science and technology

Smart functionalized phosphonic acid based copolymers: new structures for old purposes

Polym. Chem., 2020, Advance Article
DOI: 10.1039/D0PY00337A, Paper
Xavier Solimando, Yohann Catel, Norbert Moszner, Jean-Jacques Robin, Sophie Monge
Innovative well-defined acidic photopolymerizable phosphorus-based copolymers were prepared and tested in well-known dental applications to improve the adhesion of dental self-etch adhesives (SEAs).
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

A general method to greatly enhance ultrasound-responsiveness for common polymeric assemblies

Polym. Chem., 2020, Advance Article
DOI: 10.1039/D0PY00254B, Paper
Jinkang Dou, Ruiqi Yang, Kun Du, Li Jiang, Xiayun Huang, Daoyong Chen
Ultrasound-controlled drug release is a very promising technique for controlled drug delivery due to the unique advantages of ultrasound as the stimulus.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

Pillar[5]arene-based self-assembled linear supramolecular polymer driven by guest halogen–halogen interactions in solid and solution states

Polym. Chem., 2020, Advance Article
DOI: 10.1039/D0PY00327A, Paper
Talal F. Al-Azemi, Mickey Vinodh
A pillar[5]arene-based linear supramolecular polymer mediated by guest halogen–halogen interactions (C–Br⋯Br–C) was studied in both the solution and solid states.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

Hydrogen-bonded supramolecular micelle-mediated drug delivery enhances the efficacy and safety of cancer chemotherapy

Polym. Chem., 2020, 11,2791-2798
DOI: 10.1039/D0PY00082E, Paper
Chih-Chia Cheng, Ya-Ting Sun, Ai-Wei Lee, Shan-You Huang, Wen-Lu Fan, Yu-Hsuan Chiao, Chih-Wei Chiu, Juin-Yih Lai
Multiple hydrogen-bonded supramolecular polymers tend to form stable spherical micelles with oppositely charged anticancer drugs in biological environments, which improves cellular drug uptake and more effectively induces apoptosis in cancer cells.
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

Temporal control of RAFT polymerization via magnetic catalysis

Polym. Chem., 2020, 11,2838-2846
DOI: 10.1039/D0PY00220H, Paper
Amin Reyhani, Omid Mazaheri, Masood S. Alivand, Kathryn A. Mumford, Greg Qiao
Magnetic core–shell structured Fe3O4@Fe(II)–MOF nanoparticles have enabled the temporal control of RAFT polymerization via an “on–off” process.
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

Polymerization of dopamine accompanying its coupling to induce self-assembly of block copolymer and application in drug delivery

Polym. Chem., 2020, 11,2811-2821
DOI: 10.1039/D0PY00085J, Paper
Yudian Qiu, Zongyuan Zhu, Yalei Miao, Panke Zhang, Xu Jia, Zhongyi Liu, Xubo Zhao
The polymerization of dopamine and its coupling occur in succession, which synergistically induces the self-assembly of block copolymer to yield ordered structures, including micelles and vesicles.
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

Mussel-inspired coordination functional polymer brushes-decorated rGO-stabilized silver nanoparticles composite for antibacterial application

Polym. Chem., 2020, 11,2822-2830
DOI: 10.1039/D0PY00180E, Paper
Shengnan Zhou, Haixun Ji, Linjing Liu, Sijia Feng, Yuqin Fu, Yu Yang, Changli Lü
A catechol-terminated coordination functional polymer-modified rGO supported AgNPs composite was fabricated. Grafted polymer brushes improve the material's hydrophilicity and dispersion stability of AgNPs on rGO, enhancing antibacterial activity.
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

Simple improvements to Gilch synthesis and molecular weight modulation of MEH-PPV

Polym. Chem., 2020, 11,2831-2837
DOI: 10.1039/D0PY00072H, Paper
Riley O'shea, Wallace W. H. Wong
The solvent and temperature used in the Gilch synthesis of poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV) were varied to achieve an improved set of reaction conditions.
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

Vesicular assemblies of thermoresponsive amphiphilic polypeptide copolymers for guest encapsulation and release

Polym. Chem., 2020, 11,2889-2903
DOI: 10.1039/D0PY00135J, Paper
Mahammad Anas, Somdeb Jana, Tarun K. Mandal
Thermoresponsive amphiphilic polypeptide copolymers are synthesized via different polymerization techniques for their self-assembly into vesicular aggregates for guest encapsulation and release.
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

Self-supported rhodium catalysts based on a microporous metal–organic framework for polymerization of phenylacetylene and its derivatives

Polym. Chem., 2020, 11,2904-2913
DOI: 10.1039/D0PY00170H, Paper
Li Zhang, Qingbin Cao, Fei Gao, Yuping Dong, Xiaofang Li
Highly efficient, cis-selective, stable, recyclable and reusable heterogeneous single-site MOF-supported rhodium catalysts polymerize PA and its derivatives, producing cis-transoidal PPAs and their functional derivatives having a helical configuration or AIE properties.
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

Synthesis of a side-chain hole transporting polymer through Mitsunobu post-functionalization for efficient inverted perovskite solar cells

Polym. Chem., 2020, 11,2883-2888
DOI: 10.1039/D0PY00134A, Paper
Liuyuan Lan, Xiang Deng, Jie Zhang, Jingdong Luo, Alex K.-Y. Jen
Mitsunobu post-functionalization was utilized to construct a new efficient dopant-free side-chain hole transporting polymer for inverted perovskite solar cells, exhibiting a power conversion efficiency of 17.75% and a high fill factor over 81%.
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

Synthesis of biscarboxylic acid functionalised EDTA mimicking polymers and their ability to form Zr(IV) chelation mediated nanostructures

Polym. Chem., 2020, 11,2799-2810
DOI: 10.1039/D0PY00304B, Paper
Meike N. Leiske, Julia A. Walker, Aadarash Zia, Nicholas L. Fletcher, Kristofer J. Thurecht, Thomas P. Davis, Kristian Kempe
We present a new biscarboxylic acid acrylate, which is used for the synthesis of double hydrophilic EDTA-mimicking block copolymers capable of self-assembly upon zirconium complexation.
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

Well-controlled polymerization of tri-vinyl dynamic covalent boroxine monomer: one dynamic covalent boroxine moiety toward a tunable penta-responsive polymer

Polym. Chem., 2020, 11,2914-2922
DOI: 10.1039/D0PY00401D, Paper
Shun-Shun Li, Xin-Hu Lv, Xiao-Li Sun, Wen-Ming Wan, Hongli Bao
Attributed to dynamic characteristics of dynamic covalent boroxine, well-controlled polymerization of tri-vinyl monomer and molecular design of penta-responsive polymer with only one functional moiety are achieved.
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

A high performance phenyl-free LED photoinitiator for cationic or hybrid photopolymerization and its application in LED cationic 3D printing

Polym. Chem., 2020, 11,2855-2863
DOI: 10.1039/D0PY00142B, Paper
Liqun Tang, Jun Nie, Xiaoqun Zhu
In this work, a high performance LED photoinitiator, 1,3-bis(1-methyl-1H-pyrrol-2-yl)prop-2-en-1-one (BMO), without a benzene ring was synthesized through a one-step aldehyde–ketone condensation reaction.
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

Tuning polymer properties of non-covalent crosslinked PDMS by varying supramolecular interaction strength

Polym. Chem., 2020, 11,2847-2854
DOI: 10.1039/D0PY00139B, Paper
Open Access
Brigitte A. G. Lamers, Marcin L. Ślęczkowski, Fabian Wouters, Tom A. P. Engels, E. W. Meijer, Anja R. A. Palmans
Linear polydimethylsiloxane (PDMS) is crosslinked by supramolecular grafts to obtain materials with strikingly different mechanical properties by tuning the strength of the non-covalent interactions.
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

Thermally triggerable, anchoring block copolymers for use in aqueous inkjet printing

Polym. Chem., 2020, 11,2869-2882
DOI: 10.1039/D0PY00244E, Paper
George E. Parkes, Helena J. Hutchins-Crawford, Claire Bourdin, Stuart Reynolds, Laura J. Leslie, Matthew J. Derry, Josephine L. Harries, Paul D. Topham
Towards the goal of shifting from toxic organic solvents to aqueous-based formulations in commercial inkjet printing, a series of well-defined amphiphilic block copolymers have been synthesized via RAFT polymerization.
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

Mechanical activation of polymers containing two adjacent mechanophores

Polym. Chem., 2020, 11,2864-2868
DOI: 10.1039/D0PY00279H, Paper
Richard Stevenson, Min Zhang, Guillaume De Bo
Polymers containing two adjacent mechanophores cleave at the same as a single-mechanophore chains.
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

Influence of surface charge on the formulation of elongated PEG-b-PDLLA nanoparticles

Polym. Chem., 2020, 11,2775-2780
DOI: 10.1039/D0PY00280A, Communication
Open Access
Roxane Ridolfo, David S. Williams, Jan C. M. van Hest
Amphiphilic PEG-PDLLA copolymers undergo assembly into polymersomes and can be transformed into tubular shapes using dialysis. By fine-tuning the shape change conditions also amine- and carboxylic acid modified polymersomes can now be effectively turned into tubes.
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

Correction: A facile PEG/thiol-functionalized nanographene oxide carrier with an appropriate glutathione-responsive switch

Polym. Chem., 2020, 11,2923-2923
DOI: 10.1039/D0PY90048F, Correction
Open Access
  This article is licensed under a Creative Commons Attribution 3.0 Unported Licence.
Bingjie Hao, Wei Li, Sen Zhang, Ying Zhu, Yongjun Li, Aishun Ding, Xiaoyu Huang
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

Biosignal-responsive polymer nanorods that specifically recognize hydrogen polysulfide (H2Sn) from reactive sulfur species

Polym. Chem., 2020, 11,2781-2785
DOI: 10.1039/D0PY00360C, Communication
Xi Liu, Wei Sang, Kunbing Ouyang, Qiang Yan
We report a new block copolymer bearing p-fluoronitrobenzoate (FNB) pendants that is capable of responding to the H2Sn biosignal in an extraordinarily selective and sensitive manner.
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

Polytriazine porous networks for effective iodine capture

Polym. Chem., 2020, 11,2786-2790
DOI: 10.1039/C9PY01948K, Communication
Chenchen Feng, Guangjuan Xu, Wei Xie, Shuran Zhang, Chan Yao, Yanhong Xu
Herein we present a rational strategy for the development of nitrogen-enriched conjugated microporous polymers (CMPs) (TBTT-CMP@1, 2 and 3) via a BH coupling reaction under mild conditions, for the super absorption of iodine. TBTT-CMP@1 exhibited iodine capture amount up to 442 wt%.
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

Incorporating trifunctional 1,6-heptadiyne moiety into polyacetylene ionomer for improving its physical and conductive properties

Polym. Chem., 2020, Advance Article
DOI: 10.1039/D0PY00109K, Paper
Hongfei Li, Hengchen Zhang, Xiaojuan Liao, Ruyi Sun, Meiran Xie
A trifunctional diyne comonomer can regulate the structure and optimize the physical state of polyacetylene ionomers, which exhibit a high ionic conductivity of 2.6 × 10−5–1.0 × 10−3 S cm−1 at 30 °C.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

Outstanding Reviewers for Polymer Chemistry in 2019

Polym. Chem., 2020, 11,2774-2774
DOI: 10.1039/D0PY90061C, Editorial

We would like to take this opportunity to highlight the Outstanding Reviewers for Polymer Chemistry in 2019, as selected by the editorial team for their significant contribution to the journal.
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

Aromatic thioketone-mediated radical polymerization of methacrylates and the preparation of amphiphilic quasi-block copolymers

Polym. Chem., 2020, Advance Article
DOI: 10.1039/D0PY00322K, Paper
Haoyu Yu, Jianwei Shao, Dong Chen, Li Wang, Wantai Yang
TfXT exhibits strong ability to control radical polymerization of methyl methacrylate and has been used in preparing amphiphilic quasi-block copolymer.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

Amide transformation as an efficient postpolymerization modification approach for the synthesis of functional polyacetylenes

Polym. Chem., 2020, Advance Article
DOI: 10.1039/D0PY00398K, Paper
Juntao Ren, Heng Liu, Xuequan Zhang, Yanming Hu, Guangyuan Zhou, Toshio Masuda
Modification of a precursor polyacetylene with various amines and alcohols through amide transformation gives access to a series of functional polymers showing nonlinear optical, luminescence, enhanced surface energy, and redox active properties.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

Alternating ring-opening copolymerization of epoxides with saturated and unsaturated cyclic anhydrides: reduced viscosity poly(propylene fumarate) oligomers for use in cDLP 3D printing

Polym. Chem., 2020, Advance Article
DOI: 10.1039/D0PY00453G, Paper
Yongjun Shin, Matthew L. Becker
A ring-opening copolymerization of propylene oxide with saturated and unsaturated anhydrides using Mg(BHT)2(THF)2 catalyst followed by an isomerization yields poly(propylene fumarate) (PPF) oligomers with improved properties for 3D printing.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

Sequential and alternating RAFT single unit monomer insertion: model trimers as the guide for discrete oligomer synthesis

Polym. Chem., 2020, Advance Article
DOI: 10.1039/D0PY00390E, Paper
Ruizhe Liu, Lei Zhang, Zixuan Huang, Jiangtao Xu
A complete set of model trimers and their synthetic kinetics are established to guide the synthesis of diverse sequence-defined polymers.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

Hierarchical self-assembled nanostructures of lactone-derived thiobarbiturate homopolymers for stimuli-responsive delivery applications

Polym. Chem., 2020, Advance Article
DOI: 10.1039/D0PY00367K, Paper
Piyali Mandal, Diptendu Patra, Raja Shunmugam
Hierarchical self-assembled nanostructures of lactone-derived thiobarbiturate homopolymers for stimuli-responsive delivery applications are shown.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

Tacticity dependence of single chain polymer folding

Polym. Chem., 2020, Advance Article
DOI: 10.1039/D0PY00133C, Paper
Open Access
Denis Danilov, Elaheh Sedghamiz, Heike Fliegl, Hendrik Frisch, Christopher Barner-Kowollik, Wolfgang Wenzel
Precision polymerization techniques offer the exciting opportunity to manufacture single-chain nanoparticles (SCNPs) with intramolecular crosslinks placed in specific positions along the polymer chain.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

Self-assembly of strawberry-like organic–inorganic hybrid particle clusters with directionally distributed bimetal and facile transformation of the core and corona

Polym. Chem., 2020, Advance Article
DOI: 10.1039/D0PY00237B, Paper
Shuxing Mei, Mingwang Pan, Juan Wang, Xiaopeng Zhang, Shaofeng Song, Chao Li, Gang Liu
Controllable structure of organic–inorganic hybrid particle clusters were successfully fabricated by self-assembly which derived from the strong interaction between carboxyl groups of the organic particles and amino groups of the inorganic particles.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

Polymersome formation induced by encapsulation of water-insoluble molecules within ABC triblock terpolymers

Polym. Chem., 2020, Advance Article
DOI: 10.1039/D0PY00426J, Paper
Rintaro Takahashi, Shotaro Miwa, Carsten Rössel, Shota Fujii, Ji Ha Lee, Felix H. Schacher, Kazuo Sakurai
We found a morphological transition from spherical micelles to polymersomes induced by encapsulation of hydrophobic guest molecules.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

A 3D printed drug delivery implant formed from a dynamic supramolecular polyurethane formulation

Polym. Chem., 2020, Advance Article
DOI: 10.1039/D0PY00068J, Paper
S. Salimi, Y. Wu, M. I. Evangelista Barreiros, A. A. Natfji, S. Khaled, R. Wildman, L. R. Hart, F. Greco, E. A. Clark, C. J. Roberts, W. Hayes
Prototype drug eluting implants have been 3D printed using a supramolecular polyurethane-PEG formulation. The implants are capable of releasing a pharmaceutical active with effective drug release over a period of up to 8.5 months.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

From isoselectivity to syndioselectivity: Lewis base regulates stereochemistry in 2-vinylpyridine polymerization

Polym. Chem., 2020, Advance Article
DOI: 10.1039/D0PY00320D, Paper
Yu Wang, Jiang-Bing Duan, Zhao-Xuan Liu, Tie-Qi Xu
We have developed an effective synthesis of syndiotactic poly(2-vinylpyridine) by a novel catalytic system. Switching from isoselective to syndioselective polymerization was achieved by adding Lewis base.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

Multi-photon polymerization of bio-inspired, thymol-functionalized hybrid materials with biocompatible and antimicrobial activity

Polym. Chem., 2020, Advance Article
DOI: 10.1039/D0PY00281J, Communication
Open Access
Kostas Parkatzidis, Maria Chatzinikolaidou, Eleftherios Koufakis, Maria Kaliva, Maria Farsari, Maria Vamvakaki
Thymyl-methacrylate functionalized, hybrid 3D scaffolds, fabricated by multi-photon lithography, exhibit excellent biocompatibility and antimicrobial action for bone and dental tissue engineering.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

Epoxy-functional diblock copolymer spheres, worms and vesicles via polymerization-induced self-assembly in mineral oil

Polym. Chem., 2020, Advance Article
DOI: 10.1039/D0PY00380H, Paper
Philip J. Docherty, Chloé Girou, Matthew J. Derry, Steven P. Armes
Epoxy-functional poly(stearyl methacrylate)-poly(glycidyl methacrylate) spheres, worms or vesicles can be prepared by RAFT dispersion polymerization of glycidyl methacrylate in mineral oil at 70 °C.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

Rapid production of block copolymer nano-objects via continuous-flow ultrafast RAFT dispersion polymerisation

Polym. Chem., 2020, Advance Article
DOI: 10.1039/D0PY00276C, Paper
Open Access
  This article is licensed under a Creative Commons Attribution 3.0 Unported Licence.
Sam Parkinson, Stephen T. Knox, Richard A. Bourne, Nicholas J. Warren
Continuous-flow reactors are exploited for conducting ultrafast RAFT dispersion polymerisation for the preparation of diblock copolymer nanoparticles.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

Comprehensive theoretical and experimental study of near infrared absorbing copolymers based on dithienosilole

Polym. Chem., 2020, Accepted Manuscript
DOI: 10.1039/D0PY00330A, Paper
Katarzyna Brymora, Wissem Khelifi, Sylvie Blanc, Lionel Hirsch, Antoine Bousquet, Christine Lartigau-Dagron, Frederic Castet
In recent contributions [Eur. Polym. J. 2013, 49, 4176; Macromolecules 2019, 52, 13, 4820], we reported a series of low band gap copolymers with the objective of shifting the absorption...
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

Correction: Flow-facilitated ring opening metathesis polymerization (ROMP) and post-polymerization modification reactions

Polym. Chem., 2020, Advance Article
DOI: 10.1039/D0PY90065F, Correction
Open Access
  This article is licensed under a Creative Commons Attribution 3.0 Unported Licence.
Selesha I. Subnaik, Christopher E. Hobbs
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

Fluorescent chemosensors based on conjugated polymers with N-heterocyclic moieties: two decades of progress

Polym. Chem., 2020, Advance Article
DOI: 10.1039/D0PY00336K, Review Article
Open Access
  This article is licensed under a Creative Commons Attribution 3.0 Unported Licence.
Taisheng Wang, Na Zhang, Wei Bai, Yinyin Bao
A brief summary of representative fluorescent chemosensors based on conjugated polymers with N-heterocyclic moieties, followed by a discussion on the limitations and challenges of current systems, as well as possible future research directions.
To cite this article before page numbers are assigned, use the DOI form of citation above.
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

Room Temperature Synthesis of Block Copolymer Nano-Objects with Different Morphologies via Ultrasound Initiated RAFT Polymerization-Induced Self-Assembly (Sono-RAFT-PISA)

Polym. Chem., 2020, Accepted Manuscript
DOI: 10.1039/D0PY00461H, Paper
Jing Wan, Bo Fan, Yiyi Liu, Tina Hsia, Kaiyuan Qin, Tanja Junkers, Boon M. Teo, San Thang
Polymerization-induced self-assembly (PISA), which allows scalable synthesis of nano-objects, has drawn significant research attention in the past decade. However, the initiation methods in most of the current reported PISA are...
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

Dibenzothiophene-S,S-Dioxide-Bispyridinium-Fluorene-Based Polyelectrolytes for Cathode Buffer Layers of Polymer Solar Cells

Polym. Chem., 2020, Accepted Manuscript
DOI: 10.1039/D0PY00416B, Paper
Guiting Chen, Dan Cheng, Wenyan Zou, Ziyan Cai, Yufeng Xie, Yaqi Chen, Baitian He, Hong-Qing Hao, Wei Yang, Yong Cao
Herein, a novel electron-deficient conjugated water/alcohol-soluble polyelectrolyte (WSPE) named as PFSOPyCl-E, consisting of dibenzothiophene-S,S-dioxide, bispyridinium salts and fluorene with ethylene oxide side chains, was presented. Previously we have synthesized another...
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

Optimizing the Thermoelectric Performance of Conjugated Polymer Backbones via Incorporating Tailored Platinum (II) Acetylides

Polym. Chem., 2020, Accepted Manuscript
DOI: 10.1039/D0PY00464B, Paper
Chunfa Liu, Xiaojun Yin, Jianwen Liu, Chunmei Gao, Lei Wang
Efforts to improve the electrical conductivity (σ) of the organic semiconductors propose the critical challenge for high performance organic thermoelectric (TE) devices. Herein, five new conjugated polymers incorporated with different...
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

Photo-induced copper mediated copolymerization of activated-ester methacrylate polymers and their use as reactive precursors to prepare multi-dentate ligands for the water transfer of inorganic nanoparticles

Polym. Chem., 2020, 11,2969-2985
DOI: 10.1039/D0PY00212G, Paper
Binh T. Mai, Markus J. Barthel, Aidin Lak, Tommaso Avellini, Ana Maria Panaite, Emille M. Rodrigues, Luca Goldoni, Teresa Pellegrino
Polymers bearing activated ester groups are synthesized using photo-ATRP and used as precursors for direct synthesis of multi-phosphonic acid functionalized ligands which are able to transfer different nanoparticles with distinct cores into water.
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

Viscoelastic and thermoreversible networks crosslinked by non-covalent interactions between “clickable” nucleic acid oligomers and DNA

Polym. Chem., 2020, 11,2959-2968
DOI: 10.1039/D0PY00165A, Paper
Alex J. Anderson, Heidi R. Culver, Stephanie J. Bryant, Christopher N. Bowman
An approach to efficient and scalable production of oligonucleotide-based gel networks is presented.
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

Effects of tacticity and chiral center-to-dipole distance on mesogen-free liquid crystalline self-assembly of sulfonyl-containing comb-like polymers

Polym. Chem., 2020, 11,3018-3031
DOI: 10.1039/D0PY00199F, Paper
Caleb A. Bohannon, Man-Hin Kwok, Ruipeng Li, Lei Zhu, Bin Zhao
Mesogen-free comb-like polyethers bearing strongly interacting mono- and di-sulfonylated side chains exhibit well-defined liquid crystalline self-assembly.
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

Development and disassembly of single and multiple acid-cleavable block copolymer nanoassemblies for drug delivery

Polym. Chem., 2020, 11,2934-2954
DOI: 10.1039/D0PY00234H, Review Article
Arman Moini Jazani, Jung Kwon Oh
Acid-degradable block copolymer-based nanoassemblies are promising intracellular candidates for tumor-targeting drug delivery as they exhibit the enhanced release of encapsulated drugs through their dissociation.
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

Synthesis of well-defined heteroglycopolymers via combining sequential click reactions and PPM: the effects of linker and heterogeneity on Con A binding

Polym. Chem., 2020, 11,3054-3065
DOI: 10.1039/D0PY00302F, Paper
Meina Liu, Xingyou Wang, Dengyun Miao, Caiyun Wang, Wei Deng
A versatile post- polymerization modification strategy to synthesize well-defined glycopolymers via the combination of RAFT polymerization and sequential CuAAC and thiol–ene click reactions was developed.
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

Metal-free polycycloaddition of aldehyde-activated internal diynes and diazides toward post-functionalizable poly(formyl-1,2,3-triazole)s

Polym. Chem., 2020, 11,3075-3083
DOI: 10.1039/D0PY00193G, Paper
Baixue Li, Anjun Qin, Ben Zhong Tang
A metal-free polycycloaddition of aldehyde-activated internal diynes and diazides was successfully established and post-functionalizable poly(formyl-1,2,3-triazole)s were readily produced.
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

Metallopolymer-block-oligosaccharide for sub-10 nm microphase separation

Polym. Chem., 2020, 11,2995-3002
DOI: 10.1039/D0PY00271B, Paper
Satoshi Katsuhara, Hiroaki Mamiya, Takuya Yamamoto, Kenji Tajima, Takuya Isono, Toshifumi Satoh
The novel high-χ BCPs comprising poly(vinyl ferrocene) and oligosaccharides formed hexagonal cylinder morphology with d values of ∼8 nm. Lamellar morphology with d values of ∼9 nm was also realized by mixing these polymers and glucose.
The content of this RSS Feed (c) The Royal Society of Chemistry




science and technology

Synthesis of conjugated polymers via cyclopentannulation reaction: promising materials for iodine adsorption

Polym. Chem., 2020, 11,3066-3074
DOI: 10.1039/D0PY00286K, Paper
Open Access
Noorullah Baig, Suchetha Shetty, Saleh Al-Mousawi, Bassam Alameddine
A new class of conjugated polymers is prepared by means of a versatile palladium-catalyzed cyclopentannulation reaction using a series of specially designed diethynyl aryl synthons with the commercially available 9,10-dibromoanthracene DBA monomer.
The content of this RSS Feed (c) The Royal Society of Chemistry