard to change references of “Material Safety Data Sheets” to the updated “Safety Data Sheets.”

Chattanooga, TN — Long-term work disability claims for musculoskeletal issues have climbed 40% overall and 62% among men since 2010, and are especially prevalent among workers in occupations that require heavy lifting, repetitive motion or prolonged sitting, a recent analysis from insurance company Unum shows.

Melbourne, Australia — Musculoskeletal disorders cost people around the world nearly 140 million years lost to ill-health, disability or early death, results a recent study out of Australia and Iran indicate.

Silver Spring, MD — Employers in the construction industry need to promote “effective, non-opioid pain-management methods” for injured workers, a nonprofit safety group is saying after two of its recent studies found construction workers with musculoskeletal disorders are three times more likely than their co-workers to use prescription opioids.

Itasca, IL — In an effort to help employers and workers mitigate the risk of musculoskeletal disorders and develop techniques to prevent these injuries, the National Safety Council is teaming up with Amazon to establish new research, technology and processes as part of a five-year partnership to combat a leading cause of workplace injuries.

Washington — Age-specific efforts aimed at preventing musculoskeletal disorders related to overexertion – a significant cause of MSDs among construction workers in the United States – could help address the problem, researchers from NIOSH say.

Bilbao, Spain — Excessive workloads, conflicting demands and a lack of support from management are some of the psychosocial factors that can contribute to the development of musculoskeletal disorders in the workplace, according to a literature review conducted by the European Agency for Safety and Health at Work.

Washington — In a push to reduce work-related musculoskeletal disorders, the National Safety Council is calling on employers across all industries to sign a pledge to improve workplace safety, reduce MSD risk and enhance worker well-being.

We discuss content from the July issue of Safety+Health, including the latest news about musculoskeletal injuries. Also, National Safety Council Principal Consultant Rich Fairfax joins the podcast to discuss what safety pros should know about recent changes to OSHA’s Hazard Communication Standard.

Washington – NIOSH has released a publication intended to help reduce the risk of musculoskeletal injuries among grocery store employees and other retail workers.

Silver Spring, MD — The rate of nonfatal, work-related musculoskeletal disorders requiring days away from work in the construction industry has continued to decline, while the median DAFW for such injuries remains on the rise, according to a recent report from the Center for Construction Research and Training – also known as CPWR.

Bilbao, Spain — A new virtual toolkit from the European Agency for Safety and Health at Work, also known as EU-OSHA, consists of a series of videos aimed at helping workers understand their risk of musculoskeletal disorders and how to prevent them.

Itasca, IL — A new white paper from the National Safety Council details effective interventions to help prevent or reduce work-related musculoskeletal disorders.

Itasca, IL — In another effort to help organizations prevent work-related musculoskeletal disorders, the National Safety Council’s MSD Solutions Lab conducted its inaugural MSD Pledge: Small Business Summit on Oct. 13.

In Episode 33, the S+H editorial team dives into the November issue’s feature story on OSHA’s Multi-Employer Citation Policy.

Itasca, IL — The National Safety Council has announced two new grant programs to encourage development of safety solutions targeting work-related musculoskeletal disorders.

Itasca, IL — Reducing work-related musculoskeletal disorders by 25% by 2025 is a goal that requires commitment.

Itasca, IL — The National Safety Council has awarded $274,000 in grants to nine organizations in an effort to advance new safety technologies aimed at reducing work-related musculoskeletal disorders.

Genoa, Italy — A new video from the Italian Institute of Technology showcases potential uses of collaborative robots, or cobots, to help prevent work-related musculoskeletal disorders.

Itasca, IL — Taking simple steps before work begins can help curb job-related musculoskeletal disorders.

Washington — “If it isn’t equitable, it’s not ergonomic.” Paige DeBaylo, research manager at the National Safety Council MSD Solutions Lab, offered that insight during a July 11 webinar discussing a recently published NSC report.

Philadelphia – OSHA has launched a campaign that aims to protect health care workers from musculoskeletal disorders, the leading cause of injuries for those workers.

Waterloo, Ontario — Overhead work is associated with shoulder injuries. New resources from the Center of Research Expertise for the Prevention of Musculoskeletal Disorders, also known as CRE-MSD, are intended to help employers and workers address MSD risks caused by overhead work.

Work-related musculoskeletal disorders – also referred to as repetitive motion or repetitive strain injuries – are a group of painful conditions that affect the muscles, tendons and nerves. According to the Canadian Center for Occupational Health and Safety, workers can develop an MSD from bending, gripping, straightening, holding, twisting, or reaching with their arms and hands.

Bilbao, Spain — Promoting good musculoskeletal health among remote workers and their employers is the goal of a new fact sheet from the European Agency for Safety and Health at Work, also known as EU-OSHA.

Washington — An OSHA standard on safe patient handling and mobility could reduce musculoskeletal disorders among health care workers, the Human Factors and Ergonomics Society says in a new policy statement.

Edmonton, Alberta — A recent study of workers’ compensation claims filed by workers in long-term care facilities shows that the majority involved care aides and musculoskeletal injuries.

Washington — Work organization, job stress and other non-physical risk factors “cannot be ignored” when assessing the likelihood of work-related musculoskeletal disorders, according to a new white paper from the National Safety Council.

Washington — Musculoskeletal disorders are overwhelmingly the No. 1 cause of injuries among warehousing and “last-mile delivery” workers, according to a Government Accountability Office report released Oct. 8.

ESDS said its client base includes the Software Technology Parks of India (STPI), SIDBI Bank, Union Bank of India, State Bank of India Capital, and over 400 cooperative banks, as well as, the Embassy Group, Vadilal, and Unibic.

The ASDS Annual Conference is the Premier Dermatological Meeting of the Year

Leading Dermatology Billing Firm to Showcase Services and Connect with Industry Professionals

On Wednesday 31st March Ivan Bennett, Design Manger for London Buses, delivered a presentation on the design and development of Bus infrastructure furniture and products at Transport for London’s offices in Southwark. This article gives and overview of the evening and highlights some of the key topics discussed.

Background Information

As part of Transport for London (TfL), London Buses is responsible for securing the provision of bus services throughout Greater London in a safe, efficient manner, while encouraging the use of buses and public transport. Surface Transport Infrastructure Development are responsible for the design and development, specification, installation and maintenance of the supporting infrastructure within Greater London. As the main point of contact with passengers, bus stops in London currently total over 19,000.

Introduction

Mike Wolff, Chairman of the SDS, introduced Ivan and highlighted that the society often discuss the graphic design and strategy of wayfinding systems, but talk less about the design of products. That in mind he was very keen to get the event underway.

Ivan began his presentation by putting the scale of the London Bus project into perspective. Every weekday over 6,500 scheduled buses carry around 6.25 million passengers on over 700 different routes, amounting to over 1.7 billion journeys a year. He was also keen to point out that the first use of the iconic roundel was the 19th-century symbol of the London General Omnibus Company; its usage on the Underground came later.

History of London Buses

Illustrations of old shelters showed how little the identity had changed over the years and demonstrated how forward thinking London were in a period hung up on embellishment. Ivan emphasised the importance and influence of Frank Pick, head of the London Underground in the 1910s and 1920s and of the newly merged London Transport in the 1930s. Frank was instrumental in establishing the world’s most progressive public transport system and an exemplar of design management. Ivan went on to explain how Frank’s vision influenced the design of London bus products, including those we see on the streets today.

Creating Successful Products

TfL are a well known brand and the legacy of their products has a huge impact on defining the city. Their products and use of materials also help define the values of the system. Ivan identified his three intrinsic factors for creating successful products:

• Aesthetics
• Appropriateness
• Economics
• Even in the early 19th century, London Transport realised the importance of these values.

(quote: “The test of the goodness of a thing is its fitness for use. If it fails on this first test, no amount of ornamentation or finish will make it better; it will only become more expensive and more foolish.” – Frank Pick)

It was clear that Ivan and his team design products with a clear focus on ‘Appropriateness’. They adopt a cradle to grave approach to design and Ivan listed key considerations in their design process:

• Who will use the product?
• What will the product be used for?
• How long does the product need to last?
• What possible impact does the product need to withstand? (vehicles, pedestrians, weather)
• How often will the product need to be updated?
• How will the product be maintained?
  -In particular when looking at materials:

Do the individual materials proposed work together?

• Are the materials used sustainable?
• Do the materials work within the surrounding environment?
• What is the life span of individual materials?
• How will materials be disposed of at the end of the products life?

Current Product

Using a full scale replica of a bus stand located at the front of the room, Ivan described in detail the design of the current product used at bus stops.

Many of the components are easily switchable. Ivan demonstrated how using a tiling system, bus stop numbers could be changed and moved almost like pieces of a jigsaw puzzle.

Examples of timetables, route maps and network maps helped show how London Buses have simplified information to make it easier for bus stop users to answer three key questions:

• Where am I now?
• How do I get from A to B
• How will I know when I get there?

A good example of this simplification of information is the timetable, where individual times have been omitted and instead only first and last buses are listed along with the general frequency of buses throughout the day.

Example: Transport for London Journey Planner.

Where other systems fail

One reason other systems have failed is the lack of continuity. London bus stops extend beyond central areas and cover all routes in Greater London. Ivan indicated that passengers do not just want information about where they are travelling from, but when they get there, they need the same consistently presented information. People need information near their homes and local areas, not just in the centre of the city.

Ivan also pointed out that many systems fail because they do not own their products. London Buses design and build their products and own the intellectual property rights. This allows TfL the freedom to change manufacturers without having to reinvent their products. Continuity of the brand is maintained and London Buses can continually work on evolving their products.

Questions and Answers

The session concluded with a questions and answers forum. Unsurprisingly many of the questions focussed on manufacturing methods and material choices, but several of the questions were centred around brand identity and the roundel. A debate began on the use of the roundel and whether overuse was diluting its visual impact, a subject I am sure we all could have continued discussing at length, but time was pushing on and Mike sadly had to draw the session to a close.

Conclusion

I have been to several events organised by the SDS, but this was one of my favourites. The presentation was filled with facts, history, illustrations and physical examples. Ivan is obviously very knowledgeable on the subject and passionate about his job and this came through in his presentation.

I would like to thank Ivan, Mike, Michelle and the SDS for another great event.

For more information on the SDS visit: The Sign Design Society

Author Bio:
Hayley graduated in 2007 with a first class degree in Visual Communication. She now lives and works in London as a Wayfinding Designer for a large architectural practice. Her key projects to date include developing signage and information graphics for both Dublin and Rome Airport. Hayley’s thoughts and inspirations can be found in her regular tweets as Wayfinding_UK.

read more

read more

Oct. 24, 2024 — The San Diego Supercomputer Center (SDSC), part of the School of Computing, Information and Data Sciences at UC San Diego, has been leading the Open Storage Network (OSN) program for years, and along […]

The post SDSC Leads Expansion of Open Storage Network to More Campus Computing Sites appeared first on HPCwire.

The farmers’ protests have become a critical point of contention, sparking diverse opinions across the nation

Canadian government discontinues SDS visa, impacting Indian students with longer processing times, higher fees, and complex procedures.

If left unpatched, a firmware flaw in some enterprise-class solid-state drives could make data on them unrecoverable as early as this fall

The post HPE issues fix to stop some SSDs from self‑destructing appeared first on WeLiveSecurity

read more

read more

HPE learned of the defect from the SSDs' unnamed manufacturer, and dozen of different products, including individual memory drives to server models, suffer from the bug.

A 64-core/128-thread CPU. A new challenger in laptop processors. A feisty new fighter in midrange graphics. These three things have three letters in common. Plus: SSDs take on stunning new capacities, speeds, and looks.